f



php 5.1.4, apache 2.2.3, and libxslt

I'm having a baffling problem. I've got Apache 2.2.3 and php
5.1.4 installed on a Windows 2000 Pro machine. I've enabled the
libxslt extension by uncommenting the line
"extension=php_xsl.dll" in php.ini, and my extension_dir is
properly pointing to "c:\php\ext". OK, it worked for a while.

The problem is the libxslt functions aren't working now, and when
I run php_info() it doesn't show any xslt library. I swear it did
just last week.

I've been going crazy trying to figure out what changed, and what
I need to do to get my xslt functions working again.
-- 
Roger

-- 
Posted via a free Usenet account from http://www.teranews.com

0
8/25/2006 6:09:05 AM
comp.lang.php 32646 articles. 0 followers. Post Follow

0 Replies
884 Views

Similar Articles

[PageSpeed] 23

Reply:

Similar Artilces:

PHPBB2, PHP 4.3.4, MySQL 4.1.1, Apache 2.0.49, Fedora 2
My combination is: PHPBB2, PHP 4.3.4, MySQL 4.1.1, Apache 2.0.49, Fedora 2 Anyone out there has a successful combination of newer versions ? fr gr Erik ...

Apache 2.2.2 and PHP 5.1.4 on Win2k crashing
I just installed Apache 2.2.2 on my Windows 2000 (SP4) machine to test the new version. Everything works except PHP (version 5.1.4): when starting Apache, it pops out a message saying that it is unable to locate the module (even set on the correct path!), stops the execution and exits. On the other side, PHP works fine with Apache 2.0.55, so It's not a problem of a broken build. Got ideas? Thanks. -- Massimo Lombardo unwiredbrain@gmail.com wrote: > I just installed Apache 2.2.2 on my Windows 2000 (SP4) machine to test > the new version. > Everything works except PHP (version ...

Apache 2.2.3 PHP 4.4.5 Install Fails
Sigh. I have Apache 2.2.3 installed and running on WinXP Pro SP2. I installed PHP 4.4.5 and added the following lines in httpd.conf PHPIniDir C:/PHP445/ LoadModule php4_module C:/PHP445/php4apache2.dll When I restarted Apache, i got this error: The Apache service reported the following error: >>> httpd.exe: Syntax error on line 488 of C:/Program Files/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load C:/PHP445/php4apache2.dll into server: The specified module could not be found. Turns out that php4apache2.dll requires libapr.dll, libaprutil.dll and libapriconv.dll to load. These are Apache dlls and are supposed to be present in Apache2.2\bin folder. I did not find these dlls here. I re-installed Apache 2.2.3 but the above mentioned libapr* dlls did not get installed. What else can I try? Interestingly, php5apache2_2.dll from PHP 5.2 is not dependent on above mentioned libapr* dlls and PHP 5.2 loads correctly. I must use PHP 4.* however. Thanks ...

Apache 2.2.4 ignores PHP 5.2.4 scripts on Win2K3
Hi all PHP newbie here, 1) I disabled IIS. 2) Loaded Apache 2.2.4 on Win2K3. 3) Loaded PHP 5.2.4 pretty much bare bones, but included MySQL, SMTP, SOAP and ZIP extensions. Installers: apache_2.2.4-win32-x86-openssl-0.9.8d.msi php-5.2.4-win32-installer.msi Installer changed the httpd.conf file and added the following: PHPIniDir "C:/Program Files/PHP/" LoadModule php5_module "C:/Program Files/PHP/php5apache2_2.dll" AddType application/x-httpd-php .php Error log shows that PHP was configured: .... [Fri Sep 14 16:07:49 2007] [notice] Apache/2.2.4 (Win32) PHP/5.2.4 configured -- resuming normal operations [Fri Sep 14 16:07:49 2007] [notice] Server built: Jan 9 2007 23:17:20 .... If I add any PHP code to the index.html file it is ignored: <?php print "My Test"; ?> or <?php phpinfo(); ?> Any ideas? -- thanks, bill "AlterEgo" <someone@dslextreme.com> wrote in message news:13em57122h92h15@corp.supernews.com... > Hi all PHP newbie here, > > 1) I disabled IIS. > 2) Loaded Apache 2.2.4 on Win2K3. > 3) Loaded PHP 5.2.4 pretty much bare bones, but included MySQL, SMTP, SOAP > and ZIP extensions. > > Installers: > apache_2.2.4-win32-x86-openssl-0.9.8d.msi > php-5.2.4-win32-installer.msi > > Installer changed the httpd.conf file and added the following: > PHPIniDir "C:/Program Files/PHP/" > LoadModule php5_module "C:/Program Files/PHP/php5apache2_2.dll" &g...

Printing 2^1, 2^2, 2^3, 2^4 and 2^5
Hi, When I use a while loop, the output is: 2 4 8 16 32, as desired: <?php $c=1; while($c<=5) { $d = newpow(2, $c); print "$d "; $c++; } function newpow($base, $power) { // statements... } ?> The But when I use a for loop, the output is: 64: <?php for($c=1; $c<=5; $c++); { $d = newpow(2, $c); print "$d "; } function newpow($base, $power) { // statements... } ?> Why is this?? Many thanks, Michael mejpark wrote: > When I use a while loop, the output is: 2 4 8 16 32, as desired: [...] > The But when I use a for loop, the output is: 64: > > <?php > > for($c=1; $c<=5; $c++); Here your loop ended right at the ; After the loop comes this: > { > $d = newpow(2, $c); > print "$d "; > } Heiko -- http://portal.richler.de/ Namensportal zu Richler http://www.richler.de/ Heiko Richler: Computer - Know How! http://www.richler.info/ private Homepage On 18 Mar, 11:02, Heiko Richler <heiko-rich...@nefkom.net> wrote: > mejpark wrote: > > When I use a while loop, the output is: 2 4 8 16 32, as desired: > [...] > > The But when I use a for loop, the output is: 64: > > > <?php > > > for($c=1; $c<=5; $c++); > > Here your loop ended right at the ; > > After the loop comes this: > > > { > > $d = newpow(2, $c); > > print "$d "; > > } > > Heiko > > --http://portal.richler.d...

Newbie question; why (cons (list 1 2) (list 3 4)) is ((1 2) 3 4) and not ((1 2) (3 4))
Hi, I just started to learn LISP, and stumbled in SICP upon (cons (list 1 2) (list 3 4)) is evaluated to ((1 2) 3 4) I do not understand why this is not: ((1 2) (3 4)) because (cdr (cons (list 1 2) (list 3 4))) is (3 4) and (car (cons (list 1 2) (list 3 4))) is (1 2) Is there a logical explanation? Thank you for your patience. -- Greg Out of order, gregor <gregor@ediwo.com> writes: > Is there a logical explanation? Yes. > I just started to learn LISP, and stumbled in SICP upon But first, let's talk about LISP, Lisp, Scheme and Common Lisp. LISP is the name of the programming language invented in 1959 by John McCarthy and of the first program implementing it written amongst other by Steve Russel, one of his students. LISP 1.5 is a segueing version of that same program dating about 1962 that had some distribution. Then various lisp languages were developed at various places by various teams. Names such as MacLisp, InterLisp, LeLisp, StandardLisp, vLisp, Lisp Machine Lisp, Scheme, GNU Emacs Lisp, etc. It was quite a mess, and people had a hard time sharing programs. So they talked and designed and wrote and voted and produced the ANSI Common Lisp standard (in the USA), meanwhile in Europe they produced the ISO Lisp standard. Nowadays, almost all the other lisps are "dead", with only scheme (current version r5rs, r7r...

convert String "1;2;3;4;5;" to Array [1, 2, 3, 4, 5]
I'm trying to convert a String of numbers that are separated by semicolons to an Array---totally for fun, to stretch my ruby understanding, fyi. I use the Array in a while loop which does work when the Array looks like = [1,2,3,4,5,...]---so that part is working. But I want to use ruby to convert a String = "1;2;3;4;5;6;7;8;9;10" into an Array [1,2,3,4,5,...] so that I can use these values. I've tried many a method, but can't seem to get the desired result; I've tried gsub(/\;/, ","), eval (), and others. ########## raw_data = "1;2;3...

PHP 5.x and Wordpress 1.5.2 and Apache 1.3.x
Folks, I'm using WP 1.5.2 on Apache 1.3.33 and tried it with both PHP 5.0.4 and php 5.1.0.rc.1 -- and getting seg faults (can't even complete setup) I complete the first step in Setup, and get the seg fault going to the second step. I would welcome any work arounds/solutions people might have. I checked our the wordpress site, http://www.wordpress.org/, but seeing mixed messages. Some folks say the seg fault is there, others say it works with Apache 2.0? Many thanks. -- John ________________________________________________________________...

Apache 2.0.50 php 4.3.8 Aix 5.2
I have apache 2 already installed and working. aixstar root /usr/httpd/bin > ./httpd -l Compiled in modules: core.c mod_access.c mod_auth.c mod_include.c mod_log_config.c mod_env.c mod_setenvif.c prefork.c http_core.c mod_mime.c mod_status.c mod_autoindex.c mod_asis.c mod_cgi.c mod_negotiation.c mod_dir.c mod_imap.c mod_actions.c mod_userdir.c mod_alias.c mod_so.c ../configure --with-apxs2=/usr/httpd/bin/apxs --with-oci8=/ora01/app/oracle/product/9.2.0.1.0 --enable-ftp --enable-sigchild --disable-libxml Works fine, without displaying any errors. m...

Help Needed: Upgrade Fedora 4 / Apache 2 to PHP 5.2.x from 5.0.4
Help Needed: Upgrade Fedora 4 / Apache 2 to PHP 5.2.x from 5.0.4 I've been testing Joomla as a content manager for the County offices, and it looks pretty good. Unfortunately, I decided to upgrade it from the 1.0.13 version to 1.5 as we get ready to go live with the web site... and the update installation gives an error in XML processing, which seems (from what I've been able to dredge up in forum discussions) to stem from a known bug in PHP 5.0.4... I've seen this same error from a couple of other programs that want to upload XML data to PHP based server software, too, so I'm inclined to believe the problem is on the server side and that it has at least something to do with PHP, i.e. either a bug or at least a setup/config problem... So I decided to upgrade the PHP from 5.0.4 to 5.2.4, but I couldn't find a binary set for Fedora 4, so it has to be compiled.... and I can't get it to install. Actually, that's not quite true - I did get it to install with the base config, but that didn't include some needed stuff (e.g. mysqli), and when I took the config parameters from the 5.0.4 version (from the output of aboutphp.php) and tried those with the config build, it complained about not finding apxs. I don't find apxs anywhere on the system, so I'm stuck there (as far as building the PHP 5.2.4). The install docs from php.net call for you to build Apache from source, which I gather will create apxs as part of the build, but - having now...

php degugger on php 5.2.2 (xampp 1.6.2) real brainer
Hi, I tried to get php dbg debugger working on my machine but it doesn't work at all. Ok, what i did: copied php_dbg-5.2.x.dll (for PHP 5.2.x version) into my xampp/php/ext directory next, modified /xampp/apache/bin/php.ini file appending: [debugger] extension=php_dbg-5.2.x.dll debugger.enabled=on debugger.profiler_enabled=on debugger.hosts_allow=localhost 127.0.0.1 ;debugger.hosts_deny=ALL debugger.ports=7869, 10000/16 debugger.JIT_host = clienthost debugger.JIT_port = 7869 Now, when i restard my server and try to get http://localhost my apache crashes and windows gives me a window telling me that this application will be closed !@!! what is wrong ? im running windows xp sp2 thanks in advance Piotr Nowak pisze: > Hi, > > I tried to get php dbg debugger working on my machine but it doesn't > work at all. > > Ok, what i did: > > copied php_dbg-5.2.x.dll (for PHP 5.2.x version) into my xampp/php/ext > directory > next, modified /xampp/apache/bin/php.ini file appending: > > [debugger] > extension=php_dbg-5.2.x.dll > debugger.enabled=on > debugger.profiler_enabled=on > debugger.hosts_allow=localhost 127.0.0.1 > ;debugger.hosts_deny=ALL > debugger.ports=7869, 10000/16 > debugger.JIT_host = clienthost > debugger.JIT_port = 7869 > > > Now, when i restard my server and try to get http://localhost my apache > crashes and windows gives me a window telling me that this application >...

freebsd-5.2.1+ php-4.3.9 + gd-2.0.33
Hello there, I am tryin to compile PHP with GD support under FreeBSD-5.2.1: # cd php-4.3.11 # ./configure \ --with-gd=/usr/local/src/gd-2.0.33/ \ --with-png-dir=/usr/local/src/libpng-1.2.8/ \ --with-zlib-dir=/usr/local/src/zlib/ \ --with-jpeg-dir=/usr/local/src/jpeg-6b/ .... checking for GD support... yes checking for the location of libpng... /usr/local/src/libpng-1.2.8/ If configure fails try --with-jpeg-dir=<DIR> configure: error: libpng.(a|so) not found. why libpng.(a|so) not found ? # ls -l /usr/local/src/libpng-1.2.8/libpng.a -rw-r--r-- 1 root wheel 160448 May 31 12:48 /usr/local/src/libpng-1.2.8/libpng.a What is my mistake? Where to read about correct way to install php + gd + libjpeg + libpng ? Encapsulin wrote: > Hello there, > I am tryin to compile PHP with GD support under FreeBSD-5.2.1: > > # cd php-4.3.11 > # ./configure \ > --with-gd=/usr/local/src/gd-2.0.33/ \ > --with-png-dir=/usr/local/src/libpng-1.2.8/ \ > --with-zlib-dir=/usr/local/src/zlib/ \ > --with-jpeg-dir=/usr/local/src/jpeg-6b/ > > ... > checking for GD support... yes > checking for the location of libpng... /usr/local/src/libpng-1.2.8/ > If configure fails try --with-jpeg-dir=<DIR> > configure: error: libpng.(a|so) not found. > > why libpng.(a|so) not found ? > > # ls -l /usr/local/src/libpng-1.2.8/libpng.a > -rw-r--r-- 1 root wheel 160448 May 31 12:48 > /usr/loca...

Install of APACHE 2.5.9 and PHP 5.2.3
Hello, I install the apache server in my Red Hat Linux with ssl support (using openssl 0.9.8) In this step my Apache server started without any problem After this i install php 5.2.3 and i Had this : /etc/init.d/httpd start Syntax error on line 37 of /usr/lib/httpd/modules/httpd.conf: Cannot load /php/libphp5.so into server: /php/libphp5.so: undefined symbol: EVP_CIPHER_CTX_block_size A problem occured, preventing Apache to start Please any one can help me thank's On 12 Jun, 16:06, baroudi <baroudi.abdelmou...@gmail.com> wrote: > > /etc/init.d/http...

Apache 2.0.48+php 4.3.4+Aix 4.3.3
Hello. I'm trying to compile this version of apache with php support on Aix 4.3.3ML11. I use gcc 3.2.1 compiler and all seems to go right. But when i try to access to a php page apache shows segmentation fault and doesn't answer. Any idea ? Thanks. > Hello. > I'm trying to compile this version of apache with php support on Aix > 4.3.3ML11. > I use gcc 3.2.1 compiler and all seems to go right. > But when i try to access to a php page apache shows segmentation fault and > doesn't answer. > > Any idea ? Does Apache also segfaults wh...

<?= does not work on Windows XP Apache 2.2.x and PHP 5.2.4
When i do <?php echo "This works fine"; ?> Everything works fine. But when i do <?= "Some text"?> nothing works. Any ideas? Best Regards, Nicos On Fri, 28 Sep 2007 10:06:26 +0200, Nicos <nicoskk@gmail.com> wrote: > When i do > <?php > echo "This works fine"; > ?> > Everything works fine. But when i do > <?=3D "Some text"?> nothing works. Any ideas? It relies on short_open_tags, which have been disabled by default for a = = very long time now. Don't rely on them, only keep the setting on for = legacy code that still uses it for which you have no time to rewrite it,= = and use full tags in new code. -- = Rik Wasmus ...

Does 4/2/2= (4/2)/2 =1 OR = 4/(2/2)=4
I don't have matlab and I am trying to translate some simple matlab code. Does 4/2/2 = (4/2)/2 = 1 or 4/2/2 = 4/(2/2) = 4 On 9/11/2012 9:43 AM, sarah.englander@gmail.com wrote: > I don't have matlab and I am trying to translate some simple matlab code. > > Does 4/2/2 = (4/2)/2 = 1 yes. At a given precedence level (and obviously two of the same operators are the same level) evaluation proceeds from LtoR. ....snip... <http://www.mathworks.com/help/techdoc/matlab_prog/f0-40063.html#f0-38155> -- dpb <none@non.net> wrote in message <k2njh1$jes$1@speranza.aioe.org>... > On 9/11/2012 9:43 AM, sarah.englander@gmail.com wrote: > > I don't have matlab and I am trying to translate some simple matlab code. > > > > Does 4/2/2 = (4/2)/2 = 1 > > yes. At a given precedence level (and obviously two of the same > operators are the same level) evaluation proceeds from LtoR. > > ...snip... > > <http://www.mathworks.com/help/techdoc/matlab_prog/f0-40063.html#f0-38155> > > -- There are a few thing you need to understand: 1. You need to get matlab in order to translate the simple code 2. You should define your parameters as in what is the expected output of your search based on the equations used: Is it : a) 4/2/2 b) (4/2/2) On 9/11/2012 11:13 PM, Salvinder wrote: .. > There are a few thing you need to understand: > 1. ...

How to integrate gcc 3.4.4 to Tornado 2.2.1 for VxWorks 5.5.1
Hi, all. Did anybody tried to integrate the gcc 3.4.4 to Tornado 2.2.1, whose native compiler is gcc 2.96 ? I know that the gcc 3.4.4 is delivered as part of Workbench IDE with VxWorks 6.x and generally it is supported by WindRiver. If you tried and, hopefully, succeeded to integrate the compiler, please outline the procedure or, alternatively, point me to a resource explaining this issue. If you tried and not succeeded, please give me an indication - whether, in your opinion, it is possible at all. We have an application written under VxWorks 5.5.1 with Tornado 2.2.1 and now we trying to e...

[1 1 1 1 1 ;2 2 2 2 2 ;3 3 3 3 3 3;....;n n n n n]
Hi, Anybody knows how to create this matrix but without using any loops? a=[1 1 1 1 1 ;2 2 2 2 2 ;3 3 3 3 3 ;.......;n n n n n ] Thank you. Hana. Hana wrote: > Hi, > Anybody knows how to create this matrix but without using any loops? > a=[1 1 1 1 1 ;2 2 2 2 2 ;3 3 3 3 3 ;.......;n n n n n ] HELP REPMAT - Randy Hana wrote: > > > Hi, > Anybody knows how to create this matrix but without using any > loops? > a=[1 1 1 1 1 ;2 2 2 2 2 ;3 3 3 3 3 ;.......;n n n n n ] > > Thank you. > Hana. Hope this isn't homework. >> repmat([1:n]'...

ANN: ActivePython 2.6.2.2, 3.1.0b1.0, 2.5.4.4 is now available
I'm happy to announce that ActivePython 2.6.2.2, 3.1.0b1.0 and 2.5.4.4 are now available for download from: http://www.activestate.com/activepython/ This is a patch release that updates ActivePython to core Python 2.6.2 and 3.1b2. This release also contains updates to Tcl/Tk 8.5.7 and Tix 8.4.3. We recommend that you try 2.6 version first. See the release notes for full details: http://docs.activestate.com/activepython/2.6/relnotes.html What is ActivePython? --------------------- ActivePython is ActiveState's binary distribution of Python. Builds for Windows, Mac OS X,...

apache 2.2.15 service won't start w/ PHP 5.3.2, Windows XP
On a localhost development configuration under Windows XP Pro (SP3), I cannot get Apache2.2.15 http service to start after I enable PHP 5.3.2 as a module. Without PHP, Apache starts and works just fine; PHP itself works (from a command prompt). I had had Apache 2.2.14 and an older PHP 5.2.x working happily together, supporting MySQL, phpMyAdmin, etc. I uninstalled all that and instead: (1) Installed Apache 2.2.15 from httpd-2.2.15-win32-x86-no_ssl.msi (also tried the openssl version when the former + PHP didn't work). It's installed as a service for all users on port 80. And I'm running as Administrator. That worked just fine. (2) Installed PHP 5.3.2 from php-5.3.2-Win32-VC6-x86.msi (thread safe version). As php.net says, with apache.org binaries, I used the VC6 version, not VC9. Now the apache http service will not start. So of course I never got so far as to try a .php script in the browser. When that failed, I uninstalled PHP and instead tried to use php-5.3.2- Win32-VC6-x86.zip and configure manually, starting with php.ini- development copied to php.ini and edited as below. Of course I put the correct entries in Windows system environment variables PATH (starts with D:\Server\PHP\ext;D:\Server\PHP) and PHPRC (D:\Server\PHP). File httpd.conf is what the Apache installer set up plus my edits in appropriate spots: [CODE]ServerName localhost:80 DocumentRoot "E:/htdocs" <Directory "E:/htdocs"> LoadModule php5_module "D:/Serv...

PHP 5.2.1: cli does load php_mysql.dll while the same script executed by apache 2.2 fails Call to undefined function mysql_connect()
Hi there! After I overcame some short_open_tag (thanks, Rik!) I encounter another strange php-behaviour. The script I just got to work on the windows-commandline obviously does as php.ini tells php to do and loads php_mysql.dll: E:\ersDHCP>php ./extractLog.php .... some mysql-stuff, some output, OK The same script invoked by the webserver apache 2.2 entails an error: http://localhost/extractLog.php PHP Fatal error: Call to undefined function mysql_connect() My configuration php.ini does contain the line extension=php_mysql.dll and seems to be OK while I use the script from commandline. Is there anybody who can give me a hint where to cope with this error? Take care, Christian ...

want to run PHP 5 on Apache 2, not easy to do
I have tried to install mod_PHP5 on freebsd where I had installed apache 2. It throws as error indicating mod_php5 needs apache 1.3. I am a newbie, shoudl I just run Apache 1.3 rather than trying to run the latest Apache? NotGiven wrote: > I have tried to install mod_PHP5 on freebsd where I had installed apache > 2. It throws as error indicating mod_php5 needs apache 1.3. > > I am a newbie, shoudl I just run Apache 1.3 rather than trying to run the > latest Apache? No. How did you install PHP? Presumably not from source. Try installing from source, or if you want a bi...

Why The Script Ran on PHP 4.2.3, but not 4.2.4
What is the big change from 4.2.4 from 4.2.3? I have many scripts not runing now. The scripts are working fine in PHP 3.x While, it should be 4.2.3 and 4.3.4 Why scripts running fine in 4.2.3 do not run in 4.3.4? > What is the big change from 4.2.4 from 4.2.3? I have many scripts not runing > now. The scripts are working fine in PHP 3.x > > On Sat, 10 Apr 2004 03:28:38 +0000, Finding Best Hosting wrote: > What is the big change from 4.2.4 from 4.2.3? I have many scripts not > runing now. The scripts are working fine in PHP 3.x 4.2.3 - Working ??? 4.2.4 - Not working...

Trouble installing PHP 5.3 on WinXP, Apache 2.2
Hi, I'm trying to install PHP 5.3 on Apache 2.2, WinXP. I've added this line to my httpd.conf file LoadModule php5_module "C:/PHP/php5apache2_2.dll" but when I start Apache using "httpd -k start", I'm getting this error ... C:\Program Files\Apache Software Foundation\Apache2.2\bin>httpd -k start httpd: Syntax error on line 503 of C:/Program Files/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load C:/PHP/ php5apache2_2.dll into server: The specified module could not be found. I have verified that the file exists. Can anyon...

Web resources about - php 5.1.4, apache 2.2.3, and libxslt - comp.lang.php

libxslt - Wikipedia, the free encyclopedia
Unix-like , Windows, CygWin, Mac OS, RISC OS, OS/2, VMS, QNX, MVS... libxslt is the XSLT C library developed for the GNOME project. It provides ...

Tomsondev Blog - My Company
BestSolution.at EDV Systemhaus GmbH BestSolution was founded in 2002 by three partners and comprises today different projects for wellknown business-partners ...

iPhone 4S iOS 9.2 vs iOS 9.2.1 Build 13D15 Speed Comparison - YouTube
The final release of iOS 9.2.1 was released today January 19th 2016. It comes with the build # 13D15 and includes several bug fixes. See below. ...

Python Package Manager Index (PyPM) - ActiveState Code
Python Package Manager (PyPM) for searching python modules such as NumPy, SciPy, matplotlib, mysql-python, psycopg2, cx_Oracle, pyodbc, pymssql, ...

APPLE-SA-2011-06-23-1 Mac OS X v10.6.8 and Security Update 2011-004
-BEGIN PGP SIGNED MESSAGE-Hash: SHA1Mac OS X v10.6.8 and Security Update 2011-004 are now available andaddress the following:AirPortAvailable ...

Source Browser
Source Browser Name Size Parent Directory - Apple16X50Serial/ - Apple3Com3C90x/ - AppleAC97Audio/ - AppleADBButtons/ - AppleADBDisplay/ - AppleADBKeyboard/ ...

About Security Update 2008-007
This document describes Security Update 2008-007, which can be downloaded and installed via Software Update preferences, or from Apple Downloads ...

Apple releases Security Update 2008-007 for Mac OS X
Apple on Thursday afternoon released its seventh distinct security fix of the year for Mac OS X to tackle a number flaws, including one introduced ...

Saxonica
At the XML Summer School 2013, Tony Graham presented a lightning talk about life after libxslt 1.0. I was not present for this summer school, ...

Apple updates Safari with 11 security fixes
Update includes both Mac and Windows versions Apple's Web browser.

Resources last updated: 3/23/2016 10:17:51 PM