f



Compile Warnings and Errors

Hello,

Just trying my first program.  It's a FIR filter below.  For some reason, if
it is put in "void main()" without the "return y" line, it spits out a
compile warning on the line "float y[20]" saying the variable y was never
referenced.  If I put it into its own function, "float fir()", and then call
it from "void main()", it produces a compile error on the line "return y"
saying "return value type does not match the function type"

 int i, j;
 int datapoints = 10, length = 10;
 float temp;
 float x_d[10] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
 float y[20];
 int taps[10] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10};
 float x[10] = {0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1};

 for (j=0;j<(datapoints-1);j++)
 {
  x_d[0] = x[j];
  temp = 0;
  for (i=(length-1);i>0;i--)
  {
   temp = temp + x_d[i] * taps[i];
   if (i != 0)
    x_d[i] = x_d[i-1];
  }
  y[j] = temp;
 }
 return y;


0
choi (39)
7/18/2004 2:42:11 PM
comp.dsp 20333 articles. 1 followers. allnor (8509) is leader. Post Follow

6 Replies
740 Views

Similar Articles

[PageSpeed] 56

Peter Choi wrote:

> Hello,
> 
> Just trying my first program.  It's a FIR filter below.  For some reason, if
> it is put in "void main()" without the "return y" line, it spits out a
> compile warning on the line "float y[20]" saying the variable y was never
> referenced.  If I put it into its own function, "float fir()", and then call
> it from "void main()", it produces a compile error on the line "return y"
> saying "return value type does not match the function type"
> 
>  int i, j;
>  int datapoints = 10, length = 10;
>  float temp;
>  float x_d[10] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
>  float y[20];
>  int taps[10] = {1, 2, 3, 4, 5, 6, 7, 8, 9, 10};
>  float x[10] = {0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1};
> 
>  for (j=0;j<(datapoints-1);j++)
>  {
>   x_d[0] = x[j];
>   temp = 0;
>   for (i=(length-1);i>0;i--)
>   {
>    temp = temp + x_d[i] * taps[i];
>    if (i != 0)
>     x_d[i] = x_d[i-1];
>   }
>   y[j] = temp;
>  }
>  return y;
> 
> 

In the case where it's in main you never do anything with y so the 
compiler tidily optimizes it away.

In the case of your function you're returning an array of floats as a 
float.  You need to (a) create y outside of your function and pass it in 
as a pointer & modify the parts, and (b) re-check your basic C 
programming skills.

-- 

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com
0
tim261 (895)
7/18/2004 4:25:55 PM
Hello,

"Tim Wescott" <tim@wescottnospamdesign.com> wrote in message
news:10fl94bsms23972@corp.supernews.com...
> In the case where it's in main you never do anything with y so the
> compiler tidily optimizes it away.
Isn't the line " y[j] = temp;" doing something with y?


0
choi (39)
7/18/2004 4:51:36 PM
But you don't read it anywhere. That is what the compiler means by "unused".
Try printing the contents of the array to the console using printf. Not much 
point in the program unless you can read the output!


Richard Dobson

Peter Choi wrote:

> Hello,
> 
> "Tim Wescott" <tim@wescottnospamdesign.com> wrote in message
> news:10fl94bsms23972@corp.supernews.com...
> 
>>In the case where it's in main you never do anything with y so the
>>compiler tidily optimizes it away.
> 
> Isn't the line " y[j] = temp;" doing something with y?
> 
> 
0
7/18/2004 5:15:53 PM
Peter Choi wrote:
> Hello,
> 
> "Tim Wescott" <tim@wescottnospamdesign.com> wrote in message
> news:10fl94bsms23972@corp.supernews.com...
> 
>>In the case where it's in main you never do anything with y so the
>>compiler tidily optimizes it away.
> 
> Isn't the line " y[j] = temp;" doing something with y?
> 
> 
Yes, but y is never read, and aggressive compilers will figure this out.

If you define y outside the function and don't declare it static the 
compiler won't know if you are planning on using it outside the file, so 
it won't optimize it away.

-- 

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com
0
tim261 (895)
7/18/2004 6:09:12 PM
Hello,
Ah I see.  So if it is the in the "void main()" function and I have no
printf statements to make use of it or any other means of making use of it,
the compiler will generate a warning.  But if it's in a function, then it is
okay.

Now what is declaring something static?  I guess I'd have to read my C book
to figure this out.  Sorry I come from the Matlab world.  We don't have to
do any declaration of anything.


"Tim Wescott" <tim@wescottnospamdesign.com> wrote in message
news:10flf604168k820@corp.supernews.com...
> Yes, but y is never read, and aggressive compilers will figure this out.
>
> If you define y outside the function and don't declare it static the
> compiler won't know if you are planning on using it outside the file, so
> it won't optimize it away.



0
choi (39)
7/18/2004 7:06:50 PM
Peter Choi wrote:

> Hello,
> Ah I see.  So if it is the in the "void main()" function and I have no
> printf statements to make use of it or any other means of making use of it,
> the compiler will generate a warning.  But if it's in a function, then it is
> okay.
> 
> Now what is declaring something static?  I guess I'd have to read my C book
> to figure this out.  Sorry I come from the Matlab world.  We don't have to
> do any declaration of anything.
> 
> 
> "Tim Wescott" <tim@wescottnospamdesign.com> wrote in message
> news:10flf604168k820@corp.supernews.com...
> 
>>Yes, but y is never read, and aggressive compilers will figure this out.
>>
>>If you define y outside the function and don't declare it static the
>>compiler won't know if you are planning on using it outside the file, so
>>it won't optimize it away.
> 
> 
> 
> 
Declaring something static is a convenience for structured 
sorta-object-like programming in C: if you say

static float y[20];

you're telling the compiler to make an array of 20 floats that is only 
to be referenced from that one file -- it won't export the name, so you 
wouldn't be able to reference y from another file.  If you just say

float y[20];

then the name 'y' is exported, and any other file can use it -- and 
it'll collide with any other thing that's global and named 'y'.

For what you're doing DO NOT WORRY.  Later it'll be an issue, but by 
then you won't be swimming in a sea of new information.

-- 

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com
0
tim261 (895)
7/18/2004 8:21:54 PM
Reply:

Similar Artilces:

Why in some compilers if a function is not declared, the compiler gives out a "warning" and not an "error"??
In ARMCC, and Microsoft C, when i use a function which is never defined or delared, it gives out a warning, not a compiling error? why? (This leads to a bug to my program since I seldom pay much attention to warnings...) Thanks for explanation! In article <0b56ca9a-d285-4b9b-a531-3a276378fea8@s12g2000prg.googlegroups.com>, lostlander <lostlander.tom@gmail.com> wrote: >In ARMCC, and Microsoft C, when i use a function which is never >defined or delared, it gives out a warning, not a compiling error? >why? It might not matter, if it never gets called (which may of cours...

Daily errors/warning during compile
----=--=--=-=--=--=---===-==-=--===-===--=--====== Mime-Version: 1.0 Content-Type: multipart/mixed; x-avg-checked=avg-ok-66317AEB; boundary="=======4EA15C25=======" --=======4EA15C25======= Content-Type: multipart/alternative; x-avg-checked=avg-ok-66317AEB; boundary="=====================_1078406==.ALT" --=====================_1078406==.ALT Content-Type: text/plain; x-avg-checked=avg-ok-66317AEB; charset=us-ascii; format=flowed Content-Transfer-Encoding: 8bit dummy.cpp ...\..\include\wx/string.h(1290) : warning C4100: '__$ReturnUdt' : unreferenc...

Error 8 Compilation Error. File permission error or DMA hardware error detected
I just upgraded my Labview code to Labview 8.5 from LV8.2.1 Then I tried to compile&nbsp;my code to get an .exe file I keep getting the following error, &nbsp; Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference: Error 8 occurred at Write to Text File in AB_Engine_Update_INI_Header.vi-&gt;AB_Application.lvclass:Create_INI_File.vi-&gt;AB_Application.lvclass:Copy_Files.vi-&gt;AB_Build.lvclass:Build.vi-&gt;AB_EXE.lvclass:Build.vi-&gt;AB_Build.lvclass:Build_from_Wizard.vi-&gt;AB_UI_FRAMEWORK.vi-&gt;AB_Item_OnDoProperties.vi-&gt;AB_Item_OnDoProperties.vi.ProxyCaller Possible reason(s): LabVIEW:&nbsp; File permission error. You do not have the correct permissions for the file.=========================NI-488:&nbsp; DMA hardware error detected. C:\UserData\LabView\IFX Interop Test exe\GMXiTest.ini &nbsp; I never have this problem if I compile using LV8.2.1. Please help! Thanks. &nbsp; hi there just to be sure: has 8.5 been installed under an other account than yours? make sure you have the windows access rigths to the LabVIEW - folder. Hi, Yes I have administrator rights on the PC. It was installed with full R/W permission. I saw in the forum that others are having the same problem and tried this work-around mentioned but it did not work. <a href="http://forums.ni.com/ni/board/message?board.id=170&amp;message.id=172537&amp;query...

Warning: View created with compilation errors.
Hello, I'm trying to create some views from an AIX 5.2 64 bit Oracle 9i database to an AIX 4.3.3 32 bit Oracle 8.1.6 database. when I run the create view statement, I get the following: SQL> create view scrpei_rec as select * from scrpei_rec@rpsa; Warning: View created with compilation errors. SQL> show errors; No errors. If I try to delete the view, I get the message that the view does not exist. Any ideas?? Best Regards, Marion Larochelle Technology Integration Support Analyst marionl@invera.com Marion wrote: > Hello, > > I'm trying to create some views from an AIX 5.2 64 bit Oracle 9i > database to an AIX 4.3.3 32 bit Oracle 8.1.6 database. > > when I run the create view statement, I get the following: > > SQL> create view scrpei_rec as select * from scrpei_rec@rpsa; > > Warning: View created with compilation errors. > > SQL> show errors; > No errors. > > If I try to delete the view, I get the message that the view does not > exist. > > Any ideas?? > > Best Regards, > Marion Larochelle > Technology Integration Support Analyst > marionl@invera.com My guess is one of lack of capitalization ... are there any quote marks in the SQL you actually ran or the fact that the database link name on one is not present on the other. -- Daniel Morgan http://www.outreach.washington.edu/ext/certificates/oad/oad_crs.asp http://www.outreach.washington.edu/ext/certificates/aoa/ao...

Warning: Package body created with compilation errors
I can't figure this one out. I'm using Toad and creating packages but I keep getting the error message: "Warning: Package body created with compilation errors" when trying to compile a package body. Here is a simple extract from a widely available random number generator. I would expect this to compile with no prob but, alas, it doesn't. I've combed the code for syntax error and can't find any. Could one of you Oracle gurus take a look at this and tell me: 1. Why is this script generating the error message? 2. Is there some way to get a better description of the compiler error that is occuring? Either through the Toad UI or via a SQL command? /**********************************************************/ CREATE OR REPLACE PACKAGE GenRand AS PROCEDURE ChangeSeed(p_NewSeed IN NUMBER); END GenRand; CREATE OR REPLACE PACKAGE BODY GenRand AS v_Seed NUMBER := 1; PROCEDURE ChangeSeed(p_NewSeed IN NUMBER) IS BEGIN v_Seed := p_NewSeed; END ChangeSeed; BEGIN ChangeSeed(TO_NUMBER(TO_CHAR(SYSDATE, 'SSSSS'))); END GenRand; /**********************************************************/ Thanks for you help SWalker SJWalker wrote: > /**********************************************************/ > CREATE OR REPLACE PACKAGE GenRand AS > PROCEDURE ChangeSeed(p_NewSeed IN NUMBER); > END; / <---------------- (need a slash here) > CREATE OR REPLACE PACKAGE BODY G...

Compiling a kernel... a compiler error!
OK, I am compiling a home-brew kernel. At the beginning, it was all Assembly, and ld.exe performed perfectly for linking. However,when I added some standard c code, I got an error which I can't resolve. First of all, here are my calls. BTW, NASM is the Assembly compiler: C:\djgpp\bin\gcc.exe -Wall -O -fstrength-reduce -fomit-frame-pointer -finline-functions -nostdinc -fno-builtin -I./include -c -o main.o main.c C:\Osdever\NASM\nasm.exe -f aout -o start.o start.asm C:\djgpp\bin\ld.exe -T link.ld -o kernel.bin start.o main.o And here is the error from gcc.exe: In file included from <command line>:1: c:/djgpp/lib/gcc-lib/djgpp/3.1/djgpp.ver:1:25: sys/version.h: No such file or directory (ENOENT) I can't figure it out, since I don't call version.h from ANYWHERE withing my code. Any ideas? version.h tells gcc which version of djgpp is installed. It's included by default, so just provide an empty one in your local include directory. Note: before you say "gcc shouldn't do that", remember that you're using a *djgpp* compiler. So, yes, it should. If you want to avoid this, the right thing to do is build a cross compiler to, say, i386-elf or i386-coff. Then they won't include anything djgpp-specific. ...

compiling plpython compilation error
Hi all. Im having a hard time trying to compile the plpython package. This is the error make gives me: gherzig@vdb:/usr/local/src/postgresql-8.2.5/src/pl/plpython> make gcc -O2 -Wall -Wmissing-prototypes -Wpointer-arith -Winline -Wdeclaration-after-statement -Wendif-labels -fno-strict-aliasing -fpic -shared -Wl,-soname,libplpython.so.0 plpython.o -L/usr/lib/python2.5/config -L../../../src/port -lpython2.5 -lpthread -ldl -lutil -lm -Wl,-rpath,'/usr/lib/python2.5/config' -o libplpython.so.0.0 /usr/lib64/gcc/x86_64-suse-linux/4.2.1/../../../../x86_64-suse-linux/bin/ld: /usr/lib...

Compilation error with seperate compilation
Can anyone help me with the following problem When i compile a program which is devided in three files and i compile with GCC i'm getting the follwong error However when i put it in one file it conpiles and runs perfectly So it has probaly something to do with the includes , but i do not see what Many regards Nico Heiligers **** Build of configuration Debug for project acc **** **** Internal Builder is used for build **** g++ -O0 -g3 -Wall -c -fmessage-length=0 -oreadadfile.o .. \readadfile.cpp In file included from ..\readadfile.cpp:1: ...\adfile.h:12: error: ISO C++ forbids declaration ...

Compilation errors with aCC compiler
Hi, I am getting compilation error in folloing situation: Here, I am giving sample piece of code. a.h: ------- extern int g_switch; ------ in "a.c", g_switch = 0; it is giving following error: Error 173: "a.c", line 19 # Redefined symbol 'g_switch'; previously defined at ["../../include/a.h", line 3]. But this code is working fine in all other systems like Suse, Solaris and Windows. System information : HP-UX C3600 B.11.00 U 9000/785 2003506592 unlimited-user license aCC version : aCC: HP ANSI C++ B3910B A.03.55 Please let me know if any c...

configure: error --- compile error
can u help me and guide a litte bit? please. [root@home cyrus-imapd-2.1.15]# ./configure creating cache ./config.cache checking host system type... i686-pc-linux-gnu checking for makedepend... /home/auser/cyrus-imapd-2.1.15/tools/not-mkdep configure: warning: Makedepend is not installed on this system. You should compile and install the version from the makedepend subdirectory. checking for gcc... gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... yes checking whether gcc accepts -g... yes checking for ranlib... ranlib checking whether make sets ${MAKE}... yes checking for a BSD compatible install... /usr/bin/install -c checking how to run the C preprocessor... gcc -E checking for AIX... no checking for strerror in -lcposix... no checking for mawk... no checking for gawk... gawk checking for working const... yes checking for long file names... yes checking for __attribute__... yes checking if compiler supports -fPIC... yes checking for runpath switch... -Wl,-rpath, checking for unistd.h... yes checking for sys/select.h... yes checking for sys/param.h... yes checking for stdarg.h... yes checking for memmove... yes checking for strcasecmp... yes checking for ftruncate... yes checking for strerror... yes checking for strlcat... no checking for strlcpy... no checking for dirent.h that defines DIR... yes checking for opendir in -ldir... no checking for connect... yes...

Errors and Warnings after compiling MATLAB GUI m-file
Hello Matlab Community, I need help ASAP! Any thoughts/input on what might be going wrong would be appreciated. I'm new to creating Matlab GUIs. I have created a straight forward GUI that works fine in the Matlab enviroment and consists of simple static text, editable text and push buttons. When I compile to create a stand alone application using 'mcc -o outputfile -m guifilename.m', the warnings and errors below are generated (the GUI does pop-up when I click on the .exe file but does not function): - Warning: Could not find appropriate function on path loading function handle C:\Program Files\MATLAB\R2008a\toolbox\matlab\guide\guidemfile.m@<hObject,eventdata>MFL_GUI<'input1_Callback',hObject,eventdata,guidata<hObject>> > In hgload at 43 In openfig at 78 In gui_mainfcn>local_openfig at 271 In MFL_GUI at 16 (It loops over and over) Then the following: ??? Error using ==> struct2handle Undefined function handle ??? Error using ==> struct2handle Error while evaluating uicontrol CreateFcn Any help would be appreciated... Thanks, J J J wrote: > I need help ASAP! Any thoughts/input on what might be going wrong would > be appreciated. I'm new to creating Matlab GUIs. I have created a > straight forward GUI that works fine in the Matlab enviroment and > consists of simple static text, editable text and push buttons. When I > compile to create a stand alone applicat...

ld undefined symbols after compilation w/o errors or warnings
I ran into to following problem using Visual Age C++ 6.0 on AIX 5.1 Header "A.h" class A { public: void f (); private: static const int i = 32; double a [i]; }; /* */ Definition "A.cpp" # include "A.h" void A :: f () { int j (0); j += i; } Main.cpp # include "A.h" int main () { A a; a.f (); return 0; } xlC -c A.cpp -o A.o && xlC -c Main.cpp -o Main.o xlC -o test Main.o A.o ld: 0711-317 ERROR: Undefined symbol: A::i ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information. After replacing "static const int i=32;" with "enum{ i=3 };" the program "test" links w/o errors, but is quite unreadable code. Why is there no compile time error/warning??? The real problem appeared during linkage of the heart of Firefox/Thunderbird's libxul.so and to make things even harder "i" was passed down to the class as a template parameter. Thanks to the -bnoquiet ld flag :-) XLC/C++ 7.0 compiles and links this fine, but I want to keep the runtime dependencies low enough for vanilla AIX 5.3 which meens xlC.aix50.rte 6.0.0.13 and had lots of core dumps after compiling exactly the same code which worked fine wich vacpp6 and crosschecked with GCC 4.1 on CentOS 5.3 -- ULi ...

Help, getting compiler error warning on returning a temporary character string
I'm getting a compiler error: warning C4172: returning address of local variable or temporary Here is the function that I have giving this error: I'm returning a temporary char string and its not liking it. How can I fix this? char *dequeue(struct node **first) { char temp[1024]; struct node *p=*first; if(*first==NULL) { printf("\nqueue is empty\n"); return(0); } else { p=*first; *first=(*first)->next; strcpy(temp,p->data); free(p); return(temp); <----------------- compiler is not liking this } } Big thanks! JT j...

transform
Hi, I get a compiler error when trying to use std::transform to iteratate/modify a list. If I write the same code by hand, it compiles fine. Am I misusing transform, or is this a compiler bug? The types involved are complex templates, but I don't think this should have any bearing on things. ------------------------------- const UserIFSeq& uList; UserIFSeq::const_iterator i; UserISeq users; // // Compiles Fine. // for (i = uList.begin(); i != uList.end(); i++) users.push_back(UserIPrx::uncheckedCast(*i)); // // Produces Error. // std::transform(uList.begin(), uList...

#SERVER ERROR: Error while Compiling # FPGA
It seems like I can't compile&nbsp;my FPGA vi to the pci7831r anymore, I get the message "#SERVER ERROR:&nbsp;&nbsp;&nbsp; Error while Compiling&nbsp; #" when I try to do that. Is there anyone that knows anything about this problem. Recently i have also installed a 6259 Ni-daq device and I want to use it paralel with my FPGA device, could maybe this&nbsp;be the problem? I have attached&nbsp;two pictures of the messages I recieve when I try to compile my program. &nbsp; Thanks in advance &nbsp; /trajkan&nbsp; 1.JPG: http://forums.ni.com/attachments/ni/170/183987/1/1.JPG 2.JPG: http://forums.ni.com/attachments/ni/170/183987/2/2.JPG ...

Simulink C code generation: Error when compiling wavelet DSP blocks with real time workshop
Using the Simullink Real Time workshop, I generate a C++ code from my model which contain blocks from DSP librarie related to wavelet: 'Dyadic Analysis Filter Bank' and 'Dyadic Synthesis Filter Bank' (DWT and IDWT blocks). When I compile the C program I get the following error messages: error LNK2019: unresolved external symbol _MWDSP_2ChABank_Fr_DF_DD referenced in function "void __cdecl my_program_step(int)" error LNK2019: unresolved external symbol _MWDSP_Buf_OutputFrame_1ch referenced in function "void __cdecl my_program_step(int)" error LN...

commenting errors flagged as warnings instead of errors
I'm using Visual C++ on Windows Vista. Being "only human", I sometimes use ***************************************/ to underline a section of code instead of the correct /************************************/ I'm surprised by the fact that my mistake generates a warning rather than an error. How does the compiler understand *************************/ ? Thanks On Apr 8, 10:26=A0pm, Comp1...@yahoo.co.uk wrote: > I'm using Visual C++ on Windows Vista. > Being "only human", I sometimes use > ***************************************/ =A0 to ...

Error compiling file using lcc compiler
Hi I'm using the lcc compiler for win32. I tried compiling a program but there's an error stating: "cpp: Can't open input file clrscr()" I don't get it - I've included <tcconio.h>. (strange why they couldn't have just left it as <conio.h>?): #include <tcconio.h> // code ---- Albert Albert wrote: > Hi > I'm using the lcc compiler for win32. I tried compiling a program but > there's an error stating: "cpp: Can't open input file clrscr()" > > I don't get it - I've included <tcconio.h>. ...

[wxMac 2.8.4, wxMSW ?] "Strange" Mac g++ compiler errors trying to compile Windows compilable wx code
Hi, folks! I'm trying to compile some wx C++ code written by a colleague; I'm working late so can't consult him, but seeing as how he's primarily a Windows developer and the code in question compiles thereon, I'm not sure how much he'd be able to help me figure out why I'm having the problems I'm having trying to do it on a Mac w/ g++. The first "symptom" was the compiler complaining about an overloaded method ambiguity: "error: call of overloaded 'wxString(const char [33])' is ambiguous" Here's the problem lin...

Netbeans compiler always error with error code 1.
Hi All, After re-install netbeans IDE with wireless toolkit, my IDE show a problem when I compiler java code every time, ".........\nbproject\build-impl.xml:228: Execution failed with error code 1." Could you please help? I re-install so many times, it still happen, if I run it in WTK directly, it will success, why ... Best regards, Boki. boki wrote: > Hi All, > After re-install netbeans IDE with wireless toolkit, my IDE > show a problem when I compiler java code every time, > > > ".........\nbproject\build-impl.xml:228: Execution failed with error > code 1." So, what's on line 228 of build-impl.xml? --Mike Amling um.. leave on company, home now. I think there is no problem on source code, becasue it could be pass compiler when I using WTK directly, I guess there is something wrong on my NETBEANS setting.... but I just never change it... @@ .. but I had reinstalll several times... sad... why broken..@@ Best regards, Boki. "Michael Amling" <nospam@nospam.com> ???????:wjz0e.10412$ZB6.4950@newssvr19.news.prodigy.com... > boki wrote: >> Hi All, >> After re-install netbeans IDE with wireless toolkit, my IDE >> show a problem when I compiler java code every time, >> >> >> ".........\nbproject\build-impl.xml:228: Execution failed with error >> code 1." > > So, what's on line 228 of build-impl.xml? > > --Mike...

Problems with ld: Unresolved error C++ compiling error
Hi Everyone, > The problem that I have involves program that searches for a certain string within a file. As seen in the code, I have declared a Strings class which overrides the string class in C++. Inside of this class, it has a function called findStr (replaces the find in string.h) which will return a 0 when it is able to find an occurrence within the file. If not, it will return a -1. The Strings.h has the function Get_Line which is defined and the error is shown below: Strings.h: void get_line( istream & ); > ld: Unresolved: > String::get_line(std::ba...

Problem with C++ Compiling Error ld: Unresolved Error
Hi Everyone, The problem that I have involves compiling two files. I've received this error before and I understood that I was missing the correct library. The error is as follows: ld: Unresolved: String::getline(std::basic_istream <char, std::char_traits<char>&>, const &String String) The code segment follows this structure: #include <fstream> #include "String.h" #include <string> function() { String val = ""; ifstream File; int num_of_exits=0; try { File.open(<path>, ...

FPGA Compile Error due to error in mapping process
Received the following error while trying to compile a FPGA VI on a PC. (Refer to attachment for details). My PC has a fresh installation of English Windows 2000 with sp4. No other software is installed except LabVIEW 8.2 &amp; FPGA Module 8.2 &amp; NI-RIO. I have checked this KB and confirmed that regional settings are English. But the error still exists. I tried compiling the same VI on my laptop with Windows 2000 sp4 and it was successful. Can someone help me? Thank you very much!<a href="http://digital.ni.com/public.nsf/allkb/A45687D827A81D6E86257195007807B3" target="_blank"> FPGA Compile Error When Compiling LabVIEW FPGA VI</a> Error found in mapping process, exiting...Errors found during the mapping phase.&nbsp; Please see map report file for moredetails.&nbsp; Output files will not be written.Design Summary--------------Number of errors&nbsp;&nbsp; :&nbsp; 17Number of warnings :&nbsp;&nbsp; 8ERROR:Xflow - Program map returned error code 2. Aborting flow execution... Message Edited by maimai on 01-08-2007 01:00 AM FPGA Compile Error.txt: http://forums.ni.com/attachments/ni/170/222999/1/FPGA Compile Error.txt Hello, &nbsp; The key will of course be to isolate differences between your machines. &nbsp; I wonder if the following more specific&nbsp;language setting could be the lingering problem.&nbsp; LabVIEW is a non-unicode program, and there is a language setting in Windows (at least ...

Cross-compiling error when compiling 2.6.1...
I come across the following error: checking for chflags... configure: error: cannot run test program while cross compiling See `config.log' for more details. make-3.81[1]: *** [/nobackup/garrcoop/python_upgrade/contrib/python/obj-mips32/Makefile] Error 1 make-3.81[1]: Leaving directory `/nobackup/garrcoop/python_upgrade' make-3.81: *** [all] Error 2 The blurb from configure that does this test says: # On Tru64, chflags seems to be present, but calling it will # exit Python Basically this testcase (while valid for Tru64) doesn't work with many cross-compilation environments. Cou...

Web resources about - Compile Warnings and Errors - comp.dsp

Ballistic Missile Early Warning System - Wikipedia, the free encyclopedia
Site I- A United States Air Force facility at Thule Air Base , Greenland , ( 76°34′08″N 68°19′05″W  /  76.569°N 68.318°W  / 76.569; -68.318 ...

WARNING: Zeus Trojan Using Facebook Login Pages As Bait To Target Credit-Card Info
The Zeus Trojan is on the prowl again, hungry for credit-card information and other personal data, and Facebook is being used as the bait. continued… ...

'Jobs will go': Outgoing ABC boss Mark Scott's dire warning to Malcolm Turnbull
The outgoing head of the ABC says there will be "significant job losses" if Prime Minister Malcolm Turnbull fails to continue nearly $90 million ...

WA weather: Flood warnings and storms for Midwest Gascoyne region
PARTS of WA are bracing for a very wet Easter, with flood warnings and thunderstorms issued for parts of the Perth metropolitan area and across ...

WA weather: Flood warnings and storms for Midwest Gascoyne region - PerthNow Search Search
PARTS of WA are bracing for a very wet Easter, with flood warnings and thunderstorms issued for parts of the Perth metropolitan area and across ...

Perth weather: large parts of WA, including city, get warning for heavy rain
Residents of the Perth metropolitan area, along with the South West, Lower South West, Great Southern, Goldfields Midlands and Midwest Gascoyne ...

Perth weather: large parts of WA, including city, get warning for heavy rain
Residents of the Perth metropolitan area, along with the South West, Lower South West, Great Southern, Goldfields Midlands and Midwest Gascoyne ...

Gmail adds Safe Browsing warnings for nefarious links, state-sponsored attacks, more
Gmail introduced a feature last month that warns users before sending and receiving emails from insecure addresses. Today, it’s announcing a ...

Gmail beefs up security through warnings
... of these to get an upgrade is Gmail, which now has improved in-email link protection.The security enhancement take the form of a new warning ...

Warning: Anyone can access sensitive info on your iPhone without even unlocking it
Apple refused to unlock the San Bernardino shooter's iPhone for the FBI, but the Bureau might be interested to learn that there's some seriously ...

Resources last updated: 3/30/2016 5:22:59 AM