toshiba satellite pro p25 Most important is support for the Atehros wifi card (WEP)
Next, the NVIDIA graphics card
Also nice would be NTFS writing stright out of the box without
miodding the kernel
Does anyone else use this laptop? Thanks
On Sat, 26 May 2007 20:33:12 -0700, Baron Samedi wrote:
> Most important is support for the Atehros wifi card (WEP)
Any distro supports that.
> Next, the NVIDIA graphics card
Any distro supports that.
> Also nice would be NTFS writing stright out of the box without miodding
> the kernel
Any distro supports that.
> Does anyone else use this laptop? Thanks
Lost USB Reponse after Satellite Pro Recovery Hi all
Anyone share some words of wisdom on the USB front please?
Had to use recovery CD on Toshiba Satellite Pro M30 after mega virus
Now the USB ports don't recognise memory sticks - tried a couple of
different known good sticks to be sure.
Strangely the USB mouse works no problem.
Is this a USB 2 issue?
Anyone know of a fix please - I googled and found something on USB enabling
in the BIOS, but there is no entry for USB that I can see.
Lappy is running WinXP.
The first thing I would check is whether the driver for the usb is loaded.
Satellite Pro 445CDT needs Ethernet card? Hi all,
I need to get an Ethernet card for my 445CDT.
It can be just 10MBs but a 10/100 card would
be nice. The laptop has W98SE on it.
"***** charles" <email@example.com> wrote in message
> Hi all,
> I need to get an Ethernet card for my 445CDT.
> It can be just 10MBs but a 10/100 card would
> be nice. The laptop has W98SE on it.
> any suggestions?
Well, I found a Belkin card. I hope it works. Seems like
a lot of drivers are installe...
Toshiba Satellite Pro A100 heat problems. I've had heat problems from day one and I've known the reason for this
since day one, but now it's getting out of hand.
The problem is toshibas software which controls the fan, at least i
think so. The thing is that the fan RPM is too low and only when the
computer gets to the point of no return, that is a shutdown due to
heat is waiting just round the corner, the RPM goes up, but of couse
at that time it's too late and the computer shut down.
So, what im saying is that the fan only really does anything to cool
the computer when the cpu gets close too or above a 100 centrigrad...
RAM Upgrade: Toshiba Satellite Pro 4600 I added a second 128MB SODIMM to the empty slot in a friend's 4600 and the
system did not see it. I switched the modules over and still only got
128MB reported for system RAM so I think that the second slot may be dead -
have I missed something? I will be taking a look at the machine tomorrow
and I have discovered that on another (earlier) Toshiba model, you have to
use Fn + F3 repeatedly to enter Boot mode before powering down and
installing extra memory - does anybody know if that procedure should be
applied on the 4600? The documentation that came with the machine did no...
Toshiba Satellite Pro 4600 CD boot problem Hi.
I've problem with my notebook. When i'm trying to boot it from cd it doesn't
work. I've downloaded the newest BIOS (2.6) and still nothing has changed. I
don't know what happend, so that he stopped working. Have you got any ideas
how to correct this issue? In addition i'd say, that the boot seqence is
I don't know if it would help, but my OS is WinXP + SP2. And boot device is
PS. Feel free to correct my english ;)
Mike Richter, were you born with
Satellite Pro 4270 Only boots when reset is pressed lots of times. PLease help.
My Toshiba SP4270 will NOT power up correctly, unless i keep pressing the reset button many times.
There is NO sequence to how many time I have to press it.
When I poer on the system the following happens:-
CD light flashes.
Hard disk spins.
Monitor panel does NOT get power, and the soundcard does NOT give the usual soft click when loading.
I am running Windows XP SP1.
396Mb genuine Tosh Memory
tried different hdds. (original - 6gb - 10gb and new 20gb IBM travelstar)
Upgraded the BIOS from www.toshiba-tro.de
these symptoms do NOT appear if I power up and press F12 (for upgrading...
changing the settings of temp control on a Toshiba Satellite Pro 6100? Recently I already mentioned in this NG the problems with an
overheating HDD on a Toshiba Satellite Pro 6100.
Now I made an interesting observation:
On *very rare* occasions the booting process stops somewhere in the
middle and the ventilator starts running fast. When I then reboot the
computer works fine. But in those rare cases the ventilator kicks in
again at the reboot when the machine is still cold and it keeps
running fast. It's much noisier then as normal, but the temperature of
the CPU and the HDD stays almost 10� Centigrade cooler than at other
times. - The operation of the vent ...
ZoneAlarm Pro and NoteTab Pro interact to malfunction. My NoteTab Pro window is suddenly "always on top" when the ZoneAlarm
firewall is running. That is, with multiple programs running, their
windows are under NoteTab. Without ZoneAlarm loaded, NoteTab runs ok.
ZoneAlarm cannot be shut down while NoteTab is loaded. Otherwias it
appears to be ok.
NoteTab Pro 4.95/np full version
ZoneAlarm Pro 4.5.594
I have run Ad-aware and F-Prot antivirus, Spybot S & D.
Could it be electronic warfare. It happened immediately as I posted a
message on aljazeera.com that was critical of one of their editorials.
Sincerely, Stan Hilliard
Mapping Network Drive on w2k pro to wxp pro problem I am having a bit of a problem mapping a network drive. here is all the
================ Workgroup Info ==============================
I have two computers: a Windows XP Pro and a Windows 2000 Pro
computer1 name: Rix (wxp pro)
computer2 name: Tri (w2k pro)
workgroup name: WORKGROUP
============== Physical Layout ================================
I also have a router called: Fireway
both computers are connected to this Fireway. The router is then
connected to my cable modem.
==================== TCP / IP Info ============================
Fireway is serves as the DHCP server with ip add...
Problem mapping network drive from w2k pro to wxp pro I am having a bit of a problem mapping a network drive. Here are the
I have two computers: a Windows XP Pro [Rix] and a Windows 2000 Pro
workgroup name: WORKGROUP
I have defined a user (Tony) with administrative privileges on both Rix
and Trix. Yes they both have the same name and password.
I also have a router called Fireway. Both computers are connected to
this Fireway. The router is then connected to my cable modem.
Fireway serves as the DHCP server with ip address 192.168.0.10
Rix has the ip address 192.168.0.20
Trix has th...
Troubles using WS_FTP Pro with Zone Alarm Pro under XP [This followup was posted to comp.security.firewalls and a copy was sent
to the cited author.]
Just rebuilt my machine (i.e., low-level formats on all SCSI drives,
complete new, clean install of OS and all apps) and now seem to have
trouble accessing FTP sites using WS_FTP Pro v9.01 with Zone Alarm Pro
active (v5.5.062) active.
NOTE: I have installed XP's SP2 but have turned off its firewall.
The trouble is that for all sights connecting takes very long, and on
one site inparticular, once connected I cannot see any files or
directories (I know I'm connected b/c I can ...
RE: EE?Pro / EEPro / EE Pro: for HP 49 Has anyone seen EEPro for the 49g+ yet? GaaK's version was great, but
I've yet to see "the real thing"
Someone was saying that they had some great version a long time ago....
XP pro can't ping another XP pro BUT..... I have 2 Windows XP Pro desktop PC's
both get an IP from my Dlink DI-624 router via DHCP
both have identical protocols and services installed (TCP/IP and NWlink/IPX)
both have the windows firewall disabled (not running any other firewall)
both on the same subnet
IP's are 192.168.0.102 and 192.168.0.104
both PC's connect to the internet via NAT just fine through the same router.
PC #1 can ping PC #2 but PC #2 CANNOT ping PC #1.
PC #1 can remote desktop into PC #2 but PC #2 CANNOT remote desktop to
PC #1 can see PC #2 in network neighborhood and can connect to it.
PC #2 can ...
"ROBOTS.PRO" domain name auction on EBay *now* (http://robots.pro) The domain name "robots.pro" is currently up for auction on EBay.
Only eight days left in the auction. Starting bid is $50.
See auction for details.
To visit auction, or place bid, go to EBay and search for robots.pro
(or just visit http://robots.pro, which redirects to the EBay
Robots.pro is obviously a very rare premium domain name for
the robotics field and would be a great online asset for someone
in the business or for someone planning to be. It's also a good
website for showcasing robot-related projects.
NOTE: For more information about the .PRO extentions, ...
Vienna Symphonic Orchestra Pro Performance ( VSL ), EXS24, 27 DVDs, and Vienna Symphonic Orchestra Pro Performance ( VSL ), GIGA, 43 DVDs Vienna Symphonic Orchestra Pro Performance ( VSL ), EXS24, 27 DVDs, and
Vienna Symphonic Orchestra Pro Performance ( VSL ), GIGA, 43 DVDs
EE*Pro Back in February I inquired about the EE*Pro that Brian Maguire was
supposed have finished back in October of 2005. Has anyone heard when
this will be avaliable? I had tried Gaak's EMU48 version and I would
like to have it for my 49G+ and 50G.
> Back in February I inquired about the EE*Pro that Brian Maguire was
> supposed have finished back in October of 2005.`
I asked this question several times around that time and since then and
have reiceved no reply.
My take on the situation is that Brian Maguire's product is Vaporwar...
wirescope pro hi, any one ever used the newly release wirescope pro? just bought one
myself, operate easily, but can't find any support page from agilent,
wonder how i'm going to upgrade the unit.!!!! byw, can't find a link
for me to register this unit too!!!
"weiwoo" <firstname.lastname@example.org> wrote in message
> hi, any one ever used the newly release wirescope pro? just bought one
> myself, operate easily, but can't find any support page from agilent,
> wonder how i'm going to upgrade the unit.!!!! ...
Fireworkz Pro Some help please, I have a cell set up in Fireworkz Pro with 631 in the
cell, what I'm trying to do is work out the cost of my Electricity Bill.
I already have one working out my Bill now, but Epower have stop the fix
Charges and now made the first 182 units at 9.88 and the rest of the units
at 6.45 now.
So how would I calculate for the first 182 units at 9.88 then at 6.45 for
the 449 what is left.
I have been trying to do it with LookUp and work on the first 182 then
count the rest what is left but cannot get my head round on how this will
can some kind person tell me how, if po...