ANNOUNCE: Tcl/Tk 8.4.6 rpm specification with thread 2.5.2 extension #2
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 http://jfontain.free.fr/tcltk-8.4.6-2.spec Generated and tested on an up-to-date Red Hat Fedora Core 1 i386 system. The rpms install under /opt/tcltk and therefore do not conflict and peacefully coexist with the stock Redhat Tcl and Tk rpms. To build the rpms, download the Tcl/Tk 8.4.6 and Thread 2.5.2 sources from http://download.sourceforge.net/tcl/ into the /usr/src/redhat/SOURCES/ directory, place the specification file in the /usr/src/redhat/SPECS/ directory, then from that directory, type: ~ # rpmbuild -bb --clean tcltk-8.4.6-2.spec Note: - - Includes the window manager patch for Tk that restores the maximize button in the KDE environment. - - You may change the installation directory and turn on the thread extension at the beginning of the specification file. - -- Jean-Luc Fontaine mailto:jfontain@free.fr http://jfontain.free.fr/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFAcAqxkG/MMvcT1qQRAp9RAJ9x2MAXDaaJYw4TTBCPAM3aSCm0xwCeILbJ tbgvOaiKiV80H0mtUjxBnJs= =6JBn -----END PGP SIGNATURE----- ...

ANNOUNCE: Tcl/Tk 8.4.6 rpm specification with thread 2.5.2 extension
It can be found at: http://jfontain.free.fr/tk-8.4.6-1.spec Generated and tested on an up-to-date Red Hat Fedora Core 1 i386 system. The rpms install under /opt/tcltk and therefore do not conflict and peacefully coexist with the stock Redhat Tcl and Tk rpms. To build the rpms, download the Tcl/Tk 8.4.6 and Thread 2.5.2 sources from http://download.sourceforge.net/tcl/ into the /usr/src/redhat/SOURCES/ directory, place the specification file in the /usr/src/redhat/SPECS/ directory, then from that directory, type: # rpmbuild -bb --clean tcltk-8.4.6-1.spec Note: you may change the installation directory and turn on the thread extension at the beginning of the specification file. -- Jean-Luc Fontaine mailto:jfontain@free.fr http://jfontain.free.fr/ ...

ANNOUNCE: Tcl/Tk 8.4.7 rpm specification with thread 2.5.2 extension
http://jfontain.free.fr/tcltk-8.4.7-1.spec Generated and tested on an up-to-date Red Hat Fedora Core 2 i386 system. The rpms can install under /opt/tcltk (see notes below) in order not to conflict and peacefully coexist with the stock Redhat Tcl and Tk rpms. To build the rpms, download the Tcl/Tk 8.4.7 and Thread 2.5.2 sources from http://download.sourceforge.net/tcl/ into the /usr/src/redhat/SOURCES/ directory, place the specification file in the /usr/src/redhat/SPECS/ directory, then from that directory, type: # rpmbuild -bb --clean tcltk-8.4.7-1.spec Notes: - You may change the installation directory and turn on the thread extension at the beginning of the specification file. -- Jean-Luc Fontaine mailto:jfontain@free.fr http://jfontain.free.fr/ ...

ANNOUNCE: Tcl/Tk 8.5a1 rpm specification with thread 2.5.2 extension #2
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 http://jfontain.free.fr/tcltk-8.5a1-2.spec Generated and tested on an up-to-date Red Hat Fedora Core 1 i386 system. The rpms install under /opt/tcltk and therefore do not conflict and peacefully coexist with the stock Redhat Tcl and Tk rpms. To build the rpms, download the Tcl/Tk 8.5a1 and Thread 2.5.2 sources from http://download.sourceforge.net/tcl/ into the /usr/src/redhat/SOURCES/ directory, place the specification file in the /usr/src/redhat/SPECS/ directory, then from that directory, type: ~ # rpmbuild -bb --clean tcltk-8.5a1-2.spec Notes: - - Includes the window manager patch for Tk that restores the maximize button in the KDE environment. - - For Tk, the anti-aliased fonts option is turned on. - - You may change the installation directory and turn on the thread extension at the beginning of the specification file. - -- Jean-Luc Fontaine mailto:jfontain@free.fr http://jfontain.free.fr/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFAcAq9kG/MMvcT1qQRAi07AKDD7zMz5WFdwvz4GFcbh95VuPKGewCeJJ86 XWFfg1JAd4mnicbd+bW9OTA= =0t3Q -----END PGP SIGNATURE----- ...

ANNOUNCE: Tcl/Tk 8.5a1 rpm specification with thread 2.5.2 extension
It can be found at: http://jfontain.free.fr/tk-8.5a1-1.spec Generated and tested on an up-to-date Red Hat Fedora Core 1 i386 system. The rpms install under /opt/tcltk and therefore do not conflict and peacefully coexist with the stock Redhat Tcl and Tk rpms. To build the rpms, download the Tcl/Tk 8.5a1 and Thread 2.5.2 sources from http://download.sourceforge.net/tcl/ into the /usr/src/redhat/SOURCES/ directory, place the specification file in the /usr/src/redhat/SPECS/ directory, then from that directory, type: # rpmbuild -bb --clean tcltk-8.5a1-1.spec Notes: For Tk, the anti-aliased fonts option is turned on. You may change the installation directory and turn on the thread extension at the beginning of the specification file. -- Jean-Luc Fontaine mailto:jfontain@free.fr http://jfontain.free.fr/ ...

ANNOUNCE: Tcl/Tk 8.4.4 rpms with thread 2.5.2 extension
You may find the specification file, that you can use to build the rpm binaries on your Redhat (Suse may also work) system at: http://jfontain.free.fr/tcltk-8.4.4-1.spec To build, download the Tcl/Tk 8.4.4 and Thread 2.5.2 sources from http://prdownloads.sourceforge.net/tcl/ into your /usr/src/redhat/SOURCES/ directory, place the specification file in your /usr/src/redhat/SPECS/ directory, then from that directory, type: # rpmbuild -bb --clean tcltk-8.4.4-1.spec Note: you may change the installation directory and turn on the thread extension at the beginning of the specification file. Jean-Luc Fontaine (http://jfontain.free.fr/) ...

ANNOUNCE: Tcl/Tk 8.4.5 rpms with thread 2.5.2 extension
They can be found at: http://jfontain.free.fr/tcl-8.4.5-1.i386.rpm http://jfontain.free.fr/tk-8.4.5-1.i386.rpm http://jfontain.free.fr/tk-8.4.5-1.spec They were generated on an up-to-date Redhat 9 i386 system. They install under /opt/tcltk and therefore does not conflict and peacefully coexists with the stock Redhat Tcl and Tk rpms. To rebuild them, download the Tcl/Tk 8.4.4 and Thread 2.5.2 sources from http://prdownloads.sourceforge.net/tcl/ into the /usr/src/redhat/SOURCES/ directory, place the specification file in the /usr/src/redhat/SPECS/ directory, then from that directory, type: # rpmbuild -bb --clean tcltk-8.4.5-1.spec Note: you may change the installation directory and turn on the thread extension at the beginning of the specification file. -- Jean-Luc Fontaine mailto:jfontain@free.fr http://jfontain.free.fr/ ...

ANNOUNCE: Tcl/Tk 8.4.9 rpm specification with thread 2.6 extension
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 http://jfontain.free.fr/tcltk-8.4.9-2.spec Generated and tested on an up-to-date Red Hat Fedora Core 3 i386 system. The rpms can install under /opt/tcltk (see notes below) in order not to conflict and peacefully coexist with the stock Redhat Tcl and Tk rpms. To build the rpms, download the Tcl/Tk 8.4.9 and Thread 2.6 sources from http://download.sourceforge.net/tcl/ into the /usr/src/redhat/SOURCES/ directory, place the specification file in the /usr/src/redhat/SPECS/ directory, then from that directory, type: ~ # rpmbuild -bb --clean tcltk-8.4.9-2.spec Notes: - - You may change the installation directory and turn on the thread extension at the beginning of the specification file. - -- Jean-Luc Fontaine mailto:jfontain@free.fr http://jfontain.free.fr/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFByus2kG/MMvcT1qQRArObAJsGSwUEyMDSJ48F/WaBHZM5oh7TCACgtUKT /YD5v6DlbojUEpdVtK5UKZM= =0Pre -----END PGP SIGNATURE----- On Thu, 23 Dec 2004 16:58:46 +0100, Jean-Luc FONTAINE wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > http://jfontain.free.fr/tcltk-8.4.9-2.spec > > Generated and tested on an up-to-date Red Hat Fedora Core 3 i386 system. > The rpms can install under /opt/tcltk (see notes below) in order not to > conflict and peacefully coexist with the stock Redhat Tcl and Tk rpms. > > To b...

Segmentation fault returning value in Thread for Tcl 8.3.5/Thread 2.5 (2.1.5)
I wrote a simple "exec" function that runs the specified program in another thread, splits out the stdout and stderr output and returns asynchronously. (I attached the script and traceback from the core dump at the end of this message.) I started off using Tcl 8.3.5/Thread 2.5 (2.1.5). It seems that if the script running in the other thread returns a value using "return $result", I get a core dump. But, if I return the value using "set result", it doesn't core dump. If I use Tcl 8.4.5/Thread 2.5.2, the script throws an error condition if I use "return $result", but not if I use "set result". It should not be throwing an error condition. (It doesn't matter whether the print.tcl prints to stderr, it happens when only stdout is printed as well.) Since Tcl and the Thread package is mature, I have a feeling I am doing something fundamentally wrong, but it is not rearing it's ugly head yet. Does anybody see the error or know if there is a Tcl or Thread bug related to this problem? Thanks, Rob test.tcl #!/bin/csh -f # comment out next line \ exec tclsh8.3 $0 $argv:q #exec tclsh8.4 $0 $argv:q package require Thread namespace eval DE { proc threadError { threadid errorInfo } { global DE::threadError set threadError 1 return $threadError } proc texec { args } { global DE::thread DE::threadError errorInfo errorCode ...

Will Ruby 1.8.2 include tcl/tk 8.4.x instead of 8.3?
Will Ruby 1.8.2 release come with tcl/tk 8.4.7 libraries? Thanks. Hi, From: "H. Simpson" <nospam@asdlkfjhasldkjfsadlfhskadjfahsldfks.com> Subject: Will Ruby 1.8.2 include tcl/tk 8.4.x instead of 8.3? Date: Mon, 2 Aug 2004 17:01:40 +0900 Message-ID: <HwmPc.1858$Z56.480@newssvr33.news.prodigy.com> > Will Ruby 1.8.2 release come with tcl/tk 8.4.7 libraries? Is that a binary package of Ruby 1.8.2 ? If you say about source files, Ruby/Tk can work with Tcl/Tk8.4.7. I already tested that Ruby/Tk works with Tcl/Tk8.4.7 and 8.5a1 (and ActiveTcl-8.4.6.1 binary package). U...

Spinbox - TCL/Tk 8.4
spinbox was not supported in ruby 1.8.2 'cause it uses tcl/tk 8.3 which does not have spinbox. I got Tk spinboxes to work via a kludge. I stole a copy of tcl 8.4 and tk 8.4 from Python 2.4 and laid them onto Ruby 1.8.2. add the tcl8.4 folder and tk8.4 folders from python into the ruby lib folder (you can leave the original tcl 8.3 and tk 8.3 alone) put a copy of the tcl84.dll and tk84.dll from python into the ruby bin folder. rename your old copies of tcl83.dll and tk83.dll just in case rename the new tcl84.dll and tk84.dll to 83 and now tk 8.4 works with ruby ...

expect-5.44.1, tcl-8.4.15, gcc-4.2.2
expect-5.44.1 build fails with the following error configure: configuring in testsuite configure: running /bin/sh '/path/to/src/expect-5.44.1/expect-5.44.1/testsuite/configure' --prefix=/path/to/expect-5.44.1 '--with-tcl=/path/to/tcl-8.4.15/lib' '--with-tclinclude=/path/to/src/tcl-8.4.15/tcl8.4.15/generic' '--with-tk=/path/to/tk-8.4.15/lib' '--with-tkinclude=/path/to/tk-8.4.15/include' '--prefix=/path/to/expect-5.44.1' 'CC=gcc -m32' 'CPPFLAGS=-I/path/to/include ' 'LDFLAGS=-Wl,-rpath,/path/to/lib -Wl,-rpath,/path/to/lib64 -Wl,-rpath,/path/to/libiconv-1.12/lib -Wl,--enable-new-dtags -L/path/to/lib -L/path/to/lib64 ' --cache-file=/dev/null --srcdir=/path/to/src/expect-5.44.1/expect-5.44.1/testsuite configure: warning: CC=gcc -m32: invalid host type configure: warning: CPPFLAGS=-I/path/to/include : invalid host type configure: error: can only configure for one host and one target at a time configure: error: /bin/sh '/path/to/src/expect-5.44.1/expect-5.44.1/testsuite/configure' failed for testsuite The usage for testsuite/configure indicates that the syntax above is wrong: Usage: configure [options] [host] That is, the VAR=VALUE syntax is accepted in the toplevel configure, but not in testsuite/configure. I just ran the top-level configure to build expect, which then invoked testsuite/configure as part ...

difference between tcl 8.4.2 & 8.4.4
% exec $env(COMSPEC) /c net config This command now fails on Tcl 8.4.4 What can I do instead? to run with either version of tcl and windows 98. "couldn't execute "C:\WINDOWS\COMMAND.COM": no such file or directory" Running on Win 98. Win XP is ok. Peter Campbell wrote: > % exec $env(COMSPEC) /c net config > > This command now fails on Tcl 8.4.4 > What can I do instead? to run with either version of tcl and windows 98. > > "couldn't execute "C:\WINDOWS\COMMAND.COM": no such file or directory" > > Running on Win 98. > Win XP is ok. This is a known bug that is already fixed. 8.4.5 will be out by the end of the week with this corrected. -- Jeff Hobbs, The Tcl Guy http://www.ActiveState.com/, a division of Sophos Hi Peter, Peter Campbell <pc@acs.co.nz> writes: > % exec $env(COMSPEC) /c net config > > This command now fails on Tcl 8.4.4 > What can I do instead? to run with either version of tcl and windows 98. > > "couldn't execute "C:\WINDOWS\COMMAND.COM": no such file or > directory" > > Running on Win 98. > Win XP is ok. This was discussed recently, check google. IIRC, this is a bug in 8.4.4, to be fixed in 8.4.5. benny ...

Tcl/Tk 8.5 vs iwidget 4.0.2
Hi! I have a developer who is trying Tcl/Tk 8.5 out with a program that he has been using with Tcl/Tk 8.4 . He mentioned some iwidget behavior differences. For instance, he writes: In the disjointlistbox widget the buttonplacement configuration parameter seems to be ignored. In my application it is set to center, and it is centered in 8.4 but not 8.5. Has there been a 8.5 Iwidget release to correspond with the tcl8.4 release? Also noticed some widget background color differences. Where in tcl84 fields and listboxes have gray backgrounds (default) and in tcl85 they are white. I'm noticing changes mostly in the widgets, appear to be cosmetic, except for the -buttonplacement configuration parameter that is ignored in the disjointlistbox IWidget. What kinds of changes has to be made to an Iwidgets program to get, for instance, the widget background colors back to gray? And what about the disjointlistbox widget's button placement? Is that no longer supported, or is there a new argument that helps with this? And is Iwidgets 4.0.2 the right version to be using with Tcl/Tk 8.5.4? Here's a code example: $ cat example.tcl # ---------------------------------------------------------------------- # DEMO: disjointlistbox in [incr Widgets] # ---------------------------------------------------------------------- package require Iwidgets 4.0 iwidgets::disjointlistbox .dlb -buttonplacement center -lhslabeltext "Left Side" \ -rhslabeltext "Right Side" pa...

Tcl/Tk 8.6.3, Itcl 4.0.2, sqlite 3.8.7 Release Candidates
Release candidate downloads of the 8.6.3 releases of Tcl and Tk, Itcl 4.0.2, and sqlite 3.8.7 may now be found at https://sourceforge.net/projects/tcl/files/Tcl/8.6.3/ The actual releases of these files should come on October 29. Until then, enjoy this advance preview, and if you find anything catastrophically wrong with them, please inform me so we can fix the problem before the true release. -- | Don Porter Applied and Computational Mathematics Division | | donald.porter@nist.gov Information Technology Laboratory | | http://math.nist.gov/~DPorter/...

DOWNLOAD ASSYST 7.2! GERBER 8.1! LECTRA 5.2! PAD 4.5! OPTITEX 9.5! TUKACAD 8.62! more
DOWNLOAD ASSYST 7.2! GERBER 8.1! LECTRA 5.2! PAD 4.5! OPTITEX 9.5 TUKACAD 8.62! INVESTRONICA7.44! and more DOWNLOAD CAD SOFTWARE WITH PASSWORD BEFORE PAYMENT => YOU CAN SE INSIDE BEFORE MAKE FINAL DECISION Pls visit our website to see our list and screenshoot of garment CAD software. All software are work well and passed our testing before show in our web site. http://www.freewebtown.com/garcad/ http://garcad.125mb.com http://garcad.netfirms.com Email: garCAD@gmail.com * Hot software: 1/ ASSYST Bullmer cad 7.2 2/ Gerber Accumark Professinal 8.1 (*********NEW*************) Englis + Germany 3/ Gerber Accumark Professinal 8.08 (full functions including Neste server, batch) 4/ Lectra Modaris V5R1C1 (multilanguages) 5/ Lectra Diamino V5R2 (multilanguages) 6/ PAD 4.5 (including nester) 7/ Optitex 9.5 (18 languages) 8/ Invesmark 7.4.4 9/ Tukacad 8.62 10/ Lectra collections with over 100 software of all version and more GarCAD team still bring Garment CAD software to all with cheap cost. ******************************************************************** Dear all, Sorry to inform that now we in the war time :-( Someones fighting to us and we lost our domain and webspace also. So now we must change domain and move our webspace. We also think that this status is not short term and we must find out solution for this. There are some cheaters aware to us due to we alway give real software and do the real deal for our buyer. Bu...

ANNOUNCE: Tcl/Tk 8.4.8 Release
Tcl/Tk 8.4.8 Release Announcement November 22, 2004 The Tcl Core Team is pleased to announce the 8.4.8 releases of the Tcl scripting language and the Tk toolkit. This is the eighth patch release of Tcl/Tk 8.4. More details can be found below. We would like to express our gratitude to all those who submit bug reports and patches. This information is invaluable in enabling us to identify and eliminate problems in the core. Where to get the new releases: ------------------------------ Tcl/Tk 8.4.8 sources are freely available as open source from the Tcl Developer Xchange web site at: http://www.tcl.tk/software/tcltk/8.4.html This web page also contains additional information about the releases, including new features and notes about installing and compiling the releases. Sources are always available from the Tcl SourceForge project's file distribution area: http://sourceforge.net/project/showfiles.php?group_id=10894 Windows, Linux, Solaris and HP-UX binaries are available from: http://www.activestate.com/Tcl Mac OS X binaries are available from: http://tcltkaqua.sourceforge.net/ Additionally, SuSE Linux RPMs are available from: ftp://ftp.suse.com/pub/projects/tcl/ For additional information: --------------------------- Please visit the Tcl Developer Xchange web site: http://www.tcl.tk/ This site contains a variety of information about Tcl/Tk in general, the core Tcl and Tk distributions, Tcl development tools, and much more. Thank y...

tcl/tk 8.5 side 8.4
Hello i run windows vista familiy. I code with Tcl/Tk 8.4 with no problem. I would like to know if i can install Tcl/Tk 8.5 to test certain new possibilities without un-installing Tcl/Tk 8.4 ? thank you for help jerome groupeCompteRendu@gmail.com wrote: > Hello > i run windows vista familiy. I code with Tcl/Tk 8.4 with no problem. > I would like to > know if i can install Tcl/Tk 8.5 to test certain new possibilities > without un-installing > Tcl/Tk 8.4 ? > thank you for help > jerome Yes -- +------------------------------------------------------------------------+ | Gerald W. Lester | |"The man who fights for his ideals is the man who is alive." - Cervantes| +------------------------------------------------------------------------+ ...

wxPython 2.4.2.4 segmentation fault on (Python 2.2.2 SuSE 8.2)
Hi everything runs normally but exiting demo.py or any app we get Segmentation Fault wxPython was built from sources (as per readme.1st.txt) as latest downloaded from wxPython site while building wxGTK several errors reported as could not read from makefile.in files please assist Sanjay Minni Note that we used GTK1 i.e. compiled without the GTK2 option on SuSE 8.2 Thanks Sanjay Minni ...

TCL is not thread safer in TCL 8.3 or 8.4... Any plans to fix this?
It is a shame that I can't upgrade one of my applications due to this problem, though the memory leaks also intorduced in 8.3 and 8.4 are problem as well. :( I have a process that spawn a configurable number of thread with a TCL intrepeter in each one. The interps are isolated and do not communicate or share anything withe each other. Each thread is a rule processor that is handed TCL scripts based on what events occurs within a multi process enviroment rnaing across the whole itnerprize... Works great with TCL 8.2, not a single problem... But with TCL 8.3 and TCL 8.4 we get quite a few run time errors and/or data corruption and core dumps that all leads back to TCL. :( Quite a shame! cwhooks@landacorp.com wrote: > It is a shame that I can't upgrade one of my applications due to this > problem, though the memory leaks also intorduced in 8.3 and 8.4 are > problem as well. :( What are the bug report ID numbers of the issues giving you trouble? -- | Don Porter Mathematical and Computational Sciences Division | | donald.porter@nist.gov Information Technology Laboratory | | http://math.nist.gov/~DPorter/ NIST | |______________________________________________________________________| Don Porter <dgp@email.nist.gov> wrote: > cwhooks@landacorp.com wrote: >> It is a shame that I can't upgrade one of my applications due to this >> problem, though the memory leaks also intorduced ...

Bug789040 came back in Tcl 8.4.6 and Tcl 8.5.
Dear All, Bug 789040 caused exec error in Windows 9x and was fixed in 10/04/03. But it came back in Tcl 8.4.6 and Tcl 8.5. Tcl Windows 9x users should be alerted to the possible failure of exec in the current Tcl 8.4.6 and 8.5 releases due to this bug. Chengye Mao http://www.geocities.com/~chengye Chengye Mao wrote: > Bug 789040 caused exec error in Windows 9x and was fixed in 10/04/03. > But it came back in Tcl 8.4.6 and Tcl 8.5. Tcl Windows 9x users > should be alerted to the possible failure of exec in the current Tcl > 8.4.6 and 8.5 releases due to this bug. Have you identified at what point it was reintroduced? Was the fix causing other issues and reverted, or simply reintroduced by accident? -- Jeff Hobbs, The Tcl Guy http://www.ActiveState.com/, a division of Sophos Jeff Hobbs <jeffh@activestate.com> wrote in message news:<409EEDB5.40905@activestate.com>... > Chengye Mao wrote: > > Bug 789040 caused exec error in Windows 9x and was fixed in 10/04/03. > > But it came back in Tcl 8.4.6 and Tcl 8.5. Tcl Windows 9x users > > should be alerted to the possible failure of exec in the current Tcl > > 8.4.6 and 8.5 releases due to this bug. > > Have you identified at what point it was reintroduced? Was the > fix causing other issues and reverted, or simply reintroduced by > accident? Reintroduced in rev. 1.41 of tclWinPipe.c in Feb, 2004. The bug was a missing space between tclpip.dll and...

"::tcl::tm::UnknownHandler ::tclPkgUnknown msgcat 1.4" caused by replacing Tcl 8.4.1 with 8.5.7
In the blog http://planet.larrythecow.org/archives/2009-07-26.html "The Twouble with Tcl" Iain Buchanan shows that redefining OPEN proc leads to the errors similar to what I am getting - when I replaced Tcl 8.4.1 with Tcl 8.5.7. In my case I don't know the exact root cause though ... Any ideas how I should proceed with debugging this issue ? Thanks, Alex tclsh c:/Tornado/host/resource/hutils/tcl/makeSymTbl.tcl ppc tmp.o symTbl.c invalid command name "::tcl::tm::UnknownHandler" while executing "::tcl::tm::UnknownHandler ::tclPkgUnknown msg...

BLT binaries for TCL 8.4 on Solaris 2.8
Does anyone know where I can get these? and in a hurry? It would be much appreciated! Thanks, David ...

Tcl 8.3.2 installation on SunOS 5.8
Hello, I'm trying to install Expect on a Sun Ultra-80 Sun OS 5.8 and first have to install Tcl 8.3.2, but am running in to issues with installing Tcl. Please forgive if these are easy questions as my UNIX experience is limited. I've searched this list, as well as a google, for resolution but can't seem to locate the workaround. I've run the ./configure script, and it seemed to run okay for the most part, but then tried to run 'make' and it reported the following: river1% make make: Command not found I checked the config.log for any errors and found that it reported the following: configure:1775: cc -o conftest conftest.c 1>&5 ../configure: cc: not found configure: failed program was: #line 1749 "configure" #include "confdefs.h" #include <sys/types.h> #include <dirent.h> int main() { #ifndef _POSIX_SOURCE # ifdef __Lynx__ /* * Generate compilation error to make the test fail: Lynx headers * are only valid if really in the POSIX environment. */ missing_procedure(); # endif #endif DIR *d; struct dirent *entryPtr; char *p; d = opendir("foobar"); entryPtr = readdir(d); p = entryPtr->d_name; closedir(d); ; return 0; } Is the install failing because of this: ../configure: cc: not found I've compiled different C programs on this machine several times, so it should be able to work. I'm installing this from my home directory (obviously not...