Cisco 1605 - How to restore default settings? 2 211 (7/18/2003 11:05:56 AM)
I hope someone will be able to help me. I have a 1605 router that I have managed to completely mess-up. I have a limited knowledge of the device and the old saying holds true. I was attempting to reset the rout...
Dave

OT: DMZ Zones 1 61 (7/20/2003 6:25:24 AM)
Are DMZ zones suppose to be Internet address or can it be a 172.16.XX.XX? ...
Chris

Hi I have a Cisco 2503, 1601 R and a 4500 1 91 (7/19/2003 7:28:56 PM)
Hi I have a Cisco 2503, 1601 R and a 4500 with 8 serial's and 1 Ethernet. I am looking for step by step Configuration info on how to set up routers from scratch. I am new to Routers, if you know of any on line ...
Arbo

VPDN on 827 1 91 (7/19/2003 10:32:45 AM)
I am trying to configure an 827 ADSL router to act as a PPTP server for a W2K client. I have done this on a 2600 with no problem, but using the same config on the 827, the Windows client hangs on verify usernam...
Michael

Rate Limiting on a 3550/2950 combo 0 78 (7/20/2003 1:49:01 AM)
Hi there.. I have a c3550 with a number trunked ports to c2950's off it for customers networks. On the 3550 I have multiple vlan's on it and the vlan's go to the 2950's. (the 3550 is basically a vlan concentra...
Craig

cisco 4000 +m router 2 84 (7/19/2003 12:31:22 AM)
I aquired a cisco 4000 +M router with the following modules installed. FDDI module (two) np-2e ethernet modules When I boot the router : System Bootstrap, Version 4.14(7), SOFTWARE Copyright (c) 1986-1994 b...
Rainfall

TCL call transfer 0 196 (7/20/2003 12:39:27 AM)
Has anyone been able to successfully create a call transfer with call transfer commands? Leon McCalla leon#caribbeanlink.com (replace # with @ to send me e-mail) ...
leon46 (1)

Choice of Cisco Gigabit Fiber Switch 0 83 (7/19/2003 9:53:03 PM)
Hi, I'm trying find a cheap (contradiction in terms) Cisco Switch (of if necessary combination of switchs) that will allow me to aggregate 4 fiber gigabit adapters in a server to multiple copper gigabit client...
adrian_ogden

Speed and mode with IOS Switches 3 74 (7/18/2003 6:13:28 AM)
Hi, we have one Catalyst 4006 and serveral Catalyst 2950. They work fine but from my point of view there is one problem: If we set the speed and mode of the ports to auto negotiate then there is a slow file tr...
godi

Router 1601 router(boot) 0 138 (7/19/2003 3:44:31 PM)
I've got this router that rebooted and now shows "routername"(boot) and I can't seem to get it to boot normally. Here is the config it's booting to.. Cisco Internetwork Operating System Software IOS (tm) 1600...
shane.fowler (1)