f



Install problems with Oracle installer 2.2 for Oracle 9i Client 9.2.0.1.0

Please forgive me if I am posting this in the wrong forum - I am an
Oracle Newbie.

Here are my computer specs :

Windows 2003 - fully patch from Microsoft as of Sept 4th 2004
HP LP2000r
1 x 1,1 Gig Intel processor
1 GB RAM
Hardware RAID 1, 12 GB with 8 GB freespace

Clean install, no other programs.

At first I tried running the Oracle installer program from the CD ROM
and came up with the error that it could not find the javaw.exe
program.  I then tried installing and reinstalling several versions of
java to no avail.  Next I searched through groups.google and found the
solution:

1.  Copy the Oracle CD to the hard drive.  I copied it to a subfolder
directly to C:\Oracle9i

2.  Change the file c:\oracle9i\install\ORAPARAM.INI to reflect the
actual name of the directories listed in the install directories of
the cd I just copied.  I did this and next took out some "."s and put
the absolute path to the java program and something called the
"OUI_LOCATION".

JRE_LOCATION=C:/oracle9i/stage/Components/oracleswdjre/13110a/1/DataFiles/Expanded
OUI_LOCATION=C:/oracle9i/stage/Components/oracleswdoui/220120/1/DataFiles/Expanded

Okay so good so far.  This time the installer actually started.

The problem occurs in the next few steps, when I click "next" (weiter
in German) from the welcome screen- please understand if I translate
something wrong here.

Then I am shown the installation directory screen, where I select the
default listed:

Source : C:\Oracle9i\STAGE\PRODUCTS.JAR
Target Name : OraHome92
Target Path : C:\oracle\ora92

I then click "Next" again.

The blue bar at the top shows the product list loads until it reaches
99%, then an error pops up saying something like

"During the loading of the library, an error has occured:
areas:Queries".

On this same box, I can then select "Stop the installation of all
products" or "Stop the installation of this komponent"

It doesn't matter which one I click- it then goes to the next screen
on which I can pick to install the administrator, running, or custom
setup.  Once I pick a setup option, the previous error repeats at each
component (it still doesn't matter what I select) until blue bar at
the top reaches 100%, then I am taken the screen with the path
selection so I can repeat the process all over again.

I read through some of the docs provided with the CD and found an
error log which oracle created in c:\program
files\oracle\inventory\logs\

"oraInstall03-09-2004_10-16-43.err"

java.io.IOException: The system cannot find the file specified
	at oracle.sysman.oii.oiix.OiixJarClassLoader.updateEntriesList(OiixJarClassLoader.java:263)
	at oracle.sysman.oii.oiix.OiixJarClassLoader.<init>(OiixJarClassLoader.java:209)
	at oracle.sysman.oii.oiix.OiixJarClassLoader.createLoader(OiixJarClassLoader.java:412)
	at oracle.sysman.oii.oiix.OiixJarClassLoader.createLoader(OiixJarClassLoader.java:431)
	at oracle.sysman.oii.oiix.OiixJarClassLoader.createLoader(OiixJarClassLoader.java:444)
	at oracle.sysman.oii.oiis.OiisLibraryLoader.loadLibrary(OiisLibraryLoader.java:161)
	at oracle.sysman.oii.oiis.OiisLibraryLoader.<init>(OiisLibraryLoader.java:103)
	at oracle.sysman.oii.oiis.OiisQueryLibLoader.<init>(OiisQueryLibLoader.java:41)
	at oracle.sysman.oii.oiic.OiicInstallSession.getLibLoader(OiicInstallSession.java:4637)
	at oracle.sysman.oii.oiic.OiicInstallSession.getQueryLibLoader(OiicInstallSession.java:4420)
	at oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:2215)
	at Components.oracle.swd.jre.v1_3_1_1_0a.CompContext.getCalculatedValueObject_PROD_HOME(Unknown
Source)
	at Components.oracle.swd.jre.v1_3_1_1_0a.CompContext.getCalculatedValueObject(Unknown
Source)
	at oracle.sysman.oii.oiis.OiisCompContext.getCalculatedValue(OiisCompContext.java:612)
	at oracle.sysman.oii.oiis.OiisProdHomeVar.getCalculatedValue(OiisProdHomeVar.java:199)
	at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:1353)
	at oracle.sysman.oii.oiis.OiisProdHomeVar.computeVarValue(OiisProdHomeVar.java:311)
	at oracle.sysman.oii.oiis.OiisCompInstallation.calculateProdHome(OiisCompInstallation.java:609)
	at oracle.sysman.oii.oiis.OiisCompInstallation.initContext(OiisCompInstallation.java:325)
	at oracle.sysman.oii.oiic.OiicInstallSession$CompInit.initComp(OiicInstallSession.java:1379)
	at oracle.sysman.oii.oiic.OiicInstallSession$CompInit.run(OiicInstallSession.java:1307)
	at java.lang.Thread.run(Unknown Source)
java.io.IOException: java.io.IOException: The system cannot find the
file specified
	at oracle.sysman.oii.oiis.OiisLibraryLoader.<init>(OiisLibraryLoader.java:113)
	at oracle.sysman.oii.oiis.OiisQueryLibLoader.<init>(OiisQueryLibLoader.java:41)
	at oracle.sysman.oii.oiic.OiicInstallSession.getLibLoader(OiicInstallSession.java:4637)
	at oracle.sysman.oii.oiic.OiicInstallSession.getQueryLibLoader(OiicInstallSession.java:4420)
	at oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:2215)
	at Components.oracle.swd.jre.v1_3_1_1_0a.CompContext.getCalculatedValueObject_PROD_HOME(Unknown
Source)
	at Components.oracle.swd.jre.v1_3_1_1_0a.CompContext.getCalculatedValueObject(Unknown
Source)
	at oracle.sysman.oii.oiis.OiisCompContext.getCalculatedValue(OiisCompContext.java:612)
	at oracle.sysman.oii.oiis.OiisProdHomeVar.getCalculatedValue(OiisProdHomeVar.java:199)
	at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:1353)
	at oracle.sysman.oii.oiis.OiisProdHomeVar.computeVarValue(OiisProdHomeVar.java:311)
	at oracle.sysman.oii.oiis.OiisCompInstallation.calculateProdHome(OiisCompInstallation.java:609)
	at oracle.sysman.oii.oiis.OiisCompInstallation.initContext(OiisCompInstallation.java:325)
	at oracle.sysman.oii.oiic.OiicInstallSession$CompInit.initComp(OiicInstallSession.java:1379)
	at oracle.sysman.oii.oiic.OiicInstallSession$CompInit.run(OiicInstallSession.java:1307)
	at java.lang.Thread.run(Unknown Source)
oracle.sysman.oii.oiif.oiifb.OiifbCancelException:
java.io.IOException: The system cannot find the file specified
	at oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:2316)
	at Components.oracle.swd.jre.v1_3_1_1_0a.CompContext.getCalculatedValueObject_PROD_HOME(Unknown
Source)
	at Components.oracle.swd.jre.v1_3_1_1_0a.CompContext.getCalculatedValueObject(Unknown
Source)
	at oracle.sysman.oii.oiis.OiisCompContext.getCalculatedValue(OiisCompContext.java:612)
	at oracle.sysman.oii.oiis.OiisProdHomeVar.getCalculatedValue(OiisProdHomeVar.java:199)
	at oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:1353)
	at oracle.sysman.oii.oiis.OiisProdHomeVar.computeVarValue(OiisProdHomeVar.java:311)
	at oracle.sysman.oii.oiis.OiisCompInstallation.calculateProdHome(OiisCompInstallation.java:609)
	at oracle.sysman.oii.oiis.OiisCompInstallation.initContext(OiisCompInstallation.java:325)
	at oracle.sysman.oii.oiic.OiicInstallSession$CompInit.initComp(OiicInstallSession.java:1379)
	at oracle.sysman.oii.oiic.OiicInstallSession$CompInit.run(OiicInstallSession.java:1307)
	at java.lang.Thread.run(Unknown Source)
java.io.IOException: java.io.IOException: The system cannot find the
file specified
	at oracle.sysman.oii.oiis.OiisCompInstallation.initContext(OiisCompInstallation.java:345)
	at oracle.sysman.oii.oiic.OiicInstallSession$CompInit.initComp(OiicInstallSession.java:1379)
	at oracle.sysman.oii.oiic.OiicInstallSession$CompInit.run(OiicInstallSession.java:1307)
	at java.lang.Thread.run(Unknown Source)

Also the content of this file,
"installActions03-09-2004_10-16-43.log", also found in this directory,
maybe of use too:

Umgebungsvariablen: 
	ORACLE_HOME = 
	PATH = C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\OraInstall2004-09-03_10-15-59AM\oui\bin\win32;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
	CLASSPATH = 
Der Benutzername lautet: Administrator
Liste der Standardverzeichnisse kann nicht aus dem Bestand gelesen
werden.
Version von Installer:2.2.0.12.0

Festlegen des Wertes f�r FROM_LOCATION zu
C:\Oracle9i\STAGE\PRODUCTS.JAR
Festlegen des Wertes f�r ORACLE_HOME_NAME zu OraHome92
Festlegen des Wertes f�r ORACLE_HOME zu C:\oracle\ora92
Festlegen des Wertes f�r SHOW_COMPONENT_LOCATIONS_PAGE zu true
Festlegen des Wertes f�r SHOW_CUSTOM_TREE_PAGE zu true
Festlegen des Wertes f�r SHOW_SUMMARY_PAGE zu true
Festlegen des Wertes f�r SHOW_INSTALL_PROGRESS_PAGE zu true
Festlegen des Wertes f�r SHOW_REQUIRED_CONFIG_TOOL_PAGE zu true
Festlegen des Wertes f�r SHOW_OPTIONAL_CONFIG_TOOL_PAGE zu true
Festlegen des Wertes f�r SHOW_RELEASE_NOTES zu true
Festlegen des Wertes f�r SHOW_END_SESSION_PAGE zu true
Festlegen des Wertes f�r SHOW_SPLASH_SCREEN zu true
Festlegen des Wertes f�r SHOW_WELCOME_PAGE zu true
Festlegen des Wertes f�r SHOW_ROOTSH_CONFIRMATION zu true
Festlegen des Wertes f�r SHOW_EXIT_CONFIRMATION zu true
Festlegen des Wertes f�r NEXT_SESSION zu true
Festlegen des Wertes f�r NEXT_SESSION_ON_FAIL zu true
Festlegen des Wertes f�r SHOW_DEINSTALL_CONFIRMATION zu true
Festlegen des Wertes f�r SHOW_DEINSTALL_PROGRESS zu true
Festlegen des Wertes f�r INVENTORY_LOCATION zu C:\Program
Files\Oracle\Inventory
Festlegen des Wertes f�r UNIX_GROUP_NAME zu  
Initialisieren der Bestandseinrichtung von WCCE
Ausf�hren eines Vorgangs zur Bestandseinrichtung von WCCE
Festlegen des Wertes f�r CLUSTER_NODES zu 

*** Cluster-Knotenauswahl Seite***
ClusterNodes = CLUSTER_NODES = 
Festlegen des Wertes f�r FROM_LOCATION zu
C:\Oracle9i\STAGE\PRODUCTS.JAR
Festlegen des Wertes f�r ORACLE_HOME zu C:\oracle\ora92
Festlegen des Wertes f�r ORACLE_HOME_NAME zu OraHome92

*** Dateiverzeichnisse Seite***
FromLocation = FROM_LOCATION = C:\Oracle9i\STAGE\PRODUCTS.JAR
ToLocation = ORACLE_HOME = C:\oracle\ora92
ToName = ORACLE_HOME_NAME = OraHome92
Initialisieren der Einrichtung f�r den Zugriff auf das
Installationsprogramm
Festlegen des Wertes f�r ORACLE_HOME zu C:\oracle\ora92
Festlegen des Wertes f�r ORACLE_HOME_KEY zu Software\ORACLE\HOME0
Festlegen des Wertes f�r ORACLE_HOME_FOLDER zu Oracle - OraHome92
Festlegen des Wertes f�r ORACLE_HOME_SERVICE zu OraHome92
Festlegen des Wertes f�r ToplevelComp zu oracle.client, 9.2.0.1.0,
>0.0.0.0.0, [ 912 ][OH:2]
Festlegen des Wertes f�r SELECTED_LANGUAGES zu [de, en]
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92\oracle.client
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_java_sqlj_sqljruntime
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.options.ano
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle.interMedia.imclient
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/oracle_java
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92\oracle.winprod
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/oracle_java_jdbc
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_options_olap_api
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.rdbms.sqlplus
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92\oracle.emcltprod
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.apache.isqlplus.ise
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_p2k_xmldevkit
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_install_instcommon
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.networking.netcltprod
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rdbms_oci_top
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/oracle_java_jdbc
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_utilities_util
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92\oracle.p2k
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_java_jdbc_thin11
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92\oracle.p2k.oledb
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.p2k.procob18
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rdbms_dbscripts
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle.interMedia.imclient
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/oracle_prod
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/Omwb
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_java_jdbc_oci12
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_options_ano_dce
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_utilities_util_common
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92in
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_p2k_xmldevkit
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_java_jdbc_thin14
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle.interMedia.imclient
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_java_jdbc_oci11
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle.interMedia.imclient
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracel_rdbms_sqlldr
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_options_ano_ssl
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rdbms_rman
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.utilities.perfmon
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rdbms_aqapi
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rdbms_occi
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle.interMedia.imclient
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/oracle_rdbms_nid
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92\oracle.mmc.admin
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.networking.netclt
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92\sysman
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.workflow.client
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rdbms_expimp
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.java.javavm.javatools
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/oracle_java_jdbc
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_java_jdbc_oci14
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.options.ano.sns
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92\oracle.rsf
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/oracle_rdbms_oci
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/oramts
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92\oracle.p2k.proc
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/oracle_prod
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/dbui
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_java_jdbc_thin12
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.p2k.procob
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/dcommon
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rdbms_expimp
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92\sysman
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rdbms_plsql
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92\sysman
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92\oracle.p2k.oo4o
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/Omwb
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/Omwb
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.sysman.prereq
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rsf_slax_rsf
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_xml_classgen_cplus
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rsf_plsql_rsf
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rdbms_xml_xsu
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_xml_parser_cplus
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_xml_classgen_java
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rsf_otrace_rsf
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/Omwb
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.xml.parser.java
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rsf_ldap_rsf_cmp
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_xml_parser_plsql
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/ewt
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_options_ano_ssl_owm
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.p2k.precomp_common
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.networking.netmgr
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/oracle_prod
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_xml_transview
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/oracle_xml_xsql
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rsf_precomp_rsf
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.mmc.primary
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rsf_platform_rsf
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/Omwb
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rsf_rdbms_rsf
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman/ocm
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_sysman_sqlserver
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_xml_transx
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/kodiak
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_java_jdbc_oci_common
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rsf_nlsrtl_rsf
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_workflow_builder
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/Omwb
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92\oracle.p2k.ott
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/Omwb
Festlegen des Wertes f�r PROD_HOME zu C:\Program
Files\Oracle\Inventory\..\jre\1.1.8
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rsf_dbjava_rsf
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rsf_net_rsf
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/Omwb
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.mmc.config
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rsf_rdbms_rsf
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.assistants.acf
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_java_jdbc_jdbc_common
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/jewt
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/Omwb
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rsf_clntsh_rsf_clntsh_rsf_cmp
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rsf_ssl_rsf
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/help
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman/expert
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rsf_agent_rsf_agent_rsf_cmp
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_workflow_mailer
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/Omwb
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_networking_netca
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_java_javavm_visiorb
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_xml_parser_c
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_tools_share
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_sysman_vmqshared
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_sysman_oembase_ela
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_olap_wrksht
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/classes/oracle/sysman/vif
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.emprod.oemagent.base_oemagent
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman/admin
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.networking.netmgr.emint
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/lib
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman/expert
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_workflow_common
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/help
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92\oracle.olap.cv
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/ice
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92\oracle.p2k.ifa
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.options.ops.opsca
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/oracle_bali_ohw
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_sysman_em_nls
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/oracle_bali_cabo
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/jle
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_tools_regexp
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/oracle_fonts
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92/sysman
Festlegen des Wertes f�r PROD_HOME zu C:\oracle\ora92\jdk

!!!!!This line below looks like where the problem occurs, but I am not
sure what to do about it . . . the folder ContentsXML was never
created . . .
C:/Program Files/Oracle/Inventory/ContentsXML/comps.xml kann nicht
gelesen


werden. Einige Bestandsinformationen k�nnten nicht mehr vorhanden
sein.
*** Fehler Dialogfeld: Beim Laden der Bibliothek ist ein Fehler
aufgetreten : areasQueries ***
Ausgew�hlter Benutzer: Installation aller Produkte stoppen.

Festlegen des Wertes f�r PROD_HOME zu C:\Program
Files\Oracle\Inventory\..\oui
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92\oracle.doc.windoc
Festlegen des Wertes f�r PROD_HOME zu
C:\oracle\ora92/oracle_rsf_oracore_rsf
Ausf�hren eines Vorgangs zur Einrichtung f�r den Zugriff auf das
Installationsprogramm

*** Verf�gbare Produkte Seite***
TopLevelComp = ToplevelComp = oracle.client, 9.2.0.1.0, >0.0.0.0.0, [
912 ][OH:2]
Festlegen des Wertes f�r ToplevelComp zu oracle.client, 9.2.0.1.0,
>0.0.0.0.0, [ 912 ][OH:2]
Warnung :*** Warnung: M�chten Sie wirklich beenden? ***
Ausgew�hlter Benutzer: Ja/OK


*** Installationsarten Seite***
DepMode = DEP_MODE = null
TLDepModes = TLDepModes = null
User Exit

Thanks if you get this far and I hope I provided enough information. 
Please help if you can!!!

Best regards,
MrMcFu
0
e_4_all (3)
9/3/2004 9:22:01 AM
comp.databases.oracle.server 22978 articles. 1 followers. Post Follow

5 Replies
1994 Views

Similar Articles

[PageSpeed] 40

On 3 Sep 2004 02:22:01 -0700, e_4_all@hotmail.com (MrMcFu) wrote:

>Please forgive me if I am posting this in the wrong forum - I am an
>Oracle Newbie.
>
>Here are my computer specs :
>
>Windows 2003 - fully patch from Microsoft as of Sept 4th 2004
>HP LP2000r
>1 x 1,1 Gig Intel processor
>1 GB RAM
>Hardware RAID 1, 12 GB with 8 GB freespace
>
>Clean install, no other programs.

Please verify whether 9.2.0.1 is actually certified for Win 2003. IIRC
there is a special edition of Oracle for win 2003.
I wonder why people still think they can upgrade their O/S without
verifying their own sw will still run on it.
MS has a very bad track record for building not downwards compatible
O/Ses


--
Sybrand Bakker, Senior Oracle DBA
0
sybrandb3529 (1188)
9/3/2004 10:03:22 PM
Sybrand Bakker <sybrandb@hccnet.nl> wrote in message news:<2dqhj0hv7ip4i3qs9vppres44ett83ffin@4ax.com>...

> Please verify whether 9.2.0.1 is actually certified for Win 2003. IIRC
> there is a special edition of Oracle for win 2003.

Thank you.  It seems there is another edition for windows 2003.  Our
departing Oracle person assured me it would work with windows 2003,
but obviously I should have double checked him.

> I wonder why people still think they can upgrade their O/S without
> verifying their own sw will still run on it.

If this was directed towards me, then it is entirely unhelpful.  It
wasn't an upgrade and the software never ran on the the machine to
begin with anyway.
0
e_4_all (3)
9/4/2004 5:54:39 AM
MrMcFu wrote:

> Sybrand Bakker <sybrandb@hccnet.nl> wrote in message
> news:<2dqhj0hv7ip4i3qs9vppres44ett83ffin@4ax.com>...
> 
>> Please verify whether 9.2.0.1 is actually certified for Win 2003. IIRC
>> there is a special edition of Oracle for win 2003.
> 
> Thank you.  It seems there is another edition for windows 2003.  Our
> departing Oracle person assured me it would work with windows 2003,
> but obviously I should have double checked him.

Odd. I had the 'normal Windows' freebie download 9i on Windows 2003 running
happily for many months, until I went all Linuxy. That would have been
9.2.0.1, as Daniel used to keep pointing out to me, prodding me to update.

I missed the start of the thread, btw, so I don't know what the issue was. I
just wanted to say that your departing Oracle person wasn't going
completely off his or her head. That 'normal' 9i *can* run on a W2003 box.
But that's not to say that, as you have discovered, there was/is a special
W2003 version as well.

Regards
HJR



> 
>> I wonder why people still think they can upgrade their O/S without
>> verifying their own sw will still run on it.
> 
> If this was directed towards me, then it is entirely unhelpful.  It
> wasn't an upgrade and the software never ran on the the machine to
> begin with anyway.

0
hjr (2065)
9/4/2004 6:01:07 AM
On 3 Sep 2004 22:54:39 -0700, e_4_all@hotmail.com (MrMcFu) wrote:

>Sybrand Bakker <sybrandb@hccnet.nl> wrote in message news:<2dqhj0hv7ip4i3qs9vppres44ett83ffin@4ax.com>...
>
>> Please verify whether 9.2.0.1 is actually certified for Win 2003. IIRC
>> there is a special edition of Oracle for win 2003.
>
>Thank you.  It seems there is another edition for windows 2003.  Our
>departing Oracle person assured me it would work with windows 2003,
>but obviously I should have double checked him.
>
>> I wonder why people still think they can upgrade their O/S without
>> verifying their own sw will still run on it.
>
>If this was directed towards me, then it is entirely unhelpful.  It
>wasn't an upgrade and the software never ran on the the machine to
>begin with anyway.

It wasn't directed at you. There have been too many posters here who
ran some edition of Oracle on NT or Win2k, and then have upgraded to
W2k, or XP, without even verifying Oracle certifies their version
against the new O/S. There has been NT4 sp3 coming with Winsock2,
incompatible with Winsock1, making all off Sqlnet useless, and Oracle
was forced to patch their software.


--
Sybrand Bakker, Senior Oracle DBA
0
sybrandb3529 (1188)
9/4/2004 6:05:13 AM
Thanks for your help again.  Just to wrap everything up, I went to
this URL -

http://www.oracle.com/technology/software/products/oracle9i/htdocs/win2k3soft.html

and then downloaded the two files.  After unzipping them, I read
through the .PDF file and downloaded the rest of the oracle
software/patches it told me to.  Everything seems fine, just another
case of RTFM.

Sybrand Bakker <sybrandb@hccnet.nl> wrote in message news:<9kmij0p3nrvm3otg1ari2ud2m5nmsmb58d@4ax.com>...
> On 3 Sep 2004 22:54:39 -0700, e_4_all@hotmail.com (MrMcFu) wrote:
> 
> >Sybrand Bakker <sybrandb@hccnet.nl> wrote in message news:<2dqhj0hv7ip4i3qs9vppres44ett83ffin@4ax.com>...
> >
> >> Please verify whether 9.2.0.1 is actually certified for Win 2003. IIRC
> >> there is a special edition of Oracle for win 2003.
> >
> >Thank you.  It seems there is another edition for windows 2003.  Our
> >departing Oracle person assured me it would work with windows 2003,
> >but obviously I should have double checked him.
> >
> >> I wonder why people still think they can upgrade their O/S without
> >> verifying their own sw will still run on it.
> >
> >If this was directed towards me, then it is entirely unhelpful.  It
> >wasn't an upgrade and the software never ran on the the machine to
> >begin with anyway.
> 
> It wasn't directed at you. There have been too many posters here who
> ran some edition of Oracle on NT or Win2k, and then have upgraded to
> W2k, or XP, without even verifying Oracle certifies their version
> against the new O/S. There has been NT4 sp3 coming with Winsock2,
> incompatible with Winsock1, making all off Sqlnet useless, and Oracle
> was forced to patch their software.
0
e_4_all (3)
9/7/2004 12:36:16 PM
Reply:

Similar Artilces:

Oracle server 9.2.0.1.0, Client 9.2.0.4.0, Red Hat Linux enterprise advanced server 2.1
Hi Everybody, My Database server is running on Red Hat Linux enterprise advanced server 2.1, And my Oracle version is 9.2.0.1.0. My Client mechine also Red Hat Linux enterprise advanced server 2.1 , Oracle client version is 9.2.0.4.0. I am running a web application. Our application is in Magic edeveloper. I connect to Oracle using oracle gateway to my application. My Problem is my application is is becoming slow. I am not able to trace where the problem is. Before our application was running fine. recently i upgraded Oracle client version to 9.2.0.4.0. My Oracle client & server versions are different. I am getting error on my client mechine, it showing all memory address on the screen and the part of error is, arg register addr=83498cc .... Dump of memory from 0x83988c to 0x83499cc .... -- End of Call stack trace -- I am not able to trace where the problem is.Any insight please... Thanks, Ssreddy. ...

Upgrade from Oracle 9.2.0.1 to Oracle 9.2.0.3
Hello All, I am trying to upgrade oracle 9.2.0.1 to new patchset 9.2.0.3 or 9.2.0.4. Please recommend which is better 9.2.0.3 or 9.2.0.4? Also I had a bad experience with my development server when applying 9.2.0.3 patchset. Is there anything you recommend before I start again? Thanks Kumu Hello Kumu, What is the reason for upgrade? Any specific bugs or issues you experience? You can open TAR as well to get support recommendations for your situation. New patches can introduce new problems as you can see, Regards, Ron DBA Infopower http://www.dbainfopower.com Standard disclaimer: http://www.dbainfopower.com/dbaip_advice_disclaimer.html "kumu" <forlist2001@yahoo.com> wrote in message news:a44abd39.0402161837.6badb9ed@posting.google.com... > Hello All, > I am trying to upgrade oracle 9.2.0.1 to new patchset 9.2.0.3 or > 9.2.0.4. Please recommend which is better 9.2.0.3 or 9.2.0.4? > > Also I had a bad experience with my development server when applying > 9.2.0.3 patchset. Is there anything you recommend before I start > again? > > Thanks > Kumu "Ron" <support@dbainfopower.com> wrote in message news:<QqWdnRM_cMiwWqzdRVn-vg@comcast.com>... > Hello Kumu, > > What is the reason for upgrade? Any specific bugs or issues you > experience? > > You can open TAR as well to get support recommendations for your > situation. > > New patches can introduce new...

help:How can i take Export of Oracle 9.2.0.1 from Oracle 9.2.0.7
How can i take Export of Oracle 9.2.0.1 from Oracle 9.2.0.7 1-what scripts are to be used 2-Where i can find these scripts. Thnks. You can't. You can use lower version export to export higher version database. The other way around has never been possible. -- Sybrand Bakker Senior Oracle DBA You probably have Oracle 9.2.0.1 running somewhere right, perhaps on another machine ? Set your ORACLE_HOME to 9.2.0.1 then export through sqlnet: exp username/pwd @9207instance Now you'll use the 9.2.0.1 export utility; this should work. "shahsyed" <shahsyed@gmail.com> schreef in bericht . > How can i take Export of Oracle 9.2.0.1 from Oracle 9.2.0.7 > > 1-what scripts are to be used > 2-Where i can find these scripts. > > Thnks. Hi, I guess oracle dosen't support backword comatibilty.then how it is possible?? Thanks Alok. On 9 Aug 2005 22:05:49 -0700, alok.behria@gmail.com wrote: >Hi, > > I guess oracle dosen't support backword comatibilty.then how it is >possible?? > >Thanks >Alok. Oracle is backwards compatible provided you have the definition of backwards compatible correct. You can connect (again) *lower version client* to a *higher version database* The other way around has nothing to do with backwards compatible, though it usually works, *with the exception of export/import, AS DOCUMENTED* (but I guess no one ever reads the docs) -- Sybrand Bakker, Senior Oracle DBA Hi, ...

upgrade from oracle 9.2.0.1.0 to 9.2.0.5.0
Hi, I have a 9.2.0.1.0 database that I want to upgrade to 9.2.0.5. for window version 32 bits, does anyone can provide the node document information of step by step doing it. many thanks leehi leehi wrote: > I have a 9.2.0.1.0 database that I want to upgrade to 9.2.0.5. for > window version 32 bits, Windows NT4? W2k? W2K3? W2K3 - Release 2? Why stop ot 9.2.0.5? > does anyone can provide the node document information of step by step > doing it. leehi wrote: > Hi, > > I have a 9.2.0.1.0 database that I want to upgrade to 9.2.0.5. for > window version 32 bits, > > does anyone can provide the node document information of step by step > doing it. > > many thanks > > leehi Go to metalink.oracle.com (registration and Oracle support CSI required). Click on Patches and Updates tab. Wait for the whole screen to load. Use one of the search functions to find your patch (note the Quick Links if you are getting something common, like 9206 or 9207). When you finally get to your patch download, click on the readme (the piece-of-paper icon next to the download icon). Read all the instructions. It's a good idea to read the instructions every time you do it, even (or perhaps especially) when you are comfortable doing it. The readme is usually also included with the patch. Download and unzip the patch. Look at what is there in the patch, perhaps there are additional release notes. Look around on metalink for addition...

Problem installing Oracle Designer 9.0.2.0.1
Hi everyone, I installed Oracle Database 9.2.0.1.0 on Windows 2000. Now I m trying to install Designer 9.0.2.0.1 but I m getting a message at the beginning of installation and the message is : Dependencies: Oracle 9iAS cannot be installed into an existing Oracle 9.2.0.1.0 or higher Oracle Home. If somebody help I will be really appreciate it. -- Haji Syed, Hassan On Mon, 08 Dec 2003 03:18:13 GMT, "hajisyed" <hajisyed@rogers.com> wrote: >Hi everyone, > >I installed Oracle Database 9.2.0.1.0 on Windows 2000. Now I m trying to >install Designer 9.0.2.0.1 but I m getting a message at the beginning of >installation and the message is : > >Dependencies: >Oracle 9iAS cannot be installed into an existing Oracle 9.2.0.1.0 or higher >Oracle Home. > >If somebody help I will be really appreciate it. You should have installed Designer first. And you need to install Designer in a *different* Oracle home, which can be accomplished by changing Oracle home in the installer. -- Sybrand Bakker, Senior Oracle DBA ...

update Oracle from 10.2.0.2.0 to 10.2.0.2.0
Where can I get the software for 10g 10.2.0.2.0. for Windows XP 32 bit. Thank you very much. "keekee" <moongeegee@gmail.com> a �crit dans le message de news: f3b21ed0-12fd-4812-b9da-60cf59d508b9@i9g2000yqi.googlegroups.com... | Where can I get the software for 10g 10.2.0.2.0. for Windows XP 32 | bit. | Thank you very much. On Metalink (My Oracle Support). https://support.oracle.com/CSP/ui/flash.html Regards Michel ...

Oracle 9i (9.2.0.1.0) Install link errors
Greetings: I'm trying to install Oracle 9i Enterprise Server and Client on a 64 bit Solaris 8 machine. I encountering link errors as follows: Calling action unixActions2.2.0.6.0 make installMakePath = /usr/ccs/bin/make installMakeFileName = /opt/oracle/product/9.2.0.1.0/network/lib/ins_net_client.mk installTarget = ntcontab.o installArguments = ORACLE_HOME=/opt/oracle/product/9.2.0.1.0, undoMakeFileName = null undoTarget = null undoArguments = null logFile = /opt/oracle/product/9.2.0.1.0/install/make.log Exception thrown from action: make Exception Name: MakefileException Exception String: Error in invoking target ntcontab.o of makefile /opt/oracle/pr oduct/9.2.0.1.0/network/lib/ins_net_client.mk Exception Severity: 1 This was while the OUI was trying to execute the following make command: /usr/ccs/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/opt/oracle/product/9.2.0.1.0 I can actucally manully execute this on the command line and it seems to work but I'm sure not properly since I'm sure there are some paths that it needs which would have normaly been set in the install script. I believe I have something not set properly prior to starting the Oracle Universal Installer but I'm not sure what (i.e., environment variable, or compiler option). Any advice would be appreciated. Cheers! On Thu, 04 Dec 2003 18:59:29 GMT, "Joseph Dimech" <joe@tsc-corp.com> wrote: &...

Problems installing 10.2.0.2 patchset to a 10.2.0.1 database
I am trying to install the latest patchset to my 10gR2 database. When i double click on setup.exe nothing visable happens. The process is launched and according to Windows Task manager is taking up 50% of my CPU. The process just sits there spinning away and nothing happens. I have shutdown, using Service Control Manager, all Oracle services including databases, listeners and DBConsoles Any ideas? <kevin.aide@intergraph.com> schreef in bericht news:1159977988.501508.164590@b28g2000cwb.googlegroups.com... >I am trying to install the latest patchset to my 10gR2 database. When > i double click on setup.exe nothing visable happens. The process is > launched and according to Windows Task manager is taking up 50% of my > CPU. The process just sits there spinning away and nothing happens. > > I have shutdown, using Service Control Manager, all Oracle services > including databases, listeners and DBConsoles > > Any ideas? > Sometimes it helps when you do not use the setup.exe in the root of your installation, but the one in the install directory. Reboot before patching might help too. Has to do with conflicting javaw.exe versions or something like that. You're not on VMWare, are you? Robbert van der Hoorn OSA it BV The Netherlands Robbert, I only have one setup.exe and there is no install directory. At the top level I have a stage directory and three html files and the setup.exe. I am not using VMWare and I have tried reb...

oracle 9i (9.2.0.1.0)
Hi! when I call the oracle performance manager I get the following errors: VTM-0002: error when displaying graph java.lang.null.pointerexception at oracle.sysman.vtd.VtdCartridge.lookupClass(VtdCartridge.java:1313) ..... what is my problem? Thanks! ...

Connection from Oracle Developer Suite 10g 9.0.4.0.1 to Oracle DB 10g Release 10.1.0.2.0
Hi, I have installed Oracle DB 10g Release 10.1.0.2.0 on Windows XP. START->ALL PROGS->oracle-OraDb10g_home3 Location of TNSNAMES FILE: C:\oracle\product\10.1.0\db_3\NETWORK\ADMIN\TNSNAMES.ORA with two alias: 1)ORCL3 2) EXTPROC_CONNECTION_DATA I can logon to database via SQL*PLUS and I can log on to EM on the web as well using ORCL3. After that I installed Oracle Developer Suite 10g 9.0.4.0.1 to my the same computer. During installation it was not allowing me to install this suite to the same ORACLE home. I installed this in the following home: START->ALL PROGS->...

massive performance drop Oracle 9i on multi processor system (Windows Server 2003, Oracle 9i, 9.2.0.6.0)
The performance of some complex PL/SQL functions has dropped dramatically since migrating from Oracle 8i (8.1.7.0.0) on Windows Server 2000 to 9i (9.2.0.6.0) on Windows Server 2003. We found out, that Oracle 9i performance on a multi processor CPU machine (our server has 4 XEON CPUs, Hyperthreading is disabled in BIOS) is highly dependent on init.ora parameters; unfortunately our trial and error approach to find the proper settings (we searched Oracle Tech Net (OTN) and google groups without success) did not help so far. We are testing performance behaviour with some business critical PL/SQL procedures that do authorization calculations for our application. Simplified these functions do a lot of inserts, deletes and selects in/from tables (being used as temp tables in lack of in memory temp table support of oracle 9i). We can monitor the progress within the stored procedure by using UTL_FILE functions to write a log file into the file system of the server; we real time monitor the log file using "tail -f". <PL/SQL do something> UnbufferedLogFileOutputUsingUTL_FILE(); <PL/SQL do something> UnbufferedLogFileOutputUsingUTL_FILE(); [...] When setting "CPU_COUNT = 1" in init.ora the function will typically run up to 10 seconds, when setting "CPU_COUNT = 4" it will take more than 2 minutes (!!!) We experimented with the following other parameters so far: db_writer_processes (set to 4 in combination with cpu_count = 4) fast_start_parall...

Oracle 9.2.0.1.0 Install Fail On Win2k
I am attempting to install Oracle 9i (9.2.0.1.0) onto my machine running Windows 2000 Professional which, according to Oracle, is a supported configuration. After selecting my installation type, the installer fails with the following error message: "The procedure entry point SetHandleContext could not be located in the dynamic link library KERNEL32.DLL". From searching the web, I have found comments suggesting that SetHandleContext no longer exists in KERNEL32.DLL on Windows 2000. Is the 9i installer perhaps thinking that I am running NT ? Help in this regard would be greatly appreciated. We are running Oracle 9204 EE on win2k adv. We never had any issue with the installation and running oracle on win2k. In fact, as you pointed out, the problem is to find information on various issues on windows. Oracle will work perfectly on windows but it requires a little self trainning. Keep searching. "StephenMatthews" <steveandemma@matthews2002.freeserve.co.uk> wrote in message news:<bod8c2$ion$1@news7.svr.pol.co.uk>... > I am attempting to install Oracle 9i (9.2.0.1.0) onto my machine running > Windows 2000 Professional which, according to Oracle, is a supported > configuration. After selecting my installation type, the installer fails > with the following error message: "The procedure entry point > SetHandleContext could not be located in the dynamic link library > KERNEL32.DLL". From searching the web, I have foun...

Problem installing Oracle client 10.2.0.1
Hi All, I am trying to install oracle client 10.2.0.1 on Solaris 9. Installation completes with success but i have porblems with privileges for all the directories under Oracle Home. instead of having 755 or drwxr-xr--x for all the directories and sub directories under Oracle Home most of them have drwxr-x---. which essentially means no one other than oracle can do much. any ideas what I have missed to end up with this problem? has any one else encounter it?I can change the permission manually but i want to find out what may have caused it. thanks for all the help in advance. Faraz Comments embedded. On Jan 29, 10:00=A0am, Faraz <sarfarazla...@gmail.com> wrote: > Hi All, > I am trying to install oracle client 10.2.0.1 on Solaris 9. > Installation completes with success So your attempts succeeded. > but i have porblems with > privileges for all the directories under Oracle Home. =A0 This is standard for Oracle 10.2 and later releases; the security for these products has been tightened considerably compared to earlier releases. > instead of > having 755 or drwxr-xr--x for all the directories and sub directories > under Oracle Home most of them have drwxr-x---. which essentially > means no one other than oracle can do much. As intended. > any ideas what I have missed to end up with this problem? =A0 Nothing. This is the way Oracle 10.2.0.x installs. > has any one > else encounter it? Everyone who installs 10.2.0.x or later...

Installation of Oracle 9.2.0.1.0 hangs at linking stage...
Hi Friends, I am trying to install Oracle 9.2.0.1. on Solaris 5.10 Installation fails during linking process at 61% & doesnt move ahead. When I abort the the installation & try to run relink all it hangs at the same process. I am installing 9.2.0.1.0 on Sun solaris (sparc - 64 bit). As there any patch is to be apply at Solaris level or any specific parameter for Solaris 10. Thanks in advance. SofDev wrote: > Hi Friends, > > I am trying to install Oracle 9.2.0.1. on Solaris 5.10 > Installation fails during linking process at 61% & doesnt move ahead. > When I abort the the installation & try to run relink all it hangs at > the same process. I am installing 9.2.0.1.0 on Sun solaris (sparc - 64 > bit). As there any patch is to be apply at Solaris level or any > specific parameter for Solaris 10. > > Thanks in advance. Somewhere in the instalation notes there should be a reference to a url with any additional updates for your platform. I would look for this url and check it. I would also double check my OS settings, especially configured swap space, verse the recommended settings listed in the installation manual. HTH -- Mark D Powell -- ...

Setting file permission error on Oracle 9.2 installation on RedHat 9.0 #2
Hi, On installing Oracle 9.2 on RedHat 9.0 and AS 2.1, I encounterd the same following error: Error in setting permissions on file/directory /opt/oracle/jre/1.1.8/LICENSE Could someone tell me why it happened and how to fix it? Your help is much appreciated. Thanks, Rob ...

problem with dbca on Oracle 9i R2 9.2.0.1.0 Linux
When I want to start dbca on my installation I get Java errors below: System is a RH 2.1 AS. $ dbca Exception in thread "main" java.lang.NullPointerException at oracle.sysman.assistants.util.NetworkUtils.getOneLocalListenerProtocolAddress(NetworkUtils.java:1897) at oracle.sysman.assistants.util.NetworkUtils.getOneLocalListenerProtocolAddress(NetworkUtils.java:1962) at oracle.sysman.assistants.util.NetworkUtils.getOneLocalListenerProtocolAddress(NetworkUtils.java:1954) at oracle.sysman.assistants.util.NetworkUtils.getOneLocalListenerProtocolAddress(NetworkUtils.java:1946) at oracle.sysman.assistants.util.NetworkUtils.getOneLocalListenerProtocolAddress(NetworkUtils.java:1863) at oracle.sysman.assistants.util.NetworkUtils.getLocalListenerAddress(NetworkUtils.java:736) at oracle.sysman.assistants.util.NetworkUtils.getLocalListenerAddresses(NetworkUtils.java:774) at oracle.sysman.assistants.util.NetworkUtils.needLocalListener(NetworkUtils.java:712) at oracle.sysman.assistants.util.step.StepContext.setListenersToUpdate(StepContext.java:485) at oracle.sysman.assistants.util.step.StepContext.<init>(StepContext.java:139) at oracle.sysman.assistants.dbca.backend.Host.<init>(Host.java:454) at oracle.sysman.assistants.dbca.ui.UIHost.<init>(UIHost.java:185) at oracle.sysman.assistants.dbca.ui.InteractiveHost.<init>(InteractiveHost....

Oracle 9.2 vs. Oracle 9.2.0.4.
I'm using SDK 1.4.2_03 either with an Oracle 9.2 or an Oracle 9.2.0.4 client version. The 9.2 version behaves as expected. My problem only occurs with the 9.2.0.4. version. If I try to process the ResultSet of database query and the selected column data includes leading blanks, the 9.2.0.4 seems to trim these leading blanks. Is this behaviour known or am I doing something wrong ? <code snippet> ResultSet result = null; Connection con = null; Statement stmt = null; Vector vec = new Vector(); try { con = DriverManager.getConnection(dbUrl, dbUser, dbPassword); stmt = con.createStatement(); result = stmt.executeQuery("SELECT DATA FROM CPTMESSAGEDATA";); while (result.next()) { vec.add(result.getString("DATA")); } con.close(); stmt.close(); } catch (SQLException e) { } </code snippet> CPTMessageData.DATA is of type VARCHAR2(50) not nullable with values like: " @20013 @E123 @G123 @ @ @ " " @3700167 @43186 @B50_300 @1 @20013 @1 @OK " Any help is appreciated. Alex ...

[Oracle] Oracle9i Release 2 (9.2.0.7) installators
Hi! I have Oracle9i Release 2 (9.2.0.4), but I must install or upgrade to version 9.2.0.7. Where I can find these instalators or patch? These is not produtions server - I can reinstall it. On Jan 13, 6:16=A0am, "Karol" <n...@mail.com> wrote: > Hi! > I have Oracle9i Release 2 (9.2.0.4), but I must install or upgrade to > version 9.2.0.7. > Where I can find these instalators or patch? These is not produtions > server - I can reinstall it. 1. oracle questions like this could go to an oracle group. comp.databases.oracle.server seems right for this one. (...

Oracle 9.2.0.1 installation on Solaris 9
Hello all, I have installed 'enterprise editon' of 64-bit Oracle 9i(9.2.0.1) on a solaris 9 machine. I use the library(libclntst9.a) from this installation to link my OCI code. But I am facing symbol referencing errors as follows: ------- kolacbktab /mainline/libraries/oracle/solaris/lib64/libclntst9.a(kola.o) kpupftv7 /mainline/libraries/oracle/solaris/lib64/libclntst9.a(ttcdrv.o) kgupntb /mainline/libraries/oracle/solaris/lib64/libclntst9.a(kgupi.o) slxlobc /mainline/libraries/oracle/solaris/lib64/libclntst9.a(lxinitc.o) slxlobj /mainline/libraries/oracle/solaris/lib64/libclntst9.a(lxinitc.o) kpupft /mainline/libraries/oracle/solaris/lib64/libclntst9.a(kpuini.o) lpmiftfs /mainline/libraries/oracle/solaris/lib64/libclntst9.a(lpmpgif.o) ncrov /mainline/libraries/oracle/solaris/lib64/libclntst9.a(kgupn.o) ldxpmxa /mainline/libraries/oracle/solaris/lib64/libclntst9.a(ldxsti.o) slxlcbk /mainline/libraries/oracle/solaris/lib64/libclntst9.a(lxinitc.o) kpudft /mainline/libraries/oracle/solaris/lib64/libclntst9.a(kpuini.o) lxsftb /mainline/libraries/oracle/solaris/lib64/libclntst9.a(lxocmpst.o) ld: fatal: Symbol referencing errors. No output written to .... ------- This code used to work fine when I was using Oracle 8.1.7 with libclntst8.a While trying to look for solutions I observed that another machine which also has Oracle 9.2.0.1 installed has a libclntst9.a with a larger size. If I use the library from this second machine the OCI code compiles without errors The on...

Problem Installing Oracle 9.2.0.1 on AIX 5.3 ML03
I am having problems installing Oracle 9.2 on AIX 5.3 ML03 I have installed the 28 fixes for the IY76140 - CHILD PROCESS UNABLE TO LOAD A MODULE (bos.sysmgt.nim.master.5.3.0.40.bff & devices.vdevice.hvterm-protocol.rte.5.3.0.40.bff didnt install cos the prequisites werent installed). Basically what is happening is the server is hanging before exporting anything to the desktop, due to the following error: $ The Java RunTime Environment was not found at /tmp/ OraInstall2007-03-12_08-50-28PM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run. Please visit http://www.javasoft....

Problem Installing Oracle 9.2.0.1 on AIX 5.3 ML03
I am having problems installing Oracle 9.2 on AIX 5.3 ML03 I have installed the 28 fixes for the IY76140 - CHILD PROCESS UNABLE TO LOAD A MODULE (bos.sysmgt.nim.master.5.3.0.40.bff & devices.vdevice.hvterm-protocol.rte.5.3.0.40.bff didnt install cos the prequisites werent installed). Basically what is happening is the server is hanging before exporting anything to the desktop, due to the following error: $ The Java RunTime Environment was not found at /tmp/ OraInstall2007-03-12_08-50-28PM/jre/bin/java. Hence, the Oracle Universal Installer cannot be run. Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again. : No such file or directory When i look in the /tmp/Ora* directory there is no jre folder. I have java installed at /usr/java131 and /usr/java5 - I have tried with each of these available from the path. B On 12 Mar 2007 10:04:49 -0700, "bomahony" <bomahony@gmail.com> wrote: >I am having problems installing Oracle 9.2 on AIX 5.3 ML03 > >I have installed the 28 fixes for the IY76140 - CHILD PROCESS UNABLE >TO LOAD A MODULE (bos.sysmgt.nim.master.5.3.0.40.bff & >devices.vdevice.hvterm-protocol.rte.5.3.0.40.bff didnt install cos the >prequisites werent installed). > >Basically what is happening is the server is hanging before exporting >anything to the desktop, due to the following error: >$ The Java RunTime Environment was not found at /tmp/ >OraInstall2007-03-12_08-50-28PM/j...

unable to install oracle 9.2.0.1 Java problem on FreeBSD 4.7
Hi, I use FreeBSD 4.7 and I try to intall oracle for personnal use, but when I try to start the installation I always have the same error message. su-2.04$ Initializing Java Virtual Machine from /tmp/OraInstall2003-01-11_06-34-36AM/jre/bin/java. Please wait... # # HotSpot Virtual Machine Error, Internal Error # Please report this error at # http://java.sun.com/cgi-bin/bugreport.cgi # # Error ID: 4F533F4C494E55580E43505002B9 # # Problematic Thread: I install a lot on java package from the port ... I try with linux_base 6 or 7 and I always have the same error, I follow all the instruction from the FreeBSD.org web site. I'm using gnome2-2.0_4. Where's the problem, Do I forget to install a java port ? Thx u S. "Frank" <fbortel@home.nl> wrote in message news:3E23280F.4060202@home.nl... > Seb wrote: > > Hi, > > > > I use FreeBSD 4.7 and I try to intall oracle for personnal use, but when > > I try to start the installation I always have the same error message. > > > > su-2.04$ Initializing Java Virtual Machine from > > /tmp/OraInstall2003-01-11_06-34-36AM/jre/bin/java. Please wait... > > # > > # HotSpot Virtual Machine Error, Internal Error > > # Please report this error at > > # http://java.sun.com/cgi-bin/bugreport.cgi > > # > > # Error ID: 4F533F4C494E55580E43505002B9 > > # > > # Problematic Thread: > > > > ...

Oracle 9i Release 2(9.2.0.4) on Slackware 10.1
Does anybody out there have had these experience in performing such an installation ... does anybody have a how-to ... or some hints ... ??? Please help me with this issue. || So many thanks in advance, looking forward to hear from you guys .. !! Oralinuxdba wrote: > Does anybody out there have had these experience in performing such an > installation ... does anybody have a how-to ... or some hints ... ??? > Please help me with this issue. || So many thanks in advance, looking > forward to hear from you guys .. !! > Issue? What issue? The issue of using a non-oracle-supported OS is easily addressed: switch to White Box Linux. -- Regards, Frank van Bortel What's "White Box Linux" .... ?? Oralinuxdba wrote: > What's "White Box Linux" .... ?? > What's slackware? I know shareware, hardware, vapourware, software, courseware,... -- Regards, Frank van Bortel White Box Linux is: " forked from the source code for Red Hat's _Red Hat Enterprise Linux_" See: http://www.whiteboxlinux.org/ and remember ... Google is you friend for "What is" questions...... Oralinuxdba wrote: > What's "White Box Linux" .... ?? What's google.com? Apparently this is some inane American game show? -- Daniel A. Morgan University of Washington damorgan@x.washington.edu (replace 'x' with 'u' to respond) DA Morgan wrote: > Oralinuxdba wrote: > >> What's "Whi...

Which OS patches to install on HP-UX 11i (11.11) for Oracle 9i R2 (9.2.0.4.0)?
Hi! I'd like to install Oracle 9iR2 (9.2.0.4.0) on a HP-UX 11.11 machine. Which operating system patches should I install? The documentation at <http://oracleheva1.oracle.com/docs/html/A96167_01/pre.htm#sthref108> only lists 11.00 patches. Sept. 2001 Quality Pack, PHCO_23792, PHCO_24148, PHKL_24268, PHKL_24729, PHKL_ 25475, PHKL_25525, PHNE_24715, PHSS_23670, PHSS_24301, PHSS_24303, PHSS_24627, PHSS_22868 Is there somewhere a more recent listing? Thanks a lot, Alexander Skwar -- He that bringeth a present, findeth the door open. -- Scottish proverb. You can install the latest gold maintenance patch from hp and you should be all set. hpuxrac <johnbhurley@sbcglobal.net>: > You can install the latest gold maintenance patch from hp and you > should be all set. Thanks! In the meantime, I found Doc ID: Note:169706.1 Subject: Oracle RDBMS on AIX,HP-UX,Solaris,Tru64,Linux,MacOSX: Versions, Sizes, Requirements Quick Reference And installed, what was listed there: PHCO_24402 s/b PHCO_25569 PHCO_28427 s/b PHCO_29029 s/b PHCO_31903 PHKL_25506 PHNE_27745 s/b PHNE_30580 (For RAC systems) PHNE_28568 s/b PHNE_30378 PHSS_26560 s/b PHSS_30966 PHSS_26946 PHSS_28849 Alexander Skwar -- The older a man gets, the farther he had to walk to school as a boy. ...

Web resources about - Install problems with Oracle installer 2.2 for Oracle 9i Client 9.2.0.1.0 - comp.databases.oracle.server

Installer Institute - Car Audio Installation and Mobile Electronics Education
The Installer Institute is a school for car audio installation training offering MESA certification. The leader in Mobile Electronics Installation ...

Windows Installer - Wikipedia, the free encyclopedia
) is a software component used for the installation, maintenance, and removal of software on modern Microsoft Windows systems. The installation ...

Alarm.com MobileTech Tool for Installers on the App Store on iTunes
Get Alarm.com MobileTech Tool for Installers on the App Store. See screenshots and ratings, and read customer reviews.

Solar Installers San Diego - 619-831-8786 - Call Today - YouTube
Would you like to get solar panels installed in your home or business? The search is over. We are highly qualified and local solar panel contractors ...

Australia's solar installers face another boom and bust
Solar energy installers are expecting a boom then sharp contraction of their businesses as the Abbott government prepares to take an axe to renewable ...

VKMusic4 - Apple Macs Get Malicious Fake Installer Trojan Virus
Apple computers are now the target of a fake installer that tacks hidden fees onto mobile phone account bills.

Kevin Rudd 'deeply sorry' for the deaths of insulation installers
UPDATE 4.40pm: PRIME Minister Kevin Rudd says he is deeply sorry about the deaths of installers working on the Federal Government's home insulation ...

Image Editor GIMP Abandons SourceForge Over Adware-Wrapped Installers
... software decides it no longer wants anything to do with you. This... The tipping point was the introduction of their own SourceForge Installer ...

Home insulation scheme crippled by dodgy installers: Greg Combet
Former climate change minister Greg Combet faced unscrupulous installers trying to defraud the government even as he was trying to wind down ...

Lloyd Rayney phone-tapping trial: Fingerprints on roof manhole match alleged installer of bugging equipment ...
Two fingerprints on a manhole cover from the home of Lloyd Rayney match those of the man he is alleged to have paid to install phone-bugging ...

Resources last updated: 3/20/2016 6:47:56 AM