Connecting Two Cisco 2610's each with Wic T1 Dsu/Csu ? 1 458 (2/17/2004 9:02:30 PM)
I am trying to do something in a lab environment and want to make sure it is doable with the cables I have and equipment. I have two 2610's each with T1 DSU's and I want to connect the two via the DSU's to emu...
IHateSpam

4507 isl issue 11 97 (2/10/2004 4:22:19 PM)
OK, looking for some wisdom here. I have a 4507 with two WS-X4418-GB cards. On the first card I am able to set the trunk encapsulation to isl or dot1q. On the second card I am not able to set the encapsulation ...
linuxmanvan (6)

Aironet 1100 Diversity Antenna - Radiation Pattern 0 225 (2/17/2004 9:35:16 PM)
Does anybody have any information on the radiation patter for the 1121G Aironet with the built in diversity antenna? Thx, Patrick ...
patrick_greene

Cisco Network Interface Cards 2 69 (2/16/2004 1:24:28 AM)
Anyone know the model lines for Cisco's Ethernet NIC's both 10/100 and Gigabit as well? I keep looking at cisco.com and I cannot find products anywhere. Thanks in advance all, D.H. ...
David

getting a serial number off an Aironet 350 access point 0 126 (2/17/2004 7:23:15 PM)
I need to get the serial numbers for my access points that have been deployed. Is there any way to get this from the web interface or telnet. I would rather not visit all the locations. ...
rustc (1)

Session-Timeouts and Idle-Timeouts on AS5300 and AS5800 1 90 (2/16/2004 8:33:28 PM)
I'm having the following issue with my Cisco AS5300 and AS5800s. If I set an idle-timeout on them the devices are, for some reason, intepreting the idle-timeout as a session-timeout. So the following radius...
Matt

Catalyst/Extreme Interop 0 73 (2/17/2004 6:56:34 PM)
Hey, I'm having a bit of a crazy problem. Our core switch is an Extreme Alpine. We have a Cisco ICS 7750 VOIP. It's basically a chassis with a catalyst 2908 backplane and blade computers instead of rack mount ...
gary.richardson664 (2)

bridging over a t1 between cisco 2611 and cisco 7206 0 150 (2/17/2004 4:20:57 PM)
this is a temporary setup to extend a network to a new location to faciliate moving entire network. any sample configs? basically ive done this so far on each router interface Ethernet0/0 ip address 206.xxx...
Chad

Static electricity shuts down ports 2 161 (1/15/2004 4:28:46 PM)
Phones: Cisco 7940 IP phones Switches: Catalyst 3550 Basic problem: If a IP phone is shocked with static electricity the cisco switch will stop providing inline power. Detailed problem: Our IP phones are p...
zmanea

PKI 0 151 (2/17/2004 3:49:05 PM)
Hi All, any good idea which PKI / SCEP solution to use to enroll X.509 certs to cisco boxes these days ? jt ...
jt