f



Trouble optimizing tacker drive in DOS

I tried to optimize a ZIP100 disk that was compressed in DOS mode on Win98 =
created for the purpose of networking a DOS laptop to it to act as an extra=
 simulated hard drive--it uses a ZIP100 disk as a first hard drive, but it'=
s not enough--using Stacker and ran into a problem: first, the program retu=
rned a Drive Not a Stacker Drive; then, after some messing around, eventual=
ly got to the optimizing the screen, only for it to lock up after reading t=
he drive a little.  The following are my config. files:=20
--------------------------------=20
CONFIG.SYS:=20
--------------------------------=20

DOS=3DHIGH,UMB=20
Device=3DC:\WINDOWS\Himem.Sys=20
device=3DC:\WINDOWS\emm386.exe RAM=20
devicehigh=3Dc:\dos\furd19_i\xmsdsk.exe 110000=20
rem devicehigh=3Dc:\dos\furd19_i\xmsdsk.exe 110000=20
DEVICEHIGH=3DC:\STACKER4\STACKER.COM=20
DEVICEHIGH=3DC:\STACKER4\sswap.com=20
DEVICEHIGH=3DC:\STACKER4\Screate.sys d: /s=3D70 /c=3D4=20
rem DEVICEHIGH=3DC:\STACKER4\redirect.com=20
devicehigh=3DC:\WINDOWS\command\ebd\oakcdrom.sys /D:mscd001=20
---------------------------------=20
AUTOEXEC.BAT:=20
---------------------------------=20

@echo off=20
SET TMP=3DC:\WINDOWS\TEMP=20
SET TEMP=3DC:\WINDOWS\TEMP=20
SET PROMPT=3D$p$g=20
SET winbootdir=3DC:\WINDOWS=20
SET PATH=3DC:\WINDOWS;C:\WINDOWS\COMMAND;c:\dosnet;c:\network;c:\stacker4;c=
:\network\rar=20

rem create d: /c:4=20
stacker d:=20

lh MSCDEX.EXE /D:mscd001 /l:f=20
lh c:\guest95\guest h:=20

lh doskey /insert=20
------------------------------=20
STACKER.INI:=20
------------------------------=20
/DIR=3DC:\STACKER4\=20
/auto=20

d:=20
g:=20
/P=3D10=20
/RP=3D2=20
----------------------------=20
BTW, I'm also using DriveSpace, but it doesn't have the command-line suppor=
t I need.=20

BTW, this is from a .PIF file I run whenever I activate the network.=20
0
Harry
10/13/2016 9:27:31 AM
comp.compression 4696 articles. 0 followers. Post Follow

0 Replies
102 Views

Similar Articles

[PageSpeed] 0

Reply: