f



error in cadence simulation

Dear all,
I was trying to run a simple simulation in cadence Spectre. I got the
following error. Any idea what it could mean?.
/***********************
*Error* Errors encountered during simulation. The simulator run log
has not been generated.
Possible cause could be an invalid command line option for the version
of the simulator
specified in the userCmdLineOption field are supported for the
simulator.
Alternatively, run the simulator standalone using the runSimulation
file in the netlist
directory to know the exact cause of the error.
/***********************
Since I'm new to schematic, I'm not sure about the error. I also tried
running the netlist as said in the error message, but it didn't work(I
tried simulating both 'input.scs' and 'runSimualtion' file ).
/cad/tools/cadencetools/mmsim_6_1/tools/bin/spectre: line 180:  8906
Killed                  /cad/tools/cadencetools/mmsim_6_1/tools.lnx86/
spectre/bin/spectre input.scs

Thanks and regards,
Lokesh
0
lokeshraje (93)
3/26/2010 11:33:49 AM
comp.cad.cadence 5429 articles. 8 followers. Post Follow

0 Replies
1308 Views

Similar Articles

[PageSpeed] 9

Reply:

Similar Artilces:

error in cadence simulation #2
Dear all, I was trying to run a simple simulation in cadence Spectre. I got the following error. Any idea what it could mean?. /*********************** *Error* Errors encountered during simulation. The simulator run log has not been generated. Possible cause could be an invalid command line option for the version of the simulator specified in the userCmdLineOption field are supported for the simulator. Alternatively, run the simulator standalone using the runSimulation file in the netlist directory to know the exact cause of the error. /*********************** Since I'm new to schematic, I'm not sure about the error. I also tried running the netlist as said in the error message, but it didn't work(I tried simulating both 'input.scs' and 'runSimualtion' file ). The following is the error message i got when i tried to run the simulation in the netlist directory /************************** /cad/tools/cadencetools/mmsim_6_1/tools/bin/spectre: line 180: 8906 Killed /cad/tools/cadencetools/mmsim_6_1/tools.lnx86/ spectre/bin/spectre input.scs Thanks and regards, Lokesh lokesh wrote, on 03/26/10 11:36: > Dear all, > I was trying to run a simple simulation in cadence Spectre. I got the > following error. Any idea what it could mean?. > /*********************** > *Error* Errors encountered during simulation. The simulator run log > has not been generated. > Possible cause could be an invalid command line option for t...

error in cadence mixed-signal simulation
Hi I am getting an error message "*Error* length: argument must be a list or an array - "("\"Y\" \"A\" \"B\" \"VDD\" \"VSS\" \"VBULK\")" when i run the spectreSverilog simulator for mixed signal design. does anyone have any ideas as to the origin of this error? ... and what i can do to fix it? thanks, mekhail ...

Cadence simulator
Hii, Can anybody plz tell how to find total combinational path delay for a combinational circuit in Cadence verilog simulator?I am using Cadence and Synopsys design analyzer to find a combinational path delay to estimate some clock frequency.I can do it by putting a register block at the front and end of the combinational cloud and then checking maximum operating frequency ,but that delay will include delays due to flipflops of the regs as well as wires.So can I find only the delay between the input and output of a combinational cloud in that simulator? snehashis On Fri, 29 Oct 2004 13:39:40 -0400, "snehashis" <snehashis_iitkgp@yahoo.co.in> wrote: >Hii, > Can anybody plz tell how to find total combinational path delay for a >combinational circuit in Cadence verilog simulator?I am using Cadence and >Synopsys design analyzer to find a combinational path delay to estimate >some clock frequency.I can do it by putting a register block at the front >and end of the combinational cloud and then checking maximum operating >frequency ,but that delay will include delays due to flipflops of the regs >as well as wires.So can I find only the delay between the input and output >of a combinational cloud in that simulator? > snehashis to do delay calculation, the tool you need is a timing analyzer not a simulator. you can use design_an...

Cadence Verilog AMS Simulation 'GCC' Error.
Hello all I am trying to learn how to run verilog AMS simulations in cadence. We have IC5141 and IUS810. I need to learn and give a demo to other students. I found a tutorial which walk you through simulating the Analog Equalizer given in the sample VFS_PHY_180 library provided by cadence. It is based on the Cadence Verilog AMS simulation guide. However I get the following error. I also get the same error running a simple ideal ADC example. I have all systemc folders in path and it shows GCC 3.2.3 and GCC 4.1 install. Do I need to some how install GCC 3.3 inside cadence directory. Please help. Elaborating VFS_AMS_PHY180_sims.aeq_ac_sim:config_ams - ncelab VFS_AMS_PHY180_sims.aeq_ac_sim:config_ams -snapshot aeq_ac_sim:ams1224728805594 -cdslib /home/users/vaibhav/adc_class/cds.lib -propsPath /home/users/vaibhav/adc_class/vfs_amsflow/VFS_AMS_PHY180_sims/ aeq_ac_sim/config_ams/prop.cfg -hdlvar /home/users/vaibhav/adc_class/vfs_amsflow/hdl.var VFS_AMS_PHY180_sims.cds_globals:aeq_ac_sim_config_ams ConnRules_18V_mid -errormax 50 -discipline logic -timescale 1ns/1ns - noparamerr -use5x4vhdl -status -delay_mode None -novitalaccl -update -omicheckinglevel Standard -access +r-w-c - modelpath "/home/users/vaibhav/adc_class/vfs_amsflow/spectre_models/ gpdk.scs(NN)" ncelab: 08.10-s004: (c) Copyright 1995-2008 Cadence Design Systems, Inc. ncelab: *N,SFEDPL: Deploying new SFE in analog engine. ncelab: *F,INTERR: INTERNAL ERROR ---------------------------------------------...

Debugging Analog Errors while simulating VHDLAMS behavioral code using Cadence Spectre
Hi Could you please help me out in debugging the analog Errors while simulating a VHDLAMS transistor level designs. The error from spectre looks like: "Error found by spectre during DC solution estimation, during IC analysis, during transient analysis `amsAnalysis'. Matrix is singular (detected at `tb_output' and `uInv.A1.irn'). ncsim:*E, RNALER: simulation terminated due to analog error" I have no clue how to debug the Problem Thanks in advance. your help is awaited. --Srinivas ...

Debugging Analog Errors while simulating VHDLAMS behavioral code using Cadence Spectre #2
Hi Could you please help me out in debugging the analog Errors while simulating a VHDLAMS transistor level designs. The error from spectre looks like: "Error found by spectre during DC solution estimation, during IC analysis, during transient analysis `amsAnalysis'. Matrix is singular (detected at `tb_output' and `uInv.A1.irn'). ncsim:*E, RNALER: simulation terminated due to analog error" I have no clue how to debug the Problem Thanks in advance. your help is awaited. --Srinivas ...

Automation Studio - Circuit Design and Simulation Software, AUTOMATION STUDIO V5.0 PRO EDITION, CADENCE ORCAD 2004
Automation Studio - Circuit Design and Simulation Software, AUTOMATION STUDIO V5.0 PRO EDITION, CADENCE ORCAD 2004 - 2000, Altium P-CAD V2002, DXP SUITE V2004, WEBSPHERE EVERYPLACE MOBILE PORTAL v5.0 (c) ALTIUM [2 CDs], ModelSim.SE.v6.0, AutoTRAX.EDA.v3.04, Aldec.Riviera.v2004.08.1533.WinNT2kXP, Metrowerks CodeWarrior Development Studio v9.3 and Addon, National Instruments programs 2004, Vision Development Module v7.1, NI-IMAQ for IEEE 1394 V1.5.2 Suite, LabVIEW V7.2 Professional Development System, Diadem 9, Digital Waveform Editor V1, other -------------------------------------------------------- SABER DESIGNER V2003.6 (c) SYNOPSYS CD NR 12 517 SABER DESIGNER V2002.4 (c) AVANT!/SYNOPSYS 11 452 AUTOMATION STUDIO V5.0 PRO EDITION - FAMIC TECH INC CD NR 14 860 ModelSim.SE.v6.0, AutoTRAX.EDA.v3.04, Aldec.Riviera.v2004.08.1533.WinNT2kXP, Metrowerks CodeWarrior Development Studio v9.3 and ADDON, ------------------------------------------------------------------------ P-CAD V2002 (c) Altium CD NR 11 286 DXP SUITE V2004 (c) ALTIUM 15 524 WEBSPHERE EVERYPLACE MOBILE PORTAL v5.0 (c) ALTIUM [2 CDs] 15 600 ------------------------------------------------------------------------ CADENCE SILICON PACKAGE BOARD CODESIGN V15.2 [3 CDs] CD NR 15 836 LOGIC DESIGN AND VERIFICATION V5.1 - CADENCE 14 343 PCB DESIGN STUDIO V15.1 - CAD...

Cadence Spectre Error
Hi all, I am in the middle of a tapeout and suddenly spectre simulator is not running anymore. When I try to open the Analysis window in the Analog Design Environment, it gives me the following error: ************************************************* sevEditSelectedAnas('sevsession1) * Field is "pac_special" * *Error* hiCreateCyclicField: Value must be a string or icon list ERROR ************************************************* The Analysis window simply doesnot show up. From what I could gather fiddling around with ADE, this is specifically a Spectre problem because when I change the simulator to HSPICE and try to set the analyses, the Analysis window pops open. The tapeout date is near. Please help!! Thank you so much. Regards, SP ...

Cadence LVS error
Hi, I am getting an error while running the LVS in Cadence. The error message says: The inv schematic has changed after it was last extracted. si: the netlist did not complete successfully. I had completed a sucessful LVS check on this schematic some time ago. No suddenly I see this error. I have not modified any schematics/ layout/ extracted layout. This error is not limited to onr schematic but all the schematics present in my library. I am not sure how to resolve this issue. Can someone please hyelp me find solution for this problem? Any help is really appreciated. Thank you, Pallavi On Fri, 5 Oct 2007, pallavi wrote: > I am getting an error while running the LVS in Cadence. The error > message says: The inv schematic has changed after it was last > extracted. si: the netlist did not complete successfully. The only times I have seen that, the "solution" is to open the schematic and do a "check and save" on it. Further in your post, you mention that you made no schematic edits, so I have no idea why the schematics would suddenly need to have this done again. Did you by chance replace, or rename a reference library? I would recomend trying to run LVS on a very small simple schematic, and see if the "check and save" works... If it does, then I have no idea what would have caused your entire library to mess up like that. On Oct 5, 11:51 am, The Master <tar...@nospam.sdf.lonestar.org.nospam> wrote: > On Fri, 5...

cadence
Hey, guys! I have two questions: 1) how to convert the cadence technology file .tf to L-Edit tdb file? 2) how to make an array of opening in one layer in Virtuoso? Thanks! For 2) the simplest way is to create a cell that has the "opening in one layer" and then place an array of this cell in your cell. Thanks! I finally also found this way vdvalk@rogers.com wrote: > For 2) the simplest way is to create a cell that has the "opening in > one layer" and then place an array of this cell in your cell. Tanner L-Edit may import a .tf file and save it in .db format. Some features need to be checked manually. ============== Kholdoun TORKI http://cmp.imag.fr ============== Virtuoso wrote: > Hey, guys! I have two questions: > > 1) how to convert the cadence technology > file .tf to L-Edit tdb file? > 2) how to make an array of opening in one layer in Virtuoso? > > Thanks! > ...

Simulating an NMOS in Cadence.
I am trying to use the nmos4 instance which I found in analogLib but I get the following error: 'nmos4' is an undefined primitive device. I tried using the following library file which I created: simulator lang=spectre library nmos section ss model nmosajm nmos4 tnom=27 TOX=4.1E-9 XJ=1E-7 endsection ss endlibrary nmos I also tried using the following model file: ..model nmosajm nmos4 tnom=27 TOX=4.1E-9 XJ=1E-7 I realize I'm missing a ton of parameters but I figure I should get past the 'nmos4' is an undefined primitive device error before I move on...

Restarting a Cadence Simulation
Hi I am using the "check-point" feature within Analog Design Environmen (ADE) to allow me to restart my Spectre transient simulations (whic run for several days) if they stop due to some form of system crash Details of what I do ----------------------- For this I set "create check-point file" unde "set-up->Environment" in ADE. I also mention in th "analysis->choose->transient->options" form the value o "ckptperiod" (i.e. check-point period = 20 ns, say) Cadence then creates a "check point file" even 20 ns of my transien simulation. Hence, if my system crashes at say t = 125 ns, I will b able to restart the simulation from t = 120 ns. To restart from 12 ns I check the box "set-up->environment->start from check-poin file" before restarting the simulation Here is MY PROBLEM: ------------------------ When I view the waveforms after a RE-STARTED simulation completes, DO NOT SEE THE WAVEFORMS for the time before the crash. For example if my simulation crashed (or was stopped) at 125 ns, and Cadenc starts the RE-STARTED simulation from t = 120 ns, I do NOT se waveform data for 0-120 ns. However, I see waveform data for al signals from t=120 ns! How do I fix this I have tried playing with both "session->save-state" an "results->save" in ADE, but to no use. Any help will be greatl appreciated Thanks Si On Sat, 16 Apr 2005 04:35:16 -0500, sid.dev@gmail-dot-com.no-...

Error while running cadence!
Dear all, I had very little idea about the setup and configuration of cadence in Linux. I was successfully running cadence using "./ace51" command. But, today I got an error which says: ---------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------- ../ace51: line 694: /setup/GetENV: No such file or directory Hercules path : /bin/ **ACE51 Install Error** No ace50 generic release in --> /software/designPackages/designPackages/cmos9/current/tools/ace/ public/generic_50.lnx/release --------------------------------------------------------------------------- ** Please contact Support Hotline (408) 721-5122 for ACE51 Install Error ** - ACE Environment Group ---------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------- Do anybody have any idea why it is throwing error. Certainly there are some alteration in the configuration, because previously it was running fine; but I am unable to catch the loophole. Please help me out. Regards Samiran On May 26, 7:37=A0am, Samiran <samiran....@gmail.com> wrote: > Dear all, > > I had very little ...

Optimization simulation in the Cadence
Dear all, Could Spectre simulator provide the optimization simulation function? such as working in the ADS. Best Regards, Charles CHENG There is an optimizer in the Analog Design Environment, although it isn't exactly the most powerful optimizer. There are better optimizers in the Aptivia and NeoCircuit products. Regards, Andrew. On Thu, 6 May 2004 15:03:15 +0800, "smartchi" <s014118@mailserv.cuhk.edu.hk> wrote: >Dear all, > > Could Spectre simulator provide the optimization simulation function? >such as working in the ADS. > >Best Regards, > >Charles CHENG > -- Andrew Beckett Senior Technical Leader Custom IC Solutions Cadence Design Systems Ltd Dear Andrew, How could I check that I have these softwares or not? Moreover, how could I open it? Best Regards, Charles "Andrew Beckett" <andrewb@DELETETHISBITcadence.com> ??? news:qd5l90hf84pps5fonmp2hrg03imi0tre50@4ax.com ???... > There is an optimizer in the Analog Design Environment, although it > isn't exactly the most powerful optimizer. > > There are better optimizers in the Aptivia and NeoCircuit products. > > Regards, > > Andrew. > > On Thu, 6 May 2004 15:03:15 +0800, "smartchi" <s014118@mailserv.cuhk.edu.hk> > wrote: > > >Dear all, > > > > Could Spectre simulator provide the optimization simulation function? > >such as working in the ADS. > > >...

Solve the DRC error in Cadence???
Hi, I already solved all the DRC errors in my design. But the method to solve the following problem seems stupid. > \o 1 Label/Pin "A" is causing two nets to > have the same name. > \o 1 Label/Pin "D" is causing two nets to > have the same name. > \o 3 Label/Pin "Q" is causing two nets to > have the same name. > \o 5 Label/Pin "gnd!" is causing two nets > to have the same name. > \o 13 Label/Pin is on a net with a different > name The reason for these problems is, I use standard cells and every standard cell has the same the input pin name and output pin name. In my design I don't want to connect them each other. I delete them one by one. Is there any better way to delete them? Thanks, Adrian Pins are only collected from the top level cell. Diva does not go down into the hierarchy looking for pins. Did you flatten the standard cells? If you did, you should not have told the flatten command to include the pins. All you can do is remove the pins by hand since Diva has to believe you wanted them there if you put them there. Use the search form. I think it is in the Edit menu. On 5 Aug 2004 15:15:28 -0700, yxl4444@louisiana.edu (Lee) wrote: >Hi, > >I already solved all the DRC errors in my design. But the method to >solve the following problem seems stupid. > >> \o 1 Label/Pin "A" is causing two nets to &...

Cadence simulation-log problems
Hello, our company is on the way to replace the running Unix systems with faster Linux computers. But now, during the Simulation Process, the following problem arise: The pop-up window, which contain all importent informations of the simulation process, leave empty. Only after reopen the runlog window (Analog Design Environment -> Netlist and Run), the informations are visible. Now i hope, you can try to help me solve this little nasty problem. Is it possible, that speed problems during deleting/creating old and new logfiles are the reason? with kind regards Stefan -- Hi, unsere Firma ist grade dabei von Unix Rechnern auf Linux Systeme zu wechseln.Dabei tritt waerend der Simulation folgender Fehler auf: Die Batch-Ausgabe der Simulation funktioniert nicht fehlerfrei.Auf den Unix rechnern erscheint nach start der Simulation ein Pop-Up Window mit der Ausgabe aller relevanten Daten. Auf den Linux-Maschinen startet die Simulation auch, jedoch bleibt das Pop-Up Window leer. Erst nach schliessen und dann erneutem oeffnen kann man den Simulationsfortschritt sehen. Liegt dieser Fehler nun einfach nur am Betriebssystem oder hat das andere Gruende? Zum Beispiel Geschwindigkeitsprobleme, user-Privilegien oder der Linux-Interpretation von System-Befehlen. Mfg. Stefan -- Hi again, we have solve the problem by integrating a sleep function behind the logfile creating. Now the output of the results run on both types of computers (linux + unix) without problems. ...

ERROR cadence comand not found
Hi All, I have a problem with the installation of the XFAB Design Kit. I I configured the environment variables and could make the Virtuoso work, but when I try to run tkit appears the following error message: ERROR Cadence executable not found! perhaps it is a mistake in. bashrc. Here it is: export T_DIR=/root/GAMA/Projetos/Desig_kit export CADENCE=/root/cadence/installs export CDS_ROOT=$CADENCE/IC610 export MMSIM=$CADENCE/MMSIM101 export ASSURAHOME=$CADENCE/ASSURA41 export CDSHOME=$CDS_ROOT export CDSDIR=$CDSHOME export CDS_INSTALL_DIR=$CDS_ROOT/tools/dfII/bin export OA_HOME=$CADENCE/IC610/share/oa export PATH=$CDS_INSTALL_D/bin:$PATH export PATH=$MMSIM/tools/bin:$MMSIM/tools/spectre/bin:$CDS_ROOT/tools/bin:$CDS_INTALL_DIR/bin$CDS_ROOT/tools/spectre/bin:$CDS_ROOT/tools/plot/bin:$PATH export SUBSTRATESTRMHOME=$ASSURAHOME export PATH=$T_DIR/cadence/env/bin:$PATH export PATH=$PATH:$ASSURAHOME/bin:$ASSURAHOME/tools/bin:$ASSURAHOME/tools/assura/bin Thanking you, Yours sincerely, Dionatas...

Cadence CAD tools on OpenSolaris
Hello, I am trying to install Cadence IC610 (IC-614 06.14.506 Solaris 10) suite on OpenSolaris 2009.6 version. It seems that all the installation and configuration process using Installscape are finished without problem, but I encounter an error message like the following when I try to launch virtuoso design environment. virtuoso: ERROR: The command /tools/cadence/IC610/share/oa/bin/ sysname returned an error status: unknown virtuoso: INFO: Note that OpenAccess (OA) requires running the Configure phase. virtuoso: See the "OpenAccess Installation and Configuration Guide" before virtuoso: you complete the configuration step. This manual is included with virtuoso: the Cadence product documentation. [1] Exit 1 virtuoso First of all, can I run IC610 on OpenSolaris machine? Is IC610 Solaris10 (x86) version compatible with OpenSolaris? I tried this way since OpenSolaris is mostly compatible with Solaris 10, so I wanted to give it a shot. If they are compatible, does anyone have any suggestion to solve this error? Thank you in advance. Bluebook wrote, on 08/12/10 00:40: > Hello, > > I am trying to install Cadence IC610 (IC-614 06.14.506 Solaris 10) > suite on OpenSolaris 2009.6 version. > > It seems that all the installation and configuration process using > Installscape are finished without problem, > but I encounter an error message like the following when...

Simulating Coaxial cables in cadence
Can anyone help me with adding a coaxial cable in cadence schematic? As in, I have the properties such as radius of inner and outer conductors, permeability, dielectric constant, etc. The same is possible in ADS. I want to find out how to simulate the same in CADENCE. Thanks for the help. -Sarath ...

How to simulate Oscilaltors in Cadence spectre
Dear Sir I have designed a RC phase shift oscillator in cadence . But i couldn't know how to simulate it using cadence spectre. Using the same spectre i have successfully simulated the ring oscillator(setting the initial condition to 0). I followed the same procedure for this new oscillator, but i couldn't. Can anyone please guide me on this.... I tried over net, couldnt find any useful information. Thank you vinai thrivik wrote, on 12/14/11 10:59: > Dear Sir > > I have designed a RC phase shift oscillator in cadence . But i > couldn't know how to simulate it using cadence spectre. > Using the same spectre i have successfully simulated the ring > oscillator(setting the initial condition to 0). I followed the same > procedure for this new oscillator, but i couldn't. > Can anyone please guide me on this.... > I tried over net, couldnt find any useful information. > > Thank you You didn't give much information. What have you tried, and what didn't work? Regards, Andrew. ...

Cadence Simulations using file
hi, does anyone know or has a script i can run to input simulation data using file and get the output in a file without any user interface so i can have matlab feeding the data into cadence and reading the data out. Regards Meysam On Thu, 14 Jun 2007 18:23:35 -0000, "unforgiven@gmail.com" <unforgiven@gmail.com> wrote: >hi, > does anyone know or has a script i can run to input simulation data >using file and get the output in a file without any user interface so >i can have matlab feeding the data into cadence and reading the data >out. >Regards >Meysam Your question is too vague and open ended. You didn't say what simulator you're using, and you didn't say what you're really trying to do. So I'm going to guess what you're actually asking, and give my answer based on my wild guess... You can run spectre from the command line, and you can use pwl sources (see "spectre -h vsource") to read from files to generate signals based on time-value pairs. You can output in various ASCII formats (e.g. psfascii, nutascii in some cases) by using the -f option to spectre (see "spectre -h"). Or you can use OCEAN to write out data in ASCII formats. Also, in MMSIM61 and later, there's a spectre toolbox for matlab so you can directly read psf data in matlab. Regards, Andrew. -- Andrew Beckett Senior Solution Architect Cadence Design Systems, UK. ...

Problem with Cadence AMS simulator
Hello everyone, I am in the process of setting up the Cadence-AMS 2.0 environment for Verilog-AMS and am facing problems with the cds.lib and hdl.var files. On debugging the cds.lib file using the 'nchelp -cds.lib' command, I am getting the following error: ra.ececs.uc.edu ~/verilog11-9> nchelp -cdslib nchelp: v03.35.(s016): (c) Copyright 1995 - 2002 Cadence Design Systems, Inc. Parsing -CDSLIB file ./cds.lib. nchelp: *W,VHCLAF: CDS.LIB (fatal): Syntax error 'DEFINE NCSIMRC ( ../ncsimrc, ~/.ncsimrc )' on line 4 of /opt/CAD/Cadence/AMS-2.0/tools.sun4v/inca/files/hdl.var. nchelp: *W,VHCLAF: CDS.LIB (fatal): Syntax error 'DEFINE VHDL_SUFFIX ( .vhd, .vhdl )' on line 5 of /opt/CAD/Cadence/AMS-2.0/tools.sun4v/inca/files/hdlvhdl.var. nchelp: *W,VHCLAF: CDS.LIB (fatal): Syntax error 'DEFINE VERILOG_SUFFIX ( .v )' on line 5 of /opt/CAD/Cadence/AMS-2.0/tools.sun4v/inca/files/hdlvlog.var. cds.lib files: 1: ./cds.lib 2: /opt/CAD/Cadence/AMS-2.0/tools.sun4v/inca/files/cds.lib included on line 2 of ./cds.lib 3: /opt/CAD/Cadence/AMS-2.0/tools.sun4v/inca/files/cdsvhdl.lib included on line 2 of /opt/CAD/Cadence/AMS-2.0/tools.sun4v/inca/files/cds.lib 4: /opt/CAD/Cadence/AMS-2.0/tools.sun4v/inca/files/cdsvlog.lib included on line 3 of /opt/CAD/Cadence/AMS-2.0/tools.sun4v/inca/files/cds.lib 5: /opt/CAD/Cadence/AMS-2.0/tools.sun4v/inca/files/hdl.var included on line 3 of ./cds.lib 6: /opt/CAD/Cadence/AMS-2.0/tools.su...

Help. Cadence Spectre Simulation
Hello, Just met a strange problem while running Spectre simulation. I was trying to change the instance parameter (resistance value) and see the change of waveform. After I changed the parameter and rerun the simulation (third/forth try), the waveform shows the previous simulation result. I need to exit ICFB , then restart it to run the simulation in order to get the correct waveform. Any suggestion? Thanks! iFresh On Jun 26, 10:23 am, qjin.resear...@gmail.com wrote: > the change of waveform. After I changed the parameter and rerun the > simulation (third/forth try), the waveform shows the previous > simulation result. I've had this happen. Try Simulation->Stop instead of a full quit/ restart, and see if that helps. -Jay- <jayl-news@accelerant.net> wrote in message news:1182889343.620490.129830@g37g2000prf.googlegroups.com... > On Jun 26, 10:23 am, qjin.resear...@gmail.com wrote: > > the change of waveform. After I changed the parameter and rerun the > > simulation (third/forth try), the waveform shows the previous > > simulation result. > > I've had this happen. Try Simulation->Stop instead of a full quit/ > restart, > and see if that helps. > > -Jay- > > I guess you need to do the re-"netlist and run" instead of re-"run" because you have modified your resistor parameter. Cheers. On 27 Jun., 12:14, "fredo" <f...@hotmail.com> wrote: > <...

Help on IP3 simulation in cadence
Hi, Normally I can get IP3 from PSS or PSS/PAC simulation in IC4.46, QPSS or QPSS/QPAC simulation in IC5.0. When I designed LNA before I can easily get a clear 3:1 slope. But when I use cadence to run the IP3 simulation over one single device, I can not get the same 3:1 slope no matter how I changed the tolerance parameters. I did not use matching network in my simulation as in LNA design, only for the device itself. Anybody met the similar problem before on IP3 simulation? Any suggestions? Thanks! David ...

Web resources about - error in cadence simulation - comp.cad.cadence

Simulation - Wikipedia, the free encyclopedia
... or behaviors/ functions of the selected physical or abstract system or process. The model represents the system itself, whereas the simulation ...

Simulation - Wikipedia, the free encyclopedia
... or behaviors/ functions of the selected physical or abstract system or process. The model represents the system itself, whereas the simulation ...

Simulation - Wikipedia, the free encyclopedia
... or behaviors/ functions of the selected physical or abstract system or process. The model represents the system itself, whereas the simulation ...

Simulation - Wikipedia, the free encyclopedia
... or behaviors/ functions of the selected physical or abstract system or process. The model represents the system itself, whereas the simulation ...

Glu Launches Kendall & Kylie Lifestyle Simulation Game on Mobile
... the release of Kendall & Kylie, its latest celebrity mobile game on iOS and Android. Starring Kendall and Kylie Jenner , the lifestyle simulation ...

Computer simulation fills in the blanks of Neanderthal extinction
Even tiny groups of humans would have had the tech to out-compete Neanderthals.

Shooting Simulations: What Do They Tell Us
Earlier, Anne Laurie posted about the recently staged, weapons free, mass shooting simulation/demonstration at the University of Texas. In that ...

Predicting All 5 Christmas Day Games Using 'NBA 2K' Simulations - Bleacher Report
Christmas Day is one of the most exciting days of the year on the NBA calendar, and this year is no different, with the Miami Heat playing the ...

'95-96 Bulls vs. '15-16 Warriors: New age tops old school in 2K simulation
We let the '96 Bulls and '15 Warriors handle their business on the virtual hardwood to see which one is better.

Simulation of a Leg Gushing Blood Is as Gross as You'd Expect
If you’ve watched any modern action movies, you’ve probably got a pretty good mental picture of what happens when a person hemorrhages blood. ...

Resources last updated: 3/24/2016 9:44:06 AM