f



phpMyAdmin - error 1045 - Access denied for user 'root'@'localhost' (using password: NO)

Hello, I tried to install phpMyAdmin to localhost and last 7 hours I
can't solve out the error message I wrote in subject... I am getting
crazy about this.

So, in order, I've downloaded and unzipped phpmyadmin to "root/
phpmyadmin/" and have set the config.inc.php like this:

cfg['PmaAbsoluteUri'] = '';
$cfg['Servers'][1]['host'] = 'localhost'; // MySQL hostname or IP
address
$cfg['Servers'][1]['port'] = ''; // MySQL port - leave blank for
default port
$cfg['Servers'][1]['socket'] = ''; // Path to the socket - leave blank
for default socket
$cfg['Servers'][1]['connect_type'] = 'tcp'; // How to connect to MySQL
server ('tcp' or 'socket')
$cfg['Servers'][1]['extension'] = 'mysql'; // The php MySQL extension
to use ('mysql' or 'mysqli')
$cfg['Servers'][1]['auth_type'] = 'config'; // Authentication method
(config, http or cookie based)?
$cfg['Servers'][1]['user'] = 'root'; // MySQL user
$cfg['Servers'][1]['password'] = 'xxx'; // MySQL password

I am sure I entered correct password and user name.

The strange thing is that when I change the value for $cfg['Servers']
[1]['user'] to something else (not 'root' but to example 'rrrrrrr') I
recieve the error message 1045 " ... Access denied for user
'root'@'localhost' ... "again. Even if I change the value for
$cfg['Servers'][1]['user'] it always reports it as 'root' in that
error report. Seems to me that the application doesn't cooperate with
its own config file... I even tried more config.inc.php files to
resolve my problem but without any success...

Any ideas?

Thanx in advance

0
miuss (15)
7/4/2007 4:42:11 PM
comp.databases.mysql 6944 articles. 1 followers. laredotornado (869) is leader. Post Follow

3 Replies
873 Views

Similar Articles

[PageSpeed] 14

MIUSS wrote:
> Hello, I tried to install phpMyAdmin to localhost and last 7 hours I
> can't solve out the error message I wrote in subject... I am getting
> crazy about this.
> 
> So, in order, I've downloaded and unzipped phpmyadmin to "root/
> phpmyadmin/" and have set the config.inc.php like this:
> 
> cfg['PmaAbsoluteUri'] = '';
> $cfg['Servers'][1]['host'] = 'localhost'; // MySQL hostname or IP
> address
> $cfg['Servers'][1]['port'] = ''; // MySQL port - leave blank for
> default port
> $cfg['Servers'][1]['socket'] = ''; // Path to the socket - leave blank
> for default socket
> $cfg['Servers'][1]['connect_type'] = 'tcp'; // How to connect to MySQL
> server ('tcp' or 'socket')
> $cfg['Servers'][1]['extension'] = 'mysql'; // The php MySQL extension
> to use ('mysql' or 'mysqli')
> $cfg['Servers'][1]['auth_type'] = 'config'; // Authentication method
> (config, http or cookie based)?
> $cfg['Servers'][1]['user'] = 'root'; // MySQL user
> $cfg['Servers'][1]['password'] = 'xxx'; // MySQL password
> 
> I am sure I entered correct password and user name.
> 
> The strange thing is that when I change the value for $cfg['Servers']
> [1]['user'] to something else (not 'root' but to example 'rrrrrrr') I
> recieve the error message 1045 " ... Access denied for user
> 'root'@'localhost' ... "again. Even if I change the value for
> $cfg['Servers'][1]['user'] it always reports it as 'root' in that
> error report. Seems to me that the application doesn't cooperate with
> its own config file... I even tried more config.inc.php files to
> resolve my problem but without any success...
> 
> Any ideas?
> 
> Thanx in advance
> 
there's got to be a $cfg['Servers'][0] where you set up your local one 
first and then all the other servers you'd like to setup (possibly 
remote ones) can go in subsequent members of the array such as 1 and 2 etc.



-- 
lark -- hamzee@sbcdeglobalspam.net
To reply to me directly, delete "despam".
0
lark
7/4/2007 5:00:20 PM
lark napsal(a):
> MIUSS wrote:
> > Hello, I tried to install phpMyAdmin to localhost and last 7 hours I
> > can't solve out the error message I wrote in subject... I am getting
> > crazy about this.
> >
> > So, in order, I've downloaded and unzipped phpmyadmin to "root/
> > phpmyadmin/" and have set the config.inc.php like this:
> >
> > cfg['PmaAbsoluteUri'] = '';
> > $cfg['Servers'][1]['host'] = 'localhost'; // MySQL hostname or IP
> > address
> > $cfg['Servers'][1]['port'] = ''; // MySQL port - leave blank for
> > default port
> > $cfg['Servers'][1]['socket'] = ''; // Path to the socket - leave blank
> > for default socket
> > $cfg['Servers'][1]['connect_type'] = 'tcp'; // How to connect to MySQL
> > server ('tcp' or 'socket')
> > $cfg['Servers'][1]['extension'] = 'mysql'; // The php MySQL extension
> > to use ('mysql' or 'mysqli')
> > $cfg['Servers'][1]['auth_type'] = 'config'; // Authentication method
> > (config, http or cookie based)?
> > $cfg['Servers'][1]['user'] = 'root'; // MySQL user
> > $cfg['Servers'][1]['password'] = 'xxx'; // MySQL password
> >
> > I am sure I entered correct password and user name.
> >
> > The strange thing is that when I change the value for $cfg['Servers']
> > [1]['user'] to something else (not 'root' but to example 'rrrrrrr') I
> > recieve the error message 1045 " ... Access denied for user
> > 'root'@'localhost' ... "again. Even if I change the value for
> > $cfg['Servers'][1]['user'] it always reports it as 'root' in that
> > error report. Seems to me that the application doesn't cooperate with
> > its own config file... I even tried more config.inc.php files to
> > resolve my problem but without any success...
> >
> > Any ideas?
> >
> > Thanx in advance
> >
> there's got to be a $cfg['Servers'][0] where you set up your local one
> first and then all the other servers you'd like to setup (possibly
> remote ones) can go in subsequent members of the array such as 1 and 2 etc.
>
>
>
> --
> lark -- hamzee@sbcdeglobalspam.net
> To reply to me directly, delete "despam".

I tried what you wrote but got the same result as before... :-(

Is it possible that somewhere in the phpMyAdmin is set another
configuration file, not the config.inc.php? Because above the error
1045 is written: The probably cause of this error is that you haven't
created configuration file. For its creating you might use setting
script. I've tried some things with this setting script but haven't
success and gave it up, now I'm trying to set the config.inc.php file
because I think it's easiest way to run my phpMyAdmin....

0
MIUSS
7/5/2007 6:25:31 AM
lark napsal(a):
> MIUSS wrote:
> > Hello, I tried to install phpMyAdmin to localhost and last 7 hours I
> > can't solve out the error message I wrote in subject... I am getting
> > crazy about this.
> >
> > So, in order, I've downloaded and unzipped phpmyadmin to "root/
> > phpmyadmin/" and have set the config.inc.php like this:
> >
> > cfg['PmaAbsoluteUri'] = '';
> > $cfg['Servers'][1]['host'] = 'localhost'; // MySQL hostname or IP
> > address
> > $cfg['Servers'][1]['port'] = ''; // MySQL port - leave blank for
> > default port
> > $cfg['Servers'][1]['socket'] = ''; // Path to the socket - leave blank
> > for default socket
> > $cfg['Servers'][1]['connect_type'] = 'tcp'; // How to connect to MySQL
> > server ('tcp' or 'socket')
> > $cfg['Servers'][1]['extension'] = 'mysql'; // The php MySQL extension
> > to use ('mysql' or 'mysqli')
> > $cfg['Servers'][1]['auth_type'] = 'config'; // Authentication method
> > (config, http or cookie based)?
> > $cfg['Servers'][1]['user'] = 'root'; // MySQL user
> > $cfg['Servers'][1]['password'] = 'xxx'; // MySQL password
> >
> > I am sure I entered correct password and user name.
> >
> > The strange thing is that when I change the value for $cfg['Servers']
> > [1]['user'] to something else (not 'root' but to example 'rrrrrrr') I
> > recieve the error message 1045 " ... Access denied for user
> > 'root'@'localhost' ... "again. Even if I change the value for
> > $cfg['Servers'][1]['user'] it always reports it as 'root' in that
> > error report. Seems to me that the application doesn't cooperate with
> > its own config file... I even tried more config.inc.php files to
> > resolve my problem but without any success...
> >
> > Any ideas?
> >
> > Thanx in advance
> >
> there's got to be a $cfg['Servers'][0] where you set up your local one
> first and then all the other servers you'd like to setup (possibly
> remote ones) can go in subsequent members of the array such as 1 and 2 etc.
>
>
>
> --
> lark -- hamzee@sbcdeglobalspam.net
> To reply to me directly, delete "despam".

I am completely confused of using phpmyadmin, when I want to run
phpmyadmin by entering the localhost/phpmyadmin to adress, I get the
error 1045. After then I tried that hyperlink "Open phpmyadmin's new
window" and I can see all my tables... I am happy that I can use it
for now but I deffinitly don't know what's going on there.....

I would like to know... I will hardly appreciate a short explanation.

Thanks in advance!

0
MIUSS
7/5/2007 7:55:20 AM
Reply:

Similar Artilces:

'''''''''''''The Running Update/Append Queries Using VBA code Ordeal''''''''''''''
Hello fellow programmers, I am trying to run an append/update query from code, a command button on a form initiates the queries. the format i am using is; _____________________________________________________ SELECT "criteria" FROM "criteria" WHERE "criteria" UPDATE/APPEND "field selections" RecordSource "qryExample" = above text strings" _______________________________________________________________________ When i am running a SELECT query in this manner it works fine with no problems, and accepts the values of specified linked for...

'''''''''''''The Running Update/Append Queries Using VBA code Ordeal'''''''''''''' #2
Hi, Thanks for ur help there HJ. I know how to do the tasks you specified there. I would like for the update query to use field values from some of the fields on the form (frmInvoices) such as InvoiceNumber, DateFrom, DateTo. My problem is that an append/update query can't find the values in the open Form (frmInvoices) when I specify them as; [Forms]![frmInvoices]![InvoiceNumber] a select query has no problem finding the field values on a form. please help. Aaron Hi Aaron, Could you post the entire code that you are having trouble with? Now it is not possible to see what goes wrong. HJ "Aaron" <aaron@rapid-motion.co.uk> wrote in message news:260d7f40.0408120245.2f3d01f8@posting.google.com... > Hi, > > Thanks for ur help there HJ. > > I know how to do the tasks you specified there. > > I would like for the update query to use field values from some of the > fields on the form (frmInvoices) such as InvoiceNumber, DateFrom, > DateTo. My problem is that an append/update query can't find the > values in the open Form (frmInvoices) when I specify them as; > > [Forms]![frmInvoices]![InvoiceNumber] > > a select query has no problem finding the field values on a form. > > please help. > > Aaron First off, if you are not always using all the parameters specified in your form, then you have to add parameters to your query on the fly. Also, you can't just do something like qdf.SQL = "SE...

'is not' or '!='
A newbie question to you; what is the difference between statements like: if x is not None: and if x != None: Without any context, which one should be preferred? IMHO, the latter is more readable. On 2014-08-18 21:35, ElChino wrote: > A newbie question to you; what is the difference between statements > like: > if x is not None: > and > if x != None: > > Without any context, which one should be preferred? > IMHO, the latter is more readable. > "x == y" tells you whether x and y refer to objects that are equal. "x is y" tells you whether x and y actually refer to the same object. In the case of singletons like None (there's only one None object), it's better to use "is". "ElChino" <elchino@cnn.cn>: > A newbie question to you; what is the difference between statements > like: > if x is not None: > and > if x != None: Do the following: take two $10 bills. Hold one bill in the left hand, hold the other bill in the right hand. Now, the bill in the left hand "is not" the bill in the right hand. However, the bill in the left hand "==" the bill in the right hand. > Without any context, which one should be preferred? > IMHO, the latter is more readable. In almost all cases, both tests would result in the same behavior. However, the "is not" test is conceptually the correct one since you want...

'^=' and '~='?
Hello, What is the difference between '^=' and '~='? Thanks, Duckhye ...

if str_mo not in ('','.') and str_da not in ('','.') and str_yy not in ('','.') Any shorter ?
Hi, there. =20 I'm just curious if it ever dawned on anybody how to abbreviate this line : if str_mo not in ('','.') and str_da not in ('','.') and str_yy not in ('','.')=20 =20 Igor Kurbeko Clinical Programmer Analyst 678 336 4328 ikurbeko@atherogenics.com =20 no brain no pain =20 how about: if not (str_mo in ('','.') or str_da in ('','.') or str_yy in ('','.')) OR if not (missing(str_mo) or missing(str_da) or missing(str_yy)) Eric On 22 Oct 03 21:13:37 GMT, ikurbeko@ATHER...

A function with 'and' , 'not' , 'null' , 'car' and 'cdr'
What's this ? (defun enigma (x) (and (not (null x)) (or (null (car x)) (enigma (cdr x))))) "I suppose I should learn Lisp, but it seems so foreign." - Paul Graham, Nov 1983 On Wed, Oct 07 2015, CAI GENGYANG wrote: > What's this ? > > > (defun enigma (x) > (and (not (null x)) > (or (null (car x)) > (enigma (cdr x))))) Bad taste? It returns T if the list X contains nil as an element. It would be clearer to write (some #'null x). Helmut CAI GENGYANG ...

In replies, using 'To:' as 'From:'
Hi, all. I have two email accounts: a personal one and a university-issued one. My university gives me the option of forwarding its incoming mail to my personal email account. I would like to do this to avoid having two separate Mutt configurations and checking two accounts, but the problem is that I want replies to appear from the correct account. That is, if I get an email to my university account and decide to reply, the From: header should show my university email address. Same for emails to my personal account. Ideally I can also choose the From: header of newly-composed messages without manually editing the header, but that's not necessary. Is this scenario possible with Mutt? Thank you. -- PGP key: http://www.qnan.org/~pmw/pgp/public.asc Philip M. White <pmw+news@qnan.org> wrote: > I have two email accounts: a personal one and a university-issued > one. {...} That is, if I get an email to my university account and > decide to reply, the From: header should show my university email > address. Same for emails to my personal account. See wiki-faq. > Ideally I can also choose the From: header of newly-composed > messages without manually editing the header, but that's not > necessary. See wiki, maybe in ConfigTricks. -- � Rado S. -- You must provide YOUR effort for your goal! EVERY effort counts: at least to show your attitude. You're responsible for ALL you do: you get what...

Placement of 'use', 'my'?
I've been placing 'use' statements as close as possible to the actual invocation of the module's subroutines, sometimes even placing them in a loop: #Hypothetical code... while (<>) { if (/^new_student\t(.*)$/) { use Student; my $student = new Student($1); } } The goal is to ensure that if I someday take that code out, the use statement is taken out as well. Is this a safe, efficient thing to do? As far as I can tell, the use statement is processed only once, at compile time. I haven't been following this placement philosophy with 'my' thus fa...

Why use '==' instead of '==='?
I have noticed that there are some on the news group here who prefer the use of '==' when it is known [by the coder] that both sides of the equation are strings. Example from one of David Mark's recent posts: >>if ( typeof selector === "string" ) { > > One equal sign too many, requiring the reader to pause and ponder what > the author's intentions were. Are they ignorant of the fact that the > resultof a typeof operation is a string (as is a string literal). I find it it just the reverse. I know exactly what the authors intent was ...

Re: if str_mo not in ('','.') and str_da not in ('','.') and str_yy not in ('','.') Any shorter ?
OR you could use ARRAY data new; set old; array igor $ (*) str_mo str_da str_yr; do over igor; if igor ~in (' ','.') then do; end; run; Prasad Ravi Igor Kurbeko <ikurbeko@ATHEROGENIC To: SAS-L@LISTSERV.UGA.EDU S.COM> cc: Sent by: "SAS(r) Subject: if str_mo not in ('','.') and str_da not in ('','.') and str_yy ...

When CANNOT use 'first'/'rest' in place of 'car'/'cdr'?
If I'm not mistaken, 'first' and 'rest' seem like modern user friendly replacements for 'car' and 'cdr'. Is it true that car and cdr are only in Common LISP to be able to run ancient LISP code? Is there any time I cannot use 'first' and 'rest' instead?/ Chris seberino@spawar.navy.mil wrote: > If I'm not mistaken, 'first' and 'rest' seem like modern user friendly > replacements for 'car' and 'cdr'. > > Is it true that car and cdr are only in Common LISP to be able > to run ancient LISP code? I use first and rest whenever those are the only ones I care about (or if I'm actually going to use second, third, etc). However, car and cdr won't be disappearing anytime soon simply because of their combinatory (?) abilities: cadr cddar .... I can just very quickly look at it and know what is going on. Jeff M. -- http://www.retrobyte.org mailto:massung@gmail.com seberino@spawar.navy.mil wrote: > If I'm not mistaken, 'first' and 'rest' seem like modern user friendly > replacements for 'car' and 'cdr'. > > Is it true that car and cdr are only in Common LISP to be able > to run ancient LISP code? > > Is there any time I cannot use 'first' and 'rest' instead?/ > > Chris > There shouldn't be anywhere that you _cannot_ use FIRST rather than CAR or REST rather than CDR. It's m...

difference between ',' and 'a,'
Small question. In gforth is there a difference between the words ',' and 'a,'? I'm thinking not, so perhaps another question, why have both ',' and 'a,'? Thanks Should be the same, in gforth: see , : , here cell allot ! ; ok see a, : , here cell allot ! ; ok On Friday, January 9, 2015 at 5:46:04 AM UTC-8, beeflo wrote: > Small question. In gforth is there a difference between the words ',' and 'a,'? > > I'm thinking not, so perhaps another question, why have both ',' and 'a,'...

logical to 'on' / 'off'
Hi, is there a function implemented doing this conversion? my Problem is, that I want to use the following code: set(handles.edit_curr_trq_sl,'Enable',get(hObject,'Value')) where get(hObject,'Value') gives the state of a checkbox thank you! function [str]=tf2oo(logic) switch logic case 0 str='off'; case 1 str='on'; end%switch end%function tf2oo() while i do not know a built in function, I use my own:) meisterbartsch wrote: > > > function [str]=tf2oo(logic) > switch logic > case 0 > str='off'; &g...

Difference between 'is' and '=='
Hey guys, this maybe a stupid question, but I can't seem to find the result anywhere online. When is the right time to use 'is' and when should we use '=='? Thanks alot~ mwql: >Hey guys, this maybe a stupid question, but I can't seem to find the >result anywhere online. When is the right time to use 'is' and when >should we use '=='? http://docs.python.org/ref/comparisons.html -- Ren� Pijlman mwql wrote: > Hey guys, this maybe a stupid question, but I can't seem to find the > result anywhere online. When is the right time to ...

Does '!=' equivelent to 'is not'
I'm a bit confusing about whether "is not" equivelent to "!=" if a != b: ... if a is not b: ... What's the difference between "is not" and "!=" or they are the same thing? pirata wrote: > I'm a bit confusing about whether "is not" equivelent to "!=" > > if a != b: > ... > > if a is not b: > ... > > > What's the difference between "is not" and "!=" or they are the same thing? No, they are not the same thing. == and != test to see if the *value* of two variables are the same. Like so: >>> a = 'hello world' >>> b = 'hello world' >>> a == b True a and b both have the value of 'hello world', so they are equal is and is not, however, do not test for value equivalence, they test for object identity. In other words, they test to see if the object the two variables reference are the same object in memory, like so: >>> a is b False a and b are assigned to two different objects that happen to have the same value, but nevertheless there are two separate 'hello world' objects in memory, and therefore you cannot say that a *is* b Now look at this: >>> c = d = 'hello world' >>> c == d True >>> c is d True In this case, they are again the same value, but now the is test also shows that they are the same *object* as well, because...

Override 'and' and 'or'
Is it possible to override 'and' and/or 'or'? I cannot find a special method for it... __and__ and __rand__ and __or__ and __ror__ are for binary manipulation... any proposals? Have marvelous sunday, Marco Dekker <m.aschwanden@gmail.com> wrote: > Is it possible to override 'and' and/or 'or'? I cannot find a special > method for it... __and__ and __rand__ and __or__ and __ror__ are for > binary manipulation... any proposals? If you want to customize the truth value testing you have to implement __nonzero__ " __nonzero__( self) Call...

'!' vs. '.'
Is there an advantage to using the '!' notation to represent form/ control relationships? (eg. Me!text1 vs Me.text1) I am currently using the '.' notation exclusively (for code completion in the VB Editor), but much of the high-quality code that I've seen (in Duane Hookom's Query-by-Form db, for example) uses the other. Here's one opinion for you: http://doc.advisor.com/doc/05352 robert.waters wrote: >Is there an advantage to using the '!' notation to represent form/ >control relationships? (eg. Me!text1 vs Me.text1) > >I am currently using the '.' notation exclusively (for code completion >in the VB Editor), but much of the high-quality code that I've seen >(in Duane Hookom's Query-by-Form db, for example) uses the other. -- HTH - RuralGuy (RG for short) acXP WinXP Pro Please post back to this forum so all may benefit. Message posted via AccessMonster.com http://www.accessmonster.com/Uwe/Forums.aspx/databases-ms-access/200704/1 Here's my $0.02 worth on this. I tend to copy the notation style and naming conventions that I see being used in the Help files. That would be Me![text1] for a control on a form. I am of the belief that this notation explicitly refers to a control itself rather than a field in the form's recordset. Here's an example: I have a parts inventory app that uses a "Line" code, which is usually a 3-character abbreviation for a brand name, and is the na...

Re: '^=' and '~='?
Duckhye, According to the doc ( http://xrl.us/befwjx ) they, and one other set of characters, and the mnemonic 'NE' all represent 'NOT EQUAL'. Art ------- On Wed, 11 Feb 2009 16:52:40 -0600, Duck-Hye Yang <dyang@CHAPINHALL.ORG> wrote: >Hello, >What is the difference between '^=' and '~='? > >Thanks, >Duckhye ...

Meaning of ':' and '{}'
Hi, Please, can anyone tell me what is meaning of predicates ':' and '{}' ? ---------------- yours Advait Advait wrote: > Hi, > Please, can anyone tell me what is meaning of predicates ':' and '{}' > ? It depends on the context. : is used for module qualification of predicates. Like lists:member(X,L) The curly brackets are used in Definite Clauses Grammars: find the section on DCGs in the manual or google for it and you will find out easily. There are uses of {} as a functor in datastructures also. Cheers Bart Demoen Hello everyone,...

'[OFF]' as in 'offensive'???
Hi, given that 'off-topicness' is indicated as '[OT]' and taking a look at those postings that started the threads indicated as '[OFF]' (which may both be seen as being somewhat offensive) may lead to the conclusion that '[OFF]' stands for offensiveness. I don't think that this is the intended meaning so what actually *does* '[OFF]' mean? I never came across that abbreviation before (although I have been around on the USENET for quite some time) but maybe it is worth knowing? Josef 'Jupp' Schugt NOTE: mails >100 KiB ...

Replacing ',' with '.'
Hello, I have a huge amount of numbers in a .txt file. The numbers are in the form 2,43252e+1. I need to replace the , with . How should I do this? I'd prefer some import method that does this during the import procedure. -Janne Hi, I guess you import the data as text and convert it then to numbers. Try 'strrep' before you convert the text to numbers. Tobias Jake the Snake schrieb: > Hello, > > I have a huge amount of numbers in a .txt file. The numbers are in the form 2,43252e+1. I need to replace the , with . How should I do this? I'd prefer some import method...

'a'..'z'
Is it possible to achieve something like this? switch (mystring.charAt(0)) { case 'a'..'z': // do something break; } "cruster" <cruster@gmail.com> wrote in message news:1151319731.988814.326200@m73g2000cwd.googlegroups.com... > Is it possible to achieve something like this? > > switch (mystring.charAt(0)) { > case 'a'..'z': > // do something > break; > } > There are times when an if statement may be more appropriate ;) Sorry - java is not VB :) -- LTP :) cruster schreef: > Is it possible to achieve somethi...

replacing '/' with '\\'
I have a MKS ksh shell script running on a Windows box. In some scripts I have to convert a UNIX filename into a DOS filename, that is replace the '/' with '\\'. For example, replace /opt/siips/archive/text.dat with \\opt\\siips\\archive\\text.dat. I've tried using sed like $FILE='echo $FILE|sed "s/\//\\\/g"' which got me \opt\siips\archive\text.dat. It's close but I still need the second \. Does anyone have any suggestion? Or tell me where I've gone wrong? Thanks -- Steffen On 9 Dec 2004 20:14:21 -0800, sajohn52@yahoo.com <sajohn52@yahoo....

replacement for '{' and '}' ?
I am still playing around with what kind of syntax I would like to mark up my documents. Are there equivalent long substitutes for { and } when they are not used to describe arguments to functions? Something like \begin{group} and \end{group}. In other words, if I could force myself to write, say, \begin{group} \it ... \end{group} instead of {\it ... }, then I believe I could identify from the markup context what is an argument that belongs to a just invoked macro and what is text. {Of course, in this context, \textit{...} would be better.} No more ambiguity whether a in \myfunction{a} i...

Diff between '{..}' and {'..'}
Hi, Could anyone tell me the difference between ......| awk '{.......}' AND ......| awk {'......'} And also when(in what situation) these are used? Thanks in advance, Anil. 2005-01-12, 22:37(-08), Anil: > Hi, > > Could anyone tell me the difference between > > .....| awk '{.......}' > > AND > > .....| awk {'......'} > > > And also when(in what situation) these are used? > Thanks in advance, [...] The second one should never be used. The difference is at the shell level, not at the awk level. '...' are stro...

Web resources about - phpMyAdmin - error 1045 - Access denied for user 'root'@'localhost' (using password: NO) - comp.databases.mysql

Resources last updated: 3/7/2016 7:44:29 PM