f



Control + Tab between subforms on tab control pages ACC 2002

Greetings!
What I am looking for is help trying to accomplish control + tab
exiting subform #1 on page #1 and entering the first control (main
form) on page #2.  I've tried the following code, however it seems to
"fire twice", placing me at the first control on subform #2 on page
#3, totally skipping page #2. It seems to very briefly stop the
control on page two, but keeps going.  Hope that made sense.  Key
preview for subform is set to yes.  This is a continous subform, so
options to leave subform on last control won't work.  That's why I'm
trying to use control tab.  I'd appreciate any suggestions.

Private Sub Form_KeyDown(KeyCode As Integer, Shift As Integer)

If KeyCode = vbKeyTab And Shift = 2 Then

DoCmd.GoToControl "txtZoningClass+"

End If

End Sub
0
9/13/2004 6:39:22 PM
comp.databases.ms-access 42670 articles. 0 followers. Post Follow

2 Replies
638 Views

Similar Articles

[PageSpeed] 41

The problem is probably that you did not assign KeyCode = 0 in your handler.
Thus, after your code runs, the keypress is also processed normally.

On 13 Sep 2004 11:39:22 -0700, brian.flannery@ci.verona.wi.us (Brian) wrote:

>Greetings!
>What I am looking for is help trying to accomplish control + tab
>exiting subform #1 on page #1 and entering the first control (main
>form) on page #2.  I've tried the following code, however it seems to
>"fire twice", placing me at the first control on subform #2 on page
>#3, totally skipping page #2. It seems to very briefly stop the
>control on page two, but keeps going.  Hope that made sense.  Key
>preview for subform is set to yes.  This is a continous subform, so
>options to leave subform on last control won't work.  That's why I'm
>trying to use control tab.  I'd appreciate any suggestions.
>
>Private Sub Form_KeyDown(KeyCode As Integer, Shift As Integer)
>
>If KeyCode = vbKeyTab And Shift = 2 Then
>
>DoCmd.GoToControl "txtZoningClass+"
>
>End If
>
>End Sub

0
nospam48 (2784)
9/13/2004 7:10:44 PM
Thanks, Steve.....that did it.  Appreciate the help!!!


Steve Jorgensen <nospam@nospam.nospam> wrote in message news:<j5sbk0dro2bklqpc990bvn317mltntq11n@4ax.com>...
> The problem is probably that you did not assign KeyCode = 0 in your handler.
> Thus, after your code runs, the keypress is also processed normally.
> 
> On 13 Sep 2004 11:39:22 -0700, brian.flannery@ci.verona.wi.us (Brian) wrote:
> 
> >Greetings!
> >What I am looking for is help trying to accomplish control + tab
> >exiting subform #1 on page #1 and entering the first control (main
> >form) on page #2.  I've tried the following code, however it seems to
> >"fire twice", placing me at the first control on subform #2 on page
> >#3, totally skipping page #2. It seems to very briefly stop the
> >control on page two, but keeps going.  Hope that made sense.  Key
> >preview for subform is set to yes.  This is a continous subform, so
> >options to leave subform on last control won't work.  That's why I'm
> >trying to use control tab.  I'd appreciate any suggestions.
> >
> >Private Sub Form_KeyDown(KeyCode As Integer, Shift As Integer)
> >
> >If KeyCode = vbKeyTab And Shift = 2 Then
> >
> >DoCmd.GoToControl "txtZoningClass+"
> >
> >End If
> >
> >End Sub
0
9/14/2004 1:13:39 PM
Reply:

Similar Artilces:

Tab control in one of the tabs of another tab control
One of my colleagues is working with a tab control. He has several tabs. He is trying to embed another tab control inside one of the tabs of the first tab control. He had placed the second tab control inside one of the tabs of the first tab control. But the problem is that the second tab control does not show up (unless one goes to the block diagram and double clicks the second tab control, only then does it shows up; when the vi is closed and reopened its again not there). I told him that I had never seen such functionality (a tab control inside another tab control) in any application but is it somehow possible. All this is required while the VI is not running and is being developed (of course it should work at run time, but this functionality must show while the VI is not running, i.e., this functionality should be non-programmatic. Is it possible. Thanks for your time. Hi rashid, yes it is possible. See the attached example. I see no problems with it.Hope it helps.Mike Untitled_LV71.vi: http://forums.ni.com/attachments/ni/170/323165/1/Untitled_LV71.vi Thanks <a href="../view_profile?user.id=88992" class="auth_text" style="font-weight: bold;" target="_blank"> MikeS81</a>! Yes you are absolutely right. Your VI is working perfectly. I wonder what has my friend done to get such behaviour as he is getting. Strange! Thanks for the help!Have a very nice day! Hi rashid, can you upload your vi, maybe someone found the proble...

How can I set the tab order of text box controls on each page of a tab control?
I need to be able to select the tabbing order of individual controls on a single page of a tabbed control. How?? In LV 6.1 an up you should be ablel to right click on the edge of the tab control when the tab-page in question is selected. The bttom selcetion in the pop-up is "Reoder controls in page..." selecting this option will switch editing modes to allow you to specify the ored, just like in a cluster. I seem to remeber in older versions you had to drag the tabable controls off the tab control, specify the tabbing oder and then drag them back on. The oldest version I have on ...

Tab Events of Access Application ? (NOT Access Tab Control)
I'm trying to use the event when a person moves to a different form by clicking on the built in Access application tabs. Is there something I can reference or does it require some kind of subclassing/hook api calls? Thanks On Jul 21, 9:47=A0pm, "christianlo...@yahoo.com" <christianlo...@yahoo.com> wrote: > I'm trying to use the event when a person moves to a different form by > clicking on the built in Access application tabs. > > Is there something I can reference or does it require some kind of > subclassing/hook api calls? > > Thanks Hi Christian, You can use the OnDeactivate event. Imb. > You can use the OnDeactivate event. Hello Imb, Aha. Now I am forced to make an event for each form. Trying to automate what tab the ribbon moves to based on the access application tab. Okay, thanks. Access could use a rewrite of it's event system imho. There are no top level application events to tap into, no 'after delete' event, record saves w/ a 'dirty=true', it's all quite ridiculous. I was hoping the new table events would be the solution but they come up w/ this 'data macro' crap where there doesn't seem to be any way to call your own code on the event. Sometimes I wonder if the ms developers ever use Access. However, I love the report and form design improvements. <christianlott1@yahoo.com> wrote in message news:ba72c614-57c0-4045-9af0-3cd9734e923b@r18g2000vbs.googlegro...

tab control inside another tab control
Hi. Is it possible to put a tab control inside another tab control. I tried it several times, but for some reason this doesn't seem to work. Can someone confirm this, or tell me what the trick is. Thanks. -- Georges The only way I know to do this is to put a subform on the first tab control. Then you can put your second tab control on the subform. If you do this repeatedly, however, you will find the form loading rather slowly. HTH - Turtle "Georges Heinesch" <news@geohei.lu> wrote in message news:3fe82fb8$1_2@news.vo.lu... > Hi. > > Is it possible to...

Tab control within another tab control
I am creating a form with a tab control containing 10 tabs. and what I want to do is on only on of the tabs, I want a sub section of tabs. So what it ends up being is one main tab control with another tab control embedded into only one of the tab pages. The problem I am getting is when I insert the sub section tab control into one of the tabs from the main tab control, the sub section tab control appears in every tab in the main tab control. Can anyone help? What do I need to do so it only appears in one tab, not all. Thanks As you found, you cannot place a tab control on one of the pages...

Syntax form moving from page-to-page (actually, Tab-toTab) in Tab Control on form?
I thought it was DoCmd.GoToPage - but that doesn't work for Tab Controls, it seems - only for forms with page breaks in them. Anybody know Syntax form moving from page-to-page (actually, Tab-toTab) in Tab Control on form? On Wed, 15 Feb 2006 06:31:38 -0500, MLH <CRCI@NorthState.net> wrote: >I thought it was DoCmd.GoToPage - but that doesn't work for >Tab Controls, it seems - only for forms with page breaks in them. > >Anybody know Syntax form moving from page-to-page (actually, >Tab-toTab) in Tab Control on form? Courtesy of Rick Brandt in another thread... The TabControl has a Value property that corresponds to the the page index of the currently selected TabPage. Setting that value brings the TabPage with that index to the front. For example to switch to the 3rd TabPage... Me.TabControlName = 2 (index starts at zero) Thx, Rick. ...

Getting XP look with tabbed dialog control and tab strip control
I know how to use a manifest file to get the XP look for the Windows Common Controls 6 group of controls but I also have both the tabbed dialog and tab strip controls in my app and I want those to take on the XP look as well. Does anyone know how? Also, while I am able to get the XP look through a manifest file in my app's folder I should be able to do this without the file having to be in the app's folder. I've read it has to do with compiling with a resource file but I don't know how to do that. Can anyone offer any assistance? Thanks! ...

Names of textboxes on tab-pages within a tab control?
I have a tab control named TabCtl210. It has 3 tabs. named Page211, Page212 and Page213. Each of those 3 tab-pages has a textbox control named Page1HomeSpot, Page2HomeSpot and Page3HomeSpot respectively. I got an error #2109: "There is no field named Page1HomeSpot in the current record" There's only one line of code in the entire form module that references the control: Private Sub Page1() DoCmd.GoToControl ("Page1HomeSpot") End Sub Under what circumstances would Access give em this error? Try: Me.Page1HomeSpot.SetFocus If that still fails, and you are certain you have a text box with that name on your form, it sounds like Access is confused about the names. Try this sequence: 1. Uncheck the boxes under: Tools | Options | General | Name AutoCorrect Explanation of why: http://allenbrowne.com/bug-03.html 2. Compact the database to get rid of this junk: Tools | Database Utilities | Compact/Repair 3. Close Access. Make a backup copy of the file. Decompile the database by entering something like this at the command prompt while Access is not running. It is all one line, and include the quotes: "c:\Program Files\Microsoft office\office\msaccess.exe" /decompile "c:\MyPath\MyDatabase.mdb" 4. Open Access (holding down the Shift key if you have any startup code), and compact again. 5. Open a code window. Choose References from the Tools menu. Uncheck any references you do not need. For a list of the ...

attractive css, xp tab(page) control and grid control
This is a multi-part message in MIME format. ------=_NextPart_000_002E_01C57C0C.EE04A220 Content-Type: text/plain; charset="windows-874" Content-Transfer-Encoding: quoted-printable Hi, Any site I can download free css and xp tab/page/grid web script ? Regards Hoe ------=_NextPart_000_002E_01C57C0C.EE04A220 Content-Type: text/html; charset="windows-874" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=3DContent-Type content=3D"text/html; = charset=3Dwindows-874"> <META content=3D"MSHTML 6.00.2900.2180" name=3DGENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=3D#ffffff> <DIV><FONT face=3DArial size=3D2>Hi,</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV> <DIV><FONT face=3DArial size=3D2>Any site I can download free css and xp = tab/page/grid web&nbsp;script ?</FONT></DIV> <DIV><FONT face=3DArial size=3D2></FONT>&nbsp;</DIV> <DIV><FONT face=3DArial size=3D2>Regards</FONT></DIV> <DIV><FONT face=3DArial size=3D2>Hoe</FONT></DIV></BODY></HTML> ------=_NextPart_000_002E_01C57C0C.EE04A220-- ...

Refs to controls on tab control
I'm really stumped. I have been able to get all of my references to all my controls with property nodes - even controls inside clusters for all of the controls on a vi front panel. However, when I move these very same controls onto a tab control&nbsp;I can't seem to figure out how to get these same&nbsp;references! I can only get the tab control ref. :smileyindifferent: &nbsp; &nbsp; <img src="http://forums.ni.com/attachments/ni/170/243049/1/Cotrols%20on%20pages.JPG"> BenMessage Edited by Ben on 04-20-2007 05:01 PM Cotrols on pages.JPG: http://forums.ni.com/attachments/ni/170/243049/1/Cotrols on pages.JPG ...

Hide a tab on a tab control
Dear All, I have a tab control with about 5 tabs on it. Depending on who logs on, I want to hide one particular tab. How do I do it? thanks John Fox Per John Fox: >Dear All, > >I have a tab control with about 5 tabs on it. > >Depending on who logs on, I want to hide one particular tab. > >How do I do it? Code below selects different tabs and makes some tabs invisible. 2160 With Me.tabMain 2161 If .Value = mTabMain_Page_Security Then 'If user walking a compressed list, don't want tb jumping back to sec if looking at docs 2162 If ..Pages(mTabMain_Page_CompanyGroupIssuer).Visible = True Then 2163 .Value = mTabMain_Page_CompanyGroupIssuer 2164 End If 2165 End If 2169 End With 2170 With Me.tabMain 2171 .Pages(mTabMain_Page_Security).Visible = False 2172 .Pages(mTabMain_Page_Allocations).Visible = False 2179 End With -- PeteCresswell Thank you - sorted! John (PeteCresswell) wrote: > Per John Fox: >> Dear All, >> >> I have a tab control with about 5 tabs on it. >> >> Depending on who logs on, I want to hide one particular tab. >> >> How do I do it? > > Code below selects different tabs and makes some tabs invisible. > > 2160 With Me.tabMain > 2161 If .Value = mTabMain_Page_Security Then 'If > user walking a compresse...

Tab Indexing in a Tab Control
Anyone know why when I set my tabs index in my tab control (I have 3 tabs on the control) the numbering gets messed up when I save the form changes? I thought each tab on the control had an independent tab index, I guess not. Marcus ****** Just a suggestion, the Tab Index for a container (Tab Page) is different than the Page Index for a Tab Control. You might be thinking that the Tab Index is related to the Tab Pages. The order of the pages is Page Index. (Right Click Page Order) The order of the controls on a page, form or other container control is Tab Index. (Right Click Tab Order) Tab, in this case means the Tab key on your key board. As you hit the tab key the focus moves from control to control based on the order of the index of each control and whether or not the control has it's Tab Stop property set to True. As far as I know, each Tab Page does have a collection of controls, where each control will have a Tab Index in that Tab Page collection. The indexes stay the same for me. That is, when I set the Tab Index for each control on a Tab Page, it remains the same after saving. If I change the Tab Index for each control on another Tab Page, it remains the same also, and it does not affect any other Tab Page control collection index. Hope This Helps ...

Syntax of control on tab controls
I have a form "frmturnover" on which there is asubform "subfrmturnover" which has three tabcontrols say Page1, Page2 and Page3. There is control "control2" on Page2 that when its is entered I want to check if it is the same value as a control "control1" on Page1 and then show a pop up box if they don't match. I can work out the code for the message box but I'm getting a little lost on the syntax for referring to the controls on the pages of the tab control. I also want to check the value of Control2 on page2 with the vale of control3 on a page1 of a subform "subfrmmain" on another form "frmmain" can anyone point me in the right direction? TIA Tony Williams "Tony Williams" <tw@tcpinvalid.com> wrote in message news:<coo2hr$285$1@sparta.btinternet.com>... > I have a form "frmturnover" on which there is asubform "subfrmturnover" > which has three tabcontrols say Page1, Page2 and Page3. There is control > "control2" on Page2 that when its is entered I want to check if it is the > same value as a control "control1" on Page1 and then show a pop up box if > they don't match. I can work out the code for the message box but I'm > getting a little lost on the syntax for referring to the controls on the > pages of the tab control. > I also want to check the value of Control2 on page2 with the vale of > control3 on a page1 ...

Vertical Tabs on Tab Control?
Hi Folks: I've used conventional horizontal tabs on one application. Now I'd like to have a row of tabs, representing each letter of the alphabet, running down the right side of a tab control. These are owner drawn tabs. I have questions. I want a single line of alphabet tabs. If the control shrinks to too small to show all of the tabs, I'd like them to display a ragged edge, and arrows in order to scroll them. Instead, multiple lines of tabs are drawn. The Resource Editor's "Tab Control Properties" window has "Multiline...

tabbing order in tab controls
Hi How can I set the tabbing order of controls in a tab control on the front panel when having several other controls on the front panel. Right-click on the tab and select "Reorder controls In page" from the menu that pops up. This is not exactly what I meant. When I'm creating a local variable I can choose its destination (right-click - select item). Because there are so many I would like to reorder the tabbing order to choose the correct on the top. All this action are taken in the block diagramm. From the edit menu, select Set Tabbing order changing the tabbing order will also change the order the variables are listed when you want to list or select a local variable ...

Tab control pages
I have a tab control. How can I check in an if statement which page in the tab control is currently open or visible? I tried using TabCtl.TabIndex, but that always returns 0 no matter which tab I'm on. Thanks Nevermind...I tried using TabPageName.Visible and it worked. "Enterprise" <someone@microsoft.com> wrote in message news:vNDCc.16153$Wr.2643@newsread1.news.pas.earthlink.net... > I have a tab control. How can I check in an if statement which page in the > tab control is currently open or visible? > I tried using TabCtl.TabIndex, but that always returns 0 no ...

Can a Combo Box control a Tab Control, like an Enumerated Ring control can
Is there any way to have a Combo Box control a Tab Control.&nbsp; An Enumerated Ring control can if all the names match "Exactly", question is can a Combo Box do the same, especially within an Event Structure? I haven't been able to figure it out.&nbsp; Enclosed is a test VI that has an enumerated ring example, and a combo box with the same data.&nbsp; Thanks for your help... Test Tab Control [1].vi: http://forums.ni.com/attachments/ni/170/215375/1/Test Tab Control [1].vi A tab control can be treated like an enum, so your question comes down to: "Can I map a ...

Control Container inside a Tab Control
Is there a generic container that can go in a tab control? I cant seem to get a tab control (which can hold many types of other controls) to be contained by another tab control. My main form uses a tab control (8 pages). On each page I would like to have a few groups of controls (no tabs in the group, just buttons, combos etc). I thought the tab would be a great container, but I cant put it on the 'main' tab control. Any ideas? (Currently I'm using a naming scheme) TIA No. There is no control array, and you cannot insert a tab control on a page of another tab control. You can put a subform on the page of a tab control, and the subform can contain its own tab control. -- Allen Browne - Microsoft MVP. Perth, Western Australia. Tips for Access users - http://allenbrowne.com/tips.html Reply to group, rather than allenbrowne at mvps dot org. <cefrancke@yahoo.com> wrote in message news:1111241572.858053.147460@z14g2000cwz.googlegroups.com... > Is there a generic container that can go in a tab control? I cant seem > to get a tab control (which can hold many types of other controls) to > be contained by another tab control. > > My main form uses a tab control (8 pages). On each page I would like to > have a few groups of controls (no tabs in the group, just buttons, > combos etc). I thought the tab would be a great container, but I cant > put it on the 'main' tab control. > > Any ideas? (Currently I'm using a nam...

Tab Control
Hi, all! &nbsp; I would like to customize Tabs on the Tab Control. More exactly - I would like to add bevels to the tabs as shown below: &nbsp; <img src="http://vi-lib.com/forForum/TabControlwithBevel.jpg"> &nbsp; Is it theoretically possible? May be&nbsp;some workarounds exists? &nbsp; with best regards, &nbsp; Andrey. Hi, TiTou, This requirement coming from corporate UI Guidelines, where shapes of Tabs strongly predefined. I can do required "skinning" for most controls which can be customezed, but unfortunately not for Tab Control... Andrey...

Maximum Number Of Controls On A Tab Control
Is there a "best practice" maximum number of controls that can be loaded on to a tab control before things start getting messy and sluggish? I'm asking for a "best practice" maximum number across all tabs and not the maximum number that is theoretically possible. I figure that trying to add lots of controls to lots of tabs must affect performance at some point. Any help is appreciated. Wayne wrote: > Is there a "best practice" maximum number of controls that can be > loaded on to a tab control before things start getting messy and > sluggish? I'm asking for a "best practice" maximum number across all > tabs and not the maximum number that is theoretically possible. > > I figure that trying to add lots of controls to lots of tabs must > affect performance at some point. > > Any help is appreciated. There is a maimum number of controls on a Form. Not sure about a TabControl. Think of it this way. A TabControl is just a handy way of toggling the visibility of a bunch of controls all at the same time. It likely has almost no affect on performance at all. Certainly not any that I have been able to perceive. -- Rick Brandt, Microsoft Access MVP Email (as appropriate) to... RBrandt at Hunter dot com On 9 Mar 2007 18:35:53 -0800, "Wayne" <cqdigital@volcanomail.com> wrote: In some applications tab controls contain subforms. If things get sluggish I typically only...

Tab Control
Is there a way to lock all the items on a tab in a form without having to list each field and lock individually? I see a way to enable/ disable, but not lock. Thanks, Laura On Mar 10, 5:58=A0pm, musicloverlch <lho...@gmail.com> wrote: > Is there a way to lock all the items on a tab in a form without having > to list each field and lock individually? =A0I see a way to enable/ > disable, but not lock. > > Thanks, > Laura What I usually do is hide the tab. But if you want the user to see the data, you'll probably have to go through each control one by one and lock each. -- GL ...

Tab control tabs dissapear when clicked
I have yet another problem with the infamous tab control in my Access 97 database. I have a form with a tab control with 4 tabs on each tab is a sub form bound to a form. When the main form loads the vertical scroll bar moves the main form down just low enough to were one can't see the tabs on the tab control. Once you scroll back to the top of the main form and click on one of the four tabs the sub form on that tab becomes visible but the same scenario as above happens. The main form vertical scroll bar once again moves down just low enough to were you can't see the tabs until you scroll back to the top. Does anyone know why this would be happening? I have tried every possible combination of repositioning controls and changing settings and nothing works. Any help would be much appreciated. Thanks in advance, Mark C. I found the answer at the following site. http://www.kbalertz.com/kb_Q298358.aspx "Mark C" <hereinde@yahoo.com> wrote in message news:-9GdnRdu97nH-uXcRVn-3Q@comcast.com... >I have yet another problem with the infamous tab control in my Access 97 >database. I have a form with a tab control with 4 tabs on each tab is a sub >form bound to a form. When the main form loads the vertical scroll bar >moves the main form down just low enough to were one can't see the tabs on >the tab control. Once you scroll back to the top of the main form and click >on one of the four tabs the sub form on that tab beco...

Tab order on multirow tab control
Is there a way to stop the default action of a multirow tab control whereby the row with focus moves to the front of the tabs? I find this behaviour annoying and confusing to the user and am at a loss as to why MS has designed their tab controls like this. Wayne wrote: > Is there a way to stop the default action of a multirow tab control > whereby the row with focus moves to the front of the tabs? I find > this behaviour annoying and confusing to the user and am at a loss as > to why MS has designed their tab controls like this. ALL multi-row tabs act this way. How else can you identify the active tab except by moving it to the front? Try the Buttons format instead of the Tabs format. The buttons don't move. -- I don't check the Email account attached to this message. Send instead to... RBrandt at Hunter dot com Rick, I guess I hadn't thought about the fact that the tab needs to move to the front row as you have explained. Maybe it would be more intuitive to the user to highlight the tab by having its text go bold when selected instead of changing the tab row order. That way the user would always find the required tab in the same place instead of having to hunt for it. What do other users think or am I the only one who finds the action of the tab control confusing - maybe I'm easily confused. :-) Anyhow, thanks for the info Rick - it's much appreciated. "Wayne" <cqdigital@volcanomail.com...

Change values of Tabs on Tab Control
I have a LabVIEW application where it is possible to change the language on the front panel, in connection with this I want to change the names/labels of the Tabs on a Tab Control. Is this possible? Hi Labbie, yes it is possible. See the attachment. Mike Unbenannt 1_LV80.vi: http://forums.ni.com/attachments/ni/170/311358/1/Unbenannt 1_LV80.vi Awesome all... got what i needed. &nbsp; Peace, &nbsp; Pete ...

Web resources about - Control + Tab between subforms on tab control pages ACC 2002 - comp.databases.ms-access

Envia Forms on the App Store on iTunes
Get Envia Forms on the App Store. See screenshots and ratings, and read customer reviews.

Antheraea polyphemus - Wikipedia, the free encyclopedia
It is a tan-colored moth, with an average wingspan of 15 cm (6 in). The most notable feature of the moth is its large, purplish eyespots on its ...

LiveCycle ES2 technical articles
For the complete experience, please enable JavaScript in your browser. Thank you! Products How to Buy Learn & Support About Adobe Creative Cloud ...

A Look Under the Hood
There’s an excellent article in Nature Reviews Drug Discovery that summarizes the state of the HDL-raising drug world. It will also serve as ...

Welcome to dbase
Cust_Ser_Tech_Support web site

Trafik – Heyevent.com
The world's best event guide. Discover interesting events in your city. Bonus: Sign in with Facebook to get personal event recommendations.

Powerful and Flexible Form Builder
... form building framework. Using simple Javascript commands, you can add skip logic, conditional elements and even interconnected forms and subforms. ...

Rihanna And Kim Kardashian The Latest Victims Of “The Fappening”
... iCloud service before they quickly faded from the news cycle. Shortly after the scandal became national news, Reddit banned all posts and subforms ...

CLHS: Issue Index (Alphabetic)
Alphabetical index of X3J13 issues: &ENVIRONMENT-BINDING-ORDER:FIRST ACCESS-ERROR-NAME ADJUST-ARRAY-DISPLACEMENT ADJUST-ARRAY-FILL-POINTER A ...

Survey Builder App - Bulk Text Messaging - Magpi
Magpi brings the benefits of mobile data collection and messaging to life: time savings, improved data quality, and affordable communication - ...

Resources last updated: 3/21/2016 2:39:46 PM