f



Re: Restore Informix software & Database to another server

KW Foo wrote:
> We are trying to backup the server which includes the Informix 7.31
> application and the data and restore to another server.
> 
> We are running the Informix in SUN Solaris 2.6, backup the server using
> "ufsdump" to the tape drive and restore using the "ufsrestore" to another
> server (with the same directory structure and hardware).
> 
> We use "ufsdump" to backup the informix software and also all the Informix
> chunk directories after we shutdown the Informix using "onmode -ky".
> 
> We also did an "ontape" level 0 backup to a tape.
> 
> After we restore the application and the Informix chunk directory, when we
> try to start the Informix engine using "oninit", the server go into "FAST
> RECOVERY" mode, after few minutes, it display message "oninit: Fatal error
> in shared memory initialization".
> 
> 
> The following are the message recorded in the online.log:
> 
> 13:41:32  Informix Dynamic Server Initialized -- Shared Memory Initialized.
> 13:41:32  Physical Recovery Started.
> 13:45:16  Physical Recovery Complete: 84946 Pages Restored.
> 13:45:16  Logical Recovery Started.
> 13:45:16  shmget: [ENOMEM][12]: key 52564806: out of shared memory, check
> system
>  max shared memory segment size
> 13:45:16  out of virtual shared memory

more available shared memory, but the engine want's to allocate more ...

Have you checked and adapted /etc/system, regarding shared memory and 
semaphore parameters??

Look at the release notes...

> 
> 13:45:16  Cannot Rollforward from Checkpoint.
> 13:45:17  Informix Dynamic Server Stopped.
> 13:45:18  mt_shm_remove: WARNING: may not have removed all/correct segments

check with ipcs if there are shared memory segements with owner / group 
informix.

If yes, remove them with ipcrm -s (semaphores) / ipcrm -m (memory)

> 
> After that, we check the "onstat -", and receive message "shared memory not
> initialized for INFORMIXSERVER 'informix'".

How could the onstat program run if the engine is not up and running ??

> 
> Is this the way to do it and how can I get the Informix engine up to restore
> from the "ontape" backup ?
> 

Do a cold restore, normally no problem at all..

> Regards,
> KW Foo
> 
> 

Johann

-- 
******************************************************
Tele Atlas Deutschland GmbH
Dept: ICT-DEU

Am Neuen Horizont 1
D-31177 Harsum

Tel: +49 5127 408-465
Fax: +49 5127 408-559

E-mail: Johann.Eggers@teleatlas.com
******************************************************

sending to informix-list
0
Johann
1/19/2004 10:25:47 AM
comp.databases.informix 16083 articles. 0 followers. Post Follow

0 Replies
724 Views

Similar Articles

[PageSpeed] 56

Reply:

Similar Artilces:

RE: Restore Informix software & Database to another server #4
In my personal opinion, why bother using ufsdump when you could restore with ontape. Don't forget that all chunk structures must be the same but that ontape & ufsdump might not read & write the same way, thus creating incompatibilities. There is gain in using ufsdump versus the potential problems just like the one you encountered. Andr� >From: St�phane Gadoury <stephane.gadoury@transat.com> >To: <informix-list@iiug.org> >Subject: RE: Restore Informix software & Database to another server >Date: Mon, 19 Jan 2004 09:54:50 -0500 > >Make sure you don't have any informix process still running..and grabbing >memory > >Verify with ipcs -m > >Also, verify your $ONCONFIG, so that you SHMBASE goes with the release >notes >( if should not impact, but you never know) > >If that still does not work, try reducing the SHMVIRTSIZE > >-----Message d'origine----- >De : owner-informix-list@iiug.org >[mailto:owner-informix-list@iiug.org]De la part de Paul Watson >Envoy� : 19 janvier, 2004 06:18 >� : informix-list@iiug.org >Objet : Re: Restore Informix software & Database to another server > > >Check the release note in $INFORMIXDIR/release/*/*/ or look in the >/etc/system on the working server > >KW Foo wrote: > > > > What should I check in the /etc/system ? > > > > Regards, > > KW Foo > ...

RE: Restore Informix software & Database to another server #3
Did You re-install Informix executables ('installserver' script) after transferring it to anather machine with Solaris utility? If not, please, do that. Also, do nor forget about 'RUNASROOT' script. ------------------------------------------ Alexey Sonkin Senior Database Administrator > -----Original Message----- > From: KW Foo [mailto:hovid@streamyx.com] > Sent: Monday, January 19, 2004 5:38 AM > To: informix-list@iiug.org > Subject: Re: Restore Informix software & Database to another server > > What should I check in the /etc/system ? > > Regards, > KW Foo > > -- > "Paul Watson" <paul@oninit.com> wrote in message > news:400B9841.75DB2436@oninit.com... > > Have you checked that the /etc/system on the second server is correct > > > > KW Foo wrote: > > > > > > We are trying to backup the server which includes the Informix 7.31 > > > application and the data and restore to another server. > > > > > > We are running the Informix in SUN Solaris 2.6, backup the server > using > > > "ufsdump" to the tape drive and restore using the "ufsrestore" to > another > > > server (with the same directory structure and hardware). > > > > > > We use "ufsdump" to backup the informix software and also all the > Informix > > > ch...

RE: Restore Informix software & Database to another server #2
Make sure you don't have any informix process still running..and grabbing memory Verify with ipcs -m Also, verify your $ONCONFIG, so that you SHMBASE goes with the release notes ( if should not impact, but you never know) If that still does not work, try reducing the SHMVIRTSIZE -----Message d'origine----- De : owner-informix-list@iiug.org [mailto:owner-informix-list@iiug.org]De la part de Paul Watson Envoy� : 19 janvier, 2004 06:18 � : informix-list@iiug.org Objet : Re: Restore Informix software & Database to another server Check the release note in $INFORMIXDIR/release/*/*/ or look in the /etc/system on the working server KW Foo wrote: > > What should I check in the /etc/system ? > > Regards, > KW Foo > > -- > "Paul Watson" <paul@oninit.com> wrote in message > news:400B9841.75DB2436@oninit.com... > > Have you checked that the /etc/system on the second server is correct > > > > KW Foo wrote: > > > > > > We are trying to backup the server which includes the Informix 7.31 > > > application and the data and restore to another server. > > > > > > We are running the Informix in SUN Solaris 2.6, backup the server using > > > "ufsdump" to the tape drive and restore using the "ufsrestore" to > another > > > server (with the same directory structure and hardware). > > &g...

Restore Informix software & Database to another server
We are trying to backup the server which includes the Informix 7.31 application and the data and restore to another server. We are running the Informix in SUN Solaris 2.6, backup the server using "ufsdump" to the tape drive and restore using the "ufsrestore" to another server (with the same directory structure and hardware). We use "ufsdump" to backup the informix software and also all the Informix chunk directories after we shutdown the Informix using "onmode -ky". We also did an "ontape" level 0 backup to a tape. After we restore the application and the Informix chunk directory, when we try to start the Informix engine using "oninit", the server go into "FAST RECOVERY" mode, after few minutes, it display message "oninit: Fatal error in shared memory initialization". The following are the message recorded in the online.log: 13:41:32 Informix Dynamic Server Initialized -- Shared Memory Initialized. 13:41:32 Physical Recovery Started. 13:45:16 Physical Recovery Complete: 84946 Pages Restored. 13:45:16 Logical Recovery Started. 13:45:16 shmget: [ENOMEM][12]: key 52564806: out of shared memory, check system max shared memory segment size 13:45:16 out of virtual shared memory 13:45:16 Cannot Rollforward from Checkpoint. 13:45:17 Informix Dynamic Server Stopped. 13:45:18 mt_shm_remove: WARNING: may not have removed all/correct segments After that, we ...

FW: Restore Informix software & Database to another server
Yes, the kernel settings must be correct - and also, did you create the symbolic links in /usr/lib for Informix ? -----Original Message----- From: owner-informix-list@iiug.org [mailto:owner-informix-list@iiug.org] On Behalf Of Paul Watson Sent: Monday, January 19, 2004 10:42 AM To: informix-list@iiug.org Subject: Re: Restore Informix software & Database to another server Have you checked that the /etc/system on the second server is correct KW Foo wrote: > > We are trying to backup the server which includes the Informix 7.31 > application and the data and restore to another server. > > We are running the Informix in SUN Solaris 2.6, backup the server using > "ufsdump" to the tape drive and restore using the "ufsrestore" to another > server (with the same directory structure and hardware). > > We use "ufsdump" to backup the informix software and also all the Informix > chunk directories after we shutdown the Informix using "onmode -ky". > > We also did an "ontape" level 0 backup to a tape. > > After we restore the application and the Informix chunk directory, when we > try to start the Informix engine using "oninit", the server go into "FAST > RECOVERY" mode, after few minutes, it display message "oninit: Fatal error > in shared memory initialization". &...

How to copy a sun-database in one informix database to another informix database?
Hi, Sorry I am not an informix dba, and I was faced to copy a sub-database(sorry I don't know the clear name of such concept, as informix is like sql-server, which used multiple database) from one informix database system to another informix database. I know in oracle, we can use transportable tablespace, copy the datafile and transport the metadata, and do something else. How can I do it in informix then? Is there document which talk about the detail step? Thanks It would really help if you knew the versions of the Informix databases. Assuming Informix IDS 7.x or IDS 9.x If the two systems are binary compatible the fastest method is to use onunload/onload. If the systems are not binary compatible the easiest way is to use dbexport/dbimport. Everything is well documented in the manual "IBM Informix Migration Guide". This manual covers all Informix databases from Standard Engine and Online to IDS and XPS. See http://www.ibm.com/informix/pubs zhu chao wrote: > Hi, > Sorry I am not an informix dba, and I was faced to copy a > sub-database(sorry I don't know the clear name of such concept, as > informix is like sql-server, which used multiple database) from one > informix database system to another informix database. > I know in oracle, we can use transportable tablespace, copy the > datafile and transport the metadata, and do something else. How can I > do it in informix then? Is there...

Re: database restore with ontape -r on Informix Online Dynamic Server
Neil Truby wrote: > "Carmen Constantinescu" <carmen@wylog.com> wrote in message > news:bthi4v$ujm$1@terabinaries.xmission.com... > >>Please help! >> >>I try to restore a database with ontape -r file_name like : >> $INFORMIXDIR/bin/ontape -r <<file_name >> >> y >> n >> n >> n >> file_name >> >>The error that I get is if the server is offline is :" Physical restore >>failed - function read archive backup failed code 1 errno 2". > > > What are expecting << file_name to do? In this example it is the end of file marker. However, I would check those responses. Better to run this command manually and supply the answers yourself. I thought the first question was about salvaging the existing logs. Cheers, -- Mark. +----------------------------------------------------------+-----------+ | Mark D. Stock mailto:mdstock@MydasSolutions.com |//////// /| | Mydas Solutions Ltd http://MydasSolutions.com |///// / //| | +-----------------------------------+//// / ///| | |We value your comments, which have |/// / ////| | |been recorded and automatically |// / /////| | |emailed back to us for our records.|/ ////////| +--------------------...

Re: database restore with ontape -r on Informix Online Dynamic Server #2
Paul Watson wrote: > something like > > onstat -r <<EOF > y > n > n > n > EOF > > should work, but I wouldn't use it on a production system Which is exactly the same as the example given, except for the obvious command error and the missing initial <CR> to the enter tape and press RETURN prompt. However, I am not convinced of the order of the answers, and I don't have ontape to hand to test..., on dev or prod. So I agree, simply run ontape -r and answer the prompts manually. Cheers, -- Mark. +----------------------------------------------------------+-----------+ | Mark D. Stock mailto:mdstock@MydasSolutions.com |//////// /| | Mydas Solutions Ltd http://MydasSolutions.com |///// / //| | +-----------------------------------+//// / ///| | |We value your comments, which have |/// / ////| | |been recorded and automatically |// / /////| | |emailed back to us for our records.|/ ////////| +----------------------+-----------------------------------+-----------+ sending to informix-list ...

Re: database restore with ontape -r on Informix Online Dynamic Server #3
David Williams wrote: > "Colin Bull" <c.bull@videonetworks.com> wrote in message news:btmcr4> That > will make it a lot tidier, should be able to use a case statement. > >>I will revise next week sometime. >> > > > http://www.smooth1.demon.co.uk/ifaq06.htm#6.33 > > 6.33 What status codes does onstat return? > On 21st May 1998 mdstock@informix.com (Mark D. Stock) wrote:- > > As a point of interest, you can check the current mode of IDS by checking > the status ($?) after onstat -. > > The values returned by 'onstat -' are: > > a.. -1 Offline > b.. 0 Initialisation > c.. 1 Quiescent > d.. 2 Recovery > e.. 3 Backup > f.. 4 Shutdown > g.. 5 Online > h.. 6 Abort Wow! You remembered! Perhaps I should add some: Return codes IDS 7 & 9 -1 Off-line (-1 = 255) 0 Initialisation 1 Quiescent 2 Recovery 3 Backup 4 Shutdown 5 On-line 6 Abort IDS 8 -1 Off-line (-1 = 255) 0 Initialisation 1 Quiescent 2 Micro kernel 3 Recovery 4 Backup 5 Shutdown 6 On-line 7 Abort Cheers, -- Mark. +----------------------------------------------------------+-----------+ | Mark D. Stock mailto:mdstock@MydasSolutions.com |//////// /| | Mydas Solutions Ltd http://MydasSolutions.com |///// / //| | +-----------------------------------+//// / ///| | |We ...

RE: database restore with ontape -r on Informix Online Dynamic Server 7.31 on Linux
David Williams wrote > > "Andy Kent" <andykent.bristol@virgin.net> wrote in message > news:a3525a11.0401080308.64a1ed12@posting.google.com... > > Why ever would you want to run a cold restore unattended? > > > > Great laxative ... > > > > To create a reporting database once per week... > > Once all the ontape stuff is finished don't forget to > > a) Sit in a loop running onstat - and check the return > code each time.Wait for the server to reach quiescent > mode. This can take 45 mins. > > b) onmode -m to move to Online mode. > > Otherwise a reboot means another restore! > > I had this working great for a customer a while back! Here is one I prepared earlier --- onbar/ontape whatever .. FORCEOL=n until onstat - | grep "On-Line" > /dev/null do echo "Off line" # ; sleep 20 onstat - | grep "[BQ][lu][oi][ce][ks]" > /dev/null && ( echo "\nServ blokd" if [ x$FORCEOL = "xn" ] ; then echo "Onlining.." ; onmode -m ; FORCEOL=y; sleep 240 else echo "waiting to online " ; sleep 240 fi ) onstat - # for comfort factor sleep 60 done This seems to work on our automated restore of live for testing. I know the grep line looks like a load of boll*cks. But it works. Tru64 5.1 and ...

Re: database restore with ontape -r on Informix Online Dynamic Server 7.31 on Linux #3
Thanks a lot ! My problem was the fact that I tried to restore on a Linux machine a backup made on a UNIX machine. The INFORMIX server version was the same. The problem was the OS, in fact. Backup with ontape is recommended only when the restore is made on the same machine. Carmen ----- Original Message ----- From: "S.Dhayanidhi" <sdhaya@hotmail.com> To: <informix-list@iiug.org> Sent: Monday, January 12, 2004 6:35 AM Subject: Re: database restore with ontape -r on Informix Online Dynamic Server 7.31 on Linux > Here is my cute little code.. for unattended tape restore. > We do restore to our development everyday and it works fine. > > > # ------------------------------------------------------------------ > echo " ********************************************" > echo " * Tape Restore Utility (For Single Tape ) *" > echo " ********************************************" > # ------------------------------------------------------------------ > echo " " > echo " Press Enter to Continue or CTRL-C to Abort \c" > read con > echo "Please wait Shutting Down Engine..." > echo "y\ny\n" | onmode -k > echo "\nPlease wait Restoring..." > echo "\ny\nn\nn\nn\n" | ontape -r > while true > do > engstatus=`onstat - | awk '{ print $5 } &...

RE: database restore with ontape -r on Informix Online Dynamic Server 7.31 on Linux #2
Christian Knappke wrote > > "Colin Bull" <c.bull@videonetworks.com> wrote: > > > Here is one I prepared earlier --- > > > > onbar/ontape whatever .. > > FORCEOL=n > > until onstat - | grep "On-Line" > /dev/null > > do > > echo "Off line" # ; sleep 20 > > onstat - | grep "[BQ][lu][oi][ce][ks]" > /dev/null && ( echo > > "\nServ blokd" > > if [ x$FORCEOL = "xn" ] ; then > > echo "Onlining.." ; onmode -m ; FORCEOL=y; > > sleep 240 > > else > > echo "waiting to online " ; sleep 240 > > fi > > ) > > onstat - # for comfort factor > > sleep 60 > > done > 'onstat -' sets the return code according to the server state -> > no need for boll*cking greps... > > >From the top of my head: > 255 = server is offline ("Shared memory not initialized...") > 5 = online > 4 = some error > 0..3 = several other states like quiescent, blocked etc. (don't > know exacly) > That will make it a lot tidier, should be able to use a case statement. I will revise next week sometime. Colin Bull c.bull@videonetworks.com sending to informix-list "Colin Bull" &...

DataBase DataBase DataBase DataBase
DataBase DataBase DataBase DataBase Porfessional Programmable Database Ver. 2.0 2.1 Million Record Capacity. Search Rate: 2000/Records/Second. DataBase Type: Random Access. Can Create Unlimited Databases. Programmable fields for any Application. Build Time One Second, (Auto Creates DB). Setup Time: Instantly, Just Enter DB Name. Ultra Easy to Learn (Typically 30 Seconds) Ultra Cheap Price, Special $20, Paypal Accepted. Application Mailed Instantly (file Attached Email). Easy Paypal Online Ordering. See Site Below. http://www.vehiclerepair.org/dbPro/dbpro.html ...

DataBase DataBase DataBase DataBase
DataBase DataBase DataBase DataBase Porfessional Programmable Database Ver. 2.0 2.1 Million Record Capacity. Search Rate: 2000/Records/Second. DataBase Type: Random Access. Can Create Unlimited Databases. Programmable fields for any Application. Build Time One Second, (Auto Creates DB). Setup Time: Instantly, Just Enter DB Name. Ultra Easy to Learn (Typically 30 Seconds) Ultra Cheap Price, Special $20, Paypal Accepted. Application Mailed Instantly (file Attached Email). Easy Paypal Online Ordering. See Site Below. http://www.vehiclerepair.org/dbPro/dbpro.html Scott: #DataBase...

Database Database Database Database Software Cheap
Database Database Database Database Software Cheap Great Datase Software See Website Below. Ultra Easy to Learn (Typically 30 Seconds) Professional Programmable Database Ver. 2.3 2.1 Million Record Capacity, (New cond). Search Rate: 2000 / Records / Second. DataBase Type: Random Access. Can Create Unlimited Databases. Programmable fields for any Application. Has Six Seperate Field Sets All Programmable. Build Time One Second, (Auto Creates DB). Setup Time: Instantly, Just Enter DB Name. Ultra Cheap Price, Special $20, Paypal Accepted. Application Mailed Instantly (file Attached Em...

Database Database Database Database Software Cheap
Database Database Database Database Software Cheap Great Datase Software See Website Below. Ultra Easy to Learn (Typically 30 Seconds) Professional Programmable Database Ver. 2.3 2.1 Million Record Capacity, (New cond). Search Rate: 2000 / Records / Second. DataBase Type: Random Access. Can Create Unlimited Databases. Programmable fields for any Application. Has Six Seperate Field Sets All Programmable. Build Time One Second, (Auto Creates DB). Setup Time: Instantly, Just Enter DB Name. Ultra Cheap Price, Special $20, Paypal Accepted. Application Mailed Instantly (file Attached Em...

Database Database Database Database Software Cheap
Database Database Database Database Software Cheap Great Datase Software See Website Below. Ultra Easy to Learn (Typically 30 Seconds) Professional Programmable Database Ver. 2.3 2.1 Million Record Capacity, (New cond). Search Rate: 2000 / Records / Second. DataBase Type: Random Access. Can Create Unlimited Databases. Programmable fields for any Application. Has Six Seperate Field Sets All Programmable. Build Time One Second, (Auto Creates DB). Setup Time: Instantly, Just Enter DB Name. Ultra Cheap Price, Special $20, Paypal Accepted. Application Mailed Instantly (file Attached Em...

Database Database Database Database Software Cheap
Database Database Database Database Great Datase Software See Website Below. Ultra Easy to Learn (Typically 30 Seconds) Professional Programmable Database Ver. 2.3 2.1 Million Record Capacity, (New cond). Search Rate: 2000 / Records / Second. DataBase Type: Random Access. Can Create Unlimited Databases. Programmable fields for any Application. Has Six Seperate Field Sets All Programmable. Build Time One Second, (Auto Creates DB). Setup Time: Instantly, Just Enter DB Name. Ultra Cheap Price, Special $20, Paypal Accepted. Application Mailed Instantly (file Attached Email). http://w...

Database Database Database Database Software Cheap
Database Database Database Database Software Cheap Great Datase Software See Website Below. Ultra Easy to Learn (Typically 30 Seconds) Professional Programmable Database Ver. 2.3 2.1 Million Record Capacity, (New cond). Search Rate: 2000 / Records / Second. DataBase Type: Random Access. Can Create Unlimited Databases. Programmable fields for any Application. Has Six Seperate Field Sets All Programmable. Build Time One Second, (Auto Creates DB). Setup Time: Instantly, Just Enter DB Name. Ultra Cheap Price, Special $20, Paypal Accepted. Application Mailed Instantly (file Attached Em...

Database Database Database Database Software Cheap
Database Database Database Database Software Cheap Great Datase Software See Website Below. Ultra Easy to Learn (Typically 30 Seconds) Professional Programmable Database Ver. 2.3 2.1 Million Record Capacity, (New cond). Search Rate: 2000 / Records / Second. DataBase Type: Random Access. Can Create Unlimited Databases. Programmable fields for any Application. Has Six Seperate Field Sets All Programmable. Build Time One Second, (Auto Creates DB). Setup Time: Instantly, Just Enter DB Name. Ultra Cheap Price, Special $20, Paypal Accepted. Application Mailed Instantly (file Attached Email). http://www.vehiclerepair.org/dbPro/dbpro.html ...

Database Database Database Database Software Cheap #2
Database Database Database Database Software Cheap Great Datase Software See Website Below. Ultra Easy to Learn (Typically 30 Seconds) Professional Programmable Database Ver. 2.3 2.1 Million Record Capacity, (New cond). Search Rate: 2000 / Records / Second. DataBase Type: Random Access. Can Create Unlimited Databases. Programmable fields for any Application. Has Six Seperate Field Sets All Programmable. Build Time One Second, (Auto Creates DB). Setup Time: Instantly, Just Enter DB Name. Ultra Cheap Price, Special $20, Paypal Accepted. Application Mailed Instantly (file Attached Em...

RE: [Informix][Informix ODBC Driver] Database locale information mismatch
You could try issuing the following statement and see what the engine is configured for. onstat -g env This will give you the environment of the engine. I believe it is listed there what the locale is set to. David -----Original Message----- From: informix-list-bounces@iiug.org [mailto:informix-list-bounces@iiug.org] On Behalf Of bobkot@gmail.com Sent: Tuesday, May 23, 2006 7:28 AM To: informix-list@iiug.org Subject: [Informix][Informix ODBC Driver] Database locale information mismatch I have download ClientSDK 2.90.TC4 I am trying to connect to an IDS10 database. My iLogin works fine, but I cannot set up the ODBC driver, I keep getting the message "[Informix][Informix ODBC Driver] Database locale information mismatch" I cannot leave it blank, under environment, and I cannot find any matching pairs. Can somebody help. XP client and Linux server _______________________________________________ Informix-list mailing list Informix-list@iiug.org http://www.iiug.org/mailman/listinfo/informix-list Version 10.00.UC4E is what I am running. How do I determine what the database was created with ? I have no customer support - that is me - so where to for the patches ? Would that be for the IDS or the SDK This is a multipart message in MIME format. --=_alternative 0023D97D65257178_= Content-Type: text/plain; charset="US-ASCII" To find out what's the database locale in your environment go to the server in...

Error executing remote system command on an AIX Informix database from an NT Informix Server
Dear All, I realise there are many queries and answers already posted on a similar topic, but none seem to be able to get this working. I have two informix servers, one on Windows NT and one on AIX 4.3. Informix NT (7.31) Informix AIX (7.xx) I have a stored procedure on the unix box with a system command SYSTEM '/usr/bin/ksh /usr/bin/env > /tmp/mylog' I have set up the trust, so that I can connect to the AIX instance as informix from the NT server. I connect from the NT server to the AIX instance as informix and execute the procedure. I get the following error - 668 Command cannot be executed 127 No Primary Key I think that the 127 error number is from the shell execution. The /tmp/mylog file is created but with no values. Even if I replace it with an echo hello command I get an empty file. Having read one of Jonathan Leffler's responses, the SHELL environment variables needs to be set to the the Shell of the remote system. In my case that is 'set SHELL=/usr/bin/ksh' . I did this and it still didn't work. Am I missing further environment variables as I am executing the procedure from NT. Has anyone managed to do this? Many thanks in advance, Nick Have you tryed it on aix itself?? does that work?? try: SYSTEM "(/usr/bin/ksh /usr/bin/env 2>&1) > /tmp/nonexistingfile"; -- check what is in nonexistingfile or SYSTEM "(/usr/bin/ksh ...

Database Database Database Software Cheap
Database Database Database Database Software Cheap Great Datase Software See Website Below. Ultra Easy to Learn (Typically 30 Seconds) Professional Programmable Database Ver. 2.3 2.1 Million Record Capacity, (New cond). Search Rate: 2000 / Records / Second. DataBase Type: Random Access. Can Create Unlimited Databases. Programmable fields for any Application. Has Six Seperate Field Sets All Programmable. Build Time One Second, (Auto Creates DB). Setup Time: Instantly, Just Enter DB Name. Ultra Cheap Price, Special $20, Paypal Accepted. Application Mailed Instantly (file Attached Em...

Web resources about - Re: Restore Informix software & Database to another server - comp.databases.informix

IBM Informix - Wikipedia, the free encyclopedia
IBM Informix is a product family within IBM's Information Management division that is centered on several relational database management system ...

IBM Informix (@IBM_Informix) on Twitter
Sign in Sign up To bring you Twitter, we and our partners use cookies on our and other websites. Cookies help personalize Twitter content, tailor ...

Informix - News, Features, and Slideshows
Latest news, features, and slideshows on Informix from Computerworld

Informix Database Administrator / Developer
Defining Technology for Australia's IT Leaders.

Informix technology whiz bails out for Andromedia
San Francisco, CA News - View Daily Local Business News, Resources & more in San Francisco, California. Informix, the Menlo Park-based database ...

S&P Stock Reports: Informix Corp.
Revenues in the first quarter of 1997 declined over 30%, owing to sluggishness associated with product transition uncertainties stemming from ...

Informix says Oracle is "sleazy"
... A CNET article by CNET News.com Staff, . Published on January 24, 1997 12:30 PM PST. No love has ever been lost between database makers Informix ...

IBM Acquires Informix
IBM took a major step today in its effort to strengthen its software business and take down Oracle by agreeing to acquire Informix Software's ...

The Four HundredIBM Buys Other Half of Informix with Ascential Acquisition
IBM Buys Other Half of Informix with Ascential Acquisition by Timothy Prickett Morgan Four years ago, in April 2001 to be precise, IBM bought ...

IBM's Informix buya billion dollars worth of benefit?
So IBM is buying Informix Software, Informix Corp.'s database unit and the heart of the company.

Resources last updated: 3/2/2016 5:11:34 PM