f



read text file through Labview and then write to an excel file

Hello,
 
I am relatively new with using Labview. I was wondering what would be a general method of reading data from a text file (words, sentences, numbers, and etc.) and making Labview write it on an Excel file.
 
Thanks
Ivan
0
x9561 (148439)
6/2/2006 2:40:11 PM
comp.lang.labview 35213 articles. 1 followers. vasusachin24 (1) is leader. Post Follow

0 Replies
1613 Views

Similar Articles

[PageSpeed] 22

Reply:

Similar Artilces:

reading from text file to excel file
Hi, I do not know if this is right place for this, but i need some help. I have a text file, whose values are seprated by a delimiter. I want to open this file in excel, ( not import it) . I have written the driver prg in c#. The code opens the file, but it is not writting the values from text file into excel file. I can not figure out the problem here. This is my code: StreamReader dataFileReader =3D null; FileInfo file =3D null; Excel.Application ExcelObj =3D new Excel.Application(); Excel.Workbook workbook =3D null; Excel.Range...

write binary in text file to excel file
Hi all, I have a few questions regarding writing binary in text file to excel file. 1. How do I specify so that there will 8bits in one cell? 2. When the front bits are zeros, the zeros will not be showed. Eg. 00110101 will be shown as 110101. How to make it take the zeros into account? Thanks alot. Best regards, Jess Try to use cell array of srings such as "00101". Then put this cell array in xlswrite function. ------------------------------------ Maxim Vedenev, Matlab freelancer vedenev@ngs.ru http://simulations.narod.ru/ ...

Time in LabVIEW DAQ Assistant and Write LabVIEW file
Hello all, I would be extremely grateful for your assistance in helping me understand the timing in LabVIEW. Here are the details of the system. The data acquisition is done using a simple LabVIEW 8.2 based program consisting of a DAQ Assistant VI and a Write to Measurement File VI, which writes data in TDM format (binary with XML header). The hardware consists of a 1042Q chassis that contains 2 PXI-6133 cards. 16 transducers are connected to these 8 channel cards. The chassis is connected to a PC by means of MXI-4 fiber optic cable and a PCI-8336 card.   I would like to samp...

write file + input file + write file
Hi, I want to write some latex command to a file (file1), input the file at the end of the document. These command shall write to another file (file2) and at a second run I use the file2. Whatever I have tried nothing works and I don't known why. The goal is to save a set of special commands and run them at the end of the document, because they use some values which are only available at the end! Can anybody please help me with that? Thanks in advance! I should be something like: \begin{document} \usepackage{style} \input{file2} %file exists from a previous run \end{document} style.sty: \newwrite\fileone \openout\fileone=file1.out \newwrite\filetwo \openout\filetwo=file2.out \newcommand{\writetofiletwo}[1]{% \write\filetwo{#1}% } \newcommand{\writetofileone}[1]{% \write\fileone{\writetofiletwo{some text}}% } \AtEndDocument{\closeout\fileone% \input{file1}% \closeout\filetwo% } Problem solved :-) \immediate\closeout before \input was required. greenux wrote: > Hi, > I want to write some latex command to a file (file1), input the file > at the end of the document. These command shall write to another file > (file2) and at a second run I use the file2. > Whatever I have tried nothing works and I don't known why. The goal is > to save a set of special commands and run them at the end of the > document, because they use some values which are only available at the > end! > Can anybody please help me with that? > Thanks in advance! &...

Labview 8 crashes when using Read Labview Measurement File
Hi All,   I am a new user for Labview. I installed Labview 8.0 from the CD (evaluation copy). I was just testing the sample code provided by NI. I opened the "Load from File and Display" example and I was trying to open the properties for the Read Labview Measurement File component when Labview crashed. I tried it a couple of times and everytime it happens the same way (when I double click the component or right click on it). I am using Windows XP with all the updates done. In the Windows crash report, the application version is 8.0.0.4005.   Other problem ...

Write Read XML Files not made in LabVIEW
I have an application that needs to be able to write and read xml files.  My application needs to be able to save the files in such a format that an outside program can use the values saved in the xml file.  On a system restart I need to be able to read in the values that were saved back into the program and populate the multicolumn list box it came from.  My issue really is just reading it back in from the file.    I could create a way of writing the xml file with the information in the format needed for the other program.  The problem really is, how do I handle reading in, and then populating controls with the information provided in the xml file with the xml file not in the LabView format.    The xml controls that have been provided by NI are not usable in this case.    Any suggestions or possible solutions would be greatly appreciated.  Thank you for all of the help ahead of time. ...

How do you read old Macintosh LabView files in LabView 6.1 for the PC?
I have a LabView application written for a version of LabView that ran on a Macintosh IIci that is no longer in operation. This Labview application is approximately 5 years old. We have LabView 6.1 for the PC. Is there some way to read the old Macintosh LabView files in LabView 6.1 for the PC? How would you recommend getting the files from the Macintosh platform to the PC? LabVIEW has been cross platform since version 3 (partially in version 2.2 and 2.5). LV 6.1 was not around 5 years ago, so the Mac application is probably in an older version. Generally a 1 or 2 version update just requ...

File reading and file writing
How should I model the following design problem : 1) I need to read/write a set of bytes from/to the binary file between a starting address and ending address. 2) Before writing the bytes I should pass file name with extension so that the bytes will be written in that file. 3) I need to reduce the number of I/O operation while reading/writing the bytes so that I could improve the performance. 4) How would I specify the error handling strategy? 5) What kind of design pattern I could employ to achieve the above requirements. If possible please point me to industrial strength c++ implementation regards, sri. Responding to Sri wrote: > How should I model the following design problem : > > 1) I need to read/write a set of bytes from/to the binary file between > a starting address and ending address. > 2) Before writing the bytes I should pass file name with extension so > that the bytes will be written in that file. > 3) I need to reduce the number of I/O operation while reading/writing > the bytes so that I could improve the performance. > 4) How would I specify the error handling strategy? > 5) What kind of design pattern I could employ to achieve the above > requirements. > > If possible please point me to industrial strength c++ implementation The purpose of these forums is not to do your classroom projects for you. Use what you learned in the course to try to solve the problem; it is part of the learning process. Also, this i...

One program to read 1000 enscribe file and write to plain text file with same same
have more than 1000 enscribe file along with there DDL's and COBOL library . All I need is to read this file with there corresponding structure and write to Plain file which can be uploaded to Wordpad/notpad. The question is if I use enform then for all this file I have to write enform with there structure ? So 1000 times I have to write enform query for all this file . Moreover ,in my case enform is giving 132 character output . is there any way that I just Input the filename and rest taken care by program like fetching record layout(DDL) and producing simple plain text file. On Ju...

Read a non text file
How can i convert a weird looking file to text file. I know the main info is stored in the file which looks like below. "����<t���Jч�ĉTV��y�rr��Ph"e~Wm>�E�0Y'p�=C�&�rؙ�<t�Fx�Zo$�+T��=���H Or�r6�S��m&7<�p�q��� u����w}�jlꥎ+_�����Z�?��v��ȉ�XC R�}�_�׍�:�$)�o}��NʨW\&���I@b�#T�B��8���J��CL�ypr\�]R���p\��S�XRҏ�f&?/��� 2�t�_��x���bG���Z�D�v�s [�"��N�# Ѡ�@)�����h'&%�(�)��c�ͼA ���zUZjLRyu�P̤� ��� �W��e�@1'�(��u-nG��p��2_�� T&�6+� _� d�(1Z�E@���h�F�z �~x�fG���s�b�/-+�@��0�%��6�wu�=��z���Y�0...

Open folder, read file, close file, open new folder, read file close file etc....
Hello, My current directory has several folders within it. Each folder has the same type of file within it. How do i go from the current directory, into one of the folders, edit the file, then come out of the folder, then go into another folder, edit a file then come out of the folder then into a new one etc etc etc. If this does not make sense i apologise and will try to explain my problem a little better. Any help would be much appreciated. Cheers, Phil Phil: I'm not sure it makes sense. Personally I use the mouse and keyboard for doing this. Were you thinking of something else?...

read multiple text files to one file
Hello, I am trying to read multiple text files with different names and write them to a single file. I have several n x 3 text files (n varies across files), and would like to read all these files and combine their columns into one m x 3 text file (m is the number of data points from all the files). Also, how can I perform a paired t-test on specific columns of text files situated in different directories ? Thanks ! On Apr 13, 1:42=A0pm, "Brian " <brianb...@gmail.com> wrote: > Hello, > > I am trying to read multiple text files with different names and w...

passing files into labview vi by opening the file
I have a labview exe that is installed on XP that can create/save files with an extension not recognized by windows. The files can be opened from within the exe but what I want is to double click(open) the file from explorer/desktop and have it opened in my vi. I know how to associate the file with windows so opening it will open the exe, but how do I pass this argument into my exe so my app can use it? Thank you, That's what I needed. I wasn't sure how to read from the command line once I passed something in. ...

convert text file to binary excel file
is there any method / tools good to convert text file (eg. .csv / ..prn) to excel file on the shell ? I try some perl modules , it seems OK , except this tools , could suggest other methods ? thx in advance. On 22 Nov 2004 22:18:09 -0800, a posting issued forth from mia456789@yahoo.com.hk... > is there any method / tools good to convert text file (eg. .csv / > .prn) to excel file on the shell ? I try some perl modules , it seems > OK , except this tools , could suggest other methods ? thx in advance. Depends on what you need... Simply renaming the file to *.xls will make excel think...

scanning text file and writing from .txt file
Hi, I have this data in a txt file: time = 0.0000E+00 mat.#= 1012 inten= 0.0000E+00 kinen= 0.0000E+00 eroded_ie= 0.0000E+00 eroded_ke= 0.0000E+00 x-mom= 0.0000E+00 y-mom= 0.0000E+00 z-mom= 0.0000E+00 x-rbv= 0.0000E+00 y-rbv= 0.0000E+00 z-rbv= 0.0000E+00 mat.#= 1013 inten= 0.0000E+00 kinen= 0.0000E+00 eroded_ie= 0.0000E+00 eroded_ke= 0.0000E+00 x-mom= 0.0000E+00 y-mom= 0.0000E+00 z-mom= 0.0000E+00 x-rbv= 0.0000E+00 y-rbv= 0.0000E+00 z-rbv= 0.0000E+00 mat.#= 1...

read from Text file using VB and Insert into SQL table until eof text file reach
Dear All, my text file like following, a1, b1, c1, d1, e1 a2, b2, c2, d2, e2 a3, b3, c3, d3, e3 a4, b4, c4, d4, e4 ................. and im going to insert this values into SQL Tables with columns, [a, b, c, d, e] how im going to do so? i use below src code to do but i can not get the next line and next line of text file until it finished insert Private Sub mot_Click() 'Shell ("C:\Program Files\Microsoft Office\Office11\MSACCESS.EXE c:\fisherdb. mdb /x ImportOpsNilai") 'frmPicCd.Show Dim db_connect ' Path = App.Path & "\ERP consumable code.xls" Dim objFSO Dim objFile, objTextStream Dim strContent Const ForReading = 1 Dim FileName, IEPath, strC1 As String FileName = "U:\bureport\buops\RepNilai.txt" Set objFSO = CreateObject("Scripting.FileSystemObject") Set objFile = objFSO.GetFile(FileName) Set objTextStream = objFile.OpenAsTextStream(ForReading, TristateUseDefault) If objFSO.FileExists(FileName) Then Set objFile = objFSO.OpenTextFile(FileName, ForReading) 'While Not objFile.EOF strC1 = objFile.ReadLine Dim word ReDim word(2) word = Split(strC1, ",") ' Dim t1, t2, t3 As String ' MsgBox RTrim(LTrim(word(44))) ' t1 = Replace(word(0), """", "...

ANN: LibXL
Hi All, We are happy to announce our new product: LibXL - Direct reading and writing of the Excel files LibXL from www.libxl.com is a high performance, royalty free library that c= an read and write Excel files. It doesn't require Microsoft Excel and .NET = framework, combines an easy to use and powerful features. Library can be us= ed to Generate a new spreadsheet from scratch Extract data from an existing spreadsheet Edit an existing spreadsheet Supports Excel 97-2003 binary formats (xls) and Excel 2007/2010 xml formats= (xlsx) Images, multiple sheets and much more is supported LibXL can help your applications in exporting and extracting data to/from E= xcel files with minimum effort. Library can be used in Clarion 5.5, 6.3, 7,= 8 with both legacy and ABC templates. We provide Clarion examples and prot= otypes bundled with the library. For more information check http://klarisoft.com/KSNews_190.htm Library cost including Clarion samples and prototypes is $199 To order please visit http://klarisoft.com/KSNews_193.htm Order now and you'll receive LibXL Clarion Class wrapper when it's released= for free -- Leonid Chudakov chudakov@klarisoft.com Cool tools and Clarion examples at http://www.klarisoft.com ...

Reading the excel file from simulink block and giving as output the modified excel file to another simulink block
Hi everyone, I have created one simulink block. In the simulink block i created one embedded matlab function and trying to read an excel file and extract some particular values and give it as input to another simulink block. Could somebody tell me how to do this. The size of the excel file keeps varying. I hope iam clear else please let me know. It is very important for me to solve this problem to proceed further. Please help. Thanks Desireddy. ...

read and write the same text file
read and write the same text file=20 Open a text file ,read the content ,then make some change on it ,then write= it back to the file ,now the modified text should only has the modified c= ontent but not the initial content ,so can we implement this by only set th= e mode parameter with open() function ?if yes ,what the parameter should be= ?if no ,can we implement this by only one with statement ? I implement this with 2 with statement as the following=20 replace_pattern =3D re.compile(r"<.+?>",re.DOTALL) def text_process(file): with open(file,'r') as f: text =3D f.read() with open(file,'w') as f: f.write(replace_pattern.sub('',text)) In article <c41028f7-e457-4a2b-99f4-c473eaadd128@googlegroups.com>, iMath <redstone-cold@163.com> wrote: > read and write the same text file > Open a text file ,read the content ,then make some change on it ,then write > it back to the file ,now the modified text should only has the modified > content but not the initial content ,so can we implement this by only set the > mode parameter with open() function ?if yes ,what the parameter should be ?if > no ,can we implement this by only one with statement ? > I implement this with 2 with statement as the following > > replace_pattern = re.compile(r"<.+?>",re.DOTALL) > > def text_process(file): > > with open(file,&...

Excel file read/write?
As far as I know, there is pyXLWriter for writing and xlrd for reading. Is there such thing so that one can open an Excel file into memory and read/update any sheet/cell on the fly. One analogy to this is the ConfigParser module. Any info would be much appreciated. Podi wrote: > As far as I know, there is pyXLWriter for writing and xlrd for reading. Most folk would seem to be using pyExcelerator rather than pyXLWriter. It is much more up to date, it just hasn't been worked on for a year, whereas pyXLWriter is obsolete (doesn't write latest Excel file format) and is deliberately...

excel read and write to labview
can anyone help me. &nbsp; I&nbsp;have these following problems: 1. how to save my FFT graph into data? 2. how to get my data after tab delimited it into excel file from labview? &nbsp; &nbsp; Henry thesislatest.vi: http://forums.ni.com/attachments/ni/170/133618/1/thesislatest.vi Hi,&nbsp;&nbsp;&nbsp; In trying to open your file there are a large number of sub-vi's that aren't in the standard distro. Could you do a "Save with options", "Development distribution" and send the resultant ".llb" file? As far as what you are tryi...

write LabView measurement file
Hello I am traing to save s signal with the help of WRITE LABVIEW measurement fiel. How do I limit the file size? I want a file of 2 Mb, but I only recive a file of 21 kB. I also tried with Open/replace/create , write, close functions, but also don't know how to make the limit ( 2Mb) &nbsp; If someone knows please help. &nbsp; &nbsp; Boris Hi Boris, When you double click on the "Write to LabVIEW Measurement File.vi" a configuration window appears. In this window one of the options you can select is "Save to series of files (multiple files)". Once this opt...

Read FITS files with LabView
Hi, &nbsp; is there any possibility to read&nbsp;FITS files with LabView? &nbsp; FITS (Flexible Image Transport System) is a data format designed to provide a means for convenient exchange of astronomical data between installations whose standard internal formats and hardware differ. &nbsp; I feel lost. Can someone give me an idea? &nbsp; Thanks ...

how to read one file and write the same file 10 times
Hi friends i have one file i wanna make 1000 copies of the same file so how can i do that with the help of read and wrtie in matlab can anybody tell me how to do it. Satya: <SNIP terrifically prolifically... > i have one file i wanna make 1000 copies of the same file so how can i do that... one of the many solutions help photocopier us ...

Web resources about - read text file through Labview and then write to an excel file - comp.lang.labview

Angry GOP Voters and Donald Trump – The Enemy of My Enemy is Not My Friend
I’m angry. I’m actually damn angry. I’m angry that Americans have twice voted into the highest office in the land a man who is demonstrably anti-American, ...

Even CEO Tim Cook is suggesting Apple could be forced to build a 'surveillance OS'
The war of words between Apple and the FBI continues to heat up ahead of next week's March 22 hearing over whether Apple should help extract ...

Star Wars: Trials on Tatooine is an Interactive Virtual Reality Visit to a Galaxy Far, Far Away by ILMxLAB ...
ILMxLAB has released the first trailer for Star Wars: Trials on Tatooine , their interactive virtual reality experiment that allows you to visit ...

Kalamazoo shooting suspect sues Uber, says he was possessed by its app
A man who police say told investigators that 'a devil figure' on Uber's app was controlling him when he allegedly killed six people in western ...

Sony might allow PS4 cross-network play with PC, Xbox One
Earlier this week, Microsoft announced that the PS4 and Xbox One would be capable of cross-platform play. Is Sony going to turn this happy relationship ...

North Korea Sentenced Otto Warmbier To 15 Years: Obama Demands His Release
North Korea sentenced Otto Warmbier of Ohio to 15 years of hard labor after a one hour trial on Wednesday. Warmbier, a 21 year-old college student, ...

Apple expands hybrid cloud, moves from Amazon to Google Cloud Platform
Amazon.com loses another one, as Apple moves most of its AWS fleet to Google Cloud Platform. Chalk up a victory for Diane Greene, who we imagine ...

Nike is finally making self-tying shoes but you’ll have to put up with lights too
Nike is yet to deliver on its promise to bring us the self-lacing MAG shoes made infamous by Michael J Fox in Back to the Future II, but it’s ...

They must be hoping for the luck of the Irish! Racegoers dress as leprechauns to celebrate St Patrick's ...
Racing enthusiasts paid tribute to Irish culture on the day dedicated to the country's patron saint, with many sporting shamrocks to decorate ...

SeaWorld Ending Signature Killer Whale “Shamu” Shows; Will Stop Breeding Orcas
For decades, SeaWorld parks have been associated with the visual of orca killer whales — most famously Shamu — jumping into the air for the amusement ...

Resources last updated: 3/17/2016 2:38:55 PM