f



Differences in CIN management between Labview 5.0 and Labview 7.1 ? #3

Hi, 
 
I'm using a VI on a two photon microscope. It steers the laser beam in the sample (quite the same way as a TV scan, scanning a fast line on the X axis, then moving the line down) controlling two mirrors by the PCI-MIO-16E-4 Multifunctions card on traditional DAQ and at the same time it serves as the acquitision through a non-NI DSP Multifunction-board with on-board buffers and hight data throughput (70 Mb/s).
 
It is this part of the program which gives us strong headaches since we have upgraded to a new PC.
On the old machine we used Win2k and Labview 5.0; on the new machine we planned to use WinXP Pro and Labview 7.1.
The acquisition part of the VI uses 2 CINs. One is used to configure the FPGA on the Multifunctions board at initialization.
The second CIN reads he buffers received from the board and puts them into the shape of an image.
 
Now since we tried in WinXP Pro and Labview 7.1, we get some kind of weird bugs. Either there is a big problem concerning the synchronization of the mirros with the acquisition or with the image reconstruction. We have already tried :
 
1. Putting everything back into the old machine to verify there has not been any damage to the boards. OK
2. Using the boards in the new machine but with Win2000 and Labiew 5.0, just to be sure that there are no conflicting elements in the hardware. OK
 
As we wanted to check everything slowly but surely we then installed LV 7.1 on the new machine but still with Win2k. And here the problem appears !
First we thought the drivers for the Multifunctions board (ATEME Adr128C6x) were not compatible with WinXP Pro, so at this point we were quite surprised to notice the problem seems to be caused by the upgrade from LV 5.0 to 7.1 !
 
Now, finally my question is : Are there any major changes in how Labview handles CINs between LV5.0 and 7.1 ?
Can the problem
0
x9561 (148467)
1/26/2006 10:12:55 AM
comp.lang.labview 35213 articles. 1 followers. vasusachin24 (1) is leader. Post Follow

0 Replies
473 Views

Similar Articles

[PageSpeed] 6

Reply:

Similar Artilces:

Differences in CIN management between Labview 5.0 and Labview 7.1 ? #5
Hi,   I'm using a VI on a two photon microscope. It steers the laser beam in the sample (quite the same way as a TV scan, scanning a fast line on the X axis, then moving the line down) controlling two mirrors by the PCI-MIO-16E-4 Multifunctions card on traditional DAQ and at the same time it serves as the acquitision through a non-NI DSP Multifunction-board with on-board buffers and hight data throughput (70 Mb/s).   It is this part of the program which gives us strong headaches since we have upgraded to a new PC. On the old machine we used Win2k and Labview 5.0; on the new machine we planned to use WinXP Pro and Labview 7.1. The acquisition part of the VI uses 2 CINs. One is used to configure the FPGA on the Multifunctions board at initialization. The second CIN reads he buffers received from the board and puts them into the shape of an image.   Now since we tried in WinXP Pro and Labview 7.1, we get some kind of weird bugs. Either there is a big problem concerning the synchronization of the mirros with the acquisition or with the image reconstruction. We have already tried :   1. Putting everything back into the old machine to verify there has not been any damage to the boards. OK 2. Using the boards in the new machine but with Win2000 and Labiew 5.0, just to be sure that there are no conflicting elements in the hardware. OK   As we wanted to check everything slowly but surely we then installed LV ...

Differences in CIN management between Labview 5.0 and Labview 7.1 ? #7
Hi,   I'm using a VI on a two photon microscope. It steers the laser beam in the sample (quite the same way as a TV scan, scanning a fast line on the X axis, then moving the line down) controlling two mirrors by the PCI-MIO-16E-4 Multifunctions card on traditional DAQ and at the same time it serves as the acquitision through a non-NI DSP Multifunction-board with on-board buffers and hight data throughput (70 Mb/s).   It is this part of the program which gives us strong headaches since we have upgraded to a new PC. On the old machine we used Win2k and Labview 5.0; on the new machine we planned to use WinXP Pro and Labview 7.1. The acquisition part of the VI uses 2 CINs. One is used to configure the FPGA on the Multifunctions board at initialization. The second CIN reads he buffers received from the board and puts them into the shape of an image.   Now since we tried in WinXP Pro and Labview 7.1, we get some kind of weird bugs. Either there is a big problem concerning the synchronization of the mirros with the acquisition or with the image reconstruction. We have already tried :   1. Putting everything back into the old machine to verify there has not been any damage to the boards. OK 2. Using the boards in the new machine but with Win2000 and Labiew 5.0, just to be sure that there are no conflicting elements in the hardware. OK   As we wanted to check everything slowly but surely we then installed LV ...

Differences in CIN management between Labview 5.0 and Labview 7.1 ?
Hi,   I'm using a VI on a two photon microscope. It steers the laser beam in the sample (quite the same way as a TV scan, scanning a fast line on the X axis, then moving the line down) controlling two mirrors by the PCI-MIO-16E-4 Multifunctions card on traditional DAQ and at the same time it serves as the acquitision through a non-NI DSP Multifunction-board with on-board buffers and hight data throughput (70 Mb/s).   It is this part of the program which gives us strong headaches since we have upgraded to a new PC. On the old machine we used Win2k and Labview 5.0; on the new machine we planned to use WinXP Pro and Labview 7.1. The acquisition part of the VI uses 2 CINs. One is used to configure the FPGA on the Multifunctions board at initialization. The second CIN reads he buffers received from the board and puts them into the shape of an image.   Now since we tried in WinXP Pro and Labview 7.1, we get some kind of weird bugs. Either there is a big problem concerning the synchronization of the mirros with the acquisition or with the image reconstruction. We have already tried :   1. Putting everything back into the old machine to verify there has not been any damage to the boards. OK 2. Using the boards in the new machine but with Win2000 and Labiew 5.0, just to be sure that there are no conflicting elements in the hardware. OK   As we wanted to check everything slowly but surely we then installed LV ...

Differences in CIN management between Labview 5.0 and Labview 7.1 ? #9
Hi,   I'm using a VI on a two photon microscope. It steers the laser beam in the sample (quite the same way as a TV scan, scanning a fast line on the X axis, then moving the line down) controlling two mirrors by the PCI-MIO-16E-4 Multifunctions card on traditional DAQ and at the same time it serves as the acquitision through a non-NI DSP Multifunction-board with on-board buffers and hight data throughput (70 Mb/s).   It is this part of the program which gives us strong headaches since we have upgraded to a new PC. On the old machine we used Win2k and Labview 5.0; on the new machine we planned to use WinXP Pro and Labview 7.1. The acquisition part of the VI uses 2 CINs. One is used to configure the FPGA on the Multifunctions board at initialization. The second CIN reads he buffers received from the board and puts them into the shape of an image.   Now since we tried in WinXP Pro and Labview 7.1, we get some kind of weird bugs. Either there is a big problem concerning the synchronization of the mirros with the acquisition or with the image reconstruction. We have already tried :   1. Putting everything back into the old machine to verify there has not been any damage to the boards. OK 2. Using the boards in the new machine but with Win2000 and Labiew 5.0, just to be sure that there are no conflicting elements in the hardware. OK   As we wanted to check everything slowly but surely we then installed LV ...

Differences in CIN management between Labview 5.0 and Labview 7.1 ? #2
Hi,   I'm using a VI on a two photon microscope. It steers the laser beam in the sample (quite the same way as a TV scan, scanning a fast line on the X axis, then moving the line down) controlling two mirrors by the PCI-MIO-16E-4 Multifunctions card on traditional DAQ and at the same time it serves as the acquitision through a non-NI DSP Multifunction-board with on-board buffers and hight data throughput (70 Mb/s).   It is this part of the program which gives us strong headaches since we have upgraded to a new PC. On the old machine we used Win2k and Labview 5.0; on the new machine we planned to use WinXP Pro and Labview 7.1. The acquisition part of the VI uses 2 CINs. One is used to configure the FPGA on the Multifunctions board at initialization. The second CIN reads he buffers received from the board and puts them into the shape of an image.   Now since we tried in WinXP Pro and Labview 7.1, we get some kind of weird bugs. Either there is a big problem concerning the synchronization of the mirros with the acquisition or with the image reconstruction. We have already tried :   1. Putting everything back into the old machine to verify there has not been any damage to the boards. OK 2. Using the boards in the new machine but with Win2000 and Labiew 5.0, just to be sure that there are no conflicting elements in the hardware. OK   As we wanted to check everything slowly but surely we then installed LV ...

Differences in CIN management between Labview 5.0 and Labview 7.1 ? #6
Hi,   I'm using a VI on a two photon microscope. It steers the laser beam in the sample (quite the same way as a TV scan, scanning a fast line on the X axis, then moving the line down) controlling two mirrors by the PCI-MIO-16E-4 Multifunctions card on traditional DAQ and at the same time it serves as the acquitision through a non-NI DSP Multifunction-board with on-board buffers and hight data throughput (70 Mb/s).   It is this part of the program which gives us strong headaches since we have upgraded to a new PC. On the old machine we used Win2k and Labview 5.0; on the new machine we planned to use WinXP Pro and Labview 7.1. The acquisition part of the VI uses 2 CINs. One is used to configure the FPGA on the Multifunctions board at initialization. The second CIN reads he buffers received from the board and puts them into the shape of an image.   Now since we tried in WinXP Pro and Labview 7.1, we get some kind of weird bugs. Either there is a big problem concerning the synchronization of the mirros with the acquisition or with the image reconstruction. We have already tried :   1. Putting everything back into the old machine to verify there has not been any damage to the boards. OK 2. Using the boards in the new machine but with Win2000 and Labiew 5.0, just to be sure that there are no conflicting elements in the hardware. OK   As we wanted to check everything slowly but surely we then installed LV ...

Differences in CIN management between Labview 5.0 and Labview 7.1 ? #4
Hi,   I'm using a VI on a two photon microscope. It steers the laser beam in the sample (quite the same way as a TV scan, scanning a fast line on the X axis, then moving the line down) controlling two mirrors by the PCI-MIO-16E-4 Multifunctions card on traditional DAQ and at the same time it serves as the acquitision through a non-NI DSP Multifunction-board with on-board buffers and hight data throughput (70 Mb/s).   It is this part of the program which gives us strong headaches since we have upgraded to a new PC. On the old machine we used Win2k and Labview 5.0; on the new machine we planned to use WinXP Pro and Labview 7.1. The acquisition part of the VI uses 2 CINs. One is used to configure the FPGA on the Multifunctions board at initialization. The second CIN reads he buffers received from the board and puts them into the shape of an image.   Now since we tried in WinXP Pro and Labview 7.1, we get some kind of weird bugs. Either there is a big problem concerning the synchronization of the mirros with the acquisition or with the image reconstruction. We have already tried :   1. Putting everything back into the old machine to verify there has not been any damage to the boards. OK 2. Using the boards in the new machine but with Win2000 and Labiew 5.0, just to be sure that there are no conflicting elements in the hardware. OK   As we wanted to check everything slowly but surely we then installed LV ...

Differences in CIN management between Labview 5.0 and Labview 7.1 ? #8
Hi,   I'm using a VI on a two photon microscope. It steers the laser beam in the sample (quite the same way as a TV scan, scanning a fast line on the X axis, then moving the line down) controlling two mirrors by the PCI-MIO-16E-4 Multifunctions card on traditional DAQ and at the same time it serves as the acquitision through a non-NI DSP Multifunction-board with on-board buffers and hight data throughput (70 Mb/s).   It is this part of the program which gives us strong headaches since we have upgraded to a new PC. On the old machine we used Win2k and Labview 5.0; on the new machine we planned to use WinXP Pro and Labview 7.1. The acquisition part of the VI uses 2 CINs. One is used to configure the FPGA on the Multifunctions board at initialization. The second CIN reads he buffers received from the board and puts them into the shape of an image.   Now since we tried in WinXP Pro and Labview 7.1, we get some kind of weird bugs. Either there is a big problem concerning the synchronization of the mirros with the acquisition or with the image reconstruction. We have already tried :   1. Putting everything back into the old machine to verify there has not been any damage to the boards. OK 2. Using the boards in the new machine but with Win2000 and Labiew 5.0, just to be sure that there are no conflicting elements in the hardware. OK   As we wanted to check everything slowly but surely we then installed LV ...

How do I upgrade my VIs from LabVIEW 3.1 to LabVIEW 7.1
  Hello,   I have met a well known problem. I have to re-use some VIs from old version of LabView (3.1) to newer.   Every bit of documention I have found speaks about LabVIEW VI Conversion Kit, with this given part number 776874-03.  But I can not get it.   Is there somebody to give me a solution? I am working with Windows XP & LabView 7.1.   Thank you.     ...

labview 8.5 to labview 7.0
i am on my labview working with 8.5but at work, we only have labview 7.0.what would be my best way to get my vi to be 7.0?thank you so muchMessage Edited by krispiekream on 06-19-2008 03:59 PM In order to go from LV 8.5 to LV 7, you will need to have LV 8.5 (save it back to 8.0), LV 8.0 (save it back to 7.1) and LV 7.1 (to save back to 7.0). If it's only a few small VI's, you can post them on the forum and ask someone to do the saves for you.&nbsp; (Best if you do the save back to 8.0 and&nbsp;post that in order&nbsp;to eliminate 1 of the 3 steps for whoever will do the rest of the conversions for you.) yeah. great.. i did all those steps.i went from 8.0 to 7.1i dont have labview 7.1 so i can't go to 7.0.can someone please help me. Code.zip: http://forums.ni.com/attachments/ni/170/333708/1/Code.zip Hey Krispiekream, &nbsp; Please try the attached to see if it works with LV7.0 &nbsp; Hopefully it does!! &nbsp; &nbsp; Copy 7.0.zip: http://forums.ni.com/attachments/ni/170/334253/1/Copy 7.0.zip thank you so much. i'll try it right now. hi there,i somewhat got it to work.but i am having this error everytime i try to save it.does anyone know how i can get rid of it?<img src="http://forums.ni.com/attachments/ni/170/334653/1/untitled5.PNG"> Message Edited by krispiekream on 06-24-2008 06:02 PM untitled5.PNG: http://forums.ni.com/attachments/ni/170/334653/1/untitled5.PNG You might want to look into <a href=&...

open file that created on LabVIEW 7.0 EXPREES with LabVIEW 7.1 version
hi all, why i can't open file that open/modified LabVIEW 7.0 EXPREES&nbsp;, in version&nbsp;&nbsp;LabVIEW 7.1 ? &nbsp; thank's all&nbsp;&nbsp;&nbsp; :) yes the file is *.vi&nbsp;.&nbsp;&nbsp;tha file contain blok diagram. the that i get is :ERROR.jpg (i even can't open file in this porum: <a href="http://forums.ni.com/ni/board/message?board.id=170&amp;message.id=206190&amp;query.id=195707#M206190" target="_blank">http://forums.ni.com/ni/board/message?board.id=170&amp;message.id=206190&amp;query.id=195707#M206190</a> thank's ERROR.jpg: http://forums.ni.com/attachments/ni/170/209957/1/ERROR.jpg Dennis,&nbsp; please tell me how i can to save file on LabVieo 7.1&nbsp; that will open on LabVIEW 7 express ? which action i need to do ? ...

labview 7.1 to Labview 8.0 upgrade
Greetings all, &nbsp; My company has recently aquired labview 8.0 licences&nbsp;and is intending to use it as its development platform instead of labview 7.1. the problem is that all of our customers are&nbsp;currently running executables generated in a labview 7.1 environment and&nbsp;any updated versions of our software that&nbsp;we will send them in the future will most likely be developed&nbsp;in labview 8.0.&nbsp;The question&nbsp;is , other than sending them the executables generated by LV8&nbsp;along with LV8 RTE are there any problems. did any one&nbsp;see a problem with&nbsp;a conversion like this. i have done alot of reasearch about this and have been testing the converted code from 7.1 to 8 and the executalbes generated by 8.0 and i havent seen any major problems. any feedback on a related probelm would be greatly appreciated. &nbsp; I am using Serial communications LPT ports udp communications PCI I/O boards talking to remote and local data bases (Micorsoft and Oracle) all on a Windows Xp&nbsp;pro operating system&nbsp; ...

Is LabVIEW 7.1 Aug2005 identical to LabView 7.1 May2005?
I am attempting to have a coworker at a remote site set up their PC with the exact same software as one that I have here.&nbsp; I used the August 2005 CDs from Developer Suite.&nbsp; My coworker tells me that he has the TestStand 3.1, and the Device Driver CDs from the Aug2005 Dev Suite shipment, but he can only find LabView 7.1 from the May2005 delivery. &nbsp; I would like to safely&nbsp;assume that LabView 7.1 is LabView 7.1, regardless of whether it was shipped in May or August, but it is really important to me to make absolutely sure that we end up with the same software versions.&nbsp; So I was hoping somebody could confirm that the May and August CDs (Dev Suite, 2005) contain the exact same LabView software version. &nbsp; I noticed that there were 3 LabView 7.x version selections for submitting this issue;&nbsp; 7.0&nbsp;&nbsp;&nbsp; 7.1&nbsp;&nbsp;&nbsp; and&nbsp;&nbsp;&nbsp; 7.1.1 &nbsp; I set up my PC using Aug2005 CDs and my LabView splash screen shows "7.1".&nbsp; Can I assume that if I had version 7.1.1 that I would see "7.1.1" on the splash screen?&nbsp; (Many pieces of software do not show the 2nd decimal point or anything past it on their splash screen.&nbsp; The Help | About selection for LabView just ends up showing the splash screen again.) &nbsp; My Aug2005 CD shows "7.1" printed on it.&nbsp; Can I assume that my LabView CD would have &quo...

labview 8.0 to labview 7.0
Hi, Can somebody save the below VIs in LV 8.0&nbsp;for LV 7.0, please... ?! Find Power Interrupt Time.vi: http://forums.ni.com/attachments/ni/170/335061/1/Find Power Interrupt Time.vi Remove Element(s) from Array.vi: http://forums.ni.com/attachments/ni/170/335061/2/Remove Element(s) from Array.vi Hi Partha,Here are the VIs in LV7.0.Have a nice day Find Power Interrupt Time.vi: http://forums.ni.com/attachments/ni/170/335070/1/Find Power Interrupt Time.vi Remove Element(s) from Array.vi: http://forums.ni.com/attachments/ni/170/335070/2/Remove Element(s) from Array.vi ...

DSC module 7.1 labview 7.1, new controls and functions not showing up in labview
Dear Reader, I have installed labview 7.10 (also tried update to 7.11) and DSC module 7.1 I thought I would get additional functions and controls in labview due to installation of this module, but I do not see addtional controls or functions, althought I have searched for them and set the controls to "advance" etc. Anyone any idea what I have to do. thanks and regards. ...

Problem in creating the simulation dll using SIT 2.0.3,matlab 7.1,labview 7.1
I am currently using SIT 2.0.3 ,using this toolkit i am trying to create the simulation DLL for labview.but i am getting the following error in matlab command window Error: File: C:\SimulationInterfaceToolkit\ModelInterface\basic.tlc Line: 117 Column: 7Undefined identifier ReleaseVersionError: File: C:\SimulationInterfaceToolkit\ModelInterface\basic.tlc Line: 117 Column: 25The == and != operators can only be used to compare values of the same typeError: File: C:\SimulationInterfaceToolkit\ModelInterface\basic.tlc Line: 260 Column: 26Undefined identifier ReleaseVersionError: File: C:\SimulationInterfaceToolkit\ModelInterface\basic.tlc Line: 260 Column: 44The == and != operators can only be used to compare values of the same type &nbsp; Is this a version problem? I am using Simulation interface toolkit 2.0.3 Matlab 7.1.0.246(R14) Service pack Real time workshop V.6.3 Labview 7.1 Microsoft visual C++ 6.0 &nbsp; Can anybody help me to solve this issue. &nbsp; Hi, Unfortunately, it looks like the versions you are using are indeed not compatible. Here is an excerpt from the <a href="http://ftp.ni.com/support/softlib/labview/labview_toolkits/simulation_interface/2.0.3/sit_2_0_3_readme.html" target="_blank">Read Me file</a> for Simulation Interface Toolkit 2.0.3: To use the Simulation Interface Toolkit 2.0.3, you must be a properly licensed user of and have the following software installed on the host computer. - The MathWorks MATLAB ver...

Open LabVIEW 8.0 files in LabVIEW 7.0
Hello, &nbsp; I have developed an application in LabVIEW 8.0 and built a standalone executable just to realize that I have to deploy it in a Windows NT computer that is not compatible with LV Run Time Engine 8.0 that only supports Windows 2000 and XP. I have tried to open the labView files (*.vi) using LabVIEW 7.0 but it gives me an error. Is there any easy and clean solution to import these files in LV 7.0 in order to build a new excutable and make&nbsp;it compatible with Windows NT? &nbsp; Regards, &nbsp; Toni ...

How to convert LabVIEW 3.0 version source code to LabVIEW 6.1 Version?
How to convert LabVIEW 3.0 version source code to LabVIEW 6.1 Version? Follow this link to see how to get the free VI Conversion package from NI... http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/429e45271cfd683786256d87006b1eef?OpenDocument Dan ...

Would a LabVIEW 8.5 Executable play nice with LabVIEW 7.1 Development on the Same System?
Our testing computer right now just has the user&nbsp;run the corresponding .vi file since we have LabVIEW 7.1 installed on the computer. &nbsp; If I use 8.5 to compile this .vi to an executable, I realize that I must install the run-time support for 8.5.&nbsp; My question is what effect will installing the 8.5 run-time have on the ability to continue to run the other 7.1 VIs with LabVIEW 7.1.&nbsp; &nbsp; Should I be concerned with losing MAX settings when installing the run-time support for 8.5? I want to be able to run 8.5 executables but also able to open up a 7.1 .vi file in LabVIEW 7.1 and run it that way also. &nbsp; Thanks for your help! I have 8.5 on my system and the idea is to slowly replace the running of the .vi files with .exe files, I was just curious in case my .exe doesn't work I can still run the tests with .vi in the mean time. &nbsp; Thanks for your help folks! &nbsp; ...

if time = 3 seconds, how do i set the values of the time steps 0,0.1,0.2,0.3,0.5,1.0,1.5,2.0,3.0,5.0 to -9999 from time =3 seconds
Hi &nbsp; I have 18 inputs (arrays) which contain certain statistics and if time&nbsp;&nbsp;= 3 seconds, set the values of time step 5.0 to -9999.0. &nbsp; I was wondering if there is an efficient way to do this without using a lot of case statements? &nbsp; Thank you. Hello AdrianT, it's not really clear to me what you want to do... I suspect: you have an array containing values and you want to output them with a fixed timing of 3 seconds: you should use a for loop autoindexing trough your array and sending the value to your indicator/output/whatever. Put a "wait for next multiple" into your for loop. Or do you want to have a minimum time delay of 3 seconds? Again use a for loop, get the time value and use a InRange&amp;Coerce with minimum set to 3 seconds... Or you should explain more precisely what you need... Hi Thanks for that. Let me explain. &nbsp; The time may vary. Let me give an example. if time&nbsp; = 2.1, I want to set the time step's &nbsp;3.0 and 5.0's values to -9999.0. if the time =0.1 seconds then I want to set 0.2,0.3, 0.5 etc values to -9999.0 etc .................................................................... &nbsp; Can you please help? Thank you. Hello TUDS, do you use different accounts/nicknames ? Well, that's easy, at least for a sorted array: Search for your time-value in the array (Threshold 1D array). Fill all elements from that index till the end with your "error...

Compatability from Labview 5 to labview 7 express?
I am having a problem where I may have to write a VI on labview 5 on one computer, then move it to a second computer running labview 7 express. Are there any compatability issues I may have to deal with in doing this? there is not supposed to any compatibility issues with version 5. You would have a problem going backwards from 7 to 5 but not from going from 5 to 7.At least that is the way it is supposed to work. Joe Hello Kura, LabVIEW 7.0 will open and convert LabVIEW 5 VI=92s. There are occasionally conversion issues, just depending on what is involved in the VI (the bulk of which bein...

Can LabView 8.5 read LabView 8.5.1 VIs
Since LabVIEW 8.5.1 is only a bug fix, can LabVIEW 8.5 read any VIs generated in LabVIEW 8.5.1? Simple answer YES. But it&nbsp;will the VIs compile so it is a good idea to make a mass compile in the folder where the VIs are. ...

Can I run a LabVIEW 7.1 Application on a system with LabVIEW 6.1?
The VI App did not run properly, even after I installed the LabVIEW 7.1 Run time engine. Perhpas I need to uninstall the LV 6.1 run time engine? Thank you for any suggestions; perhaps it's something minor that I'm overlooking! Are you talking about a 7.1 exe or VI? An executable will run with 6.1 installed and the 7.1 run-time. A 7.1 VI will only run with 7.1 development system. When you say it did not run properly, what exactly do you mean? I am referring to trying to run a 7.1 EXE application on a system with a resident 6.1 development environment, and the 7.1 run-time engine ins...

Save VI developed in Labview 6.1 to work in Labview 5.1
I have been working with Labview 6.1 but I need to execute my VIs in Labview 5.1 too. What can I do to reuse all the VIs without having to develop them again in Labview 5.1? I am not able to save my VIs as 5.1 from Labview 6.1 It only allows me to save them as Labview 6.0 Thank you! Assuming they can be converted, and there's not too many, you might want to try posting them here for someone to convert. (convert to 6.0 first and zip) Not too elegant but may get you out of a bind. Hello, Yes, each new version of LabVIEW only carries the capability to save for one version previous. So, you would need to save the 6.1 VIs for vesion 6.0, and then from LabVIEW 6.0 save for 5.1. If there aren't too many VIs, one of our engineers here would most likely have no problem with making the conversion for you. You could email NI with them to make it more private, if you'd like, rather than posting them on the site. (To create an email request, go to www.ni.com/ask). Hope this helps! Liz Fausak National Instruments ...

Web resources about - Differences in CIN management between Labview 5.0 and Labview 7.1 ? #3 - comp.lang.labview

Difference - Wikipedia, the free encyclopedia
Text is available under the Creative Commons Attribution-ShareAlike License ;additional terms may apply. By using this site, you agree to the ...

3Q EARNINGS: Mark Zuckerberg on the Differences Between Messenger and WhatsApp
When Facebook announced its intent to acquire cross-platform messaging application WhatsApp in February, questions surfaced on whether WhatsApp ...

Facebook Tips: What’s the Difference between Top News and Most Recent?
The following is part of our series, Facebook Tips, which answers some of the most commonly asked questions about using Facebook. While we hope ...

Recognising cultural differences is not racism
... them apart - and that's dangerous. Comparing cultural traits in these politically correct times can elicit rebukes, but brushing over the differences ...

Comparison: What are the differences between the 9.7-inch iPad Pro and 12.9-inch model?
... unveiled the 9.7-inch iPad Pro . While the device is essentially the same as the larger 12.9-inch model, there are a few notable differences ...

Commission Compromise Could Have Made All the Difference
Could the fractious client-agency relationship have been salvaged if agencies had been willing to take less than 15% commission? "Losing the ...

Galaxy S7 Isocell vs Sony camera sensor: what’s the difference?
... have every right to believe all Samsung Galaxy S7 handsets are created equal, but such is not the case. And we are not only talking about differences ...

Bidwill: Chandler Jones will be a difference-maker
Arizona Cardinals president Michael Bidwill believes Chandler Jones will improve the team's chances of getting to the Super Bowl.

The marginal importance of marginal ideological differences on the Supreme Court
I am not getting the argument that Obama’s choice of a moderate justice is a massive concession even if he can be confirmed before the lame duck ...

What are the differences between AR and VR?
Now that HTC Vive has become available, we seem to have moved past virtual reality that gives you motion sickness and we can really start to ...

Resources last updated: 3/29/2016 12:43:39 AM