FS: CDRW/DVD Drives, SCSI/IDE Hard Drives, & SCSI Controllers
NOTE: I can meet with you if you're in the Austin area; otherwise, shipping
& handling will cost a flat rate of $10.00 for UPS Ground.
HP 2X/6X CDRW IDE Drive Model #: C4380-45000. Asking $5.00
To see a pic of the drive: http://www.ccci.net/ForSale/HP_CDRW.JPG (Sorry,
not the greatest photo I've taken!)
Pioneer 10X DVD IDE Drive Model #: DVD-104S. Asking $20.00
Here's the same drive on eBay:
To see a pic of the drive: http://ww...FS/FF SCSI Interface, 9GB SCSI hard drive
I no longer have need of:
* 1 x Castle Technology EtherSCSI Interface. Looks like this one:
* 1 x Seagate Cheetah 9GB SCSI hard drive ST39103LW
Comes with 68 to 50 pin adaptor and optional length of 50-way ribbon
cable. It's noisy but I think that's normal for SCSI drives.
If you're interested in either or preferably both of the above, please
make me an offer from zero pounds upwards. Buyer pays postage or
collects from Cambridge.
My email address...FS: Apple IIe + Dual 5.25 Drive + Mouse Interface + SCSI + Hard Drive
I'm selling an Apple IIe equipped with the dual 5.25" drive, floppy
drive interface card, standard 80-column card, mouse interface card,
Kensington System Saver fan, a SCSI card (Rev C I believe, but I'll
have to check again), and a 40 MB external SCSI drive. No monitor
included (I don't even have one).
Tested it to work booting from the hard drive, and reading the catalog
of 5.25" disks on both the floppy drives. However, I have not tested
it exhaustively, and have to sell it as-described.
Cases are quite yellowed, but I have not tried retr0brite on them (I...The SCSI controller does not see the SCSI drives?
I have two maxtor atlas IV 10K 36GB on the adaptec 39320R SCSI
controller and when i bootup it does not see either of the drive. my system
Iwill dp533 dual xeon motherboard
2 x 2.4 GHZ xeon processors
PNY QuadroFX 1000
4x 512MB kingston hypex pc2700
adaptec 39320R SCSI RAID controller
2x Maxtor atlas IV 10K 36GB
adaptec 1200A Ide RAID controller
2x 200GB WD IDE drives
pioneer DVD 4x Rcorder
I set the drive with the terminator to ID0
and the second drive in the chain ID1
I would appreciate any help with this.
...Virtual SCSI drive or IDE drive
I will be installing Fedora 10 VM (VMware workstation) on my laptop.
What is advantage of a SCSI virtual disk versus and IDE virtual disk?
How can I reclaim some of the (unused) disk space for the host operating
Thank you in advance.
Neil Jones wrote:
> I will be installing Fedora 10 VM (VMware workstation) on my laptop.
> What is advantage of a SCSI virtual disk versus and IDE virtual disk?
> How can I reclaim some of the (unused) disk space for the host operating
> Thank you in advance.
Not much diff...SCSI as C drive not IDE as C drive
I have trawled Google Groups for an answer but have not got a
definitive one so I am posting this question myself.
I have a server with 3 SCSI drives. I have added an IDE drive (file
drive) to the server also. I am currently installing SBS2003 and when
doing so it brings up the IDE drive as the C drive which is not what I
want. I want one of the SCSI drives to be the C drive.
I read articles here that say this is normal and to overcome it I have
to put SCSI above IDE in my boot order within the BIOS. The problem I
have is that it is an AWARD BIOS and it does not have SCSI in it's 3...Extract Firmware From SCSI Hard Drives And Tape Drives
Does anyone know of a program that can be used to extract firmware from
SCSI hard drives and tape drives? I would also need a program that would
allow me to flash new SCSI hard drives and tape drives with the extracted
firmware. If anyone knows of a utility like this I would appreciate it.
> Does anyone know of a program that can be used to extract firmware from
> SCSI hard drives and tape drives? I would also need a program that would
> allow me to flash new SCSI hard drives and tape drives with the extracted
> firmw...What is the best hard drive software for extra large scsi drives?
What is the better software.
ICD or the Atari version.
I want to hook up a 9 gig drive and not have 32 meg sections.
On Tue, 22 Mar 2005 00:25:15 -0600, Tiny wrote:
> What is the better software.
> ICD or the Atari version.
> I want to hook up a 9 gig drive and not have 32 meg sections.
I'd go with Uwe Seimets "HDDriver" software. It rocks and is well worth
the money spent.
on Tue 22-03-2005 00:25 Tiny@tim.net wrote:
>What is the better software.
>ICD or the Atari version.
>I want to h...How to read a Raid 5 scsi drive from a single scsi controller?
I am removing one of the raid 5 hard drive from a server and install
it on a single scsi on a work station to see if I can access the data,
but when I click on the drive it says: can not read, wanna to format?
Any help is appreciated.
It's not in any format easily visible, although you might be able to
put the drive on a UNIX system and look at it raw. But even if you
could, you aren't likely to be able to see anything useful. In a raid
5 set, the user data and error-correcting parity info is spread out
across all the drives in the raid set. In the absence of the other
driv...SATA hard disk & 2 DVD drives
I'm building a new computer with an SATA hard disk for the operating
system. My only IDE devices are a DVD burner and a DVD ROM.
I think it would be best to put one DVD drive on each IDE port, each
with it's own 80-wire cable. It would add clutter inside the computer
though, and I don't yet have a second 80-wire cable.
Both computer ports support Ultra DMA. Any thoughts on speed
difference using one or both ports for my DVD drives? I assume it
wouldn't matter for single-DVD drive use but that it might if I'm
copying a DVD from the ROM to the burner.
Than...Adding hard drives to an existing SCSI controller
I'm dealing with an OpenServer 5.0.6 system, which is a new OS for me.
I need to add SCSI drives to an existing system, which already has
boot drives, and find that the "mkdev hd" utility insists that I know
a lot of information about the existing hardware, including LUN's and
Is there a graceful way to extract that information from the boot
logs, or a readable configuration file somewhere? I've gotten spoiled
by the BSD UNIX style "fdisk -l" command to list the available drives
on other UNIX or Linux systems. The system has multipls SCSI
controller...SCSI and IDE hard drive mounting problems
I got a blue and white G3 450 tower on ebay. It came with I think is
the Single Channel Ultra2 LVD SCSI Card (Single) with 68 pin hook up
and a 9 GB hard drive with OS 9.2.2 on it set to SCSI ID #0. I then
install two IDE hard drives with OS 10.3 and OS 9.2 on them that I
had gotten out of my other B & W 300 tower when I uped the capacity of
it=92s hard drives. The drives are small 6 and 4 GB only. It booted from
the SCSI OS 9.2.2 drive and mounted all the hard drives but froze
after I opened a folder the first time all three drive were in and
hooked up. I restarted and it booted again wi...scsi hard drive clicks when computer is booting up
I have a question. I have a 29160 scsi card and a cheetah 36gig hard drive
that clicks whenever I am starting the computer cold, it only clicks cold,
because if I do a warm reboot I get no clocking. Is this normal? I have
changed hard drives and get the same from both?
...scsi dvd writers & tape drive
anyone know of other scsi dvd writers (RW or RAM)?
the ones I've found so far are from Pioneer & Panasonic.
I'm also looking at a scsi tape drive from sony SDT-11000. any comments
on this. any alternates to it?
which method is better for backing up data, DVD or tape?
is dvd faster than tape on backup?
Dilbert Firestorm wrote:
> hey all
> anyone know of other scsi dvd writers (RW or RAM)?
> the ones I've found so far are from Pioneer & Panasonic.
> I'm also looking at a scsi tape drive from sony SDT-1100...