How translate sdt iii files to orcad 9.2 0 134 (7/17/2003 11:05:59 PM)
Hello, I have a lot off old lib and sch files in orcad 3.22 but don't know how to convert them into my new computer running in windows 98 with orcad 9.2 who can help me. best regards martin \ ...
m.d.meijer (1)

analog artist window size 1 56 (7/17/2003 2:13:30 PM)
Hi All, I did not find so far a way to get the analog-artist window to display more outputs , and more design variables. Of course it would be much better if the window could just strech normally. (It prob...
eda

hierarchical POWER_GROUP 0 50 (7/17/2003 3:47:56 PM)
Hello All. In previous versions of Concept/Allegro, we can put POWER_GROUP to hierarchical blocks. By this way, all matching power_group/power_pins were attached to the new power defined on the top block. But...
William.Billereau (2)

Shapes creation skill or Assura? 2 64 (7/16/2003 11:19:59 PM)
I have to satisfy a groudrule for minimum area on M2 wires. We are using a wiring tool that sometimes creates stacked vias from M1 to M3. This leaves a .9x.9 m2 shape. I would like to write some post...
mike.russell (10)

enforcing autoroute directions? 0 62 (7/17/2003 5:33:48 AM)
I recently started using the Virtuoso Custom Router 11.0. I've set up a ..rul file with the routing layers, vias, etc. and I am able to get simple cells to route with no problem. However, it totally ignores m...
bsl (1)

How to fix this problem in Synopsys? 2 64 (7/14/2003 5:12:27 PM)
Hello, In schemetic view of Synopsys Design Analyzer, when I double click the designware component, why sysnopsys gives me a message "reference is not available"?How to fix this problem?thanks ...
yxl44441 (3)

HP DESIGNJET 2500CP PLOTTER / PRINTER for sale!! Located in Australia 0 48 (7/15/2003 1:20:03 PM)
I have a HP DESIGNJET 2500CP 36-inch Photo-Quality Plotter / Printer listed on AUSTRALIA eBay auction site. Starting Bid: $1 NO RESERVE AUCTION! AUCTION ENDS: 16 JULY 2003 at 8:30PM (evening, Sydney time). P...
printopia (1)

measureResistance Diva 2 59 (7/11/2003 4:16:15 PM)
any examples of the use of measureResistance in DIVA ? Juan F. Osorio Ph. D. Student Technical University of Catalonia http://pmos.upc.es/blues/ ...
jfosorio (4)

Help req with Segmentation fault 1 138 (7/14/2003 6:54:11 PM)
Hi, I am a newbie trying to work on Cadence Virtuoso Layout and came across a problem which I am not able to fix. I thought some of you might be able to help me in this regard. The following are the steps I had...
kumary (11)

how_to_add_instance 2 57 (7/12/2003 5:05:11 AM)
hello there, we are having ic 5.0.0 ,how to add a instance in ic 5.0.0 virtuoso schematic tool?. while i tried to add thro the edit->probe->add instance i can't browse for the cadence libraries such as anaolo...
selvakumar_in (20)