f



PHP 5.2.1: cli does load php_mysql.dll while the same script executed by apache 2.2 fails Call to undefined function mysql_connect()

Hi there!

After I overcame some short_open_tag (thanks, Rik!) I encounter
another strange php-behaviour. The script I just got to work on the
windows-commandline obviously does as php.ini tells php to do and
loads php_mysql.dll:

E:\ersDHCP>php ./extractLog.php
.... some mysql-stuff, some output, OK

The same script invoked by the webserver apache 2.2 entails an error:

http://localhost/extractLog.php
PHP Fatal error: Call to undefined function mysql_connect()

My configuration php.ini does contain the line extension=php_mysql.dll
and seems to be OK while I use the script from commandline. Is there
anybody who can give me a hint where to cope with this error?

Take care,

Christian

0
java (18)
3/9/2007 4:29:02 PM
comp.lang.php 32646 articles. 0 followers. Post Follow

0 Replies
2991 Views

Similar Articles

[PageSpeed] 20

Reply:

Similar Artilces:

Unable to load dynamic link library php_mysql.dll
Hello, I am attempting to perform a PHP installation on an Apache 2.2.6 web server instance that is loaded on a Windows 2003 server operating system (R2 SP2). I have a third party application that will reside within the Apache instance that requires PHP 5.2.6 loaded with MySql support. The installation of PHP succedded without incident (it was done manually) and I can run phpinfo() to get information about the installation. However, when attempting to load the php_mysql.dll extension I recieve the following error message: ------------- PHP Warning: PHP Startup: Unable to load dynamic library 'C:\\php\\ext\\php_mysql.dll' - The specified module could not be found.\r\n in Unknown on line 0 ------------- I have verified the following: 1. That I have set up the php.ini file (which resides in C:\php. Specifically, I have set up the following as it regards to loading the php_mysql.dll extension - Set up the extension_dir variable: extension_dir = "C:\php\ext\" - Uncommented the line that relates to the php_mysql.dll file" extension=php_mysql.dll 2. That I have set up the http.conf file for Apache: - The following lines were added: LoadModule php5_module "C:/php/php5apache2_2.dll" PHPIniDir "C:/php" AddType application/x-httpd-php .php .php3 .htm .html AddType application/x-httpd-php-source .phps Is there anything else that I need to do? Thanks for yo...

Apache 2.2.2 and PHP 5.1.4 on Win2k crashing
I just installed Apache 2.2.2 on my Windows 2000 (SP4) machine to test the new version. Everything works except PHP (version 5.1.4): when starting Apache, it pops out a message saying that it is unable to locate the module (even set on the correct path!), stops the execution and exits. On the other side, PHP works fine with Apache 2.0.55, so It's not a problem of a broken build. Got ideas? Thanks. -- Massimo Lombardo unwiredbrain@gmail.com wrote: > I just installed Apache 2.2.2 on my Windows 2000 (SP4) machine to test > the new version. > Everything works except PHP (version ...

php degugger on php 5.2.2 (xampp 1.6.2) real brainer
Hi, I tried to get php dbg debugger working on my machine but it doesn't work at all. Ok, what i did: copied php_dbg-5.2.x.dll (for PHP 5.2.x version) into my xampp/php/ext directory next, modified /xampp/apache/bin/php.ini file appending: [debugger] extension=php_dbg-5.2.x.dll debugger.enabled=on debugger.profiler_enabled=on debugger.hosts_allow=localhost 127.0.0.1 ;debugger.hosts_deny=ALL debugger.ports=7869, 10000/16 debugger.JIT_host = clienthost debugger.JIT_port = 7869 Now, when i restard my server and try to get http://localhost my apache crashes and windows gives me a window telling me that this application will be closed !@!! what is wrong ? im running windows xp sp2 thanks in advance Piotr Nowak pisze: > Hi, > > I tried to get php dbg debugger working on my machine but it doesn't > work at all. > > Ok, what i did: > > copied php_dbg-5.2.x.dll (for PHP 5.2.x version) into my xampp/php/ext > directory > next, modified /xampp/apache/bin/php.ini file appending: > > [debugger] > extension=php_dbg-5.2.x.dll > debugger.enabled=on > debugger.profiler_enabled=on > debugger.hosts_allow=localhost 127.0.0.1 > ;debugger.hosts_deny=ALL > debugger.ports=7869, 10000/16 > debugger.JIT_host = clienthost > debugger.JIT_port = 7869 > > > Now, when i restard my server and try to get http://localhost my apache > crashes and windows gives me a window telling me that this application >...

Apache 2.2.4 ignores PHP 5.2.4 scripts on Win2K3
Hi all PHP newbie here, 1) I disabled IIS. 2) Loaded Apache 2.2.4 on Win2K3. 3) Loaded PHP 5.2.4 pretty much bare bones, but included MySQL, SMTP, SOAP and ZIP extensions. Installers: apache_2.2.4-win32-x86-openssl-0.9.8d.msi php-5.2.4-win32-installer.msi Installer changed the httpd.conf file and added the following: PHPIniDir "C:/Program Files/PHP/" LoadModule php5_module "C:/Program Files/PHP/php5apache2_2.dll" AddType application/x-httpd-php .php Error log shows that PHP was configured: .... [Fri Sep 14 16:07:49 2007] [notice] Apache/2.2.4 (Win32) PHP/5.2.4 configured -- resuming normal operations [Fri Sep 14 16:07:49 2007] [notice] Server built: Jan 9 2007 23:17:20 .... If I add any PHP code to the index.html file it is ignored: <?php print "My Test"; ?> or <?php phpinfo(); ?> Any ideas? -- thanks, bill "AlterEgo" <someone@dslextreme.com> wrote in message news:13em57122h92h15@corp.supernews.com... > Hi all PHP newbie here, > > 1) I disabled IIS. > 2) Loaded Apache 2.2.4 on Win2K3. > 3) Loaded PHP 5.2.4 pretty much bare bones, but included MySQL, SMTP, SOAP > and ZIP extensions. > > Installers: > apache_2.2.4-win32-x86-openssl-0.9.8d.msi > php-5.2.4-win32-installer.msi > > Installer changed the httpd.conf file and added the following: > PHPIniDir "C:/Program Files/PHP/" > LoadModule php5_module "C:/Program Files/PHP/php5apache2_2.dll" &g...

Printing 2^1, 2^2, 2^3, 2^4 and 2^5
Hi, When I use a while loop, the output is: 2 4 8 16 32, as desired: <?php $c=1; while($c<=5) { $d = newpow(2, $c); print "$d "; $c++; } function newpow($base, $power) { // statements... } ?> The But when I use a for loop, the output is: 64: <?php for($c=1; $c<=5; $c++); { $d = newpow(2, $c); print "$d "; } function newpow($base, $power) { // statements... } ?> Why is this?? Many thanks, Michael mejpark wrote: > When I use a while loop, the output is: 2 4 8 16 32, as desired: [...] > The But when I use a for loop, the output is: 64: > > <?php > > for($c=1; $c<=5; $c++); Here your loop ended right at the ; After the loop comes this: > { > $d = newpow(2, $c); > print "$d "; > } Heiko -- http://portal.richler.de/ Namensportal zu Richler http://www.richler.de/ Heiko Richler: Computer - Know How! http://www.richler.info/ private Homepage On 18 Mar, 11:02, Heiko Richler <heiko-rich...@nefkom.net> wrote: > mejpark wrote: > > When I use a while loop, the output is: 2 4 8 16 32, as desired: > [...] > > The But when I use a for loop, the output is: 64: > > > <?php > > > for($c=1; $c<=5; $c++); > > Here your loop ended right at the ; > > After the loop comes this: > > > { > > $d = newpow(2, $c); > > print "$d "; > > } > > Heiko > > --http://portal.richler.d...

AIX 5.2/php 5.3.2 'make cli' says it succeeds, but no executable
.... Generating phar.php /bin/sh[14]: /usr/local/SRC/php-5.3.2/sapi/cli/php: not found make: The error code from the last command is 127. # make cli echo '\ \ Target "cli" is up to date. CREDITS config.w32 php_cli_readline.c Makefile.frag php.1 php_cli_readline.h README php.1.in php_cli_readline.lo TODO php_cli.c php_cli_readline.o cli_win32.c php_cli.lo tests config.m4 php_cli.o On Apr 8, 10:50=A0am, tkevans <evanst...@gmail.com> wrot...

Is Php built in function ' imagecreate()' compatible in Php version 5.2.2 ?
Hi All, I have the php version 5.2.2 . When I am using " $im = imagecreate(......); " I am getting the following message "Fatal error: Call to undefined function imagecreate() in C:\Program Files\Apache Software Foundation\Apache2.2\htdocs\server.php on line 32" I want to know whether "imagecreate()" is compatible in PHP version 5.2.2.? saikiran.iitkgp@gmail.com wrote: > Hi All, > > I have the php version 5.2.2 . When I am using > > > " $im = imagecreate(......); " I am getting the following message > > > "Fatal error: Call to undefined function imagecreate() in C:\Program > Files\Apache Software Foundation\Apache2.2\htdocs\server.php on line > 32" > > > I want to know whether "imagecreate()" is compatible in PHP version > 5.2.2.? > It looks like you're missing the gd extension. -- ================== Remove the "x" from my email address Jerry Stuckle JDS Computer Training Corp. jstucklex@attglobal.net ================== edit php.ini ;extension=php_gd2.dll to extension=php_gd2.dll ...

Apache 2.2.3 PHP 4.4.5 Install Fails
Sigh. I have Apache 2.2.3 installed and running on WinXP Pro SP2. I installed PHP 4.4.5 and added the following lines in httpd.conf PHPIniDir C:/PHP445/ LoadModule php4_module C:/PHP445/php4apache2.dll When I restarted Apache, i got this error: The Apache service reported the following error: >>> httpd.exe: Syntax error on line 488 of C:/Program Files/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load C:/PHP445/php4apache2.dll into server: The specified module could not be found. Turns out that php4apache2.dll requires libapr.dll, libaprutil.dll and libapriconv.dll...

Apache/PHP 5.1.2/mod_perl Solaris 10 Problem #2
Hi, After several days of debugging I think I figured out that perl 5.8.3 with a default config doesn't work properly on Solaris 10. I installed on a Solaris 10 (doing a major upgrade from a working Solaris 9 similar setup ) the following: Apache/1.3.34 (Unix) PHP/5.1.2 mod_perl/1.29 using the Solaris malloc (perl 5.8.3 configured with -Uusemyalloc (means: don't use perl's malloc) and the rest default) (All compiled with the Sunfreeware gcc 3.3.2 package and APACI for PHP and mod_perl) RT 3.4.5 with RTFM-2.2.0RC2. >From time to time one of the Apache processes simply bails ...

<?= does not work on Windows XP Apache 2.2.x and PHP 5.2.4
When i do <?php echo "This works fine"; ?> Everything works fine. But when i do <?= "Some text"?> nothing works. Any ideas? Best Regards, Nicos On Fri, 28 Sep 2007 10:06:26 +0200, Nicos <nicoskk@gmail.com> wrote: > When i do > <?php > echo "This works fine"; > ?> > Everything works fine. But when i do > <?=3D "Some text"?> nothing works. Any ideas? It relies on short_open_tags, which have been disabled by default for a = = very long time now. Don't rely on them, only keep the setting on for = legacy code that still uses it for which you have no time to rewrite it,= = and use full tags in new code. -- = Rik Wasmus ...

Install of APACHE 2.5.9 and PHP 5.2.3
Hello, I install the apache server in my Red Hat Linux with ssl support (using openssl 0.9.8) In this step my Apache server started without any problem After this i install php 5.2.3 and i Had this : /etc/init.d/httpd start Syntax error on line 37 of /usr/lib/httpd/modules/httpd.conf: Cannot load /php/libphp5.so into server: /php/libphp5.so: undefined symbol: EVP_CIPHER_CTX_block_size A problem occured, preventing Apache to start Please any one can help me thank's On 12 Jun, 16:06, baroudi <baroudi.abdelmou...@gmail.com> wrote: > > /etc/init.d/http...

Apache 2.2 and PHP
I have upgraded to Apache 2.2 and php5.0.4 (both from SUNFREEWARE) and am now getting errors: httpd: Syntax error on line 110 of /usr/local/apache2/conf/httpd.conf: API module structure `php5_module' in file /usr/local/apache2/modules/libphp5.so is garbled - perhaps this is not an Apache module DSO? This has been reported at various places but there has been NO answer... Any EXPERT know how to resolve? Yes,the libphp5.so exists with the same rights as all the others in the MODULES directory. Thanks Carl On Mon, 13 Feb 2006, Carl Hilton wrote: > I have upgraded to Apache 2.2 and ...

apache 2.2.15 service won't start w/ PHP 5.3.2, Windows XP
On a localhost development configuration under Windows XP Pro (SP3), I cannot get Apache2.2.15 http service to start after I enable PHP 5.3.2 as a module. Without PHP, Apache starts and works just fine; PHP itself works (from a command prompt). I had had Apache 2.2.14 and an older PHP 5.2.x working happily together, supporting MySQL, phpMyAdmin, etc. I uninstalled all that and instead: (1) Installed Apache 2.2.15 from httpd-2.2.15-win32-x86-no_ssl.msi (also tried the openssl version when the former + PHP didn't work). It's installed as a service for all users on port 80. And I'm running as Administrator. That worked just fine. (2) Installed PHP 5.3.2 from php-5.3.2-Win32-VC6-x86.msi (thread safe version). As php.net says, with apache.org binaries, I used the VC6 version, not VC9. Now the apache http service will not start. So of course I never got so far as to try a .php script in the browser. When that failed, I uninstalled PHP and instead tried to use php-5.3.2- Win32-VC6-x86.zip and configure manually, starting with php.ini- development copied to php.ini and edited as below. Of course I put the correct entries in Windows system environment variables PATH (starts with D:\Server\PHP\ext;D:\Server\PHP) and PHPRC (D:\Server\PHP). File httpd.conf is what the Apache installer set up plus my edits in appropriate spots: [CODE]ServerName localhost:80 DocumentRoot "E:/htdocs" <Directory "E:/htdocs"> LoadModule php5_module "D:/Serv...

LaTex equation numbering like 2.1, 2.2, also 2.0.1, 2.0,2, 2.1.1, etc
David Roach wrote: > Is there a simple command to have latex number > the equations by the section numbers automatically. > > David From the LaTeX Companion (what a wonderful book!) %%%%%%%%%%%%%%%%%%%%%% % number equations within sections % In preamble \makeatletter \@addtoreset{equation}{section} \makeatother \renewcommand{\theequation}{\thesection.\arabic{equation}} %%%%%%%%%%%%%%%%%%%%%% Numbers within sections...I use this all the time in articles. Even works with ******************* ******************* Brilliant. And then I got numbering within subsections by repeating and editing (not replacing), so I now have:- (Just after the documentClass command) \makeatletter \@addtoreset{equation}{section} \makeatother \renewcommand{\theequation}{\thesection.\arabic{equation}} \makeatletter \@addtoreset{equation}{subsection} \makeatother \renewcommand{\theequation}{\thesubsection.\arabic{equation}} Bob Bob Marlow schrieb: > David Roach wrote: > >> Is there a simple command to have latex number >> the equations by the section numbers automatically. >> >> David > > From the LaTeX Companion (what a wonderful book!) > > %%%%%%%%%%%%%%%%%%%%%% > > % number equations within sections > % In preamble > > \makeatletter > \@addtoreset{equation}{section} > \makeatother > \renewcommand{\theequation}{\thesection.\arabic{equation}} > > %%%%%%%%%%%%%%%%%%%%%% [more code] > Hi! I th...

Does 4/2/2= (4/2)/2 =1 OR = 4/(2/2)=4
I don't have matlab and I am trying to translate some simple matlab code. Does 4/2/2 = (4/2)/2 = 1 or 4/2/2 = 4/(2/2) = 4 On 9/11/2012 9:43 AM, sarah.englander@gmail.com wrote: > I don't have matlab and I am trying to translate some simple matlab code. > > Does 4/2/2 = (4/2)/2 = 1 yes. At a given precedence level (and obviously two of the same operators are the same level) evaluation proceeds from LtoR. ....snip... <http://www.mathworks.com/help/techdoc/matlab_prog/f0-40063.html#f0-38155> -- dpb <none@non.net> wrote in message <k2njh1$jes$1@speranza.aioe.org>... > On 9/11/2012 9:43 AM, sarah.englander@gmail.com wrote: > > I don't have matlab and I am trying to translate some simple matlab code. > > > > Does 4/2/2 = (4/2)/2 = 1 > > yes. At a given precedence level (and obviously two of the same > operators are the same level) evaluation proceeds from LtoR. > > ...snip... > > <http://www.mathworks.com/help/techdoc/matlab_prog/f0-40063.html#f0-38155> > > -- There are a few thing you need to understand: 1. You need to get matlab in order to translate the simple code 2. You should define your parameters as in what is the expected output of your search based on the equations used: Is it : a) 4/2/2 b) (4/2/2) On 9/11/2012 11:13 PM, Salvinder wrote: .. > There are a few thing you need to understand: > 1. ...

PHP 5.x and Wordpress 1.5.2 and Apache 1.3.x
Folks, I'm using WP 1.5.2 on Apache 1.3.33 and tried it with both PHP 5.0.4 and php 5.1.0.rc.1 -- and getting seg faults (can't even complete setup) I complete the first step in Setup, and get the seg fault going to the second step. I would welcome any work arounds/solutions people might have. I checked our the wordpress site, http://www.wordpress.org/, but seeing mixed messages. Some folks say the seg fault is there, others say it works with Apache 2.0? Many thanks. -- John ________________________________________________________________...

Help Needed: Upgrade Fedora 4 / Apache 2 to PHP 5.2.x from 5.0.4
Help Needed: Upgrade Fedora 4 / Apache 2 to PHP 5.2.x from 5.0.4 I've been testing Joomla as a content manager for the County offices, and it looks pretty good. Unfortunately, I decided to upgrade it from the 1.0.13 version to 1.5 as we get ready to go live with the web site... and the update installation gives an error in XML processing, which seems (from what I've been able to dredge up in forum discussions) to stem from a known bug in PHP 5.0.4... I've seen this same error from a couple of other programs that want to upload XML data to PHP based server software, too, so I'm inclined to believe the problem is on the server side and that it has at least something to do with PHP, i.e. either a bug or at least a setup/config problem... So I decided to upgrade the PHP from 5.0.4 to 5.2.4, but I couldn't find a binary set for Fedora 4, so it has to be compiled.... and I can't get it to install. Actually, that's not quite true - I did get it to install with the base config, but that didn't include some needed stuff (e.g. mysqli), and when I took the config parameters from the 5.0.4 version (from the output of aboutphp.php) and tried those with the config build, it complained about not finding apxs. I don't find apxs anywhere on the system, so I'm stuck there (as far as building the PHP 5.2.4). The install docs from php.net call for you to build Apache from source, which I gather will create apxs as part of the build, but - having now...

PHP 5.2.0 and Python 2.5
Hi Guys, I need some wisdom from you. Is it possible to have PHP pages posting to python scripts on the server side and returning values back to the calling PHP files? Like, if my enterval.php form's action=" think.py", would the two scripts be able to talk to each other? Thanks and Best Regards, "Shortash" Shortash wrote: > Hi Guys, > > I need some wisdom from you. Is it possible to have PHP pages posting > to python scripts on the server side and returning values back to the > calling PHP files? Like, if my enterval.php form's action=" t...

PHPBB2, PHP 4.3.4, MySQL 4.1.1, Apache 2.0.49, Fedora 2
My combination is: PHPBB2, PHP 4.3.4, MySQL 4.1.1, Apache 2.0.49, Fedora 2 Anyone out there has a successful combination of newer versions ? fr gr Erik ...

2 * 2 * 2 * 2 or pow(2, 4)?
Hi , I hope this isn't too trivial to ask, but I'm evaluating a polynomial that involve lots of terms like x^2y^2z^3, and although I can use the power function pow(a, b), I wonder if just writing x*x*y*y*z*z*z for example wouldn't be more efficient than pow(x, 2)*pow(y, 2)*pow(z,3). Or is it all the same? Thanks, - Olumide Olumide wrote: > I hope this isn't too trivial to ask, but I'm evaluating a polynomial > that involve lots of terms like x^2y^2z^3, and although I can use the > power function pow(a, b), I wonder if just writing x*x*y*y*z*z*z for > exam...

linspace(2,2,2) returns [2 2] ??
May be the help for linspace should change? It says: "LINSPACE(X1, X2, N) generates N points between X1 and X2." Notice, it says BETWEEN. But when I ask for 2 points, between 2 and 2: ---------------- EDU>> linspace(2,2,2) ans = 2 2 --------------- May be mathematically this is ok? i.e. there are infinite points between the point and itself? (on the real line), but from programming point of view, it is confusing. no? --Nasser Maybe it should say "generates N points between X1 and X2, inclusive." What did you expect to get back as an answer from issuing linspace(2,2,2)? I didn't understand your statement "there are infinite points between the point and itself?" How do you have an infinite number of points between 2 and 2? I can see an infinite number of points between 2 and something that's not itself, like 2.00000000000000001, but if they are absolutely perfectly identical how are you getting an infinite number of points? On 10/10/2010 11:16 AM, Image Analyst wrote: > Maybe it should say "generates N points between X1 and X2, inclusive." > > What did you expect to get back as an answer from issuing linspace(2,2,2)? > I was just not expecting it to "work". may be an error message. That is not the point. The point is that it did work. > I didn't understand your statement "there are infinite points between the point and it...

php 5.3.8 und Apache 2.2.19
Hallo zusammen Nachdem die vc6-Versionen nicht mehr unterst=FCtzt werden, wollte ich auf vc9 updaten. Habe daher das vc9 threadsave heruntergeladen. Dann noch den Apache von http://www.apachelounge.com/download/, welcher f=FCr vc9 zust=E4ndig sein sollte. Leider kommt mir beim aufstarten, wenn ich LoadModule php5_module "C:/ Programme/PHP/php5.dll" aktiviere folgende Fehlermeldung: httpd.exe: Syntax error on line 114 of C:/Programme/Apache Software Foundation/Apache2.2/conf/httpd.conf: Can't locate API module structure `php5_module' in file C:/Programme/php/php5.dll: No error Dies deutet laut Suche auf eine falsche Version hin, doch eigentlich m=FCsste es ja so funktionieren. Gruss, Markus On 8/29/2011 5:30 AM, snoopy78 wrote: > Hallo zusammen > > Nachdem die vc6-Versionen nicht mehr unterst�tzt werden, wollte ich > auf vc9 updaten. Habe daher das vc9 threadsave heruntergeladen. Dann > noch den Apache von http://www.apachelounge.com/download/, welcher f�r > vc9 zust�ndig sein sollte. > > Leider kommt mir beim aufstarten, wenn ich LoadModule php5_module "C:/ > Programme/PHP/php5.dll" aktiviere folgende Fehlermeldung: > > httpd.exe: Syntax error on line 114 of C:/Programme/Apache Software > Foundation/Apache2.2/conf/httpd.conf: Can't locate API module > structure `php5_module' in file C:/Programme/php/php5.dll: No error > > Dies deutet laut Suche auf eine falsche Version hin, doch eigentlich ...

Trouble installing PHP 5.3 on WinXP, Apache 2.2
Hi, I'm trying to install PHP 5.3 on Apache 2.2, WinXP. I've added this line to my httpd.conf file LoadModule php5_module "C:/PHP/php5apache2_2.dll" but when I start Apache using "httpd -k start", I'm getting this error ... C:\Program Files\Apache Software Foundation\Apache2.2\bin>httpd -k start httpd: Syntax error on line 503 of C:/Program Files/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load C:/PHP/ php5apache2_2.dll into server: The specified module could not be found. I have verified that the file exists. Can anyon...

Apache 2.0.50 failed to start after installing PHP 5.0.1
The error in the 'eventviewer' is as follow: Faulting application Apache.exe, version 2.0.50.0, faulting module ole32.dll, version 5.2.3790.138, fault address 0x0001e5e3. It was working with PHP 5.0.0 but then I put the 5.0.1, it won't start the Apache with the above error. Help. Thanks I somehow isolated the problem to "iisfunc.dll". I commented it and apache started with no error. Is it a bug or ???. Thanks "Sarah Tanembaum" <sarahtanembaum@yahoo.com> wrote in message news:2og6f2Faado8U1@uni-berlin.de... > The error in the 'eventviewer&#...

Web resources about - PHP 5.2.1: cli does load php_mysql.dll while the same script executed by apache 2.2 fails Call to undefined function mysql_connect() - comp.lang.php

Noelinho (@Noelinho) on Twitter
Sign in Sign up To bring you Twitter, we and our partners use cookies on our and other websites. Cookies help personalize Twitter content, tailor ...

User talk:ClueBot Commons - Wikipedia, the free encyclopedia
If you believe that ClueBot NG has made a mistake, please follow the directions in the warning it gave or click here . Please do not report them ...

, Web Design Articles & Inspiration, Social Marketing, SEO, Design Feeds
Design Feeds is your portal to the latest design articles collected from a variety of sources. Warning : mysql_connect() [ function.mysql-connect ...

WordPress › Error
( ! ) Warning: mysql_connect(): Can't connect to MySQL server on '10.1.1.78' (113) in /data1/www/gamearena/html/wp-includes/wp-db.php on line ...

Sonntag Sports Management - Get Started
Get started with Sonntag Sports Management Warning : include(../../mysql_connect.php): failed to open stream: No such file or directory in / ...

All Publicists - Find a publicist for your next publicity job
AllPublicists helps companies find best publicists and obtain publicity for their products and services.

Most popular baby names in - compiled by BabyNameFacts.com
Warning : mysql_connect() [ function.mysql-connect ]: Access denied for user 'targeese_terry'@'localhost' (using password: YES) in /home/tar ...

Function.mysql-connect Blogs Community
Buzz Bums features the best function.mysql-connect blogs on the internet! Warning : mysql_connect() [ function.mysql-connect ]: Access denied ...

dailyserver.com
Access denied for user 'dailyserver'@'localhost' (using password: YES)Warning: mysql_select_db(): Access denied for user 'root'@'localhost' (using ...

E-mail Newsletter Form with jQuery, AJAX, MySQL and PHP :: d. drew design, a classic design and marketing ...
E-mail Newsletter Form with jQuery, AJAX, MySQL and PHP Download files: newsletter_files.zip Difficulty level: Intermediate To get started, ...

Resources last updated: 3/23/2016 8:44:08 PM