f



What causes inconsistent error: Error loading "mydll.dll" Invalid access to memory location.

I have a set of sample code vis which are wrappers around an external dll using the call library function nodes.  These work in all versions of LabVIEW from 6.1 to 8.2.  In version 8 and 8.2, there is an inconsistent error which appears after a vi is opened, run successfully, closed and then re-opened some time later - all without closing LabVIEW.  The error is reported without an error number as 'Error loading "myDll.dll". Invalid access to memory location.'  If LabVIEW is closed, reopened and the vi loaded again and run, it works fine.  The same error occurs if a second vi calling the same .dll is loaded and run after the first is successful.
 
Since the vi works just fine the first time it is opened, why does this error occur the second time?  What do I have to change so that I don't  have to close LabVIEW every time I want to run a different VI?
 
Thanks in advance.
 
Mike.
 
 
0
x9561 (148466)
4/25/2007 10:10:10 PM
comp.lang.labview 35213 articles. 1 followers. vasusachin24 (1) is leader. Post Follow

0 Replies
595 Views

Similar Articles

[PageSpeed] 56

Reply:

Similar Artilces:

Labview "Fatal Internal Error "memory.cpp" line 1038
Hi,   This is an example file provided by NI and can be found in Labview 8.2\examples\instr\niHSDIO: Dynamic Generation.lib. Inside this library, there is a file called "Dynamic Generation.vi". If I copied "Dynamic Generation.vi" to other place, the labview will crash. Error message:   "Fatal Internal Error. "memory.cpp". Line 1038. Labview version 7.1.1. You will lose any unused work, please contact NI, etc, etc"   In the mean time, the Windows freeze. Mouse right click no response. No status bar at the bottom of the screen. The whole desktop is blank. All icons on the desktop disappeared. I have to log-off and re-login to re-active everything.   I also tried to copy other VI's in other library files. Same thing happened.   Thanks, Jing I was using Labview 8.2.1 when I had this crash, though I have Labview 7 installed in the same computer. When I "copy the file to some other place", I mean: Click the *.vi file, ctrl-c and ctrl-v to some other directory. Thanks, Jing ...

Error Code "1097.....this might corrupted LABVIEW's memory.........." appears after exit the labview and re-start labview
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;I have a probelm when I use the "tool/import shared library(.dll)" wizard&nbsp;to generate the&nbsp;API from C. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; The API &nbsp;works correctly when I complete the wizard, but after I exit labview and re-start labview to run&nbsp;the API&nbsp;again. The error 1097 code "......this might corrupted LABVIEW's memory.............."appears. &nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;The only solution now is to re-generate or update the wizard to&nbsp;generate the API. &nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;I try to find the answer in &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; <a href="http://digital.ni.com/public.nsf/allkb/58596F5D41CE8EFB862562AF0074E04C?OpenDocument" target="_blank">http://digital.ni.com/public.nsf/allkb/58596F5D41CE8EFB862562AF0074E04C?OpenDocument</a>&nbsp; &nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; The paragraph in above article shows ........................... &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; "LabVIEW does not crash until it is closedThe most likely problem is that the DLL function being called has corrupted th...

&quot;Invalid Drive&quot; error while installing LabVIEW
&nbsp; Installing LabVIEW 6.1 on an NT4 machine with administrator previldeges. &nbsp; Comes up with error "Error 1327 : Invalid drive H:\"&nbsp; ....Dialog Box 1 &amp; then "Error 1603 occurred while installing NI LabVIEW 6.1. Continue installing other products ?" ..... Dialog Box2 &nbsp; Same thing happens while installing RunTime Engine 6.1 &nbsp; Error messages included in attached file. &nbsp; Any insights? &nbsp; Thanks &nbsp; &nbsp; &nbsp; Invalid Drive Error While Installing LabVIEW.doc: http://forums.ni.com/attachments/...

&quot;LabVIEW load error code 3&quot; USB drive
Hi Folks, &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; I'm not expecting any solution here, though it would be nice... &nbsp; Twice, recently, I've lost a top-leve VI due to the error below.&nbsp; I suspect the problem is related to working off a new USB drive - a 2G Lexar Firefly.&nbsp; For&nbsp;two or three years a Lexar Jumpdrive Elite (256M) served me flawlessly, after moving to the Firefly ~2 weeks ago, this error&nbsp;has happened twice.&nbsp; BTW,&nbsp;the Firefly is also extremely slow -&nbsp;amazingly&nbsp;slow, considering how much newer it is. &nbsp; If any wiz-kids have dissected the&nbsp;VI binary well enough to, possibly, identify/repair problems, it would be very much appreciated! &nbsp; <img src="http://forums.ni.com/attachments/ni/170/291448/1/LoadErrorCode3.JPG"> &nbsp; Cheers!Message Edited by tbd on 12-19-2007 09:45 PM LoadErrorCode3.JPG: http://forums.ni.com/attachments/ni/170/291448/1/LoadErrorCode3.JPG Hi Phillip, &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Thanks for the heads-up re:&nbsp;background-apps slowing-down drive.To be honest, I don't know how to find/disable such apps. but now know to look. Re:&nbsp;Lexar Firefly - it's&nbsp;slow by design, though there's no warning on the package when you buy it.&nbsp; Here's the response from their Customer Support: " Jumpdrive Firefly is a non-speed rated Jumpdrive and is made...

Why do I receive a &quot;Fatal internal error: &quot;fpsane.cpp&quot; line 399&quot; when saving?
Why do I receive a&nbsp; "Fatal internal error: "fpsane.cpp" line 399" when saving my VI? &nbsp; Thank you. Gustavo Hi Chris, But I could not solve the error that way. Actually, Labview is crashing with this error at any time when I am writing my VI. It simply crashes even if the VI is not running. I think the problem is not in my VI, because&nbsp;it runs normally in another machine, but must be with the Labview installation. I have reinstalled Labview three time already and the error continues. Any other ideas? Thanks, Gustavo hum... not yet. &nbsp; I reinstalled LAbview 8.2 for the 3rd time... nothing happened. The VI I am trying to run is the example 4128.vi we can find in the forum. It is still crashing with the same error when I try to save or save as... or sometimes before the VI starts to run when I do any alteration. I think the error might be related to saving the VI. The problem happens to other VIs as well, but only those that are using IMAQ. &nbsp; Hope you can help me... Tks, Gustavo I am agree with <a href="http://forums.ni.com/ni/view_profile?user.id=91046" target="top"> gutoassi</a> , even though labview 8.2.1 releases are very useful, it still have something to be depurated, my VI is ok and I have the same error fpsane.cpp line 399. In order to give a clue with this issue, I am working with CINs and visual C++, some times it just work fine but in a very inconsistent way it crashes som...

"Invalid access to Memory Location" and Printui.dll
This is resolved. In doing research on why the CONSISTENT error occurred on Printer installs, I discovered that systems with remnants of LanTastic based programs and / or a system with HD corruption could cause the file "printui.dll" to be replaced or corrupted. THIS caused the failed installations under any and all users and ALSO caused the "ADD PRINTER" icon to NOT function/install/begin install (nada). Several of the technotes on this problem indicated that running sfc/ scannow from the RUN line would cause XP to evaluate all system files. And replace the ones that had been illegally overwritten or damaged. (sfc /scannow = system file check) . It worked the first time and all is well. HTH someone. -- Rich "Doc" Colley mailto: pc-dc-doc@nospam.comcast.net ...

Labview 8.5 error on save: &quot;Cannot load help information of [filename].&quot;
Hi all, &nbsp; &nbsp;I was working on a VI in Labview 8.5 when the program (Labview) crashed. When I relaunched Labview it asked me if I wanted to recover the VI&nbsp;I was working on,&nbsp;I said yes and the recovered VI runs fine, but I cannot save it. When&nbsp;I try to Save or Save As I receive the following error message: "Cannot load help information of [Filename]" and my only option is "Cancel Save". If I click "Cancel Save" Labview returns a "File not Found error". Until the recovery, I could and did save the file with no problems. It now seems that I am locked out of the file. &nbsp; &nbsp; I have a backup, but it is does not contain the 2-3 hours of work I put in before the crash. Does anyone have a work-around, or know the source of this error? This is the second time I have seen it on a recovered file (the first time I had a fresh backup, so it wasn't a big issue). &nbsp; Here is a dump of the "Referencing files in the project or its dependencies" from the Save As dialog: &nbsp; [Project Name].lvprojreplay2-offsets.vi:Instance:6replay2-offsets.vi:Instance:5replay2-offsets.vi:Instance:3replay2-offsets.vi:Instance:2replay2-offsets.vi:Instance:4replay2-offsets.vi:Instance:1replay2-offsets.vi:Instance:0 &nbsp; Thank you, Tim I'm having the same problem. I came here to see if there was any information about this problem, and found the previous message. Lucky for me, I&#...

How to use &quot;GetLastInputInfo&quot; in &quot;user32.dll&quot;
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Hi, &nbsp; I need to logout user if he doesn't make action during 5 minutes, "GetLastInputInfo" method in the "user32.dll" library, return the tick of the last action, so I can&nbsp;know the inactivity time of the login user. &nbsp; But I try to using "Call Dll function" item in Labview 8.1, and each time I run VI, Labview crash. &nbsp; Next, is information about the method : &nbsp; DLL###############################User32.dll &nbsp; Syntax###############################BOOL GetLastInputInfo(PLASTINPUTINFO plii); &nbsp; Parameters###############################plii : [out] Pointer to a LASTINPUTINFO structure that receives the time of the last input event. Private Type LASTINPUTINFO &nbsp;&nbsp;&nbsp; cbSize As Long &nbsp;&nbsp;&nbsp; dwTime As Long End Type Return Value###############################If the function succeeds, the return value is nonzero.If the function fails, the return value is zero. &nbsp; Remarks###############################This function is useful for input idle detection. However, GetLastInputInfo does not provide system-wide user input information across all running sessions. Rather, GetLastInputInfo provides session-specific user input information for only the session that invoked the function. &nbsp; You can see also my VI source. &nbsp; GetLastInputInfo.vi: http://forums.ni.com/attachments/ni/170/31...

How can I modify the &quot;Type definitions&quot; of &quot;Function Prototype&quot; if I want build a DLL in Labview 8.5.1.?
Hello,We have a library with several VIs (API - Interfaces to our Real Time Target). This VIs we provide to our customer to generate own VIs to control the Real Time Target.Now we want to provide the functionality of this VI-library as DLL to our customer. The problem is, that labview use self definite name of type definitions. Also if I use "strict Type definition".Example:void GetOutputValues(VARIANT *Scale_In, int32_t ModelNr, uint16_t SignalID[], TD1:smileymad: *errorIn, VARIANT *Scale_Out, TD2 *Data, TD1 *errorOut, int32_t len)It is possible to modify "TD1" and "TD2"? I want to give useful names.GreetingsSteffen Hi Steffen, &nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Try&nbsp;editing the .h file as follows: CHANGE FROM: typedef struct {&nbsp;LVBoolean status;&nbsp;long code;&nbsp;LStrHandle source;&nbsp;} TD1; CHANGE TO: typedef struct {&nbsp;LVBoolean status;&nbsp;long code;&nbsp;LStrHandle source;&nbsp;} TD1; typedef struct {&nbsp;LVBoolean status;&nbsp;long code;&nbsp;LStrHandle source;&nbsp;} LVErrorCluster; then your GetOutputValues prototype becomes: void GetOutputValues(VARIANT *Scale_In, int32_t ModelNr, uint16_t SignalID[], LVErrorCluster *errorIn, VARIANT *Scale_Out, TD2 *Data, LVErrorCluster *errorOut, int32_t len) If your source-code doesn't refer to "TD1", then&nbsp;you probably won't need to keep the TD1 prototype! Cheers. ...

LabVIEW crashed when openning XControl Facade, and Init VI
XControl_Fatal error.PNG: http://forums.ni.com/attachments/ni/170/261642/1/XControl_Fatal error.PNG XControl_Fatal error1.PNG: http://forums.ni.com/attachments/ni/170/261642/2/XControl_Fatal error1.PNG ...

error loading C:\Program Files\....\resource\ivanlys.dll &quot;a dynamic link library initialization routine failed&quot;
Hi all, After installing my labview, I tried to use the tutorial:when I launch (double click on the create new menu)&nbsp;the "Generate and Display VI" I get the error message: error loading C:\Program Files\....\resource\ivanlys.dll&nbsp;&nbsp; "a dynamic link library initialization routine failed" This is the same if&nbsp;I try to launch other VI. &nbsp; What can I do? &nbsp; Thanks&nbsp; &nbsp; ...

The .NET assembly expected to be at &quot;&quot; was loaded from &quot;NULL&quot;
Hello, &nbsp; I use NET Components in a LabVIEW 8.2.1. VI and all work very fine. Now I convert it to LabVIEW 8.5 and I always get a warning, when open it. The Warning is : &nbsp;The .NET assembly expected to be at "" was loaded from "NULL". As example I add my CallbackVI in the Attachment. If somebody has an idea to remove this warning I would be thankful. &nbsp; Thanks in advance TE_NET_ToolStrip.ClickCallback.vi: http://forums.ni.com/attachments/ni/170/304243/1/TE_NET_ToolStrip.ClickCallback.vi Oh I was glad to early. The problem was only solved one time. When I changed something and saved again, I had again the troubles. &nbsp; I will recreate the VIs now. I already done, but it didn't helped. Now I read, that old one should be closed. ...

what means that error &quot;the VI is not in memory&quot;?
when i deploy(run) the host program from lvproj, there got the error "the VI is not in memory". what does it mean? thank you for your time i am looking forward your kindly reply .. &nbsp; &nbsp; with regards Did you change the location of your vi? No, i didn't change .. Did u rename it? Hi, roxylat, Its always good idea to post the code snippet where an error occured. Anyway, you may have "the VI not in Memory" error if you will try to open VI reference by name. <a href="http://zone.ni.com/reference/en-XX/help/371361D-01/glang/open_vi_reference/" target="_blank">Help says</a> "...If you wire a name string, the string must match the full delimited name of a VI in memory..." Compare following constructions (assumed that SubVI.vi located in the same directory as caller, and not&nbsp;in the library): <img src="http://vi-lib.com/forForum/openref.PNG"> Andrey. &nbsp;Message Edited by Andrey Dmitriev on 07-04-2008 11:11 AM ...

Error:&quot;Memory.cpp&quot; line 342
Hi All, &nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; I am working in LabVIEW 8.20. In my application, i am inserting a re entrant vi (hosting a xcontrol) in&nbsp;a sub panel placed on the Configure VI of a TEST Express.&nbsp;I am opening and closing the VI refnums properly. while opening the test express by double clicking i am getting the error &nbsp; Fattal Error:"Memory.cpp" line 342 &nbsp; and it closes the labVIEW also. What is the reason and What are the things i need to check to debug this. &nbsp; &nbsp; Regards, Pandiarajan R &nbsp; &nbsp; &nbsp; ...

Adding an &quot;IMAQ Image.ctl&quot; to the &quot;Display State.ctl&quot; of an XControl prevents LabVIEW from creating a probe of &quot;Display State.ctl&quot;
I am working on an extended IMAQ Display control using LabVIEWs XControl capabilities. &nbsp; I need a copy of the original image passed to add some overlays which must not affect the original image. To achieve this I am creating a backup image in the "Init.vi" and deleting it in the "Uninit.vi". I am storing the reference&nbsp;of this image&nbsp;in the "Display State.ctl" which is part of every XControl. &nbsp; As soon as I am adding an "IMAQ Image.ctl" to the Display State cluster, it is no longer possible to generate a probe of the Display State cluster for debugging purposses. I am always getting the message: "Failed to load or create probe." Deleting the "IMAQ Image.ctl" from the cluster makes the probe working again. &nbsp; Is it a bug or am I doing something wrong? &nbsp; I am working with LabVIEW 8.5 and Vision 8.5. &nbsp; Regards &nbsp; Ingo Bartsch Hello Mr. Bartsch, is it possible for you to post a small example to reproduce the behaviour? It would be helpful to get a description in which way you use the typedef files. I found a example/knowledge base where some informations were included to XControl and LV but not with Vision. <a href="http://digital.ni.com/public.nsf/allkb/1DC1ADD2A136DA298625712C00635758?OpenDocument" target="_blank">http://digital.ni.com/public.nsf/allkb/1DC1ADD2A136DA298625712C00635758?OpenDocument</a> Best wishes Ja...

activex error Error -2147417851 &quot;server threw an exception&quot;
Hello everyone.. I am stuck in an activex - excel issue and i need help. I have already tried most of the tips provided in the forum but still no luck.The problem is this: I have the attached vi, slightly modified, and it creates an excel, renames the sheet, on the next iteration it opens the previously created xls and adds another sheet and renames it. I get this error "Error -2147417851 occurred at The server threw an exception." but not always. Sometimes when i delete the file created to run the vi again, it works fine, on my second attempt i get the error again. Weird thing is that when i use the "highlight execution" debugger the problem disappears. I upgraded excel 2000 with SP3, i tried to insert a delay using Flat Sequence Structure but no luck. I tried the MS office homepage but nothing. If anyone can think of something to help please, please let me know.Labview 7.1, MS Excel 2000 SP3.Thanx in advance for your time guys..Yiannis not-ok.vi: http://forums.ni.com/attachments/ni/170/327397/1/not-ok.vi tough one eh?? &nbsp; &nbsp; &nbsp; The error comes from LabVIEW using many threads for the activeX objects; and setting it to run in the user-interface thread means that it will only use one thread to manage its activeX objects. Have you looked at this thread? <a href="http://forums.ni.com/ni/board/message?board.id=170&amp;message.id=302498" target="_blank">http://forums.ni.com/ni/board/message?board.id=170&...

Error 1047 in LabVIEW 8.2: LabVIEW failed to send variable to the script server. Server:&quot;&quot;
I am working with the evaluation version of labVIEW as well and I have run into another error.&nbsp; I am using a MATLAB script node within a for loop and attempting to pass the for loop counter variable into the script.&nbsp; When I run the code it brings up a 1047 error and says "LabVIEW failed to send variable to the script server. Server:"" ".&nbsp; I looked up the error online which seems to have roots in a failed auto initialization of MATLAB.&nbsp; Is there something that I can do in labVIEW to fix the problem or is it strictly a MATLAB error? &nbsp; I really appreciate your help. Hi Patsenat, &nbsp; &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; We have a knowledgebase document on our system referring to this issue.&nbsp; Try reading through <a href="http://digital.ni.com/public.nsf/allkb/2B3FF46C8512C4F786256CF30071BE53?OpenDocument" target="_blank">this</a> and attempting what it says.&nbsp; If you still have problems, please post again. ...

&quot;re-entrant&quot; &quot;file I/O&quot; &quot;QSM_State Machines&quot;
&nbsp; &nbsp; I have trouble with writing (appending) to text file in a QSM that is in an "occurence mode" of operation whereby the queue waits for outside engueue to go ahead and do a task. The task is simply to write to a file a line of text. &nbsp; Outside producers give the queue its go ahead and data is sent along etc... &nbsp; WHat I am seeing in the logging functions are multiple errors (Error 1) Somehow Labview&nbsp;is not noticing that the reference is valid or it is invalidating the reference. &nbsp; Q is Should I just let the QSM loop to keep it alive and would that work? &nbsp; What is the rule concerning queue waiting for an event? Does the VI get flagged as idle and is that why the ref appears to be dropped?&nbsp; THere is no reason I can think of for the ref to be dropped. It is opened in the init frame then kept in a shift register. and available at each iteration in the QSM. &nbsp; The example works in a simple loop but not a loop that is waiting on an occurence.&nbsp; Why? &nbsp; The only work around I can manage is to use the path and open the reference when it is not valid which feels kind of&nbsp; silly if you get my drift &nbsp; Anyone seen this before? &nbsp; Thank You &nbsp; &nbsp; &nbsp; ...

Error code 1025, &quot;Application Reference is invalid.&quot;
My project starts the building process OK but stops at a global variable vi (Data initialization.vi) informing the following error: &nbsp; "Error 1025 occurred at D:\DOC\Laborat�rios\Controlador Pneum�tico\Data initialization.vi &nbsp; Possible reason(s): LabVIEW:&nbsp; Application Reference is invalid." &nbsp; Does anybody have an idea about what is happening? &nbsp; Thanks in advance, Tito. Hi, &nbsp; i have the same problem, if i use global variables in my project and try to build the application. At this time, i didn't find anything to solve the problem. ...

Error -50150 &quot;Cascade Failure&quot;: LabVIEW Bug?
Hello, &nbsp; I'm new to the forums here, so I apologize in advance for breaches of etiquette or various other newbie actions. ;) &nbsp; While using the DAQmx Create Channel VI in conjuction with my own custom unit scale, I keep running into a -50150 error for various combinations of slope and y-intercept. I've pared my problem down to the attached VI. As you can see, I'm setting up the linear scale with a slope and y-intercept, and then scaling the original +/- 10V range for&nbsp;an appropriate&nbsp;maximum and minimum. Upon running this VI as-is, I get the -50150 "cascade failure" error. However, changing the y-intercept value to an arbitrarily different value, say 6, causes the program to run fine. &nbsp; I've noticed that other combinations of slope-intercept also crash the program, and that these combinations usually have a pattern. For example, the (m, b) combinations of &nbsp; (100,5); (100,20); (100,30); (100,45); (100,55); (100,70); and so on, with the 10-15-10-15 pattern repeating &nbsp; cause the program to throw -50150 as well. I have not found any values of the y-intercept that cause the program to crash that are not&nbsp;multiples of 5 (although obviously I cannot say conclusively that there are none). I realize that it is all very well for me to claim that this is a software bug and not my fault, but I cannot see any good reason for this to be happening in such an odd way. &nbsp; I am running LabVIEW...

The instruction at &quot;0x%081x&quot; referenced memory error
I loaded the 2 Device drivers and data acquisition CD's onto a computer. Then they were inadvertantly removed, via the control panel, remove programs. &nbsp; Upon re-installation, the following pop up window said "The instruction at "0x%081x" referenced memory at "0x%081x". The memory could not be "%s" &nbsp; After clicking OK the next window said "Setup.exe has generated errors and will be closed. You will need to restart the program. An error log has been created." &nbsp; Is there something in the registry that may be fouled up? &nbsp; Thanks in advance, &nbsp; Bill I met the same problem.... How did you solve it? Thanks in advance! &nbsp; Roger &nbsp; ...

error #3 : &quot;memory ccp&quot;, line 513
Hi there, &nbsp; I am using&nbsp;an application for monitoring windturbines which is running on the labview runtime engine 6.0.2 with Windows XP. When transferring and merging data (FTP) the following&nbsp;window appears: &nbsp;error #3 : "memory.ccp", line 513. Labview version 6.0.2. For assistance...........etc. I have installed labview runtime engine 8.0 but the application does not start because it requires labview 6.0.2. Unfortunately the company who designed the application is no longer active so I don't know what to do. &nbsp; &nbsp; tups wrote: Hi there, &nbsp; I am using&nbsp;an application for monitoring windturbines which is running on the labview runtime engine 6.0.2 with Windows XP. When transferring and merging data (FTP) the following&nbsp;window appears: &nbsp;error #3 : "memory.ccp", line 513. Labview version 6.0.2. For assistance...........etc. I have installed labview runtime engine 8.0 but the application does not start because it requires labview 6.0.2. Unfortunately the company who designed the application is no longer active so I don't know what to do. Do you have the LabVIEW source code for this application? If you have upgrading it to a newer version might already help but at least give you more possiblities to debug in the development environment. You could do that yourself or hire a LabVIEW specialist to do that. If you don't have the source I'm afraid there is little any...

LV8,5 Dev Suite install, error &quot;Measurement Studio for VS2003 not installed&quot;&quot;
Hi guys, &nbsp; Installing LabVIEW 8.5 Developers suite, installed LV8,5 OK, but all otehr products (CVI, Studio, etc) come up with error messages as per attached photo, "measurement Studio for VSXXXX not installed" &nbsp; When should I have installed this ? which DVD has this ? &nbsp; Any help apreciated &nbsp; Cheers &nbsp; Mathew LV8.5Install.GIF: http://forums.ni.com/attachments/ni/170/272665/1/LV8.5Install.GIF Thanks for the replys. The thing is,I have brought the Developers Suite www.ni.com/suite/ ($7070 NZD),which includes the CVI toolkit&nbsp; and a whole lot of other stuff, surely the required 3rd party software required should be included in the package ? Will give the install anther go, using default settings and see what happens Message Edited by Matwelli on 09-18-2007 11:58 PM ...

plug-in &quot;not installed&quot; in my LabVIEW project's &quot;Build Specifications&quot;
I moved my LabVIEW project from one computer to another, now when I click on any item under the project's "Build Specifications", I get an error reading "The plug-in for the selected item is not installed on your system." Does anybody know how to fix this? I have no idea what this "plug-in" is.Attached is a screenshot. plug-in error.PNG: http://forums.ni.com/attachments/ni/170/222664/1/plug-in error.PNG ...

Web resources about - What causes inconsistent error: Error loading &quot;mydll.dll&quot; Invalid access to memory location. - comp.lang.labview

Resources last updated: 3/19/2016 3:29:20 PM