f



Problem Using Sendmail 8.13.3 with BerkeleyDB.4.3 #2

Hello,

I am using RedHat release 9 of Linux on a Dell Dimension 2400 box.
I want to install Sendmail 8.13.3 for use as a mail server

First, I downloaded and installed BerkeleyDB.4.3
Then I built and installed Sendmail.

But, when I run the 'newaliases' command or try to run the Sendmail
executable, I get the error message :

"error while loading shared libraries : libdb-4.3.so
cannot open shared object file.
No such file or directory.

I have checked the directory /usr/local/BerkeleyDB.4.3/lib
and there IS a libdb.4.3.so executable there.

Could I please get some pointers from the list ?

Thanks

Dave Harman

0
dharman (14)
2/28/2005 1:01:29 AM
comp.mail.sendmail 13518 articles. 1 followers. jfretby (35) is leader. Post Follow

0 Replies
907 Views

Similar Articles

[PageSpeed] 10

Reply:

Similar Artilces:

Problem Using Sendmail 8.13.3 with BerkeleyDB.4.3
Hello, I am using RedHat release 9 of Linux on a Dell Dimension 2400 box. I want to install Sendmail 8.13.3 for use as a mail server First, I downloaded and installed BerkeleyDB.4.3 Then I built and installed Sendmail. But, when I run the 'newaliases' command or try to run the Sendmail executable, I get the error message : "error while loading shared libraries : libdb-4.3.so cannot open shared object file. No such file or directory. I have checked the directory /usr/local/BerkeleyDB.4.3/lib and there IS a libdb.4.3.so executable there. Could I please get some pointers from the list ? Thanks Dave Harman On Sun, 27 Feb 2005 16:26:00 -0800 OCDave wrote: > I am using RedHat release 9 of Linux on a Dell Dimension 2400 box. > I want to install Sendmail 8.13.3 for use as a mail server > > First, I downloaded and installed BerkeleyDB.4.3 > Then I built and installed Sendmail. > > But, when I run the 'newaliases' command or try to run the Sendmail > executable, I get the error message : > > "error while loading shared libraries : libdb-4.3.so > cannot open shared object file. > No such file or directory. > > I have checked the directory /usr/local/BerkeleyDB.4.3/lib > and there IS a libdb.4.3.so executable there. That is no standard search path. Add it to /etc/ld.so.conf and run ldconfig. > Dave Harman Alexander -- Alexander Dalloz | Enger, Germany | GPG http://pgp.mit.edu 0xB366A773 legal...

Compiling sendmail 8.13.3 on BSD/OS 4.3.1
I am trying to compile sendmail using GCC 3.2.2 but cc 2.95 keeps getting in the way. How do I tell sendmail to completely ignore cc 2.95.X? -- Member - Liberal International This is doctor@nl2k.ab.ca Ici doctor@nl2k.ab.ca God Queen and country! Beware Anti-Christ rising! ...

FYI: Integration of sendmail-8.13 and cyrus-2.3.3+ IMAP server
Real Time Sendmail and Cyrus Integration Version 2 http://anfi.homeunix.net/sendmail/rtcyrus2.html The above link leads to recipe how to integrate sendmail-8.13 and cyrus-2.2.3+ (the latest is cyrus-2.2.6) using socket map. [Making sendmail 8.12 support socket map requires patching the sources.] The recipe allows sendmail to reject messages to non existing cyrus mailboxes in responce to "RCPT TO:" without taking responsibility for sending bounce messages for non existing mailboxes. -- Andrzej [en:Andrew] Adam Filip anfi@priv.onet.pl anfi@xl.wp.pl http://anfi.homeunix.net/ htt...

problem sendmail sendmail-8.13.8 , aliases and LDAP #2
Hi guys , Im trying to connect my sendmail to my LDAP. In fact in my ldap i the following field mailLocalAddress with the e- mail of the employee ( john.dupont@mycompanie.com ) le in an other field i have rfc822MailMember which is jdupont@server1.mycompanie.com (where jdupont is the account of my employee for the server1). Now I d like to set up a sendmail server that can translate the e-mail to the rfc822MailMember address. Here is my following configuration : site.config.m4 dnl #compilation de sendmail avec support ldapdnl APPENDDEF(`confMAPDEF', `-DLDAPMAP') APPENDDEF(`confINCDIRS', `-I/apps/openldap-2.1.30/include') APPENDDEF(`confLIBSDIRS', `-L/apps/openldap-2.1.30/lib') APPENDDEF(`confLIBS', `-lldap -llber') sendmail.mc define(`confLDAP_DEFAULT_SPEC',`-h myldap.mycompanie.com ')dnl define(`ALIAS_FILE', `/etc/mail/aliases, ldap:-k "(&(objectClass=inetLocalMailRecipient)(mailLocalAddress=%0))" -d "cn=bindcn,ou=sec,dc=mycompanie,dc=fr" -P "/etc/mail/ldapconnect" -M LDAP_AUTH_SIMPLE -b "dc=mycompanie,dc=fr" -v "rfc822MailMember" ')dnl so when i try to send and e mail to john.dupont with my e-amil client i have the following error "Error 5.1.1 john.dupont@mycompanie.com User unknow. I ve the following log john.dupont@mycompanie.com ... User unknown And i my ldap server i ve the following log Feb 5 13:57:59 ldapserver slapd[7702]: conn=30283 fd=27 ACC...

Sendmail problem in AIX 4.3.3
Hi After upgraded sendmail 8.8 to 8.12.9 it's stopped working. I am using AIX 4.3.3 with latest Fixes. DNS is configured in my box. Please help me. Also want to know is there any way to use sendmail without using nameresolver. Thanks in advance Chiku -- Posted via http://dbforums.com Khee-Seng Yeo <kyeo@nyx.net> wrote in message news:<1058453840.726970@irys.nyx.net>... > Terry Polzin <t_polzin@yahoo.com> wrote: > : subhasbothra <member33505@dbforums.com> wrote in message news:<3120641.1058430831@dbforums.com>... > : > After upgraded sendmail ...

Problem using crosstool for powerpc-750 and gcc-3.3.2-glibc-2.3.2
Hi everybody, I wanted to build the gcc compiler 3.3.2 with glib-2.3.2 for powerpc-750 and used Dan's crosstool-0.43. After modifiying the "demo- powerpc-750.sh" script using TARBALLS_DIR=/home/stephan/downloads RESULT_TOP=/home/stephan/opt/crosstool export TARBALLS_DIR RESULT_TOP GCC_LANGUAGES="c,c++" [...] eval `cat powerpc-750.dat gcc-3.3.2-glibc-2.3.2.dat` sh all.sh -- notest I got a bunch of errors cc1: error: unrecognized command line option "-mnew-mnemonics". At the end the compilation completely failed with ...

Problems compiling programs using wxWindows 2.2.9 using GCC-3.2.3
PLATFORM: Windows XP COMPILER: g++ Version 3.2.3 wxWINDOWS VERSION: wxWindows 2.2.9 Hi: I have successfully compiled wxWindows 2.2.9 on MinGW-3.0.0-rc4 [GCC Version 3.2.3] after commenting out the compilation of dynlib.cpp and fontenum.cpp (error at line 155) in the makefile.g95. The 2 source files were causing compilation errors which caused make to exit with an errnum of 1. My problem is this. A sample "Hello, World!" program - basic.cpp - fails during linking: C:\myzz>make 2>err g++ --pipe -c -D_X86_=1 -DWIN32 -D_WIN32 -DWINVER=0x0400 -D__WIN95__ -D__...

Sendmail problems after upgrade from 8.11.1 -> 8.13.3
Hi everyone I have upgrade our sendmail from version 8.11.1 to 8.13.3. After that I am facing problems with some incoming mails. We are using special mailer called Mail Gateway (mgw). It should get all incoming mails addressed like this: <what_ever_number_token@mgw.mydomain.com> (for example the address can be: 12345@mgw.myhost.com) should be routed to port 1234 from where mgw gets the mail. My configuration works just fine with old 8.11.1 but with the 8.13.3 I always get "sender unknown" error when trying to send mail to this mailer from another server where sendmail is running. However, if I send mail from localhost, it works ok and mail is forwarded to correct mailer. In sendmail.cf I have as following settings for the mailer, here is shown only mgw related parts of the config: ------clip------------------------ ################################################################### ### Ruleset 98 -- local part of ruleset zero (can be null) ### ################################################################### SParseLocal=98 # This map matches local-parts of RFC2822 addresses conforming to numeric addresses # accepted by Mail Gateway Receiver Kmgw_address regex -m -a/TYPE=MGW ^\+*[0-9]+$ R$+ <@ mgw. $=w .> $@ $(mgw_address $1 $) @ $2 R$+ <@ mgw. $=w > $@ $(mgw_address $1 $) @ $2 R$+ /type=mgw<@ $=w .> $#mgw$@$R1200$:$1 @mgw.$2 R$+ /type=mgw<@ $=w > $#mgw$@$R1200$:$1 @mgw.$2 ###############################...

sendmail 8.13.4 451 4.3.0 Temporary system failure
Hello, after changing to the new sendmail realease 8.13.4 the server quits all mail with the message "451 4.3.0 Temporay system failure. Try again later" /var/log/mail.log -------------------------------- schnipp Jan 16 11:36:27 localhost sm-msp-queue[15535]: k0F1e1W2003364: to=root, delay=1+08:56:26, xdelay=00:00:00, mailer=relay, pri=10651759, relay=[10.10.101.111], dsn=4.0.0, stat=Deferred: 451 4.3.0 Temporary system failure. Please try again later. Jan 16 11:36:27 localhost sm-msp-queue[15535]: k0ELYGQk004315: to=root, ctladdr=root (0/0), delay=1+13:02:11, xdelay=00:00:00, mailer=relay, pri=11910443, relay=[10.10.101.111], dsn=4.0.0, stat=Deferred: 451 4.3.0 Temporary system failure. Please try again later. /var/log/mail.log---------------------------------schnipp /etc/mail/submit.mc------------------------------schnipp divert(0)dnl # # Copyright (c) 2000-2002 Richard Nelson. All Rights Reserved. # # This file is used to configure Sendmail for use with Debian systems. # define(`_USE_ETC_MAIL_')dnl include(`/usr/share/sendmail/cf/m4/cf.m4')dnl VERSIONID(`$Id: submit.mc, v 8.13.4-3 2005-06-03 16:49:22 cowboy Exp $') OSTYPE(`debian')dnl DOMAIN(`debian-msp')dnl dnl # dnl #--------------------------------------------------------------------- dnl # Masquerading information, if needed, should go here dnl # You likely will not need this, as the MTA will do it dnl #--------------------------------------------------------------------- dnl MASQUE...

Newbie question; why (cons (list 1 2) (list 3 4)) is ((1 2) 3 4) and not ((1 2) (3 4))
Hi, I just started to learn LISP, and stumbled in SICP upon (cons (list 1 2) (list 3 4)) is evaluated to ((1 2) 3 4) I do not understand why this is not: ((1 2) (3 4)) because (cdr (cons (list 1 2) (list 3 4))) is (3 4) and (car (cons (list 1 2) (list 3 4))) is (1 2) Is there a logical explanation? Thank you for your patience. -- Greg Out of order, gregor <gregor@ediwo.com> writes: > Is there a logical explanation? Yes. > I just started to learn LISP, and stumbled in SICP upon But first, let's talk about LISP, Lisp, Scheme and Common Lisp. LISP is the name of the programming language invented in 1959 by John McCarthy and of the first program implementing it written amongst other by Steve Russel, one of his students. LISP 1.5 is a segueing version of that same program dating about 1962 that had some distribution. Then various lisp languages were developed at various places by various teams. Names such as MacLisp, InterLisp, LeLisp, StandardLisp, vLisp, Lisp Machine Lisp, Scheme, GNU Emacs Lisp, etc. It was quite a mess, and people had a hard time sharing programs. So they talked and designed and wrote and voted and produced the ANSI Common Lisp standard (in the USA), meanwhile in Europe they produced the ISO Lisp standard. Nowadays, almost all the other lisps are "dead", with only scheme (current version r5rs, r7r...

problem in wxMac 2.6.2 unicode mach-o build using Codewarrior 8.3 on Mac OS 10.3
Hi, I am getting the following error while compiling wxMac 2.6.2, wxLib Mach-o(debug/release) build with wxUSE_UNICODE flag set to 1 I am using Codewarrior 8.3 on Mac OS 10.3 Error : type mismatch 'wxMBConvUTF16BE' and 'wxMBConv' dobjcmn.cpp line 283 return format == wxDF_UNICODETEXT ? sUTF16Converter : (wxMBConv&) wxConvLocal; Can someone throw some light on this issue and let me know whether it is a wxMac issue or i am making some mistake in setting the flags for unicode build. Any suggestions or workaround will be highly appreciated. The only cha...

Compiling sendmail 8.13.6 on NextStep 3.3
Greetings, I'm having some problems compiling sendmail version 8.13.6 on an old NextStep box, with an old compiler. I keep getting sm_abort/sm_abort_at errors. I even tried to remove the sm_abort references in assert.c, but then the build complained about "Undefined sybols". Can anyone help? Anyone have a NeXT box anymore, or gcc v2.5.8? :) Thank you, Eric B. uname -a NeXTSTEP XXXXXXXXX 3.3 ? I386(Intel486) cc -v Reading specs from /lib/i386/specs NeXT Computer, Inc. version cc-437.2.6, gcc version 2.5.8 cd sendmail-8.13.6/ ../Build Making all in: src/sendmail-8.13.6/libsm Configuration: pfx=, os=NeXT, rel=3.3, rbase=3, rroot=3.3, arch=I386, sfx=, variant=optimized Using M4=/usr/local/bin/m4 Creating src/sendmail-8.13.6/obj.NeXT.3.3.I386/libsm using src/sendmail-8.13.6/devtools/OS/NeXT.3.x Making dependencies in src/sendmail-8.13.6/obj.NeXT.3.3.I386/libsm Making in src/sendmail-8.13.6/obj.NeXT.3.3.I386/libsm rm -f sm_os.h ln -f -s ../../include/sm/os/sm_os_next.h sm_os.h cc -O -I. -I../../include -DNDBM -DNIS -DNETINFO -DNeXT -Wno-precomp -pipe -posix -c assert.c assert.c:130: illegal external declaration, missing `;' after `SM_DEAD_D' assert.c:132: illegal external declaration, missing `;' after `,' assert.c:142: syntax error, found `=' assert.c:142: illegal external declaration, missing `;' after `*' assert.c:145: illegal external declaration, missing `;' after `*' a...

Problems using qtool with sendmail 8.13.4
I recently started to use qtool to manage the ever growing number of bounce messages our mail system is generating. I set up a seperate queue to which I move messages from Mailer-Daemon e.g. qtool.pl -e '$msg{sender} =~ /mailer-daemon/i' /var/spool/mailerd /var/spool/mqueue Sometimes when I run this command, I get a message: There is already a queued message with id 'j44MjNjx016167' in '/var/spool/mailerd'. Looking in both queues shows this to be correct The files, both qf and df, are different but do refer to the same message - they have the same Message-ID. This sounds like file locking is not working properly. Were there any changes to sendmail 8.13.4 that would affect how qtool works? The OS is Redhat 7.3 with kernel 2.4.24 Regards Geoff Steer "Geoff Steer" <gsteer@firstwave.com.au> wrote in news:pan.2005.05.05.05.11.00.805499@firstwave.com.au: > I recently started to use qtool to manage the ever growing number > of bounce messages our mail system is generating. > > I set up a seperate queue to which I move messages from Mailer-Daemon > e.g. > > qtool.pl -e '$msg{sender} =~ /mailer-daemon/i' /var/spool/mailerd > /var/spool/mqueue > > Sometimes when I run this command, I get a message: > > There is already a queued message with id 'j44MjNjx016167' in > '/var/spool/mailerd'. > > Looking in both queues shows this to be correct The files, both qf and...

Sendmail 8.13.4 and AIX 5.3
I just set up an AIX 5.3 system and I'm trying to install sendmail 8.13.4. So far its been a non-starter. Before I go crazy, I noticed that there doesn't seem to be an OSTYPE for AIX 5.3. Can sendmail 8.13.4 run on AIX 5.3 yet? If its not an AIC 5.3 issue.... Its been awhile since I've installed sendmail from scratch, can anyone give me a pointer or two? wrote: > I just set up an AIX 5.3 system and I'm trying to install sendmail > 8.13.4. So far its been a non-starter. Before I go crazy, I noticed > that there doesn't seem to be an OSTYPE for AIX 5.3. Can sendmail > 8.13.4 run on AIX 5.3 yet? AFAIK: yes. Some fixes for 64 bit mode etc went into 8.13.4 as you can see in the release notes. Maybe you can share the error(s) you encountered? -- Note: please read the netiquette before posting. I will almost never reply to top-postings which include a full copy of the previous article(s) at the end because it's annoying, shows that the poster is too lazy to trim his article, and it's wasting my time. I go into the source top directory, type "Build" and here is what I get. (Hope its readable.) Thanks Making all in: /usr/local/src/sendmail-8.13.4/libsm Configuration: pfx=, os=AIX, rel=5.3.0, rbase=5, rroot=5.3, arch=PPC, sfx=, vari ant=optimized Making in /usr/local/src/sendmail-8.13.4/obj.AIX.5.3.0.PPC/libsm cc -g -I. -I../../include -DNDBM -DNIS -D_AIX3 -c debug.c "../../include/sm/conf.h", line 2696...

Problem of php_ldap.dll in appserv 2.4.3 and Problem of Apache server in appserv 2.5.3
when I used appserv-win32-2.4.3, everything is ok, but there is no ldap related functions support, I uncommented extension=php_ldap.dll in c:\winnt\php.ini, and thought everything will be allright, but I found there is no php_ldap.dll in $appserv\php\extensions\ or $appserv\php\ext\. Then I took php_ldap.dll of Appserv-win32-2.5.3 and tried to use it, but it is not work, so I reinstalled appserv-win32-2.5.3, but there is no response when I use http://localhost, http://localhost/test1.php is also no response, but under command line, I executed d:\>php test1.php works. How can I solve this problem? Thanks in advanced. -jiing- ...

problem sendmail sendmail-8.13.8 , aliases and LDAP
Hi guys , Im trying to connect my sendmail to my LDAP. In fact in my ldap i the following field mailLocalAddress with the e- mail of the employee ( john.dupont@mycompanie.com ) le in an other field i have rfc822MailMember which is jdupont@server1.mycompanie.com (where jdupont is the account of my employee for the server1). Now I d like to set up a sendmail server that can translate the e-mail to the rfc822MailMember address. Here is my following configuration : site.config.m4 dnl #compilation de sendmail avec support ldapdnl APPENDDEF(`confMAPDEF', `-DLDAPMAP') APPENDDEF(`confINCDIRS', `-I/apps/openldap-2.1.30/include') APPENDDEF(`confLIBSDIRS', `-L/apps/openldap-2.1.30/lib') APPENDDEF(`confLIBS', `-lldap -llber') sendmail.mc define(`confLDAP_DEFAULT_SPEC',`-h myldap.mycompanie.com ')dnl define(`ALIAS_FILE', `/etc/mail/aliases, ldap:-k "(&(objectClass=inetLocalMailRecipient)(mailLocalAddress=%0))" -d "cn=bindcn,ou=sec,dc=mycompanie,dc=fr" -P "/etc/mail/ldapconnect" -M LDAP_AUTH_SIMPLE -b "dc=mycompanie,dc=fr" -v "rfc822MailMember" ')dnl so when i try to send and e mail to john.dupont with my e-amil client i have the following error "Error 5.1.1 john.dupont@mycompanie.com User unknow. I ve the following log john.dupont@mycompanie.com ... User unknown And i my ldap server i ve the following log Feb 5 13:57:59 ldapserver slapd[7702]: conn=30283 fd=27 ACC...

Sendmail 8.14.3 not sendmail hugely attached e-mail files in a timely manner
What could be the problem. They seem stuck and I have to run sendmail -v -q manually just to get them to propogate. Any reason why? -- Member - Liberal International This is doctor@nl2k.ab.ca Ici doctor@nl2k.ab.ca God, Queen and country! Beware Anti-Christ rising! Never Satan President Republic! If you cannot lead a family how can you pastor a church? The Doctor unleashed the infinite monkeys on 21/05/2009 00:07 producing: > What could be the problem. > > They seem stuck and I have to run sendmail -v -q manually just > to get them to propogate. > > Any reason why? With so little information, it's impossible to help you. How do you define "huge"? How long do you wait? What's in your mail logs? -- Rob MacGregor (BOFH) Rule 37: "There is no 'overkill'. There is only 'open fire' and 'I need to reload.'" ...

problem with KDE 3.4 and QT 3.3.4
Hello, I have recently felt the need for a specific application under KDE and decided to install it on one of our machines at work. I can't access this NG from work so I'll try to be as precise as I can but I might forget something. OK, here is my problem. I needed to install the new version of QT, but I still needed to preserve the one installed on our network (/usr/local is actually a symbolic link to a directory where all our machines access). For that I created a new "/usr/local.org" (this one being physically on my machine) and compiled QT 3.3.4 in /usr/local.org/qtXXXXXX and added a symbolic "qt" in the same directory for the convienience. I changed all my $QTDIR and $LD_LIBRARY_PATH and so.I was able to compile the examples and play with it. Then, I used apt-get to install kdelibs, and kde. The installation is a success, I restart my X-org, and can start KDE 3.4 (great !!). However, when I try to compile a simple program (such as Kbiff), the configure file tells me that I have a problem with UIC. I've looked on the net for a solution and found many references (sometimes several year old) and they said that the kdelibs needed to be recompile with the new QT installation. So I check the libraries of KDE and in fact the path used for the QT directory is still the one on the network (/usr/local/XXX/qt). Bingo ! I tried to reinstall kdelibs after I installed QT 3.3.4, and still no changes...) Is there a way of specifying the QT direc...

Problem with compiling sendmail 8.13.3 on AIX 5.1
Hello all! I cannot compile sendmail 8.13.3 on my AIX 5.1 (Maintenance Level 7). I am using gcc compiler (gcc version 2.95.2 19991024 (release)). When I run "sh Bulid", I get these messages: ----------------------------------------------------------------------- smtp1:/install/sendmail-8.13.3>sh Build Making all in: /install/sendmail-8.13.3/libsm Configuration: pfx=, os=AIX, rel=5.1.0, rbase=5, rroot=5.1, arch=PPC, sfx=, variant=optimized Using M4=/usr/bin/m4 Creating /install/sendmail-8.13.3/obj.AIX.5.1.0.PPC/libsm using /install/sendmail-8.13.3/devtools/OS/AIX.5.1 Including /install/sendmail-8.13.3/devtools/Site/site.config.m4 Making dependencies in /install/sendmail-8.13.3/obj.AIX.5.1.0.PPC/libsm rm -f sm_os.h ln -f -s ../../include/sm/os/sm_os_aix.h sm_os.h for i in assert.c debug.c errstring.c exc.c heap.c match.c rpool.c strdup.c strerror.c strl.c clrerr.c fclose.c feof.c ferror.c fflush.c fget.c fpos.c findfp.c flags.c fopen.c fprintf.c fpurge.c fput.c fread.c fscanf.c fseek.c fvwrite.c fwalk.c fwrite.c get.c makebuf.c put.c refill.c rewind.c setvbuf.c smstdio.c snprintf.c sscanf.c stdio.c strio.c ungetc.c vasprintf.c vfprintf.c vfscanf.c vprintf.c vsnprintf.c wbuf.c wsetup.c string.c stringf.c xtrap.c strto.c test.c path.c strcasecmp.c strrevcmp.c signal.c clock.c config.c shm.c mbdb.c strexit.c cf.c ldap.c niprop.c mpeix.c t-event.c t-exc.c t-rpool.c t-string.c t-smstdio.c t-match.c t-strio.c t-heap.c t-fopen.c t-strl.c t-strrev...

Possible to block mail from SMTPs whose IPs are in 12345678 form? (not 1.2.3.4 or host [1.2.3.4] )
Hello. I started getting some spam on my network (its basically always the same crap - some "doctor" soliciting some drugs...) and I've been adding entries to my /etc/mail/access file (and re hashing it of course)... But recently, in the mail source, the "received from" lines have been showing a number, like 123456789, instead of a traditional ip (1.2.3.4), for the SMTP that relayed the email to me, and I'm wondering if it's possible, and a good idea (or RFC legal) to block IP's that aren't either in a.b.c.d or "hostname [a.b.c.d]" form. I've never encountered an IP in single 32bit numerical form on any non spam email, so it doesn't seem it would be a problem. Or is there a better way to get rid of this spammer without endlessly putting new ip blocks, must of which are overseas (mostly asian - china, korea, etc) ip blocks in my access db (REJECT.) I know spammers can sometimes spoof the domain they are really sending from, it would be nice to finally kill this one once and for all (short of changing my domain name.) [One little note, I do have my sendmail checking with online blacklists too, which filters out a lotta crap as well, but this spammer has a different from header (surprise surprise) as well as recovered from addresses. I'm currently using njabl.org, if there is a better one I'd gladly use it instead, or in conjunction - can't ever have too many anti spam tools :-) ] -- S...

[RELEASED] Second release candidates for Python 2.6.8, 2.7.3, 3.1.5, and 3.2.3
We're chuffed to announce the immediate availability of the second release candidates for Python 2.6.8, 2.7.3, 3.1.5, and 3.2.3. The only change from the first release candidates is the patching of an additional security hole. The security issue fixed in the second release candidates is in the expat XML parsing library. expat had the same hash security issue detailed below as Python's core types. The hashing algorithm used in the expat library is now randomized. A more thorough explanation of the "hash attack" security hole follows. The main impetus for these releases is fi...

[RELEASED] Second release candidates for Python 2.6.8, 2.7.3, 3.1.5, and 3.2.3
We're chuffed to announce the immediate availability of the second release candidates for Python 2.6.8, 2.7.3, 3.1.5, and 3.2.3. The only change from the first release candidates is the patching of an additional security hole. The security issue fixed in the second release candidates is in the expat XML parsing library. expat had the same hash security issue detailed below as Python's core types. The hashing algorithm used in the expat library is now randomized. A more thorough explanation of the "hash attack" security hole follows. The main impetus for these releases is fixing a security issue in Python's hash based types, dict and set, as described below. Python 2.7.3 and 3.2.3 include the security patch and the normal set of bug fixes. Since Python 2.6 and 3.1 are maintained only for security issues, 2.6.8 and 3.1.5 contain only various security patches. The security issue exploits Python's dict and set implementations. Carefully crafted input can lead to extremely long computation times and denials of service. [1] Python dict and set types use hash tables to provide amortized constant time operations. Hash tables require a well-distributed hash function to spread data evenly across the hash table. The security issue is that an attacker could compute thousands of keys with colliding hashes; this causes quadratic algorithmic complexity when the hash table is constructed. To alleviate the problem, the new releases add rando...

FreeBSD-5.3 sendmail-8.13.5 Build/Compile problems
Hello I'm using sendmail-8.13.5 with FreeBSD 5.3 (i386 on a PC). Following various docs, the READMEs, Bryan Costales sendmail "bat book", Craig Hunt's sendmail cookbook, etc, I'm trying to Build/configure sendmail starting out with the generic-bsd4.4.mc file which comes with the distribution. Logged in as root, if I copy the generic-bsd4.4.mc file into the devtools/Site directory and rename as site.config.m4 I can cd to /usr/local/src/sendmail-8.13.5 and run './Build -c' and it all runs fine, but I need to make some changes to configure sendmail for my site. The generic-bsd4.4.mc file contains (omitting commented lines): divert(-1) divert(0)dnl VERSIONID(`$Id: generic-bsd4.4.mc,v 8.10 1999/02/07 07:26:02 gshapiro Exp $') OSTYPE(bsd4.4)dnl DOMAIN(generic)dnl MAILER(local)dnl MAILER(smtp)dnl To use the file 'local-host-names' in /etc/mail I change the generic to: divert(-1) divert(0)dnl VERSIONID(`$Id: generic-bsd4.4.mc,v 8.10 1999/02/07 07:26:02 gshapiro Exp $') OSTYPE(bsd4.4)dnl DOMAIN(generic)dnl FEATURE(use_cw_file)dnl MAILER(local)dnl MAILER(smtp)dnl - i.e. adding the one line 'FEATURE(use_cw_file)dnl' When I run './Build -c' with that one change I get: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Making all in: /usr/local/src/sendmail-8.13.5/libsm Configuration: pfx=, os=FreeBSD, rel=5.3-RELEASE, rbase=5, rroot=5.3-RELEASE, arch=i386, sfx=, variant=optimized Clearing out existing /usr/local/src/sendmail-8.13.5/obj...

[wx 2.4.2.4, gcc 3.3.3] Creating an wxApp from a non-wxWidgets program
--Boundary-02=_/rkfAd91uo66+N6 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Description: signed data Content-Disposition: inline Hi all, I'm trying to create a GUI for a previously non-wxWidgets oriented C++=20 program, and I'm having some problems. I have quite experience with wxPytho= n=20 and Boa-constructor, but now I have to do it in "plain" C. The question is that I have my main() function and want to create a wxApp=20 derived object, so I can't simply do an IMPLEMENT_APP(myApp). Inste...

Web resources about - Problem Using Sendmail 8.13.3 with BerkeleyDB.4.3 #2 - comp.mail.sendmail

Berkeley DB - Wikipedia, the free encyclopedia
6.0.20 / June 10, 2013 ; 14 months ago ( 2013-06-10 ) Berkeley DB (BDB) is a software library that provides a high-performance embedded database ...

Howard Chu (@hyc_symas) on Twitter
Sign in Sign up To bring you Twitter, we and our partners use cookies on our and other websites. Cookies help personalize Twitter content, tailor ...

Margo Seltzer (Aaron Swartz's Raw Thought)
part of Ada Lovelace Day Margo Ilene Seltzer was born in rural, upstate New York. “I like to describe it as a place with more cows than people,” ...

Source Browser
Source Browser Name Size Parent Directory - Apple16X50Serial/ - Apple3Com3C90x/ - AppleAC97Audio/ - AppleADBButtons/ - AppleADBDisplay/ - AppleADBKeyboard/ ...

Old-New Method from BackType
There is considerable interest in real time and big data. One question we hear is, “How does the infrastructure deliver the throughput?” Answering ...


charles leifer - Migrating to SQLite
At times it has seemed to me that there is a tacit agreement within the Flask / Django communities that if you're using SQL you should be using ...

Developers attempt to resurrect Namecoin after flaw discovered
A fatal flaw has been discovered in the Namecoin protocol by the Kraken exchange team, but a fix is on the way.

PostgreSQL Company, Since 1997, PostgreSQL Support, PostgreSQL Consulting and PostgreSQL Development ...
Command Prompt, Inc. is the largest and oldest US based commercial PostgreSQL support provider. We provide the only commercially viable integrated ...

Experts: Oracle and MySQL do not create a database monopoly
The combination of the popular Oracle and MySQL databases won't likely cause regulators to hold up Oracle's proposed acquisition of Sun Microsystems. ...

Resources last updated: 3/25/2016 7:03:05 AM