f



can't find package ceptcl while executing "package require ceptcl"

Hello,

I have a problem setting up the package ceptcl / udp sousmon
eggdrop.

I use a function of ntp server that searches for these apparently
packages to run at full speed.

After my research I found:

http://www.flightlab.com/~joe/gutter/doc/ceptcl-0.3/ceptcl.html
http://wiki.tcl.tk/11140


I was on http://www3.sympatico.ca/stuart.cassoff/software/index.html
I download: http://www3.sympatico.ca/stuart.cassoff/software/ceptcl-0.4.tar.gz

After ./Configure to make me its:

ceptcl# make
gcc -DPACKAGE_NAME=\"ceptcl\" -DPACKAGE_TARNAME=\"ceptcl\" -
DPACKAGE_VERSION=\"0.4\" -DPACKAGE_STRING=\"ceptcl\ 0.4\" -
DPACKAGE_BUGREPORT=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -
DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -
DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -
DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_LIMITS_H=1 -
DHAVE_SYS_PARAM_H=1 -DUSE_THREAD_ALLOC=1 -D_REENTRANT=1 -
D_THREAD_SAFE=1 -DTCL_THREADS=1 -DMODULE_SCOPE=extern\ __attribute__\
(\
(__visibility__\(\"hidden\"\)\)\) -D_LARGEFILE64_SOURCE=1 -
DTCL_WIDE_INT_TYPE=long\ long -DHAVE_STRUCT_STAT64=1 -DHAVE_OPEN64=1 -
DHAVE_LSEEK64=1 -DHAVE_TYPE_OFF64_T=1 -DUSE_TCL_STUBS=1   -I"./
generic" -I"/usr/include/tcl8.4"    -pipe -O2 -fomit-frame-pointer -
Wall -fPIC  -c `echo ./generic/ceptcl.c` -o ceptcl.o
gcc -DPACKAGE_NAME=\"ceptcl\" -DPACKAGE_TARNAME=\"ceptcl\" -
DPACKAGE_VERSION=\"0.4\" -DPACKAGE_STRING=\"ceptcl\ 0.4\" -
DPACKAGE_BUGREPORT=\"\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -
DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -
DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -
DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_LIMITS_H=1 -
DHAVE_SYS_PARAM_H=1 -DUSE_THREAD_ALLOC=1 -D_REENTRANT=1 -
D_THREAD_SAFE=1 -DTCL_THREADS=1 -DMODULE_SCOPE=extern\ __attribute__\
(\
(__visibility__\(\"hidden\"\)\)\) -D_LARGEFILE64_SOURCE=1 -
DTCL_WIDE_INT_TYPE=long\ long -DHAVE_STRUCT_STAT64=1 -DHAVE_OPEN64=1 -
DHAVE_LSEEK64=1 -DHAVE_TYPE_OFF64_T=1 -DUSE_TCL_STUBS=1   -I"./
generic" -I"/usr/include/tcl8.4"    -pipe -O2 -fomit-frame-pointer -
Wall -fPIC  -c `echo ./unix/ceptclUnix.c` -o ceptclUnix.o
../unix/ceptclUnix.c: In function 'CepCloseProc':
../unix/ceptclUnix.c:932: warning: pointer targets in passing argument
1 of 'unlink' differ in signedness
../unix/ceptclUnix.c: In function 'CreateCep':
../unix/ceptclUnix.c:2371: warning: pointer targets in passing argument
1 of 'tclStubsPtr->tcl_NewByteArrayObj' differ in signedness
../unix/ceptclUnix.c: In function 'Cep_OpenServer':
../unix/ceptclUnix.c:2664: warning: passing argument 6 of 'CreateCep'
makes integer from pointer without a cast
../unix/ceptclUnix.c: In function 'CepNotify':
../unix/ceptclUnix.c:2907: warning: pointer targets in assignment
differ in signedness
../unix/ceptclUnix.c:2932: warning: dereferencing type-punned pointer
will break strict-aliasing rules
../unix/ceptclUnix.c:2932: warning: pointer targets in passing argument
1 of 'rvl' differ in signedness
../unix/ceptclUnix.c:2933: warning: dereferencing type-punned pointer
will break strict-aliasing rules
../unix/ceptclUnix.c:2933: warning: pointer targets in passing argument
1 of 'rvl' differ in signedness
../unix/ceptclUnix.c: In function 'resolve':
../unix/ceptclUnix.c:3472: error: field '__h_errno_location' declared
as a function
../unix/ceptclUnix.c:3475: warning: initialization makes pointer from
integer without a cast
../unix/ceptclUnix.c:3476: warning: initialization makes pointer from
integer without a cast
../unix/ceptclUnix.c:3477: warning: initialization makes pointer from
integer without a cast
../unix/ceptclUnix.c:3478: warning: initialization makes pointer from
integer without a cast
../unix/ceptclUnix.c:3479: warning: initialization makes pointer from
integer without a cast
../unix/ceptclUnix.c:3481: warning: initialization makes pointer from
integer without a cast
../unix/ceptclUnix.c:3482: warning: initialization makes pointer from
integer without a cast
../unix/ceptclUnix.c:3489: error: expected identifier before '(' token
../unix/ceptclUnix.c: In function 'Cep_PassChan':
../unix/ceptclUnix.c:3751: warning: pointer targets in passing argument
2 of 'tclStubsPtr->tcl_DStringAppend' differ in signedness
../unix/ceptclUnix.c:3752: warning: pointer targets in passing argument
2 of 'tclStubsPtr->tcl_DStringAppend' differ in signedness
../unix/ceptclUnix.c:3759: warning: pointer targets in passing argument
2 of 'tclStubsPtr->tcl_DStringAppend' differ in signedness
../unix/ceptclUnix.c:3762: warning: pointer targets in passing argument
2 of 'tclStubsPtr->tcl_DStringAppend' differ in signedness
make: *** [ceptclUnix.o] Erreur 1

I do not understand how this problem away, so I continued
by installing version 0.3
http://www3.sympatico.ca/stuart.cassoff/software/ceptcl-0.3.tar.gz

And again a problem, but directly a ./Configure


ceptcl# ./configure
creating cache ./config.cache
checking for correct TEA configuration... ok
checking for Tcl configuration... found /usr/lib/tclConfig.sh
checking for existence of /usr/lib/tclConfig.sh... loading
configure: warning: --prefix defaulting to TCL_PREFIX /usr
configure: warning: --exec-prefix defaulting to TCL_EXEC_PREFIX /usr
checking for Cygwin environment... no
checking for mingw32 environment... no
checking how to run the C preprocessor... cc -E
checking for gcc... gcc
checking whether the C compiler (gcc  ) works... yes
checking whether the C compiler (gcc  ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking if the compiler understands -pipe... yes
checking for a BSD compatible install... /usr/bin/install -c
checking whether make sets ${MAKE}... yes
checking for ranlib... ranlib
checking for object suffix... o
checking for executable suffix... no
checking for required early compiler flags...  _LARGEFILE64_SOURCE
checking for 64-bit integer type... long long
checking for struct dirent64... no
checking for struct stat64... yes
checking for off64_t... yes
checking dirent.h... yes
checking for errno.h... yes
checking for float.h... yes
checking for values.h... yes
checking for limits.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for sys/wait.h... yes
checking for dlfcn.h... yes
checking for unistd.h... yes
checking for sys/param.h... yes
checking for strtod... yes
checking for Solaris2.4/Tru64 strtod bugs... ok
checking for getpeereid... no
checking for strlcpy... no
checking for Tcl public headers... /usr/include/tcl8.4
checking for building with threads... no (default)
configure: warning:
    Building ceptcl without threads enabled, but building against a
Tcl
    that IS thread-enabled.
checking how to build libraries... shared
checking if 64bit support is enabled... no
checking if 64bit Sparc VIS support is requested... no
checking system version (for dynamic loading)... ./configure: line
4895: syntax error near unexpected token `)'
../configure: line 4895: `       OSF*)'

Again I do not know how this problem hijacked ...

With apt-cache I find nothing corresponding to this package ...
Someone
a small idea?
Need more information?

0
deffice (6)
4/16/2009 12:55:30 PM
comp.lang.tcl 23428 articles. 2 followers. Post Follow

1 Replies
840 Views

Similar Articles

[PageSpeed] 36

On Apr 16, 2:55=A0pm, DEFFiCE <deff...@gmail.com> wrote:
<snip>
> checking if 64bit support is enabled... no
> checking if 64bit Sparc VIS support is requested... no
> checking system version (for dynamic loading)... ./configure: line
> 4895: syntax error near unexpected token `)'
> ./configure: line 4895: ` =A0 =A0 =A0 OSF*)'
>
> Again I do not know how this problem hijacked ...
>
> With apt-cache I find nothing corresponding to this package ...
> Someone
> a small idea?
> Need more information?

See http://wiki.tcl.tk/bash
0
mpc.janssen (384)
4/16/2009 2:31:24 PM
Reply:

Similar Artilces:

Can't locate object method "requirements_for_module" via package "CPAN::Meta::Requirements"
Hi Everyone, I'm blocked from installing modules by this problem: Can't locate object method "requirements_for_module" via package "CPAN::Met= a::Requirements" at /usr/lib/perl5/5.8.8/CPAN/Distribution.pm line 2802. The command I had run was cpan -if Business::ISBN I've taken a look at a closely related thread: https://groups.google.com/fo= rum/#!topic/perl.perl5.porters/GmmtAoaHhbc . It seems to me that the solut= ion was to uninstall and reinstall perl. Have I read that correctly, and/o= r can anyone give me other guidance out of this proble...

"Can't locate object method "PV" via package "B::SPECIAL""
When I try to use B::Lint I get the error Can't locate object method "PV" via package "B::SPECIAL"" Does anyone know where B::SPECIAL is defined? TIA, kj -- NOTE: In my address everything before the first period is backwards; and the last period, and everything after it, should be discarded. On Oct 20, 5:53 am, kj <so...@987jk.com.invalid> wrote: > When I try to use B::Lint I get the error > > Can't locate object method "PV" via package "B::SPECIAL"" > > Does anyone know where B::SPECIAL is defined? &...

"Can't find package xxx"
Probably the subject line indicates most of the issue. If I run a script containing a package require xxx tcl is complaining that it can't find the package, even though I've confirmed that it's definitely in a subdirectory in the tcl_pkgPath. No idea why this is happening, although it seems to me to be likely to be something very, very basic. This is running tcl 8.5 in Fedora 17. tcl_pkgPath variable is /usr/lib/tcl8.5 /usr/share/tcl8.5 /usr/lib/tk8.5 /usr/share/tk8.5. I don't know what other information you may need; please let me know and I'll attempt to provide it. On Sep 30, 10:29=A0pm, alex.rast.techni...@gmail.com wrote: > Probably the subject line indicates most of the issue. If I run a script = containing a > > package require xxx > > tcl is complaining that it can't find the package, even though I've confi= rmed that it's definitely in a subdirectory in the tcl_pkgPath. No idea why= this is happening, although it seems to me to be likely to be something ve= ry, very basic. > > This is running tcl 8.5 in Fedora 17. > > tcl_pkgPath variable is /usr/lib/tcl8.5 /usr/share/tcl8.5 /usr/lib/tk8.5 = /usr/share/tk8.5. > > I don't know what other information you may need; please let me know and = I'll attempt to provide it. please check the output of "package names". Remember, that package names are case sensitive. The package file "pkgIndex.tcl"...

Can't locate object method "first" via package "attempt" (perhaps you forgot to load "attempt"?) at ....
"Can't locate object method "first" via package "attempt" (perhaps you forgot to load "attempt"?) at E:\Inetpub\....\N_Clt_prf.pl line 38."I get this error on a perl program that prints & processed a form.Program was working until I made a simple (cosmetic) change. Could not find any reference to this error.Could anyone our there help?Thanks. "GMI" <Admin@GoMonitor.com> wrote in news:11bbgp4iovmsdb@corp.supernews.com: > "Can't locate object method "first" via package "attempt" (perhaps you >...

Can't find javax.* and other "extra" packages
I'm using JDK 1.4.1 for Java 2. According to the API docs, I can use javax packages, but when I add: import javax.crypto; I get an error that it can't find the package. Is there some special way to get javax packages? According to a web page at Sun, the crypto is supposed to be included with 1.4. (That's how they write it -- no 1.4.1 or 1.4.2, just written as 1.4.) And, along with this, I've found references to a java.mail API. I can't find anything like that documented in the JDK references. Where can I find this package? It would be a huge help...

Prowrap with BLT complaining "Can't find package BLT"
I'm on unix solaris 2.8 ... I successfully loaded (I'm assuming) BLT within the .../ajuba/TclPro1.5/src/blt2.4z directory. My tcl/tk script (blahblah.tk) works find when I run it with prowish83. In the tcl/tk script, I include the cmd "package require BLT". So BLT works fine when I run my tcl/tk script. But my problem is when I go to prowrap it. When I go to prowrap it, it doesn't complain during the wrapping process, BUT, when I go to execute the new stand-along file, it complains with the following: "can't find package BLT while execuing package require...

Can't locate object method "host" via package "URI::_foreign"
Hi, Here is the complete error message: Can't locate object method "host" via package "URI::_foreign" at PERL2EXE_STORAG E/Net/SDEE/Session.pm line 108. I get this error when I run ssss.exe file. My ssss.pl file works fine, this error pops up after I convert ssss.pl file to ssss.exe file using perl2exe utility. I am not sure what is wrong here. Any help will be greatly appreciated. Thanks. vkinger@hotmail.com wrote: >Can't locate object method "host" via package "URI::_foreign" at >PERL2EXE_STORAG >E/Net/SDEE/Session.pm line 108. ...

Can't locate object method "newFromJpeg" via package "GD::Image"
Hi. I'm trying to execute this Perl simple script: -------- #!/usr/bin/perl use GD; my $srcimage = GD::Image->newFromJpeg("image_news.jpg"); my ($srcW,$srcH) = $srcimage->getBounds(); --------- But I get this error message: ------- Can't locate object method "newFromJpeg" via package "GD::Image" at ../test.pl line 3. ------- I've got GD and libgd compiled with JPEG support turned on. 1) JPEG libs + Downloaded from http://www.ijg.org/files/jpegsrc.v6b.tar.gz + mkdir /usr/local/jpeg-6b + mkdir /usr/local/jpeg-6b/bin + mkdir /usr/local/...

Can't locate object method "blocking" via package "IO::Handle"
I am receiving the error message: Can't locate object method "blocking" via package "IO::Handle" at /usr/opt/perl5/lib/site_perl/5.8.0/Net/SSH/Perl.pm line 212, <GEN0> line 1. Here is a program that demonstrates the error: #!/usr/bin/perl use Net::SSH::Perl; my $ssh = Net::SSH::Perl->new("<your hostname>"); $ssh->login("username", "xxxxxxxx"); my $command = "date"; my ($out, $err, $rc) = $ssh->cmd($command); print "out: $out\n"; print "err: $err\n"; print "rc: $rc\n"; Here is some additional information about the system: # find /usr/opt/perl5 -name Handle.pm /usr/opt/perl5/lib/5.8.0/Tie/Handle.pm /usr/opt/perl5/lib/5.8.0/aix-thread-multi/IO/Handle.pm /usr/opt/perl5/lib64/5.8.0/Tie/Handle.pm /usr/opt/perl5/lib64/5.8.0/aix-thread-multi-64all/IO/Handle.pm # uname AIX # oslevel 5.2.0.0 # uname -M IBM,7038-6M2 I would appreciate any assistance in resolving this error. Kemton I found a solution to this problem after translating a Russian post with the same topic. They downgraded to a previous version of Net::SSH::Perl. I upgraded from 1.27 to 1.28, and it's working now. Kemton ...

Error: "The package jre needs to be reinstalled, but I can't find an archive for it."
The error in the subject heading has completely destroyed my ability to use apt-get. Whenever I try to use apt-get, I get that error message. Can anyone help me destroy it? I'm running Ubuntu 5.10, on an HP Pavillion ze2000. This started happening after I installed JRE on my system, but now it's wrecked everything! Can anyone help? Thanks in advance!! bhartman33@gmail.com wrote: > The error in the subject heading has completely destroyed my ability > to use apt-get. Whenever I try to use apt-get, I get that error > message. Can anyone help me destroy it? I'm running Ubuntu 5.10, on > an HP Pavillion ze2000. This started happening after I installed JRE > on my system, but now it's wrecked everything! Can anyone help? > Thanks in advance!! Welcome to apt. What repositories are you pointing apt to? Nico Kadel-Garcia wrote: > bhartman33@gmail.com wrote: > > The error in the subject heading has completely destroyed my ability > > to use apt-get. Whenever I try to use apt-get, I get that error > > message. Can anyone help me destroy it? I'm running Ubuntu 5.10, on > > an HP Pavillion ze2000. This started happening after I installed JRE > > on my system, but now it's wrecked everything! Can anyone help? > > Thanks in advance!! > > Welcome to apt. > > What repositories are you pointing apt to? Hi, Nico. Thanks for the response. I&...

Can't locate object method "OPEN" via package "Tk::Event::IO"
I'm trying to set up a basic queue of processes to run. Here is an example where I create 4 sleep jobs, submit NUM_PROCS many as pipe opens to start, and want fileevent to open any remaining jobs when a job is finished. Below this script is my error output. Anyone know why the open command inside command_ready isn't working? #!/usr/bin/perl use strict; use warnings; use Tk; use constant NUM_PROCS => 2; use constant DIR => "C:\\Documents and Settings\\Tim Harsch.BBRP2000\\Desktop\\Array-Image-Store\\SlideArray\\t"; my $mw = MainWindow->new(); $m...

Re: Can't locate object method "OPEN" via package "Tk::Event::IO"
I answered my own question. I needed to undefine the callback near the close of the filehandle. eg close $fh; $mw->fileevent( $fh, 'readable', '' ); ----- Original Message ----- From: "Tim Harsch" <harsch1@llnl.gov> To: "PTK" <ptk@lists.stanford.edu> Sent: Thursday, August 21, 2003 5:48 PM Subject: Can't locate object method "OPEN" via package "Tk::Event::IO" > I'm trying to set up a basic queue of processes to run. Here is an example > where I create 4 sleep jobs, submit NUM_PROCS...

Using "source" vs "package require" for Tcl application files
I would like to divide my Tcl application into separate files. Should I generally use "source" to combine the files, or should I use the package mechanism (package provide, package require, etc.)? What is the generally accepted practice? Thanks, Gregg On 30 dec, 01:04, GB <g...@invalid.invalid> wrote: > I would like to divide my Tcl application into separate files. Should I > generally use "source" to combine the files, or should I use the package > mechanism (package provide, package require, etc.)? > > What is the generally accepted practice? > > Thanks, > > Gregg IMHO use [source]. My reasoning: - The package mechanism is meant for getting access to general-purpose libraries, installed directly under the Tcl installation. - You talk of source files for your own application. So I would expect these files to reside in a directory containing that application. Then [source] is easier to use - and you guarantee that you get the source files from your application (otherwise a random package with the same name from the installation could interfer, if you are not careful with the library path) - Using [source] also makes it clear that these files are meant for your application only, not for more general purposes. Regards, Arjen Arjen Markus wrote: > On 30 dec, 01:04, GB <g...@invalid.invalid> wrote: >> I would like to divide my Tcl application into separate files. Should I >> gen...

"find"can't find?
I've found very funny situation with my matlab6.5. a=0:0.1:1 b=find(a==0.3) Then, ans is supposed to be 4, however, >>Empty matrix: 1-by-0 On Apr 4, 5:43 pm, "Seungyong " <jsyw...@gmaildot.com> wrote: > I've found very funny situation with my matlab6.5. > a=0:0.1:1 > b=find(a==0.3) > > Then, ans is supposed to be 4, however, > > >>Empty matrix: 1-by-0 This is a variation on a frequently asked question. The answer is simply that the decimal number 0.3 cannot be represented exactly in the double precision floating point arithmetic use...

"Couldn't find package liece with version nil"
(Sorry to keep bothering, and thanks to all the maintainers for their hard work and support.) When I select Tools->Packages->Update Installed Packages, I get the error quoted in the subject line. It looks like my packages-package-list somehow contains a package absent from package-get-base. I tried reading the code to figure out why this might be, but I can't even tell where packages-package-list is being set. Any thoughts? --=-=-= Content-Transfer-Encoding: quoted-printable * Dejan Mircevski <Dejan.Mircevski@gmail.com> writes: > When I select Tools-...

Why doesn't can't a vector of "Derived" be passed to function taking vector of "Base"?
I have these classes (elided methods): class Base { public: Base(string name) {...} }; class Derived : public Base { public: Derived(String name) : Base( name ) {...} }; And neither of these work: /*** ATTEMPT ONE **/ void create(std::vector<Base>& arr) { ... } int main() { std::vector<Derived> arr; create( arr ); } /*** ATTEMPT TWO **/ void create(std::vector<Base*>& arr) { ... } int main() { std::vector<Derived*> arr; create( arr ); } On 2008-04-28 17:20, Rob wrote: > I have these classes (elided methods): To answer the questions in the subject (which you really ought to repeat in the message): Because a vector<Derived> does not inherit from vector<Base> even though Derived inherits from Base. You might want to use vector<Base*> instead and store pointers to objects of type Derived in it. -- Erik Wikström Rob <someidunknown1234@yahoo.com> writes: > I have these classes (elided methods): > > class Base > { > public: > Base(string name) {...} > }; > > class Derived : public Base > { > public: > Derived(String name) : Base( name ) {...} > }; > > And neither of these work: > > /*** ATTEMPT ONE **/ > void create(std::vector<Base>& arr) > { > ... > } ...

Can't locate object method "ymd" via package...
Hi! I've installed DateTime and DateTime::Format::MySQL via CPAN and I get a strange error message executing this code: #!/usr/bin/perl -w use strict; use DateTime; use DateTime::Format::MySQL; my $str = "2007-08-03"; my $mySQLdate = DateTime::Format::MySQL->new; my $parsed = DateTime::Format::MySQL->format_date($mySQLdate); The error message I get is: Can't locate object method "ymd" via package "DateTime::Format::MySQL" at /usr/lib/perl5/site_perl/5.8.8/DateTime/Format/MySQL.pm line 84. Does anybody knows why I get this error messa...

Can't locate object method "new" via package
Hi all, I am finding an issue in perl v5.10.1. I am getting the following issue. I have added the path in @INC in my script. Error : Can't locate object method "new" via package Can anybody help me in this regard? Regards Pradeep # try use strict; use warnings; use FindBin; use lib $FindBin::Bin; use MyModule; .... smilesonisamal@gmail.com wrote: >Hi all, > I am finding an issue in perl v5.10.1. I am getting the following issue. >I have added the path in @INC in my script. > >Error : Can't locate object method "new" via package > >Can anybody help me in this regard? As has been customary for decades please post a small, self-contained program that exhibits the problem and that other people can run and test. jue On 20/12/13 10:33, smilesonisamal@gmail.com wrote: > Can't locate object method "new" via package This helpful error message is telling you that the package you're using doesn't have a "new" method. Well, should it? Only you can tell, since we don't know which package, or who wrote it, or how you ended up calling it. It might even be a coding error on your part. So, as J�rgen Exner suggests, why not post something which actually tells us what's going on? It's completely futile trying to help until you do, can you not see? -- Henry Law Manchester, England On 20/12/13 10:52, ...

require "mkmf" ---> can't find header files for ruby?
I am reposting my request, in case it was not seen, buried in another post: the first line of extconf.rb is require "mkmf", which is also the first line in programming ruby, ed 2 page 277. If I just run that line, I get the same error message, ruby require "mkmf" can't find header files for ruby. I am using the ruby that comes with Tiger. I did not find a ruby.h file, only an OSX-ruby.h which came in the rubycocoa installation. ...

Activestate Windows "package require uuid" doesn't work (Newbie)
() 1 % package require logger 0.8 () 2 % package require uuid can't find package uuid () 3 % Does anyone know how to set up uuid in activestate? I guess Tcllib is working ok. Note that I am not an admin -- if I was using a Linux machine and I was root, I wouldn't be quite so helpless. On Jan 22, 8:14=A0pm, "Webb S." <webb.spra...@gmail.com> wrote: > () 1 % package require logger > 0.8 > () 2 % package require uuid > can't find package uuid > () 3 % > > Does anyone know how to set up uuid in activestate? =A0I guess Tcllib is > working ok. > > Note that I am not an admin -- if I was using a Linux machine and I > was root, I wouldn't be quite so helpless. Tcllib is a collection of packages, not all of which are installed with a base ActiveTcl. Use: teacup install uuid to install the uuid package. Mark > Use: > teacup install uuid > > to install the uuid package. Bingo. In general I guess I will try teacup for a package I think should be there ? Tx "Webb S." <webb.sprague@gmail.com> writes: >> Use: >> teacup install uuid >> >> to install the uuid package. > > Bingo. > > In general I guess I will try teacup for a package I think should be > there ? Yes. Another possibility is to run teacup update This will install everything for your platform. A script I run every once in a while is > cat /home/aku/bin/teapot_update.sh #!/b...

http 2.4.5 : can't read "state(after)": no such element in array while executing "after cancel $state(after)"
Hello everyone, I set up my eggdrop a code that returns all bugs error to debugged as easily as possible. This code returns to me chque call a function of the HTTP package http.tcl 2.4.5 error: can't read "state(after)": no such element in array while executing "after cancel $state(after)" I think properly use this package calls, his would be a bug itself? How to solve this problem? What is the? Need more information? well to you. ...

Forget "Why Can't Johnny Read?" ... Why Can't Eudora Read?
I have a script which writes a MIME-formatted email containing both text and HTML. It works perfectly with all email clients with the exception of the free version of Eudora. As many of you no doubt are aware, a multipart/alternative email is constructed with two or more parts: (1) text for mail clients unable to read HTML and (2) HTML. Eudora is one of the clients which cannot read HTML. So does it read the text version of the multipart/alternative email? Of course not. It tries to read the 2nd part which is the HTML and fails ... thus displaying a table as if it were text. Eudora liter...

Instruction at "0x00FC3D70" use memory address "0x00000000". Can't be "read".
Yesterday, ALL code in python work and nothing when I close(finish) a code. Today, when I close, some raise this windows error : Instruction at "0x00FC3D70" use memory address "0x00000000". Can't be "read". Click on "OK" to exit program. Why this error, today and not before today? Askari Askari wrote: > Yesterday, ALL code in python work and nothing when I close(finish) a code. > Today, when I close, some raise this windows error : > > Instruction at "0x00FC3D70" use memory address "0x00000000". Can't be &...

YaST Package Management: "I Don't Know What I'm Doing!"
Ok, I admit. When it comes to YaST package management, I haven't a clue what I'm doing. I installed this Suse 9.2 with a iso dvd install. Then I hooked it up to my favorite ftp site, ftp.oregonstate.edu While I was futzing around with it, I clicked on something that seemed to download every package known to man, like the whole distro. Then I clicked on something that I think is deleting all those packages. But while it's deleting all these packages, I saw mod-mono go by, which I actually wanted. What does "unmanaged" mean, and I can't tell if all these ...

Web resources about - can't find package ceptcl while executing "package require ceptcl" - comp.lang.tcl

Resources last updated: 3/13/2016 11:45:52 AM