CORRECTION : Can't connect to Xserver SHOULD BE Can't connect to XVNCserver
I've got a RH 9 machine running, with x/kde.
From 2 different Windows machines (Win2k and Win98), I can't seem to
connect to the vncserver on the RH system. (failed to connect to
server is displayed, when I connect from the client)
After looking at the System Service Configuration tool in KDE, the
Status for vncserver shows "Xvnc is stopped". When I restart the vnc
service, "VNC server start was successful is displayed in a message
box, yet the staus still shows "Xvnc is stopped"
What am I doing wrong ?
-----BEGIN PGP SIGNED MESSAGE-----
On 21 May 2004 11:11:29 -0700, Tony C <email@example.com> wrote:
> I've got a RH 9 machine running, with x/kde.
> From 2 different Windows machines (Win2k and Win98), I can't seem to
> connect to the vncserver on the RH system. (failed to connect to
> server is displayed, when I connect from the client)
> After looking at the System Service Configuration tool in KDE, the
> Status for vncserver shows "Xvnc is stopped". When I restart the vnc
> service, "VNC server start was successful is displayed in a message
> box, yet the staus still shows "Xvnc is stopped"
> What am I doing wrong ?
On the server machine, go to the .vnc directory of the user who started
vncserver. In that directory should be a log file which may contain
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Lin...GPIB instruments connected through Agilent USB/GPIB Interface can bee seen in MAX but can't communicate in labview
I have an Agilent 82357B USB/GPIB Interface connected to my computer.
Attached to that, I have two lock-in amplifiers (an SR830, and an SR
850). I would like to be able to communicate with them through GPIB.
I have downloaded and installed the software for the Agilent device
(Agilent IO Control), and I can see the interface and the two devices
in that software. Here's what is configured in this software, that I
- The VISA interface ID is GPIB0, and its address is 0
- The VISA addresses of the devices are GPIB0::4::INSTR and GPIB::12::INSTR, and the GPIB addresses are 4 and 12
In Measerment and Automation Explorer (MAX), I made sure that the
Passport for Tulip box was checked. Once it was, I could see the
devices in the Configuration window under Devices and Interfaces ->
Miscellaneous VISA Resources. There, I see GPIB0::INTFC, GPIB0::4::INSTR and GPIB::12::INSTR.
I can right click on either of the instruments, and "Open VISA Test
Panel" where I am successfully able to send commands and read from both
HOWEVER, when I am running an actual LabView program, I am unable to communicate with the devices.
For example, when I try to communicate to the devices through VISA,
using the 'Basic Serial Write and Read.vi' (while VISA Resource Name is
GPIB0::12::INSTR), I get an error:
Error -1073807331 occurred at Property Node (arg 2) in VISA Configure Serial Port (Instr)...If i have a labview .vi file(and labview) but i want to open it in a computer that doesn't have labview, how would i do it??
Okay, i have a made a labview program and save it as.vi.
Let's say that it is a program that when opened and you hit run it shows a sine wave.
Now if i wanted to open up the program without Labview, ( i don't need to modify it) on a computer that doesn't have labview. How would i go about doing this??
...From Labview 7.1 help, can't load example vi's
Quick question:<br><br>When in Labview 7.1 Help, I can no longer load examp=
le vi's. I receive a message: "An error occurred ? The NI HelpServer could=
not be found."<br><br>A search on the NI website finds this issue listed &=
a solution given for Labview version 7.0. It is suggested to:<br><br>Solu=
tion: NI HelpServer is one of two services which open TCP/IP ports to commu=
nicate with other NI applications running on your computer, such as the NI =
Example Finder and the LabVIEW Help. By default, LabVIEW 7.0 will launch th=
is serv...Can I use LabVIEW to load data directly into system memory? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Win32 function to read the data from the card
Can I use LabVIEW to load data directly into system memory from a VI? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Call Library function to read the data from the card and now I want it to go directly to system memory.
The data is being received at 1Mbps.
1.You will most likely crash your system trying to write meg's/sec of
data to system memory. LabVIEW has it's own memory manager and manages
data for you. If you getting data to LabVIEW, I hope for the
processinfg purposes. You didn't menti...can't open labview help
I can't open Labview help file (.chm)
When open it from link text in pdf bookshelfit it shown an error popup as show in attach picture.
please help, how to fix it.
Can you find the help at the path given in the message (<LabVIEW>\help\help.chm)? Were you ever able to open the help? What happens when you try to open the help from LabVIEW?
...Client can't connect to the default port, but can connect to other ports
I am not able to connect to the sshd running on default port, but if I
run a new sshd at a specific port, I can connect to it. Here are debug
outputs from the two calls. syslogs don't show anything either. Can
someone please help me solve this problem.
[namit@namit-pc ~/.ssh]$ ps -ef | grep sshd
root 5114 1 0 Aug12 ? 00:00:05 /usr/sbin/sshd
root 19131 1 0 Aug17 ? 00:00:00 /usr/sbin/sshd -p 10111
namit 30922 19148 0 09:52 pts/6 00:00:00 grep sshd
[namit@namit-pc ~/.ssh]$ ssh -v localhost
OpenSSH_3.6.1p2, SSH protocols 1.5/2.0, OpenSSL 0x0090701f
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug1: Rhosts Authentication disabled, originating port will not be
debug1: Connecting to localhost [127.0.0.1] port 22.
debug1: Connection established.
debug1: identity file /home/namit/.ssh/identity type -1
debug1: identity file /home/namit/.ssh/id_rsa type -1
debug1: identity file /home/namit/.ssh/id_dsa type 2
debug1: Remote protocol version 1.99, remote software version
debug1: match: OpenSSH_3.6.1p2 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.6.1p2
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->s...Can't get 'CONNECT' response
I have an NEC laptop with an AGERE modem.
I have a comms program which requires a CONNECT response after connecting to
a remote modem. The modem dials and connects correctly but there is no
response string. Have tried ATQ0, ATV1 but the modem still does not respond.
Any ideas welcome!
"Arthur Richards" <firstname.lastname@example.org> wrote in message
> I have an NEC laptop with an AGERE modem.
> I have a comms program which requires a CONNECT response after connecting
> a remote modem. The mode...Re: LabVIEW and LabVIEW RT?
I will try to illustrate it with an example since it all will depend on the type of application you would like to implement. Let's say you would like to implement an application where you log data, maybe exchange data with databases and you acquire a bunch of data points at a time not performing any type of control and where high determinism is not needed. In this case LabVIEW for Windows work great. If you on the other hand would like to implement a closed-loop application where you need high determinism and reliability and will acquire data point by point you would use LabVIEW RT which is an add-on to LabVIEW. I.e. you need LabVIEW + LabVIEW RT when developing an RT application.
...Labview can't see global channels
This is the first time I have used DAQmx, so apologies if I'm doing something really stupid...
I'm using a PCI-6221. I have configured a number of global virtual channels. However, when I try to access any of them in Labview, they are not there.
If I use Get Channel Information.vi, it always returns error -10003. If I try AI Acquire Waveform.vi, running it as a stand-alone vi, when I click on the channel input selector and choose Browse, I see "Select Names", and an empty listbox.
This is a brand new install of Labview 7.1. I'm using Nidaq 7, version...I can't find my fieldpoint VIs in Labview
I just installed Labview 8.5 and I have a project to convert that uses Fieldpoint VIs. I can't figure out what to install to get Labview to recognize the VIs already embedded in the project. I have Instaled Fieldpoint 5.0, but I didn't see a selection for Labview 8.5 support.
I have the runtime engine for LV 8.5 installed on the target machine. I'm assuming I'll also have to install something for Fieldpoint..
Also, from what I read, it looks like the Fieldpoint Explorer has been integrated into Max? I will just be able to load my .iak file somehow?
Thanks for contacting National Instruments.
Guenter is right in that the Fieldpoint 5.0 drivers were released with a previous version of LabVIEW, and not the recent version, LabVIEW 8.5. The link he has provided to the Device Drivers from August 2007 is the only place to obtain the Fieldpoint 6.0 drivers without the CD that accompanies the actual hardware.
As far as what you have mentioned about .iak files, I think that you are referring to something that is explained <a href="http://digital.ni.com/public.nsf/allkb/C7127F390359977C8625730200716EE4?OpenDocument" target="_blank">here</a>. <a href="http://digital.ni.com/public.nsf/allkb/2EF82CA062692F4886257325008067BC?OpenDocument" ...Re: LabVIEW QA
Chroma, I am a little unclear about your question. You should be able to use BuildTargetBuildSpecification to build all or selected build specifications within a project. You could build a program to call this VI for different projects and build specifications.Are you looking to find out all builds present in a project, similar to how the other example you pointed too adds files? If so, have a look at the attached screen shot. This opens the project, gets all descendents of type "EXE" (application builds), and creates an array of their names. If you don't specify "EXE", it will return all project descendents (builds, VIs, libraries, etc...). The help for the "Get All Descendents" method lists other possible types that you can specify besides "EXE" that might be useful, such as "VI", "DLL", "Source Distribution" and "Installer".I hope that helps!
...Can't connect to Express 10g 'homepage'
(I hope this is the right ng for this post... if not please advise).
I'm a developer who uses MySQL but thought I'd try the new Oracle Express.
The install went ok on Debian testing but when I try to get to:
localhost:8080/apex in FireFox I get a 'connection refused' pop-up.
The lsnrctl command works ok.
I do have Apache2 running but that looks at port 80 so there should be no
conflict. I can get to localhost:631 for cups without issue.
If anyone has any suggestions I'm all ears. If not, I'll just give up the
ghost and go back to my old stand-by.
A...py2exe service doesn't work, can't connect to service controller ?
I'm trying to get a simple service to work with py2exe and python 2.3
I get this error when I start it (after registering it)
The description for Event ID ( 240 ) in Source ( UMXWIN32SVC ) cannot be found. The local
computer may not have the necessary registry information or message DLL files to display messages
from a remote computer. The following information is part of the event: 1063, The service process
could not connect to the service controller..
I then tried the sample MyService and I get the same problem. After building it, I then
register it then try to start it, but it f...Why windows layer can't connect to the RT system
Currently, we have developed the software including the windows layer, Real-Time(RT) layer and FPGA layer using cRIO. However, one problem occurs recently. It is the builded window layer software can't connect to the RT system in some PCs and it is working well in some other PCs.
Our configuration: cRIO 9014 controller, RIO 2.1.3, Labview 8.2, Labview FPGA 8.2, Labview 8.2 Real-Time.
What's wrong with our software? We have tried build the windows layer on the 2 PCs separatedly, however, the two builded softwares all just can connect to RT system in one PC and other PCs still can't connect with RT system.
We have using cRIO for a long time and this problem just occurs recently after we have updated our controller from 9004 to 9014 and RIO from 2.1.1 to 2.1.3.
The operation system in these two controller 9004 and 9014 are different. Is this the root cause of this problem? How to solve this problem?
Are the access rights correctly set in MAX? (Are they the same for all PC's)
The builded software ought to be avaiable to connect to the RT system for all PCs even not install Labview, isn't it?
In that case, it should has not relationship with the MAX setting, right?
MAX is used to configure the cRIO driver. cRIO driver installation installs MAX. For a deployed system you require:The RIO driver.The LV run-time.MAX for configuration of the HW and driver
...I am trying to make a Calculator in LabVIEW. I can't able to...
I am trying to make a Calculator in LabVIEW. I can't able to display
decimal point in the output display and i can't able enter floating
point numbers? Please help me.
I am new to LabVIEW. Please provide the detailed information. Thanks
First thing to check is the representation of the indicator. Right
click on it and move the mouse to representation. If it's not eithe
EXT, DBL, or SGL, then the indicator is set only for integers.
...Can't debug LabVIEW built shared library
I'm using LabVIEW 8.20 and have built a shared library containing a single VI that will be called from C/C++.
In the build specification, I've enabled debugging and marked 'Wait for debugger on launch'.
I start a C, C++ or LabVIEW application that calls the VI. Now, the "One or more VIs are paused..." message is displayed.
From the Project Explorer window I select Operate->Debug Application or Shared Library... and tries to connect to the application.
The "Failed to connect to remote application" is displayed each time.
I've followed every step in the Debugging Applications and Shared Libraries section of the LabVIEW Help.
If I turn the VI into an Application instead of a Shared Library there's no problem debugging it.
...can I make Labview Exe which can be executed i A PC which is not having labview
I am using lab view 7.1. Can we make a exe or installer, which can be run in a PC which is not having labview installed. If that can be done, please let me know which edition i have to use and how can i do
Under Tools-Build application or shared library, you can build your .exe
file. You also have to option to include an installer which installs the
necessary LabView dll's. I have the Pro version, however.
"budda" <email@example.com> wrote in message
> I am using lab view 7.1. Can we make a exe or installer, which
> can be run in a PC which is not having labview installed. If that can be
> done, please let me know which edition i have to use and how can i do
> with Regards,
...Cisco 1811 K9- VPN clients can connect, but can't connect or ping to computers
I have an 1811 that I use as a firewall. Last Friday I configured a
site to site VPN for a vendor to do offsite backups. Ever since then,
remote users have reported that they successfully connect their VPN
clients, but all traffic (email, remote desktop) is denied. Any ideas?
On Jan 30, 3:30=A0pm, Pappy <sodapopsa...@gmail.com> wrote:
> I have an 1811 that I use as a firewall. =A0Last Friday I configured a
> site to site VPN for a vendor to do offsite backups. =A0Ever since then,
> remote users have reported that they successfully connect their VPN
> clients, but all traf...Integration of two different labview infinity projects and how to import labview's calcutation into flash animation
1) I have a labview project for strength gauge using flex sensor and another labview project on tracking the brightest light intensity of image captured by webcam.
How do i integrate both together?
2) How do I show simple animations of the measurement result?
For e.g if I am doing a measurement and position tracking of a bow and arrow game using labview program,
how do i show the bulleye's and whether the user has hit on the bull's eye?
Is it possible to import flash animation of the bull's eye? How do i do that?
this may be an solution for your first question.
the project file of LabVIEW is a XML file.
you can open it with a txt editor, such as notepad, ultraedit, and so on.
or a XML editor is prefer.
then try to integrate (copy and paste) the part of the content two project.
it maybe works. i think.
...can ping, can't connect
Ok, I have a sever box running Debian stable with a 2.6 kernel (686).
It was working fine.
Suddenly after about a month up time it stopped, I think it was an IP
ipdate form the cable modem but whatever happened I rebooted and when it
came back up it cuold no longer make connections.
It is now sitting behind my emergency windows box ICS.
It can ping www.google.com with no problem but links www.google.com sits
there with "Making connection".
I did have it running a firewall that caused no probs for outbound
connections like that but i have turned that off.
It wont let me ssh in from either side.
It happily DCHPs from the modem or the windlw box, although it wont
route through the modem for some reason, but that is for later.
Does anyone have any idea what is going on and what I can do to fix it?
> Ok, I have a sever box running Debian stable with a 2.6 kernel (686).
> It was working fine.
> Suddenly after about a month up time it stopped, I think it was an IP
> ipdate form the cable modem but whatever happened I rebooted and when it
> came back up it cuold no longer make connections.
> It is now sitting behind my emergency windows box ICS.
> It can ping www.google.com with no problem but links www.google.com sits
> there with "Making connection".
> I did have it running a firewall that caused no probs for outbound
> connections like that but i have turned that off.
&g...Can Connect, But Can't Surf
I'm using Aztech 56k USB modem on the Fedora. I download the driver for this
modem and seems to set it up successfully since i can dialup and login to
the ISP. But the strange thing is, whatever address that I type in on the
browser, I just can't get to the web server.. even I "ping yahoo.com" it
told me "Unknown Host".
So where should I diagnose the problem? I suspect maybe is the DNS setup
error (the current DNS setting is "Automatic ....") any others??
max <firstname.lastname@example.org> wrote:
> Hi guys,
> I'm using Aztech 56k USB modem on the Fedora. I download the driver
> for this modem and seems to set it up successfully since i can
> dialup and login to the ISP. But the strange thing is, whatever
> address that I type in on the browser, I just can't get to the web
> server.. even I "ping yahoo.com" it told me "Unknown Host".
Does it tell you that immediately? No name server or no default route.
Does it tell you that after a short time? Wrong name server.
Does it tell you that after several minutes? Wrong default route.
Clifford Kite Email: "echo email@example.com|rot13"
PPP-Q&A links, downloads: http://ckite.no-ip.net/
/* I gave up on politics when no matter who I voted for, I regretted it.
* -- Pepper...and Salt, WSJ */
You should have an entry for your ISP nameserver in the
/etc/resolv.conf file. For examp...Can't cd , can't use wildcard
I am running Windows 2000 service pack 4.Whenever I try to "cd" into some of
the directories(which exist), I get an "Invalid directory". I can use to get
into few of the directories(using cd) but for other it just says "Invalid
Moreover, I can't use any wildcard characters..(*, ? etc) at all..
Any idea what is wrong?
On Sun, 31 Aug 2003 17:13:52 GMT, Arun Goel <firstname.lastname@example.org>
wrote the following to comp.os.msdos.misc:
> Hi ,
> I am running Windows 2000 service pack 4.Whene...How can I insert a required subVI that is required but Labview won't accept it?
I am trying to use a VI named Termperature Monitor that was provided in
the Labview 7 library included on the CD but it seems to be
missing subVIs. I located the subVIs on the cd and attempted to insert
them into the block diagram where the question marks are. Despite the
fact that the names of the subVIs match what Labview expects, the app
won't accept them. Is there a way to force them to accept the subVI
that I picked?
Have you installed LabVIEW? and if yes, aren't the example vi's on your harddrive now? How are you "attempting to insert them"? When LabVIEW ...