I bought a new ViewSonic VA2226w monitor and text on the 
screen appears more blurry than on my conventional aspect 
ratio ViewSonic monitor. Is this because the 1680 x 1050 
widescreen aspect ratio? 

On Sun, 15 Feb 2009 08:45:59 -0600, "Peter Olcott"
<NoSpam@SeeScreen.com> wrote:

>I bought a new ViewSonic VA2226w monitor and text on the 
>screen appears more blurry than on my conventional aspect 
>ratio ViewSonic monitor. Is this because the 1680 x 1050 
>widescreen aspect ratio? 
>


If you are using the original analog cable that came with
that monitor, it is thin, low quality and must be replaced
for optimal results even at the native 1680x1050 resolution.

At that resolution, a higher than average analog cable, or
DVI cable, needs be used to retain maximum crispness.  If
you happen to be using an OS with a font-smoothing feature,
that will also increase blur on text.

On Sun, 15 Feb 2009 08:45:59 -0600, "Peter Olcott"
<NoSpam@SeeScreen.com> wrote:

>I bought a new ViewSonic VA2226w monitor and text on the 
>screen appears more blurry than on my conventional aspect 
>ratio ViewSonic monitor. Is this because the 1680 x 1050 
>widescreen aspect ratio? 
>


If you are using an older integrated video chipset, it's
slow ramdac can also account for the problem, but primarily
it would be the original, included cable if that is what
you're using.

Peter Olcott wrote:
> 
> I bought a new ViewSonic VA2226w monitor and text on the
> screen appears more blurry than on my conventional aspect
> ratio ViewSonic monitor. Is this because the 1680 x 1050
> widescreen aspect ratio?

No.
The image will be sharpest running at the native resolution with a digital signal input.
If you are using an analog signal check the auto adjust function.
If you are running at non native resolution you might be able to adjust the sharpness with the on screen display settings.

-- 
                   Mike Walsh

Peter Olcott wrote:
> I bought a new ViewSonic VA2226w monitor and text on the 
> screen appears more blurry than on my conventional aspect 
> ratio ViewSonic monitor. Is this because the 1680 x 1050 
> widescreen aspect ratio? 
> 
> 

What GPU are you using? Have you got the latest drivers for your GPU?
Did you install the drivers for that monitor?
Have you checked the refresh rate on the display properties?
Are you using digital or analog cables?

On Sun, 15 Feb 2009 08:45:59 -0600, "Peter Olcott"
<NoSpam@SeeScreen.com> wrote:

>I bought a new ViewSonic VA2226w monitor and text on the 
>screen appears more blurry than on my conventional aspect 
>ratio ViewSonic monitor. Is this because the 1680 x 1050 
>widescreen aspect ratio? 
>

I seem to have overlooked your topic title previously.

You wrote "ClearType font smoothing is not working
correctly", then you described the text being more blurry.

The purpose of ClearType is to make text blurry!  If you
don't want blurry text, disable ClearType.  Some claim it
makes text more readable, and that can be true because what
it does is takes a small thin line and makes it wider and
more smooth through that blurring.

ClearType can be adjusted if you want less of an effect but
don't want it completely disabled. 

Online  Tuner -
http://www.microsoft.com/typography/cleartype/tuner/step1.aspx

Offline Tuner -
http://www.microsoft.com/typography/ClearTypePowerToy.mspx

I vaguely recall seeing a different offline tuner somewhere,
but either of these is a good start.

I don't think that this is the issue, at least the symptoms 
are not consistent with this being the issue. On some things 
ClearType font smoothing is working perfectly, on other 
things black text is appearing with red edges. I know how 
ClearType works, (sub pixel rendering) but, in the past 
black text always appeared to the naked eye as being purely 
black.

Using an inferior connection cable would seem to produce a 
signal strength problem, and the actual case appears to be a 
(sub pixel rendering) pixel alignment problem. Issues such 
as this would seem to be related to the unconventional 
aspect ratio. If (for example) the display data is 
graphically stretched (after it was rendered) to accommodate 
the wider screen, this would be expected to cause the 
precise problem that I am having.

I have another ViewSonic monitor that has no problem at all 
using the out-of-the-box cable.


"kony" <spam@spam.com> wrote in message 
news:8vngp4dtli4n3dp2sq9qnt26g8513ohjq9@4ax.com...
> On Sun, 15 Feb 2009 08:45:59 -0600, "Peter Olcott"
> <NoSpam@SeeScreen.com> wrote:
>
>>I bought a new ViewSonic VA2226w monitor and text on the
>>screen appears more blurry than on my conventional aspect
>>ratio ViewSonic monitor. Is this because the 1680 x 1050
>>widescreen aspect ratio?
>>
>
>
> If you are using the original analog cable that came with
> that monitor, it is thin, low quality and must be replaced
> for optimal results even at the native 1680x1050 
> resolution.
>
> At that resolution, a higher than average analog cable, or
> DVI cable, needs be used to retain maximum crispness.  If
> you happen to be using an OS with a font-smoothing 
> feature,
> that will also increase blur on text. 

On Tue, 17 Feb 2009 04:47:44 -0600, "Peter Olcott"
<NoSpam@SeeScreen.com> wrote:

>I don't think that this is the issue, at least the symptoms 
>are not consistent with this being the issue. On some things 
>ClearType font smoothing is working perfectly, on other 
>things black text is appearing with red edges. I know how 
>ClearType works, (sub pixel rendering) but, in the past 
>black text always appeared to the naked eye as being purely 
>black.
>
>Using an inferior connection cable would seem to produce a 
>signal strength problem, and the actual case appears to be a 
>(sub pixel rendering) pixel alignment problem. Issues such 
>as this would seem to be related to the unconventional 
>aspect ratio. If (for example) the display data is 
>graphically stretched (after it was rendered) to accommodate 
>the wider screen, this would be expected to cause the 
>precise problem that I am having.
>
>I have another ViewSonic monitor that has no problem at all 
>using the out-of-the-box cable.


As others have written, you need to make sure the display
adapter is using the monitor's native resolution.

You should also try the auto-adjust feature on the monitor's
menus, through it's OSD.

Otherwise, consider just trying a different cord...
considering I have one of these monitors and the original
cord did cause problems while a different analog cord came
much closer to what would've been easily accomplished with
DVI instead.