f



Is LabVIEW 7.1 Aug2005 identical to LabView 7.1 May2005?

I am attempting to have a coworker at a remote site set up their PC with the exact same software as one that I have here.  I used the August 2005 CDs from Developer Suite.  My coworker tells me that he has the TestStand 3.1, and the Device Driver CDs from the Aug2005 Dev Suite shipment, but he can only find LabView 7.1 from the May2005 delivery.
 
I would like to safely assume that LabView 7.1 is LabView 7.1, regardless of whether it was shipped in May or August, but it is really important to me to make absolutely sure that we end up with the same software versions.  So I was hoping somebody could confirm that the May and August CDs (Dev Suite, 2005) contain the exact same LabView software version.
 
I noticed that there were 3 LabView 7.x version selections for submitting this issue;  7.0    7.1    and    7.1.1
 
I set up my PC using Aug2005 CDs and my LabView splash screen shows "7.1".  Can I assume that if I had version 7.1.1 that I would see "7.1.1" on the splash screen?  (Many pieces of software do not show the 2nd decimal point or anything past it on their splash screen.  The Help | About selection for LabView just ends up showing the splash screen again.)
 
My Aug2005 CD shows "7.1" printed on it.  Can I assume that my LabView CD would have "7.1.1" printed on it if version 7.1.1 were on the disk?
 
The disks that I have for May2005 and Aug2005 both are marked "7.1".  The Nov2005 set has LabView 8.0, so (when) was version 7.1.1 shipped to me?
0
x9561 (148439)
5/10/2006 2:40:12 PM
comp.lang.labview 35210 articles. 1 followers. vasusachin24 (1) is leader. Post Follow

2 Replies
1199 Views

Similar Articles

[PageSpeed] 35

Yes, the Aug. '05 and May '05 (and any other shipment labeled 7.1 for that matter) will all be identical.

I don't think any CD's were shipped as the 7.1.1 update, so you
shouldn't have to worry about that. Even though you'd be able to open
7.1.1 VIs in 7.1.

Yes, the splash screen does display the entire version as shown below.

<img src="http://forums.ni.com/attachments/ni/170/184097/1/LV%20711.gif"> 

I don't think NI has ever shipped a minor dot update on CD unless it's
the patch in a separate directoy that must be installed separately.

So overall, you should be fine with the CDs you currently have,

EdMessage Edited by Ed Dickens on 05-10-2006  01:16 PM


LV 711.gif:
http://forums.ni.com/attachments/ni/170/184097/1/LV 711.gif
0
x9561 (148439)
5/10/2006 6:40:08 PM
I believe 5.0.1 was shipped on a CD because it was such a massive update.&nbsp; Somebody correct me if I'm wrong.&nbsp; There may have been others before that, but 5.0.1&nbsp;happened to be&nbsp;my first LV version.
-D
0
x9561 (148439)
5/10/2006 6:40:11 PM
Reply:

Similar Artilces:

DSC module 7.1 labview 7.1, new controls and functions not showing up in labview
Dear Reader, I have installed labview 7.10 (also tried update to 7.11) and DSC module 7.1 I thought I would get additional functions and controls in labview due to installation of this module, but I do not see addtional controls or functions, althought I have searched for them and set the controls to "advance" etc. Anyone any idea what I have to do. thanks and regards. ...

Can I run a LabVIEW 7.1 Application on a system with LabVIEW 6.1?
The VI App did not run properly, even after I installed the LabVIEW 7.1 Run time engine. Perhpas I need to uninstall the LV 6.1 run time engine? Thank you for any suggestions; perhaps it's something minor that I'm overlooking! Are you talking about a 7.1 exe or VI? An executable will run with 6.1 installed and the 7.1 run-time. A 7.1 VI will only run with 7.1 development system. When you say it did not run properly, what exactly do you mean? I am referring to trying to run a 7.1 EXE application on a system with a resident 6.1 development environment, and the 7.1 run-time engine ins...

open file that created on LabVIEW 7.0 EXPREES with LabVIEW 7.1 version
hi all, why i can't open file that open/modified LabVIEW 7.0 EXPREES&nbsp;, in version&nbsp;&nbsp;LabVIEW 7.1 ? &nbsp; thank's all&nbsp;&nbsp;&nbsp; :) yes the file is *.vi&nbsp;.&nbsp;&nbsp;tha file contain blok diagram. the that i get is :ERROR.jpg (i even can't open file in this porum: <a href="http://forums.ni.com/ni/board/message?board.id=170&amp;message.id=206190&amp;query.id=195707#M206190" target="_blank">http://forums.ni.com/ni/board/message?board.id=170&amp;message.id=206190&amp;query.id=195707#M206190</a> thank's ERROR.jpg: http://forums.ni.com/attachments/ni/170/209957/1/ERROR.jpg Dennis,&nbsp; please tell me how i can to save file on LabVieo 7.1&nbsp; that will open on LabVIEW 7 express ? which action i need to do ? ...

Controlling VI Logger 1.1.1 with LabVIEW 7.1
I have LabVIEW 7.1 on my system and installed VI Logger (1.1 them upgraded to 1.1.1). I would like to programatically control VI Logger with LabVIEW. There are references to VIs under the Advanced pallate to do just that, but I cannot find them or any help files to explain what to do. Where do I find these VIs? ...

labview 7.1 to Labview 8.0 upgrade
Greetings all, &nbsp; My company has recently aquired labview 8.0 licences&nbsp;and is intending to use it as its development platform instead of labview 7.1. the problem is that all of our customers are&nbsp;currently running executables generated in a labview 7.1 environment and&nbsp;any updated versions of our software that&nbsp;we will send them in the future will most likely be developed&nbsp;in labview 8.0.&nbsp;The question&nbsp;is , other than sending them the executables generated by LV8&nbsp;along with LV8 RTE are there any problems. did any one&nbsp;see a problem with&nbsp;a conversion like this. i have done alot of reasearch about this and have been testing the converted code from 7.1 to 8 and the executalbes generated by 8.0 and i havent seen any major problems. any feedback on a related probelm would be greatly appreciated. &nbsp; I am using Serial communications LPT ports udp communications PCI I/O boards talking to remote and local data bases (Micorsoft and Oracle) all on a Windows Xp&nbsp;pro operating system&nbsp; ...

LabView 7.1.1 + DAQMX
I want to know Wheter I can use task created using DAQMX using LabVIEW 7.1.1 can be inovked either by VB.net or VB6 if yes than how:) Secondly How can i used the traditional DAQ with VB.net or VB6, It would be&nbsp; helpful if any body can provide some info or weblink on this topic. Regards Nadeem <a href="http://forums.ni.com/ni/board/message?board.id=170&thread.id=327317" target="_blank">duplicate post</a> ...

LabView 7.1 and MATLAB 7
LabView 7.1 hangs when I try to send variable to MATLAB 7 workspace using standart LabView to MATLAB script. Nothing appears in MATLAB 7 workspace. When I tried to run the MATLAB Script-Fractal.vi (MATLAB script node has only outputs) from examples directory - everything work fine. When I run the MATLAB Script - Lorenz Diff Eq.vi from examples - error message appears:"Error 1047 occurred at LabVIEW: LabVIEW failed to send variable to the script server. Server:"Inappropriate input array size" in MATLAB Script - Lorenz Diff Eq.vi". Using LabView 7.1 with previous version of MATLAB (6.5) I have no problem running examples and my own LabView programs. Could someone suggest me how to fix described problem? Regards to All. Sergey Yakovlev wrote on 05 Aug 2004 16:48:26 MET: > LabView 7.1 hangs when I try to send variable to MATLAB 7 > workspace using standart LabView to MATLAB script. [...] > "Error 1047 occurred at LabVIEW: LabVIEW failed to send > variable to the script server. Server:"Inappropriate input > array size" in MATLAB Script - Lorenz Diff Eq.vi". I'm having the same difficulties. The only mentioning of this I found so far was this thread: Message-ID: <50650000000500000096700100-1079395200000@exchange.ni.com> referring to this page: <URL:http://digital.ni.com/public.nsf/websearch/4475BC3CEB062C9586256D750058F14B?OpenDocument> This didn't work for me though. I couldn't get the code w...

Labview 7.1.1 Errors
I am using the version 7.1.1 of LV and LV RT, i am programming a cFP-2020. &nbsp; &nbsp; Labview&nbsp;keeps crashing and losing the connection with the remote target (cFP), i am attaching a file containing all the error logs generated by LV, i never got this problem with earlier versions of LV i think this may be some kind of bug plase let me know how can i fix it. &nbsp; By the way my PC is a PIV @3 GHZ , 1 GB of RAM running WinXP SP2 &nbsp; &nbsp; &nbsp; ...

How can you simple install the LabVIEW Toolboxes with LabVIEW 7.1
Hello, yesterday was a nice day, I have receved the NI Developer Suite Professional Control Edition with the new LabVIEW 7.1, RT 7.1, DSC 7.1 etc. I still use Labview 7.0 (Developer Suite Professional Control Edition) Unfortunately I can't install the Toolboxes from the toolbox cd into the right directory! Always when I try to install a toolbox, it will be installed into the LabVIEW 7.0 directory. It is not possible to change the directory (exeption: SPC-Toolbox) Even if you change the name of your LabVIEW 7.0 Directory, the toolbox produce a new folder LabVIEW 7.0 and is getting instaled ...

Trying to use Labview Test Executive with Labview 7.1
I have an old application I wrote in Labview 5.1 using the Test Executive version 5.1.&nbsp; I now need to modify the program slightly for a new product. So far I have done the following: 1. Installed the Test Executive in the Labview 7.1 directory 2. Mass compiled the vi's in the LVEXEC51 folder &nbsp; During the mass compile, I see a number of errors when it tries to compile the vi's in the DATABASE folder. It can't seem to find vi's related to SQL (ie Easy SQL.vi). When I try to run the Test Executive directly from the Operator.llb, I see the following errors: &n...

Problem in creating the simulation dll using SIT 2.0.3,matlab 7.1,labview 7.1
I am currently using SIT 2.0.3 ,using this toolkit i am trying to create the simulation DLL for labview.but i am getting the following error in matlab command window Error: File: C:\SimulationInterfaceToolkit\ModelInterface\basic.tlc Line: 117 Column: 7Undefined identifier ReleaseVersionError: File: C:\SimulationInterfaceToolkit\ModelInterface\basic.tlc Line: 117 Column: 25The == and != operators can only be used to compare values of the same typeError: File: C:\SimulationInterfaceToolkit\ModelInterface\basic.tlc Line: 260 Column: 26Undefined identifier ReleaseVersionError: File: C:\SimulationInterfaceToolkit\ModelInterface\basic.tlc Line: 260 Column: 44The == and != operators can only be used to compare values of the same type &nbsp; Is this a version problem? I am using Simulation interface toolkit 2.0.3 Matlab 7.1.0.246(R14) Service pack Real time workshop V.6.3 Labview 7.1 Microsoft visual C++ 6.0 &nbsp; Can anybody help me to solve this issue. &nbsp; Hi, Unfortunately, it looks like the versions you are using are indeed not compatible. Here is an excerpt from the <a href="http://ftp.ni.com/support/softlib/labview/labview_toolkits/simulation_interface/2.0.3/sit_2_0_3_readme.html" target="_blank">Read Me file</a> for Simulation Interface Toolkit 2.0.3: To use the Simulation Interface Toolkit 2.0.3, you must be a properly licensed user of and have the following software installed on the host computer. - The MathWorks MATLAB ver...

LabVIEW RTE 7 does not work on Linux with Mozilla (1.7) or Netscape (7.2)
LabVIEW RTE 7 does not work on Linux (Mandrake 10.1 or Knoppix 3.7) with Mozilla (1.7) or Netscape (7.2). We tried everything described in <http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=506500000008000000EFBC0000&ECategory=LabVIEW.LabVIEW+General> copying plugins, but always the gray window on Mandrake or error setting up plugin on Knoppix. We are trying to drive remote applications on your web site with Linux (if possible) to decide about purchasing LabVIEW for Linux. Is there a demo version for Linux we could try? Apparently, LabVIEW fo...

Labview 7.1 and Matlab 7.4
We had a vi working with Labview 7.1 : Unfortunately University upgraded the common version of Matlab to 7.4(R2007a) from 7.2 - and - the vi stopped working - no error messages while running the vi. 1. does Labview 7.1 support Matlab 7.4.0 2. Is there any patch DLL etc to resolve the problem? &nbsp; Thanks for your help. &nbsp; Mankind Ian, Some More news. I had more interaction with our computer centre and they have sent me an OSD file, which while opening with notepad looks something like Javascript. When running that script, I got my Labview to communicate with the Matlab server - as he explains - it launches the local copy of Labview within the SoftGrid environment and that would allow it to interact with Matlab. I can send the OSD file to you. The only problem is while in the middle of the analysis, it crashes sometimes because it forces Matlab to open too. I am in touch with computer centre to resolve the problem. Cheers, &nbsp; Mankind ...

Labview 7.1.1 crashes daily?
We are running a multi-chamber process system using LabVIEW 7.1.1 and the matching 7.1.0 DSC module. Each process chamber is controlled by software on an individual workstation, which share status information with a master control workstation via the DSC. There is also a gateway workstation that lets the chamber workstations communicate via OPC to an array of instruments in the system, and a database stored on another workstation where all process steps are logged.That part is all working.The problem is that one (and only one) of the process workstation programs crashes once a day (usually in early hours of the morning). There are no Labview error dialogs generated; we simply arrive in the morning to find the dreaded Windows 'LabVIEW.exe has encountered a problem and needs to close' message on the screen with the option to send the error report to Microsoft. Any hints? Since it's a windows exit rather than a labview crash I'm not getting any useful error messages.Related question: We've been sticking with LV 7.1.1 for now because we're trying to actually *use* our process system, and I wasn't sure how much rewriting I'd have to do to get everything working in 8.x . I do have the 8.5 install disks; would upgrading be likely to help, and how transparent will the upgrade process be, given that I'm dealing with 8-9 interconnected machines and the DSC? If the crash is being caused by code which is "tickling" that specific instance of ...

handle pointer in labview 7.1.1 ??
:smileyvery-happy:Hello, I'm developing a Vi which is&nbsp;using a DLL. The problem is that the function I want use had parameters that are not directly integer values, but pointer on a structure with integer values. I do the DLL function call and the prototype of the function is: Unsigned char BFLOADER_ComConfig(Char TargetType, void *ComConfig, Unsigned Long *ComDevice). This prototype looks good regarding the DLL fuction specification but I had this error message when executing the VI: &nbsp; The vi stop at the Calling DLL Function process 0x5A4. &nbsp; Is it the way to call the parameters which are not good? or simply a bad use of the DLL? &nbsp; How can I interpret the 0x5A4 error code? &nbsp; Thanks, pinto_armindo@yahoo.fr &nbsp; Thanks for your tutorials, i'll search and contact if still problems &nbsp; ...

Compatibility of Labview 7.1 with 7.0
I just installed LV7.1 on a new machine and I'm developing source code for a customer with LV7.0. When I tried to save the vi in LV7.0, I got several messages that said certain components could not be saved in 7.0. But a vi WAS saved along with a directory containing some support files. I have two questions: (1) Will these files work on 7.0 (I'm assuming no) and (2) is there any problem with installing 7.0 after installing 7.1 (separate coexisting systems). You should be able to install LabVIEW 7.0 after LabVIEW 7.1. I typically have at least the three last version installed concurrently. Do you have more details on the error messages? Many times you can ignore them, e.g. it won't convert any system VIs from vi.lib because it will use the ones from the 7.0 installation. Of course if you use a new 7.1 feature that is not available in 7.0, it will still convert, but you might get a broken VI with the incompatible elements missing. Simply open the broken VI in 7.0 and program around the problem areas. ...

Labview update from 7.0 to 7.1
I have Labview Express version 7.0 for students. I am trying to use a VI that was created by another person who was on a project that I am currently working on. However he used Labview 7.1 to save it and I cannot open his program on my computer (I have 7.0). I looked in the drivers and updates section on the website, but could not find any update that will ptach my version from 7.0 to 7.1. Please help. Thank you!! ...

Labview 7.1 to 6.1 conversion
Hi &nbsp; I'm developing the automation for analyses. I am using a multichannel potentiostat from Bio-Logic. The manufacturer gives the drivers and example in LabVIEW 7.1; unfortunately I have&nbsp;to use LabVIEW 6.1 only. &nbsp; Would you mind converting the enclosed package to v6.1? &nbsp; Many thanks in advance. Xu EC-Lab development package.zip: http://forums.ni.com/attachments/ni/170/228002/1/EC-Lab development package.zip ...

Uninstalling LabVIEW RTE 7.1.1
I'm trying to 'clean' a computer to install the new versions of NI Software and I'm getting the following error... any suggestions??? LVProblem.JPG: http://forums.ni.com/attachments/ni/170/224683/1/LVProblem.JPG Hello,This seems like an issue that may require some assistance that is more complicated than can be handled on a discussion forum.&nbsp; I would recommend contacting an Applications Engineer directly by going to www.ni.com/ask and submitting an e-mail support request. ...

convert Labview 7.1 to 7.0 for me
COuld someone please convert this VI to Labview 7.0 for me? &nbsp; Open the VI Click File &gt; Save with Options CLick radio button 'Save for Previous' Select 7.0 from drop down list... Be my hero!!! &nbsp; &nbsp; AlicatRead.zip: http://forums.ni.com/attachments/ni/170/144047/1/AlicatRead.zip Here you go. It doesn't convert stuff in the vi.lib &nbsp; P.M. AlicatRead 7_0.zip: http://forums.ni.com/attachments/ni/170/144049/1/AlicatRead 7_0.zip Hello, I need somebody to convert this file from 7.1 to 7.0 for me, I could not find where to download a 7.0 evalu...

Differences in CIN management between Labview 5.0 and Labview 7.1 ? #4
Hi, &nbsp; I'm using a VI on a two photon microscope. It steers the laser beam in the sample (quite the same way as a TV scan, scanning a fast line on the X axis, then moving the line down)&nbsp;controlling two mirrors by the&nbsp;PCI-MIO-16E-4 Multifunctions card&nbsp;on traditional DAQ and at the same time it serves as the acquitision through a non-NI DSP Multifunction-board with on-board buffers and hight data throughput (70 Mb/s). &nbsp; It is this part of the program which gives us strong headaches since we have upgraded to a new PC. On the old machine we used Win...

Differences in CIN management between Labview 5.0 and Labview 7.1 ? #2
Hi, &nbsp; I'm using a VI on a two photon microscope. It steers the laser beam in the sample (quite the same way as a TV scan, scanning a fast line on the X axis, then moving the line down)&nbsp;controlling two mirrors by the&nbsp;PCI-MIO-16E-4 Multifunctions card&nbsp;on traditional DAQ and at the same time it serves as the acquitision through a non-NI DSP Multifunction-board with on-board buffers and hight data throughput (70 Mb/s). &nbsp; It is this part of the program which gives us strong headaches since we have upgraded to a new PC. On the old machine we used Win...

Why multihreaded soft worked under Labview 7 but is slower under Labview 8.2.1
Hello all ! &nbsp; I have a multithreated software developped under Labview 7.0. Under this version, multithreading can be enabled/disabled via the&nbsp;options menu&nbsp;/ performance &amp; disk section. This is not present under Labview 8.2.1. &nbsp; My software works properly under LW7 but is slower under LW8.2.1...how can I configure labview and or my vi&nbsp;to make it running as well as&nbsp;under LW7 ??? Is there a "hidden" option to enable/disable multithreading under LW8.2.1 ?&nbsp; &nbsp; Thank you for your help &nbsp; remi To disable multithreading, add ESys.StdNParallel=0 to the ini file. (See: <a href="http://digital.ni.com/public.nsf/websearch/2F606AD236C606008625718E00561A62?OpenDocument" target="_blank">http://digital.ni.com/public.nsf/websearch/2F606AD236C606008625718E00561A62?OpenDocument</a>) However, it is not celar that this is the problem. Did you save the entire hierachy under 8.2.1 after conversion (of course after making sutable backup copines of the 7.0 version ;)). Freshly converted, but not yet saved code runs typically much slower. Also, what do you mean by "slower" 10% slower, 10x slower? How do you measure speed? Thanks for your quick answer altenbach. The tips given at this link will really be useful to me! It seems that I made a wrong conversion of the files...fortunately I made suitable backup of the 7.0 version :smileywink:. I will investigate mor...

Differences in CIN management between Labview 5.0 and Labview 7.1 ? #3
Hi, &nbsp; I'm using a VI on a two photon microscope. It steers the laser beam in the sample (quite the same way as a TV scan, scanning a fast line on the X axis, then moving the line down)&nbsp;controlling two mirrors by the&nbsp;PCI-MIO-16E-4 Multifunctions card&nbsp;on traditional DAQ and at the same time it serves as the acquitision through a non-NI DSP Multifunction-board with on-board buffers and hight data throughput (70 Mb/s). &nbsp; It is this part of the program which gives us strong headaches since we have upgraded to a new PC. On the old machine we used Win...

Web resources about - Is LabVIEW 7.1 Aug2005 identical to LabView 7.1 May2005? - comp.lang.labview

Identical particles - Wikipedia, the free encyclopedia
Identical particles , also called indistinguishable or indiscernible particles , are particles that cannot be distinguished from one another, ...

The Ladies - Life with identical girls - an album on Flickr
The Adventures of Baby-A and Baby-B. Various shots of my identical twin girls. You like pictures of little girls? Here's a boatload of them taken ...

ERVs different or identical?! - YouTube
Creation debate from Yukon Oklahoma featuring Dr. Charles Jackson and Abbie Smith. March 26, 2009

Identical triplets born in Texas are 'a miracle'
The father of identical triplets born in a Texas hospital says his three daughters, including conjoined twins, are &quot;a miracle&quot; sent ...

7 Tech Executives Who Look Identical To Other Tech Executives
Business Insider Australia 7 Tech Executives Who Look Identical To Other Tech Executives Business Insider Australia Bonus: It's impressive ...

The identical twins with an eerie VCE coincidence
They're identical twins who studied the same subjects, attended the same school and both decided to wait for their VCE results to arrive in the ...

Daniel Hughes survives blow by deadly bouncer in near identical incident as former teammate Phillip Hughes ...
DANIEL Hughes has survived an almost identical blow to the head which killed his former teammate Phillip Hughes, during a first grade cricket ...


Anna and Lucy DeCinque: Identical twins want identical pregnancy - SBS Insight - PerthNow Search Search ...
IDENTICAL twins Anna and Lucy DeCinque — with their identical boyfriend, bed, mobile phone number, clothes, hairstyles, diet and cosmetic enhancements, ...

NASA compares astronaut Scott Kelly to identical twin to help determine effects of space
When astronaut Scott Kelly arrived in Houston on Thursday morning, he was about two inches taller than when he left for the International Space ...

Resources last updated: 3/28/2016 11:16:07 PM