f



Newbie: ORa 9.2.0.1 on Linux SUSE 8.2 Install causes Errors

Hi all,
while Installing ORACLE 9.2.0.1 EE on a SUSE Linux 8.2 Env I had some
strange errors:
Can anyone give me hints working this around ?

-error while make on ctx-cartridge install
I'm using Glibc 2.3.2
should i apply some patches ?
a part of the make.log

****************************************************************************
****************
mv -f /opt/oracle/bin/ctxsrv /opt/oracle/bin/ctxsrvO
mv ctxsrv  /opt/oracle/bin/ctxsrv
chmod 751 /opt/oracle/bin/ctxsrv
gcc -o
ctxhx -L/opt/oracle/ctx/lib/ -L/opt/oracle/lib/ -L/opt/oracle/lib/stubs/
/opt/oracle/ctx/lib/ctxhx.o -L/opt/oracle/ctx/lib/ -lm -lsc_ca -lsc_fa -lsc_
ex -lsc_da -lsc_ut -lsc_ch -lsc_fi -lctxhx -lc -Wl,-rpath,/opt/oracle/ctx/li
b -lnls9  -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9
/lib/libdl.so.2: undefined reference to `__ctype_b_loc@GLIBC_2.3'
/lib/libdl.so.2: undefined reference to `_dl_addr@GLIBC_PRIVATE'
/lib/libdl.so.2: undefined reference to `_dl_open@GLIBC_PRIVATE'
/lib/libdl.so.2: undefined reference to `_dl_close@GLIBC_PRIVATE'
/lib/libdl.so.2: undefined reference to `_dl_sym@GLIBC_PRIVATE'
/lib/libdl.so.2: undefined reference to `_dl_vsym@GLIBC_PRIVATE'
collect2: ld returned 1 exit status
make: *** [ctxhx]
****************************************************************************
*****************
-Error while calling database configuration assistent:

SIGSEGV   11*  segmentation violation
 stackbase=0x45447000, stackpointer=0x45446d5c

Full thread dump:
    "Image Fetcher 0" (TID:0x411dd288, sys_thread_t:0x45488e0c, state:R)
prio=5
    "AWT-Motif" (TID:0x411d4e50, sys_thread_t:0x45467e0c, state:R) prio=5
    "AWT-Input" (TID:0x411d4e30, sys_thread_t:0x45446e0c, state:R) prio=5
*current thread*
    "AWT-EventQueue-0" (TID:0x411d4da0, sys_thread_t:0x4540fe0c, state:CW)
prio=5
 java.lang.Object.wait(Object.java)
 java.awt.EventQueue.getNextEvent(EventQueue.java:126)
 java.awt.EventDispatchThread.run(EventDispatchThread.java:70)
    "Finalizer thread" (TID:0x411b2210, sys_thread_t:0x444d3e0c, state:R)
prio=1
    "Async Garbage Collector" (TID:0x411b2258, sys_thread_t:0x444b2e0c,
state:R) prio=1
    "Idle thread" (TID:0x411b22a0, sys_thread_t:0x44491e0c, state:R) prio=0
    "Clock" (TID:0x411b2088, sys_thread_t:0x44470e0c, state:CW) prio=12
    "main" (TID:0x411b20b0, sys_thread_t:0x8230ff0, state:CW) prio=5
 java.lang.Object.wait(Object.java)
 oracle.ewt.graphics.ImageLoader.waitFor(Unknown Source)
 oracle.ewt.graphics.ImageUtils.loadImage(Unknown Source)
 oracle.ewt.graphics.ImageUtils._getImageResource(Unknown Source)
 oracle.ewt.graphics.ImageUtils.getImageResource(Unknown Source)
 oracle.sysman.assistants.dbca.ui.ProgressOnlyHost.<init>(ProgressOnlyHost.j
ava:94)
 oracle.sysman.assistants.dbca.Dbca.getHost(Dbca.java:137)
 oracle.sysman.assistants.dbca.Dbca.execute(Dbca.java:85)
 oracle.sysman.assistants.dbca.Dbca.main(Dbca.java:161)
Monitor Cache Dump:
    oracle.ewt.graphics.ImageLoader@1092473408/1093187904: <unowned>
 Waiting to be notified:
     "main" (0x8230ff0)
    java.awt.EventQueue@1092439496/1093048216: <unowned>
 Waiting to be notified:
     "AWT-EventQueue-0" (0x4540fe0c)
Registered Monitor Dump:
    Thread queue lock: <unowned>
    Name and type hash table lock: <unowned>
    String intern lock: <unowned>
    JNI pinning lock: <unowned>
    JNI global reference lock: <unowned>
    BinClass lock: <unowned>
    Class loading lock: <unowned>
    Java stack lock: <unowned>
    Code rewrite lock: <unowned>
    Heap lock: <unowned>
    Has finalization queue lock: <unowned>
    Finalize me queue lock: <unowned>
    Dynamic loading lock: <unowned>
    Monitor IO lock: <unowned>
    Child death monitor: <unowned>
    Event monitor: <unowned>
    I/O monitor: <unowned>
    Alarm monitor: <unowned>
 Waiting to be notified:
     "Clock" (0x44470e0c)
    Monitor registry: owner "AWT-Input" (0x45446e0c, 1 entry)
Thread Alarm Q:
/opt/oracle/bin/dbca: line 124: 12746 Get�tet
$JRE_DIR/bin/jre -DORACLE_HOME=$OH -DJDBC_PROTOCOL=thin -mx64m -classpath
$CLASSPATH oracle.sysman.assistants.dbca.Dbca $ARGUMENTS

thank you spending your time
regards
Franz Langner
franz.langner@gmx.de



0
10/16/2003 12:28:48 PM
comp.databases.oracle.server 22978 articles. 1 followers. Post Follow

1 Replies
453 Views

Similar Articles

[PageSpeed] 16

Hi

Have a look at

http://linux.oreillynet.com/lpt/a/4141

maybe it helps

Lars

0
10/17/2003 3:35:26 PM
Reply:

Similar Artilces:

Oracle server 9.2.0.1.0, Client 9.2.0.4.0, Red Hat Linux enterprise advanced server 2.1
Hi Everybody, My Database server is running on Red Hat Linux enterprise advanced server 2.1, And my Oracle version is 9.2.0.1.0. My Client mechine also Red Hat Linux enterprise advanced server 2.1 , Oracle client version is 9.2.0.4.0. I am running a web application. Our application is in Magic edeveloper. I connect to Oracle using oracle gateway to my application. My Problem is my application is is becoming slow. I am not able to trace where the problem is. Before our application was running fine. recently i upgraded Oracle client version to 9.2.0.4.0. My Oracle client & server versions are different. I am getting error on my client mechine, it showing all memory address on the screen and the part of error is, arg register addr=83498cc .... Dump of memory from 0x83988c to 0x83499cc .... -- End of Call stack trace -- I am not able to trace where the problem is.Any insight please... Thanks, Ssreddy. ...

Install problems with Oracle installer 2.2 for Oracle 9i Client 9.2.0.1.0
Please forgive me if I am posting this in the wrong forum - I am an Oracle Newbie. Here are my computer specs : Windows 2003 - fully patch from Microsoft as of Sept 4th 2004 HP LP2000r 1 x 1,1 Gig Intel processor 1 GB RAM Hardware RAID 1, 12 GB with 8 GB freespace Clean install, no other programs. At first I tried running the Oracle installer program from the CD ROM and came up with the error that it could not find the javaw.exe program. I then tried installing and reinstalling several versions of java to no avail. Next I searched through groups.google and found the solution: 1. Copy the Oracle CD to the hard drive. I copied it to a subfolder directly to C:\Oracle9i 2. Change the file c:\oracle9i\install\ORAPARAM.INI to reflect the actual name of the directories listed in the install directories of the cd I just copied. I did this and next took out some "."s and put the absolute path to the java program and something called the "OUI_LOCATION". JRE_LOCATION=C:/oracle9i/stage/Components/oracleswdjre/13110a/1/DataFiles/Expanded OUI_LOCATION=C:/oracle9i/stage/Components/oracleswdoui/220120/1/DataFiles/Expanded Okay so good so far. This time the installer actually started. The problem occurs in the next few steps, when I click "next" (weiter in German) from the welcome screen- please understand if I translate something wrong here. Then I am shown the installation directory screen, where I select the default listed: Source : C:\Oracle...

Installing patchset 9.2.0.8 on 9.2.0.1 error
The following running services need to be shutdown before continuing: Automatic Updates Background Intelligent Transfer Server COM+ Event System Cryptographic Services DCOM Server Process Launcher DHCP Client DNS Client Distributed Link Tracking Client Error Reporting Service Help and Support Messenger Network Connections Network Location Awareness(NLA) Remote Access Connection Manager Remote Procedure Call (RPC) Remote Registry Secondary Logon Server Shell Hardware Detection System Event Notification System Restore Service TCP/IP NetBIOS Helper Task Scheduler Telephony Terminal Services Themes WebClient Windows Audio Windows Management Instrumentation Windows Time Wireless Zero Configuration Workstation What should I do, while installing patchset 9.2.0.8 on WINDOWS XP, I am getting above error. "peter" <hhh.database@gmail.com> schreef in bericht news:1168424525.937552.232840@k58g2000hse.googlegroups.com... > The following running services need to be shutdown before continuing: > > Automatic Updates > Background Intelligent Transfer Server > COM+ Event System > Cryptographic Services > DCOM Server Process Launcher > DHCP Client > DNS Client > Distributed Link Tracking Client > Error Reporting Service > Help and Support > Messenger > Network Connections > Network Location Awareness(NLA) > Remote Access Connection Manager > Remote Procedure Call (RPC) > Remote Registry > Secondary Logon > Server ...

Linux: Oracle9i DB 9.2, Oracle9i DS 9.0.2, Oracle9i AS 1.0.2.2.1(Forms, Reports) on Fedora Core 1
I have installed with Philippe ALEXANDRE on a laptop Oracle9i DB 9.2, Oracle9i DS 9.0.2, Oracle9i AS 1.0.2.2.1(Forms6i, Reports6i) on Fedora Core 1 the 8th November 2003. All is running OK. Denis ALEXANDRE Assistant Manager, Banque Saradar France http://www.alexnet.fr/ P.S. I am using Oracle and Unix to create an Integrated Banking System since 1987. This banking system is installed in more than 25 other banks. ...

Oracle Warehouse Builder 9.2.0.2.8 and Workflow 2.6.2 on linux
Hi there, I downloaded OWB_9.2.0.2.8_linux.tar.gz from here: http://otn.oracle.com/software/products/warehouse/index.html In the above download I found OWB installation documentation. In the OWB installation documentation, I see evidence that Oracle Warehouse Builder (runtime portion) makes use of "Oracle Workflow". It does not mention a version though. It does say that Workflow is neccessary. The documentation for Workflow was easy to find here: http://otn.oracle.com/pls/db92/db92.docindex?remark=homepage#index-WOR I'm not sure where to find the Workflow software though. The documentation for Workflow suggests that it is installed via OUI rather than a simple unzip (as used by JDeveloper for example). In http://metalink.oracle.com, I found evidence that Workflow is not a standalone product but that it is bundled with other products. I also found evidence that it lives in a directory named "ofw" once it is installed. I did not find mention of workflow in any of the download areas so I'm curious if any of you have installed it and if yes, where did you get it? I hate to be a whiner, but OWB product mgt has dropped the ball here. I spent a day setting up my OWB POC environment and here I am near the end of the installation and I can't find a critical piece of software and the OWB installation documentation gives no clue where to get the software or if it even has a part number. The same can be said for the Workflow software. Do th...

Upgrade from Oracle 9.2.0.1 to Oracle 9.2.0.3
Hello All, I am trying to upgrade oracle 9.2.0.1 to new patchset 9.2.0.3 or 9.2.0.4. Please recommend which is better 9.2.0.3 or 9.2.0.4? Also I had a bad experience with my development server when applying 9.2.0.3 patchset. Is there anything you recommend before I start again? Thanks Kumu Hello Kumu, What is the reason for upgrade? Any specific bugs or issues you experience? You can open TAR as well to get support recommendations for your situation. New patches can introduce new problems as you can see, Regards, Ron DBA Infopower http://www.dbainfopower.com Standard disclaimer: http://www.dbainfopower.com/dbaip_advice_disclaimer.html "kumu" <forlist2001@yahoo.com> wrote in message news:a44abd39.0402161837.6badb9ed@posting.google.com... > Hello All, > I am trying to upgrade oracle 9.2.0.1 to new patchset 9.2.0.3 or > 9.2.0.4. Please recommend which is better 9.2.0.3 or 9.2.0.4? > > Also I had a bad experience with my development server when applying > 9.2.0.3 patchset. Is there anything you recommend before I start > again? > > Thanks > Kumu "Ron" <support@dbainfopower.com> wrote in message news:<QqWdnRM_cMiwWqzdRVn-vg@comcast.com>... > Hello Kumu, > > What is the reason for upgrade? Any specific bugs or issues you > experience? > > You can open TAR as well to get support recommendations for your > situation. > > New patches can introduce new...

upgrade from oracle 9.2.0.1.0 to 9.2.0.5.0
Hi, I have a 9.2.0.1.0 database that I want to upgrade to 9.2.0.5. for window version 32 bits, does anyone can provide the node document information of step by step doing it. many thanks leehi leehi wrote: > I have a 9.2.0.1.0 database that I want to upgrade to 9.2.0.5. for > window version 32 bits, Windows NT4? W2k? W2K3? W2K3 - Release 2? Why stop ot 9.2.0.5? > does anyone can provide the node document information of step by step > doing it. leehi wrote: > Hi, > > I have a 9.2.0.1.0 database that I want to upgrade to 9.2.0.5. for > window version 32 bits, > > does anyone can provide the node document information of step by step > doing it. > > many thanks > > leehi Go to metalink.oracle.com (registration and Oracle support CSI required). Click on Patches and Updates tab. Wait for the whole screen to load. Use one of the search functions to find your patch (note the Quick Links if you are getting something common, like 9206 or 9207). When you finally get to your patch download, click on the readme (the piece-of-paper icon next to the download icon). Read all the instructions. It's a good idea to read the instructions every time you do it, even (or perhaps especially) when you are comfortable doing it. The readme is usually also included with the patch. Download and unzip the patch. Look at what is there in the patch, perhaps there are additional release notes. Look around on metalink for addition...

[News] New Reviews of Tiny Core Linux 2.1, CDLinux 0.9.2, Live Linux Gaming 0.9.5, PCLinuxOS Minime 09.1
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Tiny Core Linux 2.1 ,----[ Quote ] | They say that good things come in small packages and so it is with Tiny Core | Linux, a diminutive but powerful distribution. TCL weighs in at an incredibly | petite 11MB when you download it. Yes, it really is that tiny. Tiny Core | Linux is based on Busybox, the Linux 2.6 kernel, JWM, Fltk and Tiny X. `---- http://desktoplinuxreviews.com/2009/07/01/tiny-core-linux-2-1/ CDLinux 0.9.2 Community Edition Review ,----[ Quote ] | Five weeks ago when I wrote an overview of Debris Linux I received a number | of requests to review other mini distributions from DistroWatch Weekly | readers. CDLinux is a minimalist distro from China which takes a different | approach to small. Rather than cram as many application as possible onto a | mini (3"/8cm) CD, the CDLinux Community Edition aims for excellent support of | half a dozen languages (Chinese, English, French, German, Japanese and | Russian), support for a wide variety of filesystems and excellent hardware | support, including CUPS and XSane for printers and scanners, all of which are | included in the 204MB iso. They also offer a "standard" edition, just 64MB in | size, which includes a basic Xfce desktop and almost no applications at all. | CDLinux "standard" does include popular rescue and admin tools, making it an | excellent choice for a recovery CD. Finally, the 25MB "mini" edition is | co...

Oracle9i DB 9.2, Oracle9i DS 9.0.2, Oracle9i AS 1.0.2.2.1(Forms, Reports) on Fedora Core 1
I have installed Oracle9i DB 9.2, Oracle9i DS 9.0.2, Oracle9i AS 1.0.2.2.1(Forms6i, Reports6i) on Fedora Core 1 the 8th November 2003. All is running OK. Denis ALEXANDRE Assistant Manager, Banque Saradar France http://www.alexnet.fr/ P.S. I am using Oracle and Unix to create an Integrated Banking System since 1987. This banking system is installed in more than 25 other banks. alex@alexnet.fr wrote: > I have installed > Oracle9i DB 9.2, Oracle9i DS 9.0.2, Oracle9i AS 1.0.2.2.1(Forms6i, Reports6i) > on Fedora Core 1 > the 8th November 2003. All is running OK. > > Denis ALEXANDRE > Assistant Manager, Banque Saradar France > http://www.alexnet.fr/ > > P.S. I am using Oracle and Unix to create an Integrated Banking System since 1987. > This banking system is installed in more than 25 other banks. > > Great - after this coming out in the open, do you care to explain how you installed Portal Rel 1 in a 9.2 instance? -- Regards, Frank van Bortel Frank wrote: > alex@alexnet.fr wrote: > >> I have installed >> Oracle9i DB 9.2, Oracle9i DS 9.0.2, Oracle9i AS 1.0.2.2.1(Forms6i, >> Reports6i) >> on Fedora Core 1 >> the 8th November 2003. All is running OK. >> >> Denis ALEXANDRE >> Assistant Manager, Banque Saradar France >> http://www.alexnet.fr/ >> >> P.S. I am using Oracle and Unix to create an Integrated Banking System >> since 1987. >...

help:How can i take Export of Oracle 9.2.0.1 from Oracle 9.2.0.7
How can i take Export of Oracle 9.2.0.1 from Oracle 9.2.0.7 1-what scripts are to be used 2-Where i can find these scripts. Thnks. You can't. You can use lower version export to export higher version database. The other way around has never been possible. -- Sybrand Bakker Senior Oracle DBA You probably have Oracle 9.2.0.1 running somewhere right, perhaps on another machine ? Set your ORACLE_HOME to 9.2.0.1 then export through sqlnet: exp username/pwd @9207instance Now you'll use the 9.2.0.1 export utility; this should work. "shahsyed" <shahsyed@gmail.com> schreef in bericht . > How can i take Export of Oracle 9.2.0.1 from Oracle 9.2.0.7 > > 1-what scripts are to be used > 2-Where i can find these scripts. > > Thnks. Hi, I guess oracle dosen't support backword comatibilty.then how it is possible?? Thanks Alok. On 9 Aug 2005 22:05:49 -0700, alok.behria@gmail.com wrote: >Hi, > > I guess oracle dosen't support backword comatibilty.then how it is >possible?? > >Thanks >Alok. Oracle is backwards compatible provided you have the definition of backwards compatible correct. You can connect (again) *lower version client* to a *higher version database* The other way around has nothing to do with backwards compatible, though it usually works, *with the exception of export/import, AS DOCUMENTED* (but I guess no one ever reads the docs) -- Sybrand Bakker, Senior Oracle DBA Hi, ...

Setting file permission error on Oracle 9.2 installation on RedHat 9.0 #2
Hi, On installing Oracle 9.2 on RedHat 9.0 and AS 2.1, I encounterd the same following error: Error in setting permissions on file/directory /opt/oracle/jre/1.1.8/LICENSE Could someone tell me why it happened and how to fix it? Your help is much appreciated. Thanks, Rob ...

optimizer_features_enable difference between 9.2.0.1/9..2.0.3/9.2.0.6?
Hi, All, I noticed for this parameter optimizer_features_enable , oracle document says: Syntax OPTIMIZER_FEATURES_ENABLE = {8.0.0 | 8.0.3 | 8.0.4 | 8.0.5 | 8.0.6 | 8.0.7 | 8.1.0 | 8.1.3 | 8.1.4 | 8.1.5 | 8.1.6 | 8.1.7 | 9.0.0 | 9.0.1 | 9.2.0} I noticed when I keep it default to 9.2.0 in init.ora, in version 9.2.0.3 and 9.2.0.5 with exact same database and exact same init.ora, oracle CBO did choose different plan. So there is some difference between 9.2.0.X versioin for the CBO. Where can we get such information about the difference? Thanks On 12 Jul 2005 23:37:28 -0700, "chao_ping" <zhuchao@gmail.com> wrote: > So there is some difference between 9.2.0.X versioin for the CBO. >Where can we get such information about the difference? Usually such things are outlined either in the release notes or in the new features documents. Documents that obviously no one reads. -- Sybrand Bakker, Senior Oracle DBA "chao_ping" <zhuchao@gmail.com> wrote in message news:1121236648.759298.79320@g44g2000cwa.googlegroups.com... > Hi, All, > I noticed for this parameter optimizer_features_enable , oracle > document says: > Syntax > OPTIMIZER_FEATURES_ENABLE = {8.0.0 | 8.0.3 | 8.0.4 | 8.0.5 | 8.0.6 | > 8.0.7 | 8.1.0 | 8.1.3 | 8.1.4 | 8.1.5 | 8.1.6 | 8.1.7 | 9.0.0 | 9.0.1 | > 9.2.0} > > > I noticed when I keep it default to 9.2.0 in init.ora, in version > 9.2.0.3 and 9.2.0.5 with exact same database and...

ORA-01571: redo version 9.2.0.0.0 incompatible with ORACLE version 8.1.7
Hye, While running an upgrade from 8.1.7 to 9.2.0.4 I finished the upgrade successfully I started the database and wanted to change undo tablespace management to be automatic So I offline the rollback segs, offline the tablespace that holds then and drop it. I want to create a new tablespace UNDO but I got the error the the parameter compatible is set to a lower value which is true because I have 8.1.7. I disconnect, delete the compatible entry from the file and want to log again. And here's the surprise ORA-01571: redo version 9.2.0.0.0 incompatible with ORACLE version 8.1.7 I have the database backed up so I can restore but I am hoping there is a way that will save me some time. What can I do to eliminate this error ? TIA Michal What do you mean you deleted the compatible parameter ... Did you not set it to a new proper value For example "compatible=9.2.0.0.0" Or is there a reason you would not want to change it - which do exist. It says oracle version is 8i...and redo version 9i. Are you starting the database under right environment? Sorry, I was a little too quick on my post. I should have though about the possibility that you could be using the new server parameter file, in which case you might have to execute the following -> alter system set compatible="9.2.0.0.0.0" scope=spfile; ...

Oracle 9i (9.2.0.1.0) Install link errors
Greetings: I'm trying to install Oracle 9i Enterprise Server and Client on a 64 bit Solaris 8 machine. I encountering link errors as follows: Calling action unixActions2.2.0.6.0 make installMakePath = /usr/ccs/bin/make installMakeFileName = /opt/oracle/product/9.2.0.1.0/network/lib/ins_net_client.mk installTarget = ntcontab.o installArguments = ORACLE_HOME=/opt/oracle/product/9.2.0.1.0, undoMakeFileName = null undoTarget = null undoArguments = null logFile = /opt/oracle/product/9.2.0.1.0/install/make.log Exception thrown from action: make Exception Name: MakefileException Exception String: Error in invoking target ntcontab.o of makefile /opt/oracle/pr oduct/9.2.0.1.0/network/lib/ins_net_client.mk Exception Severity: 1 This was while the OUI was trying to execute the following make command: /usr/ccs/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/opt/oracle/product/9.2.0.1.0 I can actucally manully execute this on the command line and it seems to work but I'm sure not properly since I'm sure there are some paths that it needs which would have normaly been set in the install script. I believe I have something not set properly prior to starting the Oracle Universal Installer but I'm not sure what (i.e., environment variable, or compiler option). Any advice would be appreciated. Cheers! On Thu, 04 Dec 2003 18:59:29 GMT, "Joseph Dimech" <joe@tsc-corp.com> wrote: &...

installing and running apache 2.0.46 / php5.0.0b1 / Suse Linux 8.2
I did the following as instructed in the docs. (see below) everything seemed to install ok and I started apache with no complaints, but, 1)I do not see a process for apache using ps -ef 2) In yast I see that the new apache2 version is installed but not php5, its still on php4 any ideas ?? 1. gzip -d httpd-2_0_NN.tar.gz 2. tar xvf httpd-2_0_NN.tar 3. gunzip php-NN.tar.gz 4. tar -xvf php-NN.tar 5. cd httpd-2_0_NN 6. ./configure --enable-so 7. make 8. make install Now you have Apache 2.0.NN available under /usr/local/apache2, configured with loadable module support and the sta...

problems creating database (suse 8.1 / orcl 9.2.0.1 )
Hello! I'm a newbee on linux and my english isn't so good but i Hope someone can help me My oracle installation on my Linux goes fine and the orcl-demo-Database was also running. because i've installed many instances on Win-NT systemes i want to create my own database on the Linux system. with the oracle-User i've done the following: I've edit the listener.ora and started the lsnrctrl. It seemed to be OK then on the console ORACLE_HOME=/home/oracle/OraHome1 ORACLE_SID=cs2 export ORACLE_HOME export ORACLE_SID /home/oracle/OraHome1/bin/orapwd file=/home/oracle/OraHome1/dbs/orapwdcs2.ora password=manager entries=5 this all seemed also OK then /home/oracle/OraHome1/bin/sqlplus /nolog @/home/oracle/scripts/cs2/create/CS2run.sql The lines of the Script which where processed: connect/ as sysdba startup nomount pfile="/home/oracle/OraHome1/dbs/initcs2.ora" ...... By the startup-line i get the following errors ORA-00444: background process "PMON" failed while starting ORA-07446: sdnfy: bad value '' for parameter . Is there anything missing in my procedure? The initcs2.ora is in a version which is running on a WIN-NT-System The File-pathes in the .ora are changed to the Linux-Pathes so! I hope someone have a tip for me. Greetings Ren� "Karsten Farrell" <kfarrell@belgariad.com> schrieb im Newsbeitrag news:ot2T9.1093$sD1.65003652@newssvr21.news.prodigy.com... > > $ cd $ORACLE_HOME/dbs > >...

Problems installing 10.2.0.2 patchset to a 10.2.0.1 database
I am trying to install the latest patchset to my 10gR2 database. When i double click on setup.exe nothing visable happens. The process is launched and according to Windows Task manager is taking up 50% of my CPU. The process just sits there spinning away and nothing happens. I have shutdown, using Service Control Manager, all Oracle services including databases, listeners and DBConsoles Any ideas? <kevin.aide@intergraph.com> schreef in bericht news:1159977988.501508.164590@b28g2000cwb.googlegroups.com... >I am trying to install the latest patchset to my 10gR2 database. When > i double click on setup.exe nothing visable happens. The process is > launched and according to Windows Task manager is taking up 50% of my > CPU. The process just sits there spinning away and nothing happens. > > I have shutdown, using Service Control Manager, all Oracle services > including databases, listeners and DBConsoles > > Any ideas? > Sometimes it helps when you do not use the setup.exe in the root of your installation, but the one in the install directory. Reboot before patching might help too. Has to do with conflicting javaw.exe versions or something like that. You're not on VMWare, are you? Robbert van der Hoorn OSA it BV The Netherlands Robbert, I only have one setup.exe and there is no install directory. At the top level I have a stage directory and three html files and the setup.exe. I am not using VMWare and I have tried reb...

LaTex equation numbering like 2.1, 2.2, also 2.0.1, 2.0,2, 2.1.1, etc
David Roach wrote: > Is there a simple command to have latex number > the equations by the section numbers automatically. > > David From the LaTeX Companion (what a wonderful book!) %%%%%%%%%%%%%%%%%%%%%% % number equations within sections % In preamble \makeatletter \@addtoreset{equation}{section} \makeatother \renewcommand{\theequation}{\thesection.\arabic{equation}} %%%%%%%%%%%%%%%%%%%%%% Numbers within sections...I use this all the time in articles. Even works with ******************* ******************* Brilliant. And then I got numbering within subsections by repeating and editing (not replacing), so I now have:- (Just after the documentClass command) \makeatletter \@addtoreset{equation}{section} \makeatother \renewcommand{\theequation}{\thesection.\arabic{equation}} \makeatletter \@addtoreset{equation}{subsection} \makeatother \renewcommand{\theequation}{\thesubsection.\arabic{equation}} Bob Bob Marlow schrieb: > David Roach wrote: > >> Is there a simple command to have latex number >> the equations by the section numbers automatically. >> >> David > > From the LaTeX Companion (what a wonderful book!) > > %%%%%%%%%%%%%%%%%%%%%% > > % number equations within sections > % In preamble > > \makeatletter > \@addtoreset{equation}{section} > \makeatother > \renewcommand{\theequation}{\thesection.\arabic{equation}} > > %%%%%%%%%%%%%%%%%%%%%% [more code] > Hi! I th...

Installing LabVIEW 8.2.1 with DAQmx 8.0 on Suse 10.3 for Linux.
We recently updated some of our machines to Opensuse 10.3.&nbsp; We have a set of instructions my advisor wrote that have been used for the installation of Labview 8.2.1, NIKAL 1.6, and DAQmx 8.0 on Opensuse 10.3.&nbsp; I thought I would post these instructions for anyone who may find them useful. &nbsp; NIKAL is now on version 1.7 and we have began to use that, but not as of the latest writing of these instructions.&nbsp; We have installed Labview 8.5 using these instructions as well, but they have not been modified for that either.&nbsp; I used these instructions to install Labview 8.5, NIKAL 1.7 and DAQmx base 3.1 on a laptop since we needed USB support for an NI 9233.&nbsp; It installed without problems. I changed the following:On step 10 the version of NIKAL was 1.7 not 1.6.On step 11. I installed DAQmx Base 1.3 instead of DAQmx 8.0&nbsp; and the message concerning Labview 8.0 not being installed does not occur.Steps 13 and 14 should not be necessary since the versions DAQmx Base and Labview presumably expect each other to be there.Once I had everything installed on the laptop, Labview could not see my device.&nbsp; I contacted NI and they were very helpful and suggested a few commands to run.&nbsp; Here is what I did.I ran "lsdaq" with the following output:&gt; --------------------------------&gt;&gt; Detecting National Instruments DAQ Devices&gt;&gt; Found the following DAQ Devices:&gt;&gt; NI US...

Connecting to 8.1.7 Database from Developer Suite 10.1.2.0.2, also have 10g Client R2 installed.
Hi, Can anyone help, I install the 10g Client R2 ( 10.2.0.1.0 ), this lets me logon to our 8.1.7.0.0 Oracle Database server without any issues, from TOAD, SQLWorksheet SQLPLUS etc, I then downloaded and in stall the ORACLE Developer Suite 10.1.2.0.2, but can't get any of the development software forms/reports etc to connect to the 8.1.7.0.0 database, all the other stuff above still works as it uses the 10.2 Client path. Is there anyway to make the Developer Suite use the 10.2 client path for it's connectivity/middleware stuff, or do I need to do something else to the developer suite ?? Regards, Sean. <seancwatson@googlemail.com> schreef in bericht news:1159966104.761991.287140@k70g2000cwa.googlegroups.com... > Hi, > > Can anyone help, > > I install the 10g Client R2 ( 10.2.0.1.0 ), this lets me logon to > our 8.1.7.0.0 Oracle Database server without any issues, from TOAD, > SQLWorksheet SQLPLUS etc, > > I then downloaded and in stall the ORACLE Developer Suite 10.1.2.0.2, > but can't get any of the development software forms/reports etc to > connect to the 8.1.7.0.0 > database, all the other stuff above still works as it uses the 10.2 > Client path. > > Is there anyway to make the Developer Suite use the 10.2 client path > for it's connectivity/middleware stuff, or do I need to do something > else to the developer suite ?? > > Regards, > Sean. > Exactly what part of Dev. Sui...

Oracle 9.2 and Suse linux 8.2 (sqlplus segfault)
Hello! I have a big problem. I installed the Oracle 9.2 on the Suse Linux 8.2 (not enterprise) and after succesfully instalation, I can't run sqlplus. When I try to connect to database (created by dbca) i got the exception segmentation fault (core dumped). What's wrong? The Linux configuration: gcc 2.95.3 kernel 2.4.20 all settings are set as described in manual. Best regards "Mr Bodek" <bodek_wr@poczta.onet.pl> wrote in message news:booaat$hh1$1@news.onet.pl... > Hello! > I have a big problem. I installed the Oracle 9.2 on the Suse Linux 8.2 (not > enterprise) > and after succesfully instalation, I can't run sqlplus. When I try to > connect to database > (created by dbca) i got the exception segmentation fault (core dumped). > What's wrong? > The Linux configuration: > gcc 2.95.3 > kernel 2.4.20 > all settings are set as described in manual. I realise that SuSe is not Red Hat or Mandrake, but you will find two white papers on installing onto those two other distros at my site at www.dizwell.com. And I've had several emails from SuSe users saying they found them useful and helped them identify which bits they'd missed. Regards HJR Mr Bodek wrote: > Hello! > I have a big problem. I installed the Oracle 9.2 on the Suse Linux 8.2 (not > enterprise) > and after succesfully instalation, I can't run sqlplus. When I try to > connect to database > (created by dbca) i got the ...

Oracle 9.2 and Suse linux 8.2 (sqlplus segfault)
Hello! I have a big problem. I installed the Oracle 9.2 on the Suse Linux 8.2 (not enterprise) and after succesfully instalation, I can't run sqlplus. When I try to connect to database (created by dbca) i got the exception segmentation fault (core dumped). What's wrong? The Linux configuration: gcc 2.95.3 kernel 2.4.20 all settings are set as described in manual. Best regards In 8.0 I had to do unset LANG Mr Bodek wrote: > Hello! > I have a big problem. I installed the Oracle 9.2 on the Suse Linux 8.2 > (not enterprise) > and after succesfully instalation, I can't run sqlplus. When I try to > connect to database > (created by dbca) i got the exception segmentation fault (core dumped). > What's wrong? > The Linux configuration: > gcc 2.95.3 > kernel 2.4.20 > all settings are set as described in manual. > > > > Best regards "Mr Bodek" <bodek_wr@poczta.onet.pl> wrote i > I have a big problem. I installed the Oracle 9.2 on the Suse Linux 8.2 (not > enterprise) > and after succesfully instalation, I can't run sqlplus. When I try to > connect to database > (created by dbca) i got the exception segmentation fault (core dumped). > What's wrong? > The Linux configuration: > gcc 2.95.3 > kernel 2.4.20 > all settings are set as described in manual. Go to $ORACLE_HOME/bin and try relinking the network, clien...

Moving a single instance 9.2.0.7 database to a clustered 9.2.0.6 database environment #2
HI, I have the following situation: We have Veritas cluster setup , and there are 2 solaris servers on which VCS is set up. On this set up we have about 8 databases all of which are 9.2.0.6 version. Now we have one stand alone solaris server, and it has a 9.2.0.7 database. This database is for a third party application -Clear Case & Clear Quest. Now it is required to move the single instance database to clustered environment. Since in the clustered environment we have 9.2.0.6 version, is it AT ALL POSSIBLE to move this database, which is 9.2.0.7 to that enviroment? I guess not, and in that case, what are the options? - since this is a packaged application , so should be contact the vendor and ask them whether we can downgrade the database to 9.2.0.6? - is that a valid option? Are there other options? (upgrading the existing 9.2.0.6 database to make all of them 9.2.0.7 is not allowed.) With thanks, Nirav ...

does oracle support more than one CPU for SuSE Linux 9.1 or 9.2 or 9.3 Professional Linux
We have some performance Problems due to heavy load in an oracle database 10g. Our Server is Hewlett Packard Proliant ML380 OS: SuSE Linux Professional 9.1. We have one Processor installed and 4 Gigabyte RAM. Would it help to install another Processor increasing the performance? Does Oracle support really 2 Processor Systems? What could be the expected gain? regards Maximilian "max" <maximilian.gablinger@swisscom.com> wrote in news:1115910573.88791@ftpgate: > We have some performance Problems due to heavy load in an oracle > database 10g. > Our Server is Hewlett Packard Proliant ML380 OS: SuSE Linux > Professional 9.1. > We have one Processor installed and 4 Gigabyte RAM. > Would it help to install another Processor increasing the performance? It depends > Does Oracle support really 2 Processor Systems? Yes > What could be the expected gain? It depends max wrote: > We have some performance Problems due to heavy load in an oracle database > 10g. > Our Server is Hewlett Packard Proliant ML380 OS: SuSE Linux Professional > 9.1. This is not a supported configuration, you may want to switch to SUSE SLES9 in order to get better HP/Oracle/SUSE support. Please do not crosspost. Kind regards, -- Cris Carampa (cris119@operamail.com) What if what you do to survive Kills the things you love Fear's a dangerous thing max wrote: > We have some performance Problems due to heavy load in an orac...

Web resources about - Newbie: ORa 9.2.0.1 on Linux SUSE 8.2 Install causes Errors - comp.databases.oracle.server

Resources last updated: 3/20/2016 8:56:41 AM