f



Tab control in one of the tabs of another tab control

One of my colleagues is working with a tab control. He has several tabs. He is trying to embed another tab control inside one of the tabs of the first tab control. He had placed the second tab control inside one of the tabs of the first tab control. But the problem is that the second tab control does not show up (unless one goes to the block diagram and double clicks the second tab control, only then does it shows up; when the vi is closed and reopened its again not there). I told him that I had never seen such functionality (a tab control inside another tab control) in any application but is it somehow possible. All this is required while the VI is not running and is being developed (of course it should work at run time, but this functionality must show while the VI is not running, i.e., this functionality should be non-programmatic. Is it possible. Thanks for your time.
0
x9561 (148442)
5/13/2008 9:40:05 AM
comp.lang.labview 35213 articles. 1 followers. vasusachin24 (1) is leader. Post Follow

7 Replies
863 Views

Similar Articles

[PageSpeed] 24

Hi rashid, yes it is possible. See the attached example. I see no problems with it.Hope it helps.Mike


Untitled_LV71.vi:
http://forums.ni.com/attachments/ni/170/323165/1/Untitled_LV71.vi
0
x9561 (148442)
5/13/2008 10:10:05 AM
Thanks  <a href="../view_profile?user.id=88992" class="auth_text" style="font-weight: bold;" target="_blank"> MikeS81</a>! Yes you are absolutely right. Your VI is working perfectly. I wonder what has my friend done to get such behaviour as he is getting. Strange! Thanks for the help!Have a very nice day!
0
x9561 (148442)
5/13/2008 10:10:07 AM
Hi rashid, can you upload your vi, maybe someone found the problem?ThanksMikeMessage Edited by MikeS81 on 05-13-2008  12:02 PM
0
x9561 (148442)
5/13/2008 10:10:08 AM
I'll guess that one tab is ON the other not IN the other.
Ben
0
x9561 (148442)
5/13/2008 11:10:05 AM
Yes that's correct, Ben. Sorry for using the wrong preposition. Thanks for reply!
0
x9561 (148442)
5/13/2008 12:10:07 PM
So, what was the result? :smileyhappy:
Were you able to solve the problem?
0
x9561 (148442)
5/15/2008 9:10:11 AM
Hai Rashid,
As mike told and&nbsp;if you want you can attach the&nbsp;scenario which will help the others who will face similar kind of problems in the near future.
Thanks,
Mathan
0
x9561 (148442)
5/15/2008 9:40:07 AM
Reply:

Similar Artilces:

tab control inside another tab control
Hi. Is it possible to put a tab control inside another tab control. I tried it several times, but for some reason this doesn't seem to work. Can someone confirm this, or tell me what the trick is. Thanks. -- Georges The only way I know to do this is to put a subform on the first tab control. Then you can put your second tab control on the subform. If you do this repeatedly, however, you will find the form loading rather slowly. HTH - Turtle "Georges Heinesch" <news@geohei.lu> wrote in message news:3fe82fb8$1_2@news.vo.lu... > Hi. > > Is it possible to...

Tab control within another tab control
I am creating a form with a tab control containing 10 tabs. and what I want to do is on only on of the tabs, I want a sub section of tabs. So what it ends up being is one main tab control with another tab control embedded into only one of the tab pages. The problem I am getting is when I insert the sub section tab control into one of the tabs from the main tab control, the sub section tab control appears in every tab in the main tab control. Can anyone help? What do I need to do so it only appears in one tab, not all. Thanks As you found, you cannot place a tab control on one of the pages...

tabbing order in tab controls
Hi How can I set the tabbing order of controls in a tab control on the front panel when having several other controls on the front panel. Right-click on the tab and select "Reorder controls In page" from the menu that pops up. This is not exactly what I meant. When I'm creating a local variable I can choose its destination (right-click - select item). Because there are so many I would like to reorder the tabbing order to choose the correct on the top. All this action are taken in the block diagramm. From the edit menu, select Set Tabbing order changing the tabbing order will also change the order the variables are listed when you want to list or select a local variable ...

Vertical Tabs on Tab Control?
Hi Folks: I've used conventional horizontal tabs on one application. Now I'd like to have a row of tabs, representing each letter of the alphabet, running down the right side of a tab control. These are owner drawn tabs. I have questions. I want a single line of alphabet tabs. If the control shrinks to too small to show all of the tabs, I'd like them to display a ragged edge, and arrows in order to scroll them. Instead, multiple lines of tabs are drawn. The Resource Editor's "Tab Control Properties" window has "Multiline...

Tab Indexing in a Tab Control
Anyone know why when I set my tabs index in my tab control (I have 3 tabs on the control) the numbering gets messed up when I save the form changes? I thought each tab on the control had an independent tab index, I guess not. Marcus ****** Just a suggestion, the Tab Index for a container (Tab Page) is different than the Page Index for a Tab Control. You might be thinking that the Tab Index is related to the Tab Pages. The order of the pages is Page Index. (Right Click Page Order) The order of the controls on a page, form or other container control is Tab Index. (Right Click Tab Order) T...

Getting XP look with tabbed dialog control and tab strip control
I know how to use a manifest file to get the XP look for the Windows Common Controls 6 group of controls but I also have both the tabbed dialog and tab strip controls in my app and I want those to take on the XP look as well. Does anyone know how? Also, while I am able to get the XP look through a manifest file in my app's folder I should be able to do this without the file having to be in the app's folder. I've read it has to do with compiling with a resource file but I don't know how to do that. Can anyone offer any assistance? Thanks! ...

Tab Tab
How can I direct the output from pressing tab tab to a file? Op 4 Aug 2004 12:39:13 -0700 schreef gnosis: > How can I direct the output from pressing tab tab to a file? gawk 'BEGIN {print "\t\t"}'</dev/null >file -- There's no place like 127.0.0.1 Gerard Wassink http://linux.family.filternet.nl http://freeware.family.filternet.nl Linux counter #360967, "In a world without fences, who needs gates?" gnosis wrote: > How can I direct the output from pressing tab tab to a file? I'm not sure I understand the question..... If you mean: 'put 2 TAB (0x09) characters into a text file from a command prompt', then echo -e '\t\t' >somefile or echo -e '\t\t' >>somefile If you mean: 'the output of the BASH 'TAB-TAB' "completion key combo", then no. The BASH TAB-TAB key combo is meant as input to BASH, so BASH interprets the TAB-TAB combo before you have a chance to supply any re-direct operators for the command. Regards, Larry -- Anti-spam address, change each 'X' to '.' to reply directly. ...

How can I set the tab order of text box controls on each page of a tab control?
I need to be able to select the tabbing order of individual controls on a single page of a tabbed control. How?? In LV 6.1 an up you should be ablel to right click on the edge of the tab control when the tab-page in question is selected. The bttom selcetion in the pop-up is "Reoder controls in page..." selecting this option will switch editing modes to allow you to specify the ored, just like in a cluster. I seem to remeber in older versions you had to drag the tabable controls off the tab control, specify the tabbing oder and then drag them back on. The oldest version I have on ...

Tab order on multirow tab control
Is there a way to stop the default action of a multirow tab control whereby the row with focus moves to the front of the tabs? I find this behaviour annoying and confusing to the user and am at a loss as to why MS has designed their tab controls like this. Wayne wrote: > Is there a way to stop the default action of a multirow tab control > whereby the row with focus moves to the front of the tabs? I find > this behaviour annoying and confusing to the user and am at a loss as > to why MS has designed their tab controls like this. ALL multi-row tabs act this way. How else can y...

Change values of Tabs on Tab Control
I have a LabVIEW application where it is possible to change the language on the front panel, in connection with this I want to change the names/labels of the Tabs on a Tab Control. Is this possible? Hi Labbie, yes it is possible. See the attachment. Mike Unbenannt 1_LV80.vi: http://forums.ni.com/attachments/ni/170/311358/1/Unbenannt 1_LV80.vi Awesome all... got what i needed. &nbsp; Peace, &nbsp; Pete ...

Re: tabbing order in tab controls
Is there a way to change the tabbing order without having the order on a list or local change also? I didn't take that into account when making the program, should have ordered all the control before wiring it all up :-/ Hi leachdor,When you change the tab order of a specific control in LabVIEW, it must then re-order the other controls in order to ensure that each tab order value is only applied to one control, and that there are only as many tab stops as there are controls.&nbsp; As such, there is no way to simply re-order a single control without modifying other controls. Hi and thanks for the response. I think I may have explained the behavior i'm seeing wrong.&nbsp; Changing the tab order, you have those two little boxes the first showing the changed order number, and the black background one that shows what it was previously.&nbsp; Each time you change one, yep you have to change the order of the rest otherwise you might tab and select two fields at once!The behavior I'm not sure about though, is when I change them to the proper order on the front page, it changes my block diagram.&nbsp; For example if I have a cluster with 3 items in it, and I change the tab order of the items inside that cluster.&nbsp; Then if I had previously used an "unbundle" function prior to the tab order change, and it was all wired up with item 1 at the top, item 2 in the middle output, and item 3 as the bottom output - AFTER the change, those controls...

Tab Control
Hi, all! &nbsp; I would like to customize Tabs on the Tab Control. More exactly - I would like to add bevels to the tabs as shown below: &nbsp; <img src="http://vi-lib.com/forForum/TabControlwithBevel.jpg"> &nbsp; Is it theoretically possible? May be&nbsp;some workarounds exists? &nbsp; with best regards, &nbsp; Andrey. Hi, TiTou, This requirement coming from corporate UI Guidelines, where shapes of Tabs strongly predefined. I can do required "skinning" for most controls which can be customezed, but unfortunately not for Tab Control... Andrey...

Tab control tabs dissapear when clicked
I have yet another problem with the infamous tab control in my Access 97 database. I have a form with a tab control with 4 tabs on each tab is a sub form bound to a form. When the main form loads the vertical scroll bar moves the main form down just low enough to were one can't see the tabs on the tab control. Once you scroll back to the top of the main form and click on one of the four tabs the sub form on that tab becomes visible but the same scenario as above happens. The main form vertical scroll bar once again moves down just low enough to were you can't see the tabs until ...

Executing a Script when clicking a tab in Tab Control
Is it possible to execute a script when clicking on a tab when using the new Tab Control function in FMP8? place an invissible rectangle on the part where you want to click, define this as the button. Ursus "Steve" <snl930@hotmail.com> schreef in bericht news:1134101672.975937.311770@g49g2000cwa.googlegroups.com... > Is it possible to execute a script when clicking on a tab when using > the new Tab Control function in FMP8? > ...

working with a tab control with no tabs in design view
I'm using a tab control in Access 2000, and the user requested to have buttons in the form header, instead of the built-in tabs (so that when they scroll down, they can still switch tabs). Now, this works fine. However, when I'm in Design View, I can't access the tabs without changing the tab control's Style back to Tabs. But I want to be able to place controls in that space at the top where the tabs used to be. But if I need to turn the tabs back on when I need to make design changes, then I can't do that. So the result is wasted space at the top of the tab control,...

blinking tabs in an owner drawn tab control
Hi all, I need to blink tab or atleast tab text in an owner drawn CTabCtrl derived Tabcontrol. Please guide me how to do it. Regards Shoeb On 12 sep, 09:19, "shoeb" <sh...@octro.com> wrote: > Hi all, > =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 I need to =A0blink tab or atleast tab tex= t in an owner drawn > CTabCtrl derived Tabcontrol. Please guide me how to do it. > WM_TIMER where you change a brush handle and redraw the Tab (RedrawWindow () for example)) In WM_DRAWITEM, FillRect() with the brush handle for the itemID you want. ...

Tab control: How do I read the name of a selected tab??
Hello, &nbsp; I've got a tab control with 10 tabs and around 20 controls on each tab. I'm using an event structure but the amount of possible events (about 200) drives me crazy. &nbsp; Please tell me if the following is possible: &nbsp; I want to use a case structure to determine which tab was selected and start an event structure for that tab only. I'd only have 20 events now. When the tab control is pressed the event structure is killed (the while loop finishes), and the outer case structure determines what event structure&nbsp;to fire up now. Is this possible???...

Refs to controls on tab control
I'm really stumped. I have been able to get all of my references to all my controls with property nodes - even controls inside clusters for all of the controls on a vi front panel. However, when I move these very same controls onto a tab control&nbsp;I can't seem to figure out how to get these same&nbsp;references! I can only get the tab control ref. :smileyindifferent: &nbsp; &nbsp; <img src="http://forums.ni.com/attachments/ni/170/243049/1/Cotrols%20on%20pages.JPG"> BenMessage Edited by Ben on 04-20-2007 05:01 PM Cotrols on pages.JPG: http://forums.ni.com/attachments/ni/170/243049/1/Cotrols on pages.JPG ...

Syntax of control on tab controls
I have a form "frmturnover" on which there is asubform "subfrmturnover" which has three tabcontrols say Page1, Page2 and Page3. There is control "control2" on Page2 that when its is entered I want to check if it is the same value as a control "control1" on Page1 and then show a pop up box if they don't match. I can work out the code for the message box but I'm getting a little lost on the syntax for referring to the controls on the pages of the tab control. I also want to check the value of Control2 on page2 with the vale of control3 on a page1 o...

Names of textboxes on tab-pages within a tab control?
I have a tab control named TabCtl210. It has 3 tabs. named Page211, Page212 and Page213. Each of those 3 tab-pages has a textbox control named Page1HomeSpot, Page2HomeSpot and Page3HomeSpot respectively. I got an error #2109: "There is no field named Page1HomeSpot in the current record" There's only one line of code in the entire form module that references the control: Private Sub Page1() DoCmd.GoToControl ("Page1HomeSpot") End Sub Under what circumstances would Access give em this error? Try: Me.Page1HomeSpot.SetFocus If that still fails, and you are certain...

How can I move a control from one page of a tab to another?
Hello I have an Access 2000 application. The form has got a tab with 3 pages. There are several text boxes and command buttons on one page. I need to move them to another page (to free form space for another control). Is it possible to move controls from one page of a tab to another, or I'll have to re-create them? If it is possible, please could you advise, how? I have tried to move one text box. It happily vanished. Thank you. Galina "Galina" <galina.self@cityofbristol.ac.uk> wrote in message news:cc765639.0311190741.458ddff7@posting.google.com... > Hello > I have ...

Control/Indicator descriptions are not imported or checked from LabVIEW to NI RG when they are placed on Tab controls
Hi Allen, I am currently testing Requirements Gateway. As it seems it does not find any controls placed on a tab control to see if it is covered or not. Is there any reason not searching for controls placed on tab controls? We have VIs iterating over complex Front Panel structures to find all controls. Maybe we can add this functionality to NI RG LabVIEW interface. Is there anyone can help in this? Andras ...

Re: Password Protect a Single Tab in Dialog Tab Control
I just wanted to comment on the use of passwords at start up.&nbsp; I have a program in which I password protect the setup variables with the property nodes using a sub vi to enable / disable the 'visibility' of the controls.&nbsp; the reason for this is that the program is running a system in line with a production facility providing data on QC.&nbsp; Therefore it is never shut down or re-started.&nbsp; For me I have to control access while the software is running and LabView does a great job letting you do this by hiding and enabling certain controls. BTW, I do all of this without the use of local variables. &nbsp; Another method to do this is to use the vi ini file vi's.&nbsp; LabView allows you to write custom setup files with custom tags etc for all of your setup variables.&nbsp; Your program can read this file when it starts up.&nbsp; You can then have another vi dedicated to the changing of the parameters in the file.&nbsp; Then just password protect this vi.&nbsp; Your main program can be signaled to re-load the configuration file if the config vi. changes it.&nbsp; I have done it this way before and it works very well too.&nbsp; Don't try it with a program that requires precise timing as disk access in LabView can be slow. &nbsp; Victor Rundquist -using LabView since version 5 ...

Tab Control and Rectangle Hiding Controls
I'm trying to change the back colour of a tab control in Access 2010 by using a rectangle. I've selected the tab control (not an individual page) and pasted the rectagle (solid with required colour). I then send the rectangle to the back and then the tab control to the back. The problem is that most (but not all controls remain hidden) on each tab. Subform and list boxes are visible, but labels and text boxes aren't. I've done this before in another application, but can't remember how I did it. Any ideas? -- Bob Darlington Brisbane On Thursday, June 20, 2013 1:57:59 AM UTC-5, Bob Darlington wrote: > I'm trying to change the back colour of a tab control in Access 2010 by > > using a rectangle. > > I've selected the tab control (not an individual page) and pasted the > > rectagle (solid with required colour). > > I then send the rectangle to the back and then the tab control to the back. > > The problem is that most (but not all controls remain hidden) on each tab. > > Subform and list boxes are visible, but labels and text boxes aren't. > > I've done this before in another application, but can't remember how I did > > it. > > Any ideas? > > > > -- > > Bob Darlington > > Brisbane Not sure I understand your issue. Anyway, check in properties and set the background to transparent. ...

Web resources about - Tab control in one of the tabs of another tab control - comp.lang.labview

Control - Wikipedia, the free encyclopedia
Text is available under the Creative Commons Attribution-ShareAlike License ;additional terms may apply. By using this site, you agree to the ...

From Armenia to Australia, how the mob controls the trafficking of ice into Australia
In America, they are called the "Five Families". The term refers to the five major New York organised crime families of the Mafia, with a history ...

From Armenia to Australia, how the mob controls the trafficking of ice into Australia
In America, they are called the &quot;Five Families&quot;. &nbsp;The term refers to the five major New York organised crime families of the Mafia, ...

How-To: Reduce iPhone screen brightness beyond what’s possible in Control Center or Display & Brightness ...
... about sharing in the past, involves reducing iPhone screen brightness beyond levels that are possible with the standard brightness slider controls. ...

Stagefright-based ‘Metaphor’ exploit can take control of your phone in just 15 seconds
The old Android malware beastie is at it again, with researchers uncovering a new Stagefright-based exploit that can be used to take control ...

Creative Control explores the dark side of augmented reality—with humor
... Here's what the future looks like: collecting data on people while wearing AR glasses. 7 more images in gallery In the film Creative Control ...

4 Ways to Control Your Mind and Lose Weight
... after a week of eating the same things. I have found that almost anytime I have plateaued, a cheat meal has broken the plateau. Gain Control ...

This man has been commuting to work through a robot for two years, and he controls it from 3,000 miles ...
... his company Double Robotics is headquartered. Instead, he’s 2,900 miles away in Brooklyn, NY, with his two dogs and spouse, where he controls ...

The Latest: Officers regain control of Alabama prison dorm
MONTGOMERY, Ala. (AP) — The Latest on the disturbances at a prison in Alabama where inmates have stabbed each other and prison authorities and ...

MIT, Harvard researchers push new way for users to control access to personal data
Cryptography researchers at MIT and Harvard have developed software called Sieve that is designed to help users keep track of encrypted personal ...

Resources last updated: 3/19/2016 10:31:52 AM