f



VPN Connection Problems between Cisco PIX 506E and Cisco VPN Concentrator 3005

Hello all,

I got a problem with a vpn connection from a cisco pix 506E to a cisco
3005 concentrator. The problem is that the lan on the pix is also used
to another remote side. so I tried to activate NAT on the pix to
translate the ip adresses of the network. after that I entered the
information at the concentrator which are nessassray for the
lan-to-lan connection.
But I did not get a connection. I tried to ping the outside address of
the pix but I did not get a reply.

I post the output of the logfile for that connection below:



29437 02/15/2005 14:25:21.890 SEV=4 IKE/41 RPT=43758 213.183.66.179 
IKE Initiator: New Phase 1, Intf 2, IKE Peer 213.183.66.179
local Proxy Address 192.168.0.0, remote Proxy Address 213.183.66.179,
SA (L2L: to PIX)

29507 02/15/2005 14:26:02.300 SEV=4 IKEDBG/65 RPT=36896 213.183.66.179
Group [213.183.66.179]
IKE MM Initiator FSM error history (struct &0x3b7510c)
<state>, <event>:
MM_DONE, EV_ERROR
MM_WAIT_MSG6, EV_TIMEOUT
MM_WAIT_MSG6, NullEvent
MM_SND_MSG5, EV_SND_MSG



and here is the config of the pix:

PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname Cisco-Firewall-VPN
domain-name pk-intern.de
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list ipsec permit ip host 2xx.1xx.6x.1xx 192.168.8.224
255.255.255.224
access-list ipsec permit ip 192.168.41.0 255.255.255.0 192.168.4.0
255.255.255.0

access-list ipsec permit ip 192.168.41.0 255.255.255.0 192.168.8.224
255.255.255
..224
access-list nonat permit ip any host 192.168.14.1
access-list nonat permit ip any 192.168.14.0 255.255.255.192
access-list nonat permit ip host 2xx.1xx.6x.1xx 192.168.8.xxx
255.255.255.224
access-list nonat permit ip 192.168.4.0 255.255.255.0 192.168.8.xxx
255.255.255.
224
access-list outside_cryptomap_dyn_20 permit ip any host 192.168.14.1
access-list outside_cryptomap_dyn_20 permit ip any 192.168.14.0
255.255.255.192
access-list outside_cryptomap_30 permit ip 192.168.4.0 255.255.255.0
192.168.8.xxx 255.255.255.224
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 2xx.1xx.6x.1xx 255.255.255.248
ip address inside 192.168.4.xx 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool EDV 192.168.14.1-192.168.14.32 mask 255.255.255.0
pdm location 192.168.4.xx 255.255.255.255 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 2xx.1xx.6x.1xx
nat (inside) 0 access-list nonat
static (inside,outside) 192.168.41.0 192.168.4.0 netmask 255.255.255.0
0 0
route outside 0.0.0.0 0.0.0.0 2xx.1xx.6x.1xx 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225
1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set set-3des esp-3des esp-md5-hmac
crypto dynamic-map outside_dyn_map 20 match address
outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map 20 set transform-set set-3des
crypto map vpn 10 ipsec-isakmp
crypto map vpn 10 match address ipsec
crypto map vpn 10 set peer 2xx.1xx.1xx.9x
crypto map vpn 10 set transform-set set-3des
crypto map vpn 30 ipsec-isakmp
crypto map vpn 30 match address outside_cryptomap_30
crypto map vpn 30 set peer 2xx.1xx.1xx.9x
crypto map vpn 30 set transform-set set-3des
crypto map vpn 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map vpn client authentication LOCAL
crypto map vpn interface outside
isakmp enable outside
isakmp key ******** address 2xx.1xx.1xx.9x netmask 255.255.255.255
no-xauth no-c
onfig-mode
isakmp identity address
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash md5
isakmp policy 10 group 2
isakmp policy 10 lifetime 3600
vpngroup EDV address-pool EDV
vpngroup EDV dns-server 192.168.4.xxx 192.168.2.xxx
vpngroup EDV wins-server 192.168.4.xxx 192.168.2.xxx
vpngroup EDV default-domain pk-intern.de
vpngroup EDV idle-time 1800
vpngroup EDV password ********
telnet 192.168.4.x 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd dns 192.168.4.xxx
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd domain pk-intern.de
username user password mrbAHCmBQ56It1RP encrypted privilege 15
vpnclient server 2xx.1xx.6x.1xx
vpnclient mode client-mode
vpnclient vpngroup user password ********
vpnclient username user password ********
terminal width 80
Cryptochecksum:f18163247c8b2ebfc2cf0a40e3e71ff8
: end
0
bovermann (4)
2/15/2005 2:03:55 PM
comp.dcom.sys.cisco 25313 articles. 0 followers. Post Follow

0 Replies
1225 Views

Similar Articles

[PageSpeed] 17

Reply:

Similar Artilces:

Cisco PIX 501 using pptp to connect to cisco vpn 3005 concentrator
Hello all, I got a question concerning pptp between cisco pix 501 and cisco 3005 concentrator. The secenario is the following: one small lan with the pix as default gateway. the pix connected to the dsl router and this is connected to the internet. vpn pass through is enabled on the router. we want the pix to connect to our cisco concentrator using pptp. means we have no public addresse for the pix like we use it for lan-to-lan connections. the pix should behave like a "normal" windows client connection via vpn to a network. Has anyone a configuration example and the main part is ...

Cisco!! Cisco!! Cisco!!
From http://groups.google.com/group/comp.dcom.sys.cisco/about Top posters This month 18 mer...@geeks.org 11 alagmy 10 bo...@hotmail.co.uk 9 galt...@hotmail.com 9 nom...@example.com 8 troffa...@hotmail.com 8 igor.mamuzicmakni_...@zg.t-com.hr 7 pfisterf...@gmail.com 7 darfun....@gmail.com 6 jfmezei.spam...@vaxination.ca All time 4799 rober...@ibd.nrc-cnrc.gc.ca 2930 aaron@cisco.com 2813 Merv 2370 t...@cisco.com 2356 vcjo...@networkingunlimited.com 1984 b...@cisco.com 1959 bar...@genuity.net 1898 hb...@_nyc.rr.com.remove_ 1745 u...@alp.ee.pbz 1670 bar...@bbnplanet.com -- Member - Liberal International This is doctor@nl2k.ab.ca Ici doctor@nl2k.ab.ca God, Queen and country! Never Satan President Republic! Beware AntiChrist rising! http://twitter.com/rootnl2k http://www.myspace.com/502748630 Born 29 Jan 1969 Redhill,Surrey,England UK ...

Trying to access the PDM of a Cisco pix over a Remote Access VPN with Cisco VPN Client
I am trying to configure the cisco pix (501) to allow access to the PDM over a Cisco VPN Client IPSEC tunnel. I found a situation for accessing the PDM ove a site-site tunnel but am not able to configure it for remote access VPN http://www.cisco.com/en/US/products/sw/netmgtsw/ps2032/products_configuration_example09186a0080094497.shtml I setup VPN by the wizard and enable split tunnel and excempt complete LAN from nat, so not the outside interface ip. Tried with management-access none, inside and outside I am running Cisco PIX Firewall Version 6.3(5) Cisco PIX Device Manager Version 3.0(4)...

W2K vpn client to Cisco 3005 VPN concentrator
I've got a project to configure a Cisco 3005 vpn concentrator to allow connections from the w2k builtin vpn client. The concentrator currently has users connecting via the Cisco client using IPSec, and authenticating against an Active Directory server. The way I understand things is, PPTP is supported, but only without encryption when authentication against Active Directory. And the only other option is L2TP/IPSec, which is mutually exclusive with the IPsec-only that's currently in use. (Have I got this all correct?) So, the only option open here is PPTP without encryption, correct?...

Cisco vpn client to Cisco 837 problem
hi, I have trouble to solve this issue and would like to get your help. I try to set up remote access vpn with cisco client software to a cisco 837 vpn server but I can only get the tunnel up but d'ont be able to ping router ethernet interface nor all computer in the LAN site. cisco client 4.0.2b--------Internet--------ADSL_Cisco 837_vpn_server-------LAN_Windows2003_terminal_server Building configuration... Current configuration : 3499 bytes version 12.3 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ho...

VPN from Cisco to VPN
Does anyone know how to create a VPN (ANy type) from a Cisco 1601 to a Netscreen 100? Or where to get the information. I have emailed you a stepthrough Dave Sinclair NCSA NetScreen Certified Security Associate NCSI NetScreen Certified Security Instructor Equip Technology.com NetScreen Authrorised Training Centre in the UK ...

Cisco PIX vpn and vpn client
I have cisco pix 501 with IOS 6.3(4). and running Cisco VPN client 4.6.04.config is IPSEC over UDP I have a linksys router behind which the pix sits, I have forwarded UDP port 4500, 500, 10000, 50 to the pix. for some reason the vpn client connects from some internet connections and from some it does not and I do not get any error messages. I have attached the log file from the vpn client, when it was not connecting. Thanks for the help. MC -------------------------------------------------------------------------------------------------------------------------- 1 23:42:27.997 12/14/06 Sev=Info/6 IKE/0x6300003B Attempting to establish a connection with 71.78.123.220. 2 23:42:28.017 12/14/06 Sev=Info/4 IKE/0x63000013 SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID(Xauth), VID(dpd), VID(Nat-T), VID(Frag), VID(Unity)) to 71.78.123.220 3 23:42:28.037 12/14/06 Sev=Info/4 IPSEC/0x63700008 IPSec driver successfully started 4 23:42:28.037 12/14/06 Sev=Info/4 IPSEC/0x63700014 Deleted all keys 5 23:42:33.034 12/14/06 Sev=Info/4 IKE/0x63000021 Retransmitting last packet! 6 23:42:33.034 12/14/06 Sev=Info/4 IKE/0x63000013 SENDING >>> ISAKMP OAK AG (Retransmission) to 71.78.123.220 7 23:42:38.041 12/14/06 Sev=Info/4 IKE/0x63000021 Retransmitting last packet! 8 23:42:38.041 12/14/06 Sev=Info/4 IKE/0x63000013 SENDING >>> ISAKMP OAK AG (Retransmission) to 71.78.123.220 9 23:42:43.048 12/14/06 ...

Cisco 1750 Router Cisco QoS Device Manager Cisco VPN Device Manager
Hello can my tell who can find the installfiles for 1750 Router Qos Device Manager and Cisco VPN Device Manager!!! thanks R. Kuhn ...

Cisco VPN Client 4.04 Rel to a PIX 506E connects, but no traffic
I configured a PIX 506E w/ v6.3 PixOS. I can connect just fine however, I cannot see anything at all on the inside network. Here's my relavant config: access-list nonatinside permit ip 192.168.20.0 255.255.255.0 192.168.21.0 255.255.255.0 ! ip local pool clientpool 192.168.21.10-192.168.21.25 ! sysopt connection permit-ipsec crypto ipsec transform-set a-transform esp-3des esp-md5-hmac crypto dynamic-map mydynmap 10 set transform-set a-transform crypto map mymap 10 ipsec-isakmp dynamic mydynmap ! isakmp policy 10 lifetime 86400 vpngroup testlogin address-pool clientpool vpngroup tes...

PIX to PIX plus VPN Client Cisco Problem
Hello all, I configured two VPN, one between two PIX 501 (6.3(1)) and one between a PIX and a Cisco VPN Client 4.0.3 (C). Well, the VPN between PIX works fine, while the VPN between the Cisco VPN Client and the PIX doesn't works. The PIX assigns the IP address (in the pool) to my remote PC but I cannot ping the internal interface of the PIX (192.168.50.100). Thank you in advance for the answer. Bye. Meme : Saved : Written by enable_15 at 23:32:45.392 CEST Tue Feb 10 2004 PIX Version 6.3(1) interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0...

Cisco VPN Concentrator 3005
Hi All, I have a Cisco VPN 3005, I use it for LAN to LAN connections. The problem is it no longer tries to bring up the tunnels. I have traffic routed to the 3005 that is destined for 192.168.5.0 and that is in the remote network list for a LAN to LAN connection. When I try to ping 192.168.5.10 I never get a reply and there is nothing in the VPN log about trying to bring up the tunnel. I must have missed something in configuration, can anyone help, please! I am uisng: VPN Concentrator Type: 3005 Serial Number:N/A Bootcode Rev: Altiga Networks/VPN Concentrator Version 2.2.Rel Mar 22 2000 09...

MAC OS X using Cisco VPN Client through CISCO PIX 501
Hi, I have a bit of an issue driving me completely nuts here... I have a small home network using a Catalyst 1900 switch, PIX 501 and Window and Mac OS X laptops. All computers have the latest update in regards to OS's and Cisco VPN Client, and my PIX config allows any any connection to inside interface (access-list inside_out permit ip any any) Now, I can connect to my office's PIX using the windows laptop just fine, but when I try it with the MAC OS X, I do connect but no traffic passes through, and on top of it internet access o the mac dies instantly (there is a split tunnel a...

[CISCO PIX]VPN IPSec problem
Hi, I've just configured an IPSec tunnel between a PIX 525 and a PIX 501 but my problem is that the first time I want to up the tunnel, I need to generate flow from the remote network (behind the 501) to the local network (behind the 525) AND another flow simultaneously from the local network to the remote network...If I dont do that...the tunnel refuses to permit any traffic... In reality, it's not always possible for me to initiate a flow from the remote LAN to the local one... So, here is my question : How can I do to obtain the fully "upped" VPN as soon as I initiate a flow from my local network to the remote one ??? What is the problem in my configuration ? I don't understand... Best regards, Laurent. Here is a sample of my configuration : Remote Net<-->PIX501<---WAN--->PIX525<-->Local Net With : Remote Net = 192.168.2.0/24 PIX501's IP = 192.168.2.1 and 172.16.2.1 (Wan IP) PIX525's IP = 192.168.1.1 and 172.16.1.1 (Wan IP) Local Net = 192.168.1.0/24 Sample of the config on the PIX 501: access-list 90 permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list 90 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0 access-list inside_nat0_outbound permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0 sysopt connection permit-ipsec crypto ipsec transform-set strong esp-3des esp-sha-hmac crypto map central 20 ipsec-isakmp crypto map central 20 match address 90 crypto map central 20 set pe...

Logging VPN Connections on Cisco PIX
Does anyone know of any software (freeware or commercial) that will allow me to monitor the VPN connections being made to our PIX515E? We are looking to roll the VPN out more widely to a number of staff to work from home etc. but want to know who is actually connecting to the VPN, when they connect and for how long they were connected. Thanks The only way I have done this, is to use XAUTH and a Radius Server. Windows 2k has Radius already built-in, and the process also authenticates them to the domain, so it is not an extra login from the user's perspective. You can then log times etc. as required. If you don't use Windows 2k then there are versions of Radius for Unix/Linux freely available, or you could use TACACS+ if you need to spend some money ;-) Regards, Reg "Keith" <@.> wrote in message news:obIYb.7245$Y%6.744108@wards.force9.net... > Does anyone know of any software (freeware or commercial) that will allow me > to monitor the VPN connections being made to our PIX515E? > > We are looking to roll the VPN out more widely to a number of staff to work > from home etc. but want to know who is actually connecting to the VPN, when > they connect and for how long they were connected. > > Thanks > > ...

Problems connecting with Cisco VPN client
First, let me say I'm in not very well versed in network issues. I'm trying to connect to a client's network through the Cisco VPN Client which they sent along with the configuration file. My network is behind a Linksys router. I have 2 XP machines (desktop and laptop). The laptop connects without any problems, but the desktop will not. I've attached the Cisco log files for both connections below. Their network administrator tells me that the reason I'm not connecting is because of authentication, but that doesn't make sense since the laptop can connect without any issues. My guess is that there is a setting issue of some kind on the desktop which I can't figure out. I do not use XP firewall, have Norton AV and have disabled the Worm Protection (though on the laptop it is not disabled and works fine). Any ideas/help would be greatly appreciated. If you need me to post additional info, please be considerate of my limited knowledge when asking. B ************************ DESKTOP LOG ************************ Cisco Systems VPN Client Version 4.8.01.0300 Copyright (C) 1998-2005 Cisco Systems, Inc. All Rights Reserved. Client Type(s): Windows, WinNT Running on: 5.1.2600 Service Pack 2 Config file directory: C:\Program Files\Cisco Systems\VPN Client\ 1 17:17:58.015 09/27/06 Sev=Warning/3 GUI/0xA3B0000B Reloaded the Certificates in all Certificate Stores successfully. 2 17:18:06.281 09/27/06 Sev=Info/4 CM/0x63100002 Begin connection p...

Cisco Pix 510
Hi, I'm new to the Cisco Pix and firewall. I have made a VPN configuration and can connect to the Pix through VPN. I can't se the server on the LAN side. The LAN DHCP pool is : 10.5.75.100 - 10.5.75.131 The VPN Pool is : 10.5.75.150 - 10.5.75.160 The server on the LAN side isn't using DHCP. It's IP address is : 10.5.75.10 What must I change to make it work ? (pleas post the commands with the req. options that have to be used) Thanks. Here is the configuration as it is now : PIX Version 6.3(4) interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password xxxxxxxxxxxx/ encrypted passwd xxxxxxxxxxx encrypted hostname pixfirewall domain-name ciscopix.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 10.5.75.10 Server pager lines 24 mtu outside 1500 mtu inside 1500 ip address outside dhcp setroute ip address inside 10.5.75.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm ip local pool RTS 10.5.75.150-10.5.75.160 pdm location 10.5.75.0 255.255.255.0 inside pdm location 10.5.75.128 255.255.255.192 outside pdm location 10.5.75.0 255.255.255.255 inside pdm...

cisco VPN 3005 L2TP problems
Hello, I have problems with Cisco VPN box 3005 using L2TP over IPsec here is the error... 1101 07/02/2004 12:26:10.020 SEV=4 IKE/1 RPT=3 192.84.100.1 Group [wingroup] User [test] Received invalid phase 2 L2TP/IPSec Responder ID payload Expected ID: Type 1, Proto 17, Port 1701, Addr 192.84.100.2 Received ID: Type 4, Proto 0, Port 0, Addr 0.0.0.0 the golabal box configuration looks fine in fact it works with straight IPSec configuration. With L2TP over IPSsec it does not work. any hints? thank you Rick ...

Cisco 831 VPN to Cisco 3030 Security
I'm planning on deploying Cisco 831 VPN routers and having them connect to the Corp office over a DSL connection to a Cisco 3030. I'm curious how others handled security to keep unwanted users out. This of course assumes you have split tunneling off and there is a branch office type setup. I'm trying to figure out how to have some sort of login/password challenge to keep one of our remote users family members from plugging in a laptop or similar system and connecting to our network. The DHCP will only serve up one usable IP address from the 831 but you never know. Any help is m...

connecting a Cisco 2610 to a Cisco PIX Firewall
I need assistance with a configuration. I have a cisco 2610 router in the office here. I need to connect to a customers site over our ADSL using a 3DES VPN. Our customer has a PIX515 Firewall and needs me to give him a configuration to paste onto the firewall. I have never set up a PIX515 before. We have a number of router to router VPNs set up but none to a firewall. Any config advice would be appreciated. Preferably something I could just ammend with the relevant IP Addresses and paste onto the PIX and router Thanks For a Pix 501 I have used:- access-list site-to-site permit ip PIXIP ...

Cisco VPN clients unable to connect to 3725 VPN server
I have a 3725 router that is acting as a VPN server as well as a performing NAT for the internal network. The VPN is setup to connect to another remote network and to allow clients to connect securely to the router and access the local network The problem is the client is prompted for the user name and password but it won't establish the connection so I'm not sure what's missing. Any help would be greatly appreciated. The only error I get is: Jan 18 18:21:06.319: %CRYPTO-6-IKMP_MODE_FAILURE: Processing of Quick mode failed with peer at 172.16.2.4 Here's the config: ! ! Last configuration change at 13:30:31 PCTime Fri Jan 18 2008 by rsreese ! NVRAM config last updated at 13:30:34 PCTime Fri Jan 18 2008 by rsreese ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname 3725router ! boot-start-marker boot-end-marker ! no logging buffered enable secret 5 $1$BUZ8$sNjxnHHht1NP3co5Vkj2o0 ! aaa new-model ! ! aaa authentication login default local aaa authentication ppp default local aaa authorization exec default local aaa authorization network default local ! aaa session-id common clock timezone PCTime -5 clock summer-time PCTime date Apr 6 2003 2:00 Oct 26 2003 2:00 no network-clock-participate slot 1 no network-clock-participate slot 2 ip cef ! ! no ip dhcp use vrf connected ip dhcp excluded-address 172.16.2.1 ip dhcp excluded-address 172.16.3.1 ! ip dhcp pool VLAN2clients network 172.1...

VPN IPSEC connection between a cisco 17xx and Nortel vpn box
I've allready set up 3 same connections but, the fourth just won't come up. I use a cisco 17xx to connect to the nortel box. crypto isakmp policy 1 hash md5 authentication pre-share crypto isakmp key $$$$$ address xxx.xxx.xxx.xxx crypto ipsec transform-set TRANSFORM_VPN esp-3des esp-md5-hmac ! crypto map ENCRYPT_DAF 1 ipsec-isakmp set peer xxx.xxx.xxx.xxx set transform-set TRANSFORM_VPN set pfs group1 match address 191 Crypto policy on the Nortel VPN Box: - Encr : 3des - Hash : md5 - Authentication pre-share Al i see in the debug is "notify has no ...

VPN - Cisco IOS <-> VPN Client
Hello everybody, I have tried to set up a VPN connection from Cisco VPN Client to Cisco Router 2621 (64MB RAM/ 16MB Flash) - with enterprise IOS 12.2. When I map a crypto map to the interface ( crypto map CRYPTOMAP to serial 0/0.1 ) - the nat stopped working and I havn't got a remonte connection to my router and other services behind the router. When I got to the LAN I was able to connect to router via ssh. I don't know what is wrong. I have studied Cisco materials and some other configs without any ideas. Would You be so kind and help me with this configuration ? Than...

Problems with Cisco 800 and Pix 515 VPN
Hi, I have a Central PIX 515UR configured as easyvpn Server. When I try to connect as vpn client using a cisco 800 router, the connection couldnot be established and the syslog record this error message: %CRYPTO-6-IKMP_MODE_FAILURE: Processing of Aggressive �mode failed with peer at 200.200.200.200 I have several vpn software clients and 2 soho 91 and they have no problems to establish the vpn connection any sugestions ? Thanks in advance Javier In article <0zbMd.29767$UB2.8105@fe74.usenetserver.com>, Javier <jvillegas@elsitio.net> wrote: : I hav...

Cisco Pix 510
Hi, I'm new to the Cisco Pix and firewall. I have made a VPN configuration and can connect to the Pix through VPN. I can't se the server on the LAN side. The LAN DHCP pool is : 10.5.75.100 - 10.5.75.131 The VPN Pool is : 10.5.75.150 - 10.5.75.160 The server on the LAN side isn't using DHCP. It's IP address is : 10.5.75.10 What must I change to make it work ? (pleas post the commands with the req. options that have to be used) Thanks. Here is the configuration as it is now : PIX Version 6.3(4) interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password xxxxxxxxxxxx/ encrypted passwd xxxxxxxxxxx encrypted hostname pixfirewall domain-name ciscopix.com fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 10.5.75.10 Server pager lines 24 mtu outside 1500 mtu inside 1500 ip address outside dhcp setroute ip address inside 10.5.75.1 255.255.255.0 ip audit info action alarm ip audit attack action alarm ip local pool RTS 10.5.75.150-10.5.75.160 pdm location 10.5.75.0 255.255.255.0 inside pdm location 10.5.75.128 255.255.255.192 outside pdm location 10.5.75.0 255.255.255.255 inside pdm...

Web resources about - VPN Connection Problems between Cisco PIX 506E and Cisco VPN Concentrator 3005 - comp.dcom.sys.cisco

IBM's solar concentrator can produce energy, clean water and AC
IBM Research and Switzerland-based Airlight Energy today announced a new parabolic dish that increases the sun's radiation by 2,000 times while ...

Skyscraper Under Construction In London Unintentionally Doubles As Parabolic Concentrator, Melts Parked ...
... that the architect behind the new “Walkie Talkie” being constructed in downtown London has unintentionally created a giant parabolic concentrator ...

IBM’s solar concentrator can produce energy, clean water and AC
... a new parabolic dish that increases the sun's radiation by 2,000 times while also producing fresh water and air conditioning. The new Concentrator ...

Are Concentrators Finally Gaining Ground?
A 30-megawatt deal in Colorado, among other events, signals that the often-dismissed technology might make it after all. Maybe concentrators ...

Researchers Develop Transparent Solar Concentrator That Could Cover Windows, Electronics
Scientists at Michigan State University announced this week the creation of a “transparent luminescent solar concentrator” that could turn windows ...

Sharp’s Concentrator Solar Cell Sets 43.5% Conversion Efficiency Record! Sharp Sets 43.5% Solar Efficiency ...
... cell efficiency record of 43.5% , eclipsing its previous record of 36.9% set in November . Sharp shattered the efficiency record with its concentrator ...

White butterflies as solar photovoltaic concentrators : Scientific Reports : Nature Publishing Group
Man’s harvesting of photovoltaic energy requires the deployment of extensive arrays of solar panels. To improve both the gathering of thermal ...

Researchers boost solar concentrator efficiency
A team of researchers at the University of California, Merced, has redesigned luminescent solar concentrators to be more efficient at sending ...

SunPower Sells More Than 70 Megawatts in Concentrator Cell Packages for... SAN JOSE, Calif., March 25 ...
SAN JOSE, Calif., March 25, 2014 /PRNewswire/ SunPower Sells More Than 70 Megawatts in Concentrator Cell Packages for Two Projects in Inner Mongolia, ...

Researchers' refinement increases solar concentrator efficiency
Researchers have discovered that changing the shape of a solar concentrator significantly increases its efficiency, bringing its use closer to ...

Resources last updated: 3/28/2016 7:41:03 PM