f



Building GCC-4.1.1 C/C++ compiler for LPC3180 + VFP + Embedded Linux

Hello,

I want to have a cross compiler running on my win32 cygwin, that can
cross compile C/C++ code for LPC3180 with VFP to run on embedded linux.


I downloaded gcc-4.1.1 source onto win32 cygwin (I dont even know if I
downloaded the right compiler source for the job), and started reading
the instructions on how to compile the compiler.  First it says you
have to configure the build, then build the compiler.

I'm not an expert and there are so many configuration parameters to
configure the build before building the actual compiler, that I know
will take me 100 years to figure out.

Does anybody have a clue on how to configure the build, then do the
build to build the gcc compiler that cross compiles C/C++ code for
LPC3180 with VFP for embedded linux.

Thanks
Over my head

0
nsmith9526 (10)
9/29/2006 1:52:40 AM
comp.arch.embedded 20047 articles. 1 followers. Post Follow

2 Replies
776 Views

Similar Articles

[PageSpeed] 20

smaddy wrote:
> Hello,
> 
> I want to have a cross compiler running on my win32 cygwin, that can
> cross compile C/C++ code for LPC3180 with VFP to run on embedded linux.
> 
> 
> I downloaded gcc-4.1.1 source onto win32 cygwin (I dont even know if I
> downloaded the right compiler source for the job), and started reading
> the instructions on how to compile the compiler.  First it says you
> have to configure the build, then build the compiler.
> 
> I'm not an expert and there are so many configuration parameters to
> configure the build before building the actual compiler, that I know
> will take me 100 years to figure out.
> 
> Does anybody have a clue on how to configure the build, then do the
> build to build the gcc compiler that cross compiles C/C++ code for
> LPC3180 with VFP for embedded linux.
> 
> Thanks
> Over my head
> 

Look for "buildroot" which is a mechanism to build cross
compilers, usually associated with ucLinux.

There is a "crosstools" script that could be useful as well.

-Dave

-- 
David Ashley                http://www.xdr.com/dash
Embedded linux, device drivers, system architecture
0
dash (43)
9/29/2006 3:45:33 AM
smaddy wrote:
> Hello,
>
> I want to have a cross compiler running on my win32 cygwin, that can
> cross compile C/C++ code for LPC3180 with VFP to run on embedded linux.

Just curious, what hardware platform are you running on?  Do you have a
specific buildroot for that lpc part?

0
rektide (22)
10/4/2006 4:45:52 PM
Reply:

Similar Artilces:

[ace-bugs] FW: building ACE 6.2.0/6.2.2 win XL C/C++ v12.1 on AIX7.1 results in compiler error when instantiating ace templates
--_004_80317163A516B94B988E1615F9FAFB1989DFD215otwlxg22opentex_ Content-Type: multipart/alternative; boundary="_000_80317163A516B94B988E1615F9FAFB1989DFD215otwlxg22opentex_" --_000_80317163A516B94B988E1615F9FAFB1989DFD215otwlxg22opentex_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable To: ace-bugs@list.isis.vanderbilt.edu<mailto:ace-bugs@list.isis.vanderbilt.= edu> Subject: [area]: [synopsis] ACE VERSION: 6.2.2 HOST MACHINE and OPERATING SYSTEM: AIX 7.1 TARGET MACHINE and OPERATING SYSTEM, if different from HOST: COMPILER NAME AND VERSION (AND PATCHLEVEL): THE $ACE_ROOT/ace/config.h FILE [if you use a link to a platform- specific file, simply state which one]: config.h -> config-aix-7.h THE $ACE_ROOT/include/makeinclude/platform_macros.GNU FILE [if you use a link to a platform-specific file, simply state which one (unless this isn't used in this case, e.g., with Microsoft Visual C++)]: platform_aix_ibm.GNU CONTENTS OF $ACE_ROOT/bin/MakeProjectCreator/config/default.features (used by MPC when you generate your own makefiles): AREA/CLASS/EXAMPLE AFFECTED: [What example failed? What module failed to compile?] DOES THE PROBLEM AFFECT: COMPILATION On Unix systems, did you run make realclean first? YES Our application fails to build with ACE6.2.0/6.2.2 on AIX 7.1 with AIX XL C= /C...

gcc-4.1.1/gcc/libgcc2.c:1956: undefined reference to `atexit'
Hi I am trying to build an Toolchain from source on my machine running on Fedora Core 5 . I am referring to the following link for the same : http://newsgroups.linuxbroker.com/index.php?tab=com&newsgroup=comp.os.linux.m68k&article=270 The Source's I'm using for my build are : build-uclinux-tools.sh binutils-2.16.tar.gz elf2flt-20060608.tar.gz gcc-4.1.1.tar.bz2 genromfs-0.5.1.tar.gz When I run the build-script, after a while, i end up with the following error : make[1]: Leaving directory `/uClinux/uClinux-dist' m68k-uclinux-gcc -nostartfiles -o lib/libc -I/uClinux/uClinux-dist/linux-2.6.x/include -m5200 -mid-shared-library \ -mid-shared-library -mshared-library-id=0 \ -Wl,-elf2flt -nostdlib -Wl,-shared-lib-id,1 \ lib/main.o \ -Wl,--whole-archive,lib/libc.a,-lgcc,--no-whole-archive lib/libc.elf2flt: In function `__do_global_ctors': /uClinux/gcc-4.1.1/gcc/libgcc2.c:1956: undefined reference to `atexit' collect2: ld returned 1 exit status make: *** [lib/libc] Error 1 I have been able to fix / patch a couple of the other errors, but havent reached anywhere with this one. any help or pointers to fix it will be appreciated. regards krish. ...

C.7.6.3.1.4 Pixel Data and C.7.6.2.1.1 Image Position And Image Orientation
Dear All, How should I reconcile the definitions of image coordinates in the "Pixel Data" and "Image Position and Image Orientation" sections of the 2009 DICOM standard? "Pixel Data" says that the pixels are labelled: (1,1) (1,2) (1,3) (1,4) etc. (2,1) (2,2) (2,3) (2,4) etc. etc. i.e. (row starting at 1, column starting at 1) But the formula on the "Image Position And Image Orientation" section it say is said to determine "The mapping of pixel location (i, j)" but WHERE i Column index to the image plane. The first column is index zero. and j Row index to the image plane. The first row index is zero. Should the image data be considered to be indexed from 0 or from 1? Should the pixel coordinates (i,j) be (row, col) or (col, row)? Many thanks, Dr Chris Rodgers University of Oxford. -- QUOTE from the standard -- ftp://medical.nema.org/medical/dicom/2009/09_03pu3.pdf C.7.6.3.1.4 Pixel Data Pixel Data (7FE0,0010) for this image. The order of pixels sent for each image plane is left to right, top to bottom, i.e., the upper left pixel (labeled 1,1) is sent first followed by the remainder of row 1, followed by the first pixel of row 2 (labeled 2,1) then the remainder of row 2 and so on. For multi-plane images see Planar Configuration (0028,0006) in this Section. C.7.6.2.1.1 Image Position And Image Orientation .... The Image Plane Attributes, in conjunction with...

Available consultant immediately with us( 4 Oracle, 1 C/C++, 1 SAP SD )
Contact : Mandar Direct : 402 408 6601/402 408 3687 Email : mandar@kraftware.com Hi, We have the following consultant available immediately. 1) Oracle HRMS techno - functional 2) Oracle Apps Financial functional 3) Oracle HRMS functional 4) Oracle PL/SQL 5) C/C++ 6) SAP SD and SAP CRM consultant Please feel free to contact us for additional information. Thanks & Regards, Mandar Kraftware Inc, Direct- 402 408 6601/402 408 3687 Email - mandar@kraftware.com ...

Available consultant immediately with us( 4 Oracle, 1 C/C++, 1 SAP SD ) #2
Contact : Mandar Direct : 402 408 6601/402 408 3687 Email : mandar@kraftware.com Hi, We have the following consultant available immediately. 1) Oracle HRMS techno - functional 2) Oracle Apps Financial functional 3) Oracle HRMS functional 4) Oracle PL/SQL 5) C/C++ 6) SAP SD and SAP CRM consultant Please feel free to contact us for additional information. Thanks & Regards, Mandar Kraftware Inc, Direct- 402 408 6601/402 408 3687 Email - mandar@kraftware.com On 15 May 2007 11:56:13 -0700, "mandarkraftware@gmail.com" <mandarkraftware@gmail.com> wrote: Everyone please return this post to this dratted spammer everytime he spams, so his mailbox blows up. -- Sybrand Bakker Senior Oracle DBA On May 15, 1:41 pm, sybra...@hccnet.nl wrote: > On 15 May 2007 11:56:13 -0700, "mandarkraftw...@gmail.com" > > <mandarkraftw...@gmail.com> wrote: > > Everyone please return this post to this dratted spammer everytime he > spams, so his mailbox blows up. > > -- > > Sybrand Bakker > Senior Oracle DBA In fact, perhaps everyone should post to this fellow the terms of service for gmail http://mail.google.com/mail/help/intl/en/terms_of_use.html , which says it is explicitly for personal use only. Maybe copying google's lawyers might help too http://pview.findlaw.com/cmd/profileview?xsl=/xsl/lawyer_emailform.xsl&wld_id=3350629_1&which=email_addr:1&c...

C.8.16.1 Image Type and Frame Type vs C.8.16.1.4 Derived Pixel Contrast
There is a small inconsistency in between =A7C.8.16.1 Image Type and Frame = Type and =A7C.8.16.1.4 Derived Pixel Contrast: [...] Image Type (0008,0008) and Frame Type (0008,9007) shall consist of four non= -zero length values. [...] while [...] Value 4 of Image Type (0008,0008) and Value 4 of Frame Type (0008,9007) sha= ll not be zero length unless the SOP Class UID is "1.2.840.10008.5.1.4.1.1.= 2.2" or "1.2.840.10008.5.1.4.1.1.4.4" or "1.2.840.10008.5.1.4.1.1.128.1" (L= egacy Converted). [...] Thanks Mathieu I will put in a CP about this. David On Tuesday, December 8, 2015 at 4:32:29 AM UTC-5, Mathieu Malaterre wrote: > There is a small inconsistency in between =A7C.8.16.1 Image Type and Fram= e Type and =A7C.8.16.1.4 Derived Pixel Contrast: >=20 > [...] > Image Type (0008,0008) and Frame Type (0008,9007) shall consist of four n= on-zero length values. > [...] >=20 > while >=20 > [...] > Value 4 of Image Type (0008,0008) and Value 4 of Frame Type (0008,9007) s= hall not be zero length unless the SOP Class UID is "1.2.840.10008.5.1.4.1.= 1.2.2" or "1.2.840.10008.5.1.4.1.1.4.4" or "1.2.840.10008.5.1.4.1.1.128.1" = (Legacy Converted). > [...] ...

build jdk 1.3.1 or 1.4.1 on freebsd 5.1-release :(
Hi, I'm not able to build sun java jdk 1.3.1 on FreeBSD 5.1 release, here is the error message: ===> Applying FreeBSD patches for jdk-1.3.1p8_2 ===> jdk-1.3.1p8_2 depends on executable: gm4 - found ===> jdk-1.3.1p8_2 depends on executable: zip - found ===> jdk-1.3.1p8_2 depends on file: /usr/X11R6/lib/libXm.so - found ===> jdk-1.3.1p8_2 depends on executable: msgfmt - found ===> jdk-1.3.1p8_2 depends on file: /usr/local/diablo-jdk1.3.1/bin/javac - not found ===> Verifying install for /usr/local/diablo-jdk1.3.1/bin/javac in /usr/ports/java/diablo-jdk13 ===> diablo-jdk-1.3.1.0 : Because of licensing restrictions, you must fetch the distribution manually. Please access http://www.FreeBSDFoundation.org/cgi-bin/download.cgi?package=diablo-caffe-1.3.1-0.tar.bz2 with a web browser and "Accept" the End User License Agreement for "Caffe Diablo ". Please place the downloaded diablo-caffe-1.3.1-0.tar.bz2 in /usr/ports/distfiles. ..*** Error code 1 Stop in /usr/ports/java/diablo-jdk13. *** Error code 1 Stop in /usr/ports/java/jdk13. ----------------------------------------------------- It 's mentionned that I should download diablo-caffe-1.3.1etc... but this release is not for FreeBSD5 So I tried to install jdk 1.4.1 and here is the output: ------------------------------------------------------------------------------ External File/Binary Locations: HOTSPOT_SERVER_PAT...

Borland C/C++ Compiler 3.1
This is a multi-part message in MIME format. ------=_NextPart_000_0084_01C3D12D.B9B97B20 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Folks I am in desparite need of a cp of TC 3.1 for DOS (yes DOS). Does that = version include ASM, Debugger etc Cheers, Bryan ------=_NextPart_000_0084_01C3D12D.B9B97B20 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DConten...

1.1.1.1 ?
hi my firewall logs dropped packets from an internal IP address trying to contact 1.1.1.1 through port 9999. Any ideas whether 1.1.1.1 is valid IP? and what is port 9999?? thanks mike wrote: > hi > > my firewall logs dropped packets from an internal IP address trying to > contact 1.1.1.1 through port 9999. Any ideas whether 1.1.1.1 is valid > IP? and what is port 9999?? > thanks These trojans *BlitzNet*, *Backdoor.Oracle*, *Backdoor.Spadeace* uses port 9999 -- S.S. "StarScripter" <Star@privacy.net> wrote in message news:<bv8ejj$p54t3$1@ID-185702.news.uni-berlin.de>... > mike wrote: > > hi > > > > my firewall logs dropped packets from an internal IP address trying to > > contact 1.1.1.1 through port 9999. Any ideas whether 1.1.1.1 is valid > > IP? and what is port 9999?? > > thanks > > These trojans *BlitzNet*, *Backdoor.Oracle*, *Backdoor.Spadeace* uses port > 9999 thanks very much..will check it out ...

GCC 4.4.1 linux to mingw32 cross compiler gnat
Hello All, I'm struggling in getting my GCC 4.4.1 x86_64-pc-linux-gnu to i686-pc- mingw32 cross-compiler to work with Ada; First, I successfully installed and bootstrapped binutils, mingw- runtime and w32api and put those in my PATH I've compiled pristine FSF gcc sources with --enable-threads --enable- languages=c,c++,fortran,java,ada --enable-libada --enable-libgcj -- enable-libgomp --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --target=i686-pc-mingw32 --prefix=/usr/local/cross-tools/i686-pc- mingw32 After installing, i tired test.adb: with Ada.Text_IO; use Ada.Text_IO; Procedure test is Begin Put_Line("Hello world"); End test; i686-pc-mingw32-gnatmake gives me: i686-pc-mingw32-gcc -c test.adb i686-pc-mingw32-gnatmake: "test.ali" incompatible ALI file, please recompile i686-pc-mingw32-gnatmake: "test.adb" compilation error test.ali looks like this (first few lines) V "GNAT Lib v4.4" M P W=b P SS R nnnnnnnnnnnnnnnnnnnnnnvnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn U test%b test.adb 00d000d0 NE OO SU IL KM W ada%s ada.ads ada.ali W ada.text_io%s a-textio.adb a-textio.ali D ada.ads 20070406091342 9c7dd3ea D a-except.ads 20090409232307 b54b55de For comparison, the contents of the installed text_io.ali in the i686- pc-mingw32 dirs is i V "GNAT Lib v4.4" A -gnatwa A -O2 A -W A -Wall A ...

Mex yprime.c compile failed matlab r2010a mac os x 10.6.6 xcode 4 gcc v4.2.1
Dear all, I am new to this topic. I just wanted to follow the steps to build a mex file from my mac. I am using a matlab r2010a on a mac with os x 10.6.6. I have the xcode4 installed. After typed in mex -setup in the matlab prompt, the output are as follows, Options files control which compiler to use, the compiler and link command options, and the runtime libraries to link against. Using the 'mex -setup' command selects an options file that is placed in ~/.matlab/R2010a and used by default for 'mex'. An options file in the current working directory or spe...

GUI for Turbo C++ 1.01/OW 1.7 C++?
Simply, where do I download one? I want it for the VGA16 screen mode. ----------- Joseph Rose, a.k.a. Harry Potter Working magic in the computer community...or at least trying to! :( On Tue, 21 Jul 2009 09:40:40 -0700, Harry Potter wrote: > Simply, where do I download one? I want it for the VGA16 screen mode. Define "GUI". I think you mean something besides "GUI" - maybe IDE (Integrated Developent Environment), but the DOS IDE versions are not graphical - that pretty much takes an OS with a Graphical User Interface, something like Windows. -- T.E....

i=infinity;0= i*sin k*pi, 1=cos k*pi, k=m/n, n=4,m=0-00; c*G=20=const, 1/sgrt2>G>0.5, 6<N = NA ^2surf/NAvol<7 ; h/N =11=const, e+i*pi; D universe =f(h)*1/ (a))^4, T=f( m, S, D)
Please give me a direction - am I totally lost in my own world and have spent 6 months in vain trying to figure this out, or is there a fruit of truth hidden somewhere? Excuse me for rapid end of some sentences and chaotic appearance of equations- i am just tired. I have spent 1 month practically thinking only about 1 thing. I need some rest and support. On other hand, this chaotically ordered text is good as it will cause confusion and will stretch imagination:) Approximately 50% of the following text is obviously right > 37,5%-is subjective <12,5%- optional Approximately 50% of peop...

VSPWorks v4.5.1 (c) Wind River, visualSTATE v5.0.7.88 (C) IAR, LOGIC DESIGN AND VERIFICATION V5.1 (c) CADENCE, other
VSPWorks v4.5.1 (c) Wind River, visualSTATE v5.0.7.88 (C) IAR, LOGIC DESIGN AND VERIFICATION V5.1 (c) CADENCE, other ... 05/Jan/2004 VSPWorks v4.5.1 (c) Wind River LOGIC DESIGN AND VERIFICATION V5.1 (c) CADENCE RSV507A.ZIP 21851 09- 5-03 11| visualSTATE v5.0.7.88 (C) IAR [xx/08] Microcap 7.16, 8051.IDE.v1.20.WinALL, I-LOGIX_STATEMATE_V3.2, Tasking Debuggers, Compilers, IDE, Tools, Embedded Development Environment (EDE), CADENCE ORCAD UNISON SUITE PRO V10.0 - new !, Xilinx ISE 6.1i [2 CDs] - new !, PCB DESIGN STUDIO V15.0 *UPDATED* - CADENCE [2 CDs], Rhapsody v4.1 MR2 - I-Logix, CAM350 v7.6, EWB5.12C, 6.xx, Multisim V2001, IAR Embedded Workbench 2001-2002,TORNADO 10CDs, Eagle411, PCB, PLCSIM, KEIL, EPLAN PROFESSIONAL V5.5 - new ! PCB DESIGN STUDIO V15.0 - CADENCE [3 CDs], and PCB DESIGN STUDIO V15.0 *UPDATED* - CADENCE [2 CDs] DownStream CAM350 v7.6 KEIL SOFTWARE 8051 V7.0 AND C16X ST10 V4.2.PRO (c) SDK 11 540 2001 - v2.31C, v2.31 2002 - v2.31C FOR ZILOG Z80 v4.06A, ARM V3.11A, AVR V2.27B, eZ80 V1.15A, M32C V2.10A, PIC18 V2.10A, CR16C V1.12A, H8 V1.53E, MSP430 V1.26A, Eagle V4.11,Rhapsody v4.01,Tasking, Compilers, Debuggers, XILINX, Embedded Development Environment PCB, VHDL, FPGA, IAR, EPLAN 5.40SP1, SIEMENS STEP 7, PLC SIM EAGLE v4.11 Professional Bilingual - Cadsoft ISE V5.1I FOUNDATION (c) XILINX [3 CDs] 10 101 XiliNX Embedded Development Kit NFO.Fix 11 058 Xilinx ...

GCCSDK GCC 4.1.1 Release 1
I'm happy to announce the release of GCCSDK GCC 4.1.1 Release 1, a port of the GCC 4.1.1 C and C++ compiler and binutils 2.17 for RISC OS as cross-compiler for various platforms but also as native RISC OS compiler. You can use this port to develop RISC OS command line programs, Wimp applications and modules using SharedCLibrary or UnixLib as runtime library. Compared to the previous stable release of GCCSDK (based on GCC 3.4.6) the main difference is that the object file format is now based on ELF (<URL:http://en.wikipedia.org/wiki/Executable_and_Linkable_Format>) instead of on AOF (Acorn Object Format). The ELF format will allow the use of shared libraries which will be made available in a next release as it is currently undergoing the last remaining testing. Other significant improvements were made in UnixLib and module code generation. Download information for RISC OS binaries and sources can be found at <URL:http://www.riscos.info/index.php/GCCSDK_Releases>. GCCSDK Project home: <URL:http://gccsdk.riscos.info/> John Tytgat, on behalf of all GCCSDK developers. -- John Tytgat, in his comfy chair at home BASS John.Tytgat@aaug.net ARM powered, RISC OS driven _______________________________________________________________ a.m.conroy@argonet.co.uk, Moderator of comp.sys.acorn.announce. Submissions to csaa@owlart.net Related mail to csaa-request@owlart.net ...

Trouble Installing Linux/Cisco VPN Client Has anyone had trouble compiling the linux cisco vpn client? Here is the output of the install script: # uname -rviosm Linux 2.4.22-1.2188.nptl #1
Has anyone had trouble compiling the linux cisco vpn client? Here is the output of the install script: # uname -rviosm Linux 2.4.22-1.2188.nptl #1 Wed Apr 21 20:19:18 EDT 2004 x86_64 x86_64 GNU/Linux ../vpn_install Cisco Systems VPN Client Version 4.0.3 (B) Linux Installer Copyright (C) 1998-2001 Cisco Systems, Inc. All Rights Reserved. By installing this product you agree that you have read the license.txt file (The VPN Client license) and will comply with its terms. Directory where binaries will be installed [/usr/local/bin] Automatically start the VPN service at boot time [yes] In order to build the VPN kernel module, you must have the kernel headers for the version of the kernel you are running. For RedHat 6.x users these files are installed in /usr/src/linux by default For RedHat 7.x users these files are installed in /usr/src/linux-2.4 by default For Suse 7.3 users these files are installed in /usr/src/linux-2.4.10.SuSE by de fault Directory containing linux kernel source code [/lib/modules/2.4.22-1.2188.nptl/b uild] * Binaries will be installed in "/usr/local/bin". * Modules will be installed in "/lib/modules/2.4.22-1.2188.nptl/CiscoVPN". * The VPN service will be started AUTOMATICALLY at boot time. * Kernel source from "/lib/modules/2.4.22-1.2188.nptl/build" will be used to bui ld the module. Is the above correct [y] y Making module In file included from Cniapi.h:15, from linuxcniapi.c:24: GenDefs.h...

Serialization between Java 1.1.4 and Java 1.4.1
Hello, It seems to me to be in some kinda trouble. I wanted to implement communication between Java applet and Server through sockets and Serialization. So, I serialize Object, send it to server which deserialize it with no problems. In other direction problems came out since Object serialized under Java 1.4.1 seems to be not deserializable under Java 1.1.4. (MS VM). If applet si run under J2, there are no problems, but I cannot push people to download some 15MB of new JRE just to accomplish my requirements, especially if applet needs not implementation of features of new JRE... ...

Compiling GNAT GPL 2006 into GCC 4.1.1
This is my first attempt at actually compiling GNAT, so I'm coming here for any insight into the process. I'm currently using a non-Ada GCC 4.1.1 and would really like to get GNAT up and running so I can start developing in my favorite language again. (My GNU/Linux box is based on Linux From Scratch, and it's only been recently that I've been able to acquire the GNAT sources to set up a _real_ compiler.) Like any good technophile, I would really like to use the latest GNAT sources from AdaCore as I'm eager to utilize the new features from the Ada 2005/2006 standard. Herein lies the problem... AdaCore only provides information on building their release sources into the 3.4.6 series GCC release, with absolutely no information on the 4.x series of compilers. The sane route is likely to say, ``Alright, I'll just go ahead and use GCC 3.4.6 for GNAT and 4.1.1 otherwise,'' but I really can't stand the thought of having two GCC builds around like that, where I could instead have a beautifully integrated environment. On top of that, I hate the thought of being forced to use obsolete technology, either an old GCC or Ada95 when an Ada 2005/2006 compiler is available. Now, normally I'd just go for it, replacing files in the GCC tree with the AdaCore files where necessary (ada directory, etc), however there are specific .dif files and such provided for the 3.4 GCC which most assuredly do not work with GCC 4.1.1. As I imagine this could crea...

tao naming service build problem (ACE-5.4.1+TAO-1.4.1)
Sorry but i haven't access to comp.object.corba.tao so i post the question here. During build of orb services the following error occured: [...skipped...] .... make[3]: Leaving directory `/tao/tao/orbsvcs/orbsvcs' make -f Makefile.CosNaming all make[3]: Entering directory `/tao/tao/orbsvcs/orbsvcs' Makefile: /tao/tao/orbsvcs/orbsvcs/Makefile.CosNaming rm -f .shobj//libTAO_CosNaming.dll.def.old ..shobj//libTAO_CosNaming.dll.def; dll tool --export-all --output-def .shobj//libTAO_CosNaming.dll.def --dllname libTAO _CosNaming.dll .shobj/Naming/Naming_Context_...

[ace-bugs] Many compiler warnings when compiling 5.4.4 with gcc 3.4.1
ACE VERSION: 5.4.4 HOST MACHINE and OPERATING SYSTEM: If on Windows based OS's, which version of WINSOCK do you use?: Solaris 2.8 TARGET MACHINE and OPERATING SYSTEM, if different from HOST: COMPILER NAME AND VERSION (AND PATCHLEVEL): CONTENTS OF $ACE_ROOT/ace/config.h [if you use a link to a platform- specific file, simply state which one]: // The following configuration file is designed to work for SunOS 5.8 // (Solaris 8) platforms using the SunC++ 4.x, 5.x, 6.x, or g++ compilers. #ifndef ACE_CONFIG_H #define ACE_HAS_NONSTATIC_OBJECT_MANAGER 1 // ACE_CONFIG_H is defined by one of the following #included headers. // #include the SunOS 5.8 config, then add any local updates below. #include "ace/config-sunos5.8.h" #define ACE_LACKS_ACE_IOSTREAM 1 #define ACE_LACKS_IOSTREAM_TOTALLY 1 #define ACE_NTRACE 0 // gcc doesn't define the following types typedef long t_scalar_t; /* historical versions */ typedef unsigned long t_uscalar_t; typedef void *timeout_id_t; typedef long blksize_t; /* used for block sizes */ #endif /* ACE_CONFIG_H */ CONTENTS OF $ACE_ROOT/include/makeinclude/platform_macros.GNU (unless this isn't used in this case, e.g., with Microsoft Visual C++): linked to platform_sunos5_g++.GNU CONTENTS OF $ACE_ROOT/bin/MakeProjectCreator/config/default.features (used by MPC when you generate your own...

real-time monitoring of propriety system: embedding python in C or embedding C in python?
Hi Group, at work, we are thinking to replace some legacy application, which is a hom= e-grown scripting language for monitoring and controlling a large experimen= t. It is able to read live data from sensors, do some simple logic and calc= ulations, send commands to other subsystems and finally generate some new s= ignals. The way it is implemented is that it gets a chunk of 1 second of da= ta (thousands of signals at sample rates from 1Hz to several kHz), does som= e simple calculations on selected signals, does some simple logic, sends so= me commands and finally computes some 1Hz output signals, all before the ne= xt chunk of data arrives. The purpose is mainly to monitor other fast proce= sses and adjust things like process gains and set-points, like in a SCADA s= ystem. (I know about systems like Epics and Tango, but I cannot use those i= n the near future.) It can be considered soft-real time: it is desirable th= at the computation finishes within the next second most of the time, but if= the deadline is missed occasionally, nothing bad should happen. The curren= t system is hard to maintain and is limited in capabilities (no advanced ma= th, no sub-functions, ...). I hope I don't have to convince you that python would be the perfect langua= ge to replace such a home-grown scripting language, especially since you th= an get all the power of tools like numpy, logging and interface to database= s for free. Convincing my colleagues might cost ...

Re: [ace-bugs] Many compiler warnings when compiling 5.4.4 with gcc 3.4.1
Hi Peter, Thanks for using the PRF. >> ACE VERSION: 5.4.4 >> >> HOST MACHINE and OPERATING SYSTEM: >> If on Windows based OS's, which version of WINSOCK do you >> use?: >> >> Solaris 2.8 >> >> TARGET MACHINE and OPERATING SYSTEM, if different from HOST: >> COMPILER NAME AND VERSION (AND PATCHLEVEL): >> >> CONTENTS OF $ACE_ROOT/ace/config.h [if you use a link to a platform- >> specific file, simply state which one]: >> >> // The following configuration file is designed to work for SunOS 5.8 >> // (Solaris 8) platforms using the SunC++ 4.x, 5.x, 6.x, or g++ compilers. >> >> #ifndef ACE_CONFIG_H >> >> #define ACE_HAS_NONSTATIC_OBJECT_MANAGER 1 >> >> // ACE_CONFIG_H is defined by one of the following #included headers. >> >> // #include the SunOS 5.8 config, then add any local updates below. >> #include "ace/config-sunos5.8.h" >> >> #define ACE_LACKS_ACE_IOSTREAM 1 >> #define ACE_LACKS_IOSTREAM_TOTALLY 1 >> #define ACE_NTRACE 0 >> >> // gcc doesn't define the following types >> >> typedef long t_scalar_t; /* historical versions */ >> typedef unsigned long t_uscalar_t; >> typedef void *timeout_id_t; >> typedef long blksiz...

Re: [ace-users] how to compile ACE using Intel C Plus Plus Compiler 9.1 on windows and Linux ?
Hi, Have a look at the scoreboard, there you find the Intel C++ builds Remedy IT has running (see http://www.dre.vanderbilt.edu/scoreboard/integrated.html and http://remedy.nl). We don't have explicit documentation about Intel C++, on windows it emulates msvc, on linux gcc. We deliver commercial support for Intel C++, see www.theaceorb.nl for our services. Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl *** Next ACE Training May 7-10, see www.theaceorb.nl *** *** Commercial service and support for ACE/TAO/CIAO *** <hongxing777@gmail.com> wrote in message news:<1177396730.223186.19290@c18g2000prb.googlegroups.com>... > Version: 5.5.6 > host: windows xp sp2, suse linux enterprise server 9 sp2 > compiler: vs.net 2003, gcc 3.3.3 > > how to compile ACE using Intel C Plus Plus Compiler 9.1 on windows and > Linux ? > is there any documents that discribes it? > > thanks! > On Apr 24, 2:47 pm, "Johnny Willemsen" <jwillem...@remedy.nl> wrote: > Hi, > > Have a look at the scoreboard, there you find the Intel C++ builds Remedy IT > has running (seehttp://www.dre.vanderbilt.edu/scoreboard/integrated.html > andhttp://remedy.nl). We don't have explicit documentation about Intel C++, > on windows it emulates msvc, on linux gcc. We deliver commercial support for > Intel C++, seew...

Picoblaze C compiler 1.8.4
Hi all, for the picoblaze funs... you can download the latest version of picoblaze C compiler on my website www.poderico.co.uk the latest version is 1.8.4 In this version you have the optimizer (just started) I've got an example how to use the LCD IF on the Spartan3E starter kit... if you want to have a try.. please send me an email for any suggestions... or improvement... Have fun, Francesco Quesito wrote: > Hi all, > for the picoblaze funs... > you can download the latest version of picoblaze C compiler on my > website > www.poderico.co.uk > the latest version is ...

Web resources about - Building GCC-4.1.1 C/C++ compiler for LPC3180 + VFP + Embedded Linux - comp.arch.embedded

Auditorium Building - Wikipedia, the free encyclopedia
... -87.6251722 Coordinates : 41°52′33.95″N 87°37′30.62″W  /  41.8760972°N 87.6251722°W  / 41.8760972; -87.6251722 The Auditorium Building in ...

Billionaire Indian couple's crumbled dream of building Australia's biggest home
They were the jet-setting, glamorous couple from New Delhi planning to build Australia's biggest home when it all went terribly wrong.

How a Dental Company Is Building Its Brand With Content Marketing
In the spirt of the famous song, 'It's Five O'clock Somewhere," the same idea can be applied to content. Somewhere, somebody is looking for information ...

Report: Google is building an Amazon Echo clone, Nest has a security system
... "Siri in a box." Google has all of the voice tech nailed down from its efforts on Android and Google.com, so it's easy to imagine building the ...

Google is reportedly building a livestreaming app like Periscope
Google is reportedly working on an app named "YouTube Connect" that will let YouTube users livestream events to their channel, VentureBeat reports ...

How Home Depot is building customer experience from the outside in
The retailer's growth strategy hinges on the success of what CEO Craig Menear calls "One Home Depot." Here's what making good on that strategy ...

GE Is Building America’s First Offshore Wind Farm
... bumpy, with very little to show for the efforts. The collapse of the Cape Wind project left many both within and without [&hellip GE Is Building ...

How Home Depot is building customer experience from the outside in
At the CIO Perspectives event in Atlanta, Home Depot CIO Matt Carey sat down for a fireside chat with Maryfran Johnson, editor-in-chief of CIO ...

Get really good at building apps with Ruby, by building real apps
Ruby on Rails is the language that powers most of the web apps you use every day. If you’re looking to get involved in web development, learning ...

6 Lessons From Building A Media Empire
Mona Scott-Young has made her mark in the male-dominated world of hip-hop. Here, she shares her hard-won lessons. Mona Scott-Young is a multi-tasking ...

Resources last updated: 3/25/2016 6:15:39 PM