f



sendmail 8.13.4 451 4.3.0 Temporary system failure

Hello,

after changing to the new sendmail realease 8.13.4 the server quits all mail
with the message "451 4.3.0 Temporay system failure. Try again later"

/var/log/mail.log -------------------------------- schnipp
Jan 16 11:36:27 localhost sm-msp-queue[15535]: k0F1e1W2003364: to=root,
delay=1+08:56:26, xdelay=00:00:00, mailer=relay, pri=10651759,
relay=[10.10.101.111], dsn=4.0.0, stat=Deferred: 451 4.3.0 Temporary system
failure. Please try again later.
Jan 16 11:36:27 localhost sm-msp-queue[15535]: k0ELYGQk004315: to=root,
ctladdr=root (0/0), delay=1+13:02:11, xdelay=00:00:00, mailer=relay,
pri=11910443, relay=[10.10.101.111], dsn=4.0.0, stat=Deferred: 451 4.3.0
Temporary system failure. Please try again later.
/var/log/mail.log---------------------------------schnipp

/etc/mail/submit.mc------------------------------schnipp
divert(0)dnl
#
#   Copyright (c) 2000-2002 Richard Nelson.  All Rights Reserved.
#
#  This file is used to configure Sendmail for use with Debian systems.
#
define(`_USE_ETC_MAIL_')dnl
include(`/usr/share/sendmail/cf/m4/cf.m4')dnl
VERSIONID(`$Id: submit.mc, v 8.13.4-3 2005-06-03 16:49:22 cowboy Exp $')
OSTYPE(`debian')dnl
DOMAIN(`debian-msp')dnl
dnl #
dnl #---------------------------------------------------------------------
dnl # Masquerading information, if needed, should go here
dnl # You likely will not need this, as the MTA will do it
dnl #---------------------------------------------------------------------
dnl MASQUERADE_AS()dnl
dnl FEATURE(`masquerade_envelope')dnl
dnl #
dnl #---------------------------------------------------------------------
dnl # The real reason we're here: the FEATURE(msp)
dnl #---------------------------------------------------------------------
dnl #FEATURE(`msp', `[127.0.0.1]', `MSA')dnl
FEATURE(`msp', `[10.10.101.111]',`MSA')dnl
dnl #
dnl #---------------------------------------------------------------------
dnl # Some minor cleanup from FEATURE(msp)
dnl #---------------------------------------------------------------------
dnl #
dnl #---------------------------------------------------------------------
/etc/mail/submit.mc--------------------------------schnipp

Sendmail-Server-Config.m4----------------------------------------------
include(`../m4/cf.m4')
VERSIONID(`linux for setup with smtp imap spamassassin und amavis which uses
domain names')dnl
OSTYPE(`debian')dnl
define(`confLOG_LEVEL',`9')dnl
define(`confSMTP_LOGIN_MESSAGE',`Mailserver from IAE: $b')dnl
define(`confDEF_USER_ID',`daemon:daemon')dnl
define(`PROCMAIL_MAILER_PATH',`/usr/bin/procmail')dnl
define(`FAX_MAILER_PATH',`/usr/bin/faxmail')dnl
define(`FAX_MAILER_ARGS',`faxmail -d -n -p 12pt $u@$h $f')dnl
define(`QUEUE_DIR',`/var/spool/mqueue')dnl
define(`SMART_HOST',`smtprelay.t-online.de')dnl
define(`confLOCAL_MAILER',`cyrusv2')dnl
define(`confCOPY_ERRORS_TO',`postmaster')dnl
define(`confPRIVACY_FLAGS',`authwarnings,novrfy,noexpn')dnl
define(`confTO_QUEUEWARN',`4h')dnl
###define(`_FFR_MILTER',`1')dnl
###define(`confMILTER_LOG_LEVEL',`14')dnl
DOMAIN(`generic')dnl
FEATURE(`masquerade_envelope')dnl
FEATURE(`always_add_domain')dnl
MASQUERADE_AS(iae.ping.de)dnl
FEATURE(`access_db')dnl
FEATURE(`use_ct_file')dnl
FEATURE(`mailertable',`hash -o /etc/mail/mailertable.db')dnl
FEATURE(`genericstable',`hash -o /etc/mail/genericstable.db')dnl
FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl
FEATURE(dnsbl, `relays.ordb.org', `Mail from $&(client_addr) rejected by IAE
Mailserver; see http://ordb.org/')dnl
FEATURE(dnsbl, `list.dsbl.org', `Mail from $&(client_addr) rejected by IAE
Mailserver; see http://dsbl.org/')dnl
###define(`confINPUT_MAIL_FILTERS',`spamassassin,amavis-milter')dnl
###MAIL_FILTER(`spamassassin', `S=local:/var/run/sendmail/spamass.sock, F=,
T=S:6m;R:6m;E:15m')dnl
###MAIL_FILTER(`amavis-milter',`S=local:/var/lib/amavis/amavisd-new-milter.s
ock,F=, T=S:10m;R:10m;E:15m')dnl
MAILER(`procmail')dnl
MAILER(`smtp')dnl
MAILER(`fax')dnl
MAILER(`cyrusv2')dnl

LOCAL_RULE_0
R$=N   $: $#local $: $1
R$=N < @ $=w . > $: $#local $: $1
Rbb + $ + < @ $=w . > $#cyrusbb $: $1
Sendmail-Server-Config.m4----------------------------------------------end

I don't no what Problem this is
/var/log/mail.log ----------------------------------------------------------
-schnipp
Jan 16 11:36:30 localhost sm-mta[15529]: NOQUEUE: SYSERR(root):
opendaemonsocket: daemon MTA: cannot bind: Address already in use
Jan 16 11:36:30 localhost sm-mta[15529]: daemon MTA: problem creating SMTP
socket
/var/log/mail.log-----------------------------------------------------------
schnipp

You have any hints for me. Thanks a lot.


0
1/16/2006 10:56:37 AM
comp.mail.sendmail 13518 articles. 1 followers. jfretby (35) is leader. Post Follow

1 Replies
1630 Views

Similar Articles

[PageSpeed] 28

The reason was a wrong owner for the files access.db and  aliases.db.

Correct is the user root.
chown root:smmsp /ect/mail/access.db and the same for the other files and
directorys.

A complete decription you can find in "sendmail 8.13 Compandium" from Brian
Costales, Chapter 10, Maintain security with sendmail

Regards

"Michael Hohlsiepe" <m.hohlsiepe@iae.ping.de> schrieb im Newsbeitrag
news:dqftva$k7k$1@lucy.ping.de...
> Hello,
>
> after changing to the new sendmail realease 8.13.4 the server quits all
mail
> with the message "451 4.3.0 Temporay system failure. Try again later"
>
> /var/log/mail.log -------------------------------- schnipp
> Jan 16 11:36:27 localhost sm-msp-queue[15535]: k0F1e1W2003364: to=root,
> delay=1+08:56:26, xdelay=00:00:00, mailer=relay, pri=10651759,
> relay=[10.10.101.111], dsn=4.0.0, stat=Deferred: 451 4.3.0 Temporary
system
> failure. Please try again later.
> Jan 16 11:36:27 localhost sm-msp-queue[15535]: k0ELYGQk004315: to=root,
> ctladdr=root (0/0), delay=1+13:02:11, xdelay=00:00:00, mailer=relay,
> pri=11910443, relay=[10.10.101.111], dsn=4.0.0, stat=Deferred: 451 4.3.0
> Temporary system failure. Please try again later.
> /var/log/mail.log---------------------------------schnipp
>
> /etc/mail/submit.mc------------------------------schnipp
> divert(0)dnl
> #
> #   Copyright (c) 2000-2002 Richard Nelson.  All Rights Reserved.
> #
> #  This file is used to configure Sendmail for use with Debian systems.
> #
> define(`_USE_ETC_MAIL_')dnl
> include(`/usr/share/sendmail/cf/m4/cf.m4')dnl
> VERSIONID(`$Id: submit.mc, v 8.13.4-3 2005-06-03 16:49:22 cowboy Exp $')
> OSTYPE(`debian')dnl
> DOMAIN(`debian-msp')dnl
> dnl #
> dnl #---------------------------------------------------------------------
> dnl # Masquerading information, if needed, should go here
> dnl # You likely will not need this, as the MTA will do it
> dnl #---------------------------------------------------------------------
> dnl MASQUERADE_AS()dnl
> dnl FEATURE(`masquerade_envelope')dnl
> dnl #
> dnl #---------------------------------------------------------------------
> dnl # The real reason we're here: the FEATURE(msp)
> dnl #---------------------------------------------------------------------
> dnl #FEATURE(`msp', `[127.0.0.1]', `MSA')dnl
> FEATURE(`msp', `[10.10.101.111]',`MSA')dnl
> dnl #
> dnl #---------------------------------------------------------------------
> dnl # Some minor cleanup from FEATURE(msp)
> dnl #---------------------------------------------------------------------
> dnl #
> dnl #---------------------------------------------------------------------
> /etc/mail/submit.mc--------------------------------schnipp
>
> Sendmail-Server-Config.m4----------------------------------------------
> include(`../m4/cf.m4')
> VERSIONID(`linux for setup with smtp imap spamassassin und amavis which
uses
> domain names')dnl
> OSTYPE(`debian')dnl
> define(`confLOG_LEVEL',`9')dnl
> define(`confSMTP_LOGIN_MESSAGE',`Mailserver from IAE: $b')dnl
> define(`confDEF_USER_ID',`daemon:daemon')dnl
> define(`PROCMAIL_MAILER_PATH',`/usr/bin/procmail')dnl
> define(`FAX_MAILER_PATH',`/usr/bin/faxmail')dnl
> define(`FAX_MAILER_ARGS',`faxmail -d -n -p 12pt $u@$h $f')dnl
> define(`QUEUE_DIR',`/var/spool/mqueue')dnl
> define(`SMART_HOST',`smtprelay.t-online.de')dnl
> define(`confLOCAL_MAILER',`cyrusv2')dnl
> define(`confCOPY_ERRORS_TO',`postmaster')dnl
> define(`confPRIVACY_FLAGS',`authwarnings,novrfy,noexpn')dnl
> define(`confTO_QUEUEWARN',`4h')dnl
> ###define(`_FFR_MILTER',`1')dnl
> ###define(`confMILTER_LOG_LEVEL',`14')dnl
> DOMAIN(`generic')dnl
> FEATURE(`masquerade_envelope')dnl
> FEATURE(`always_add_domain')dnl
> MASQUERADE_AS(iae.ping.de)dnl
> FEATURE(`access_db')dnl
> FEATURE(`use_ct_file')dnl
> FEATURE(`mailertable',`hash -o /etc/mail/mailertable.db')dnl
> FEATURE(`genericstable',`hash -o /etc/mail/genericstable.db')dnl
> FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable.db')dnl
> FEATURE(dnsbl, `relays.ordb.org', `Mail from $&(client_addr) rejected by
IAE
> Mailserver; see http://ordb.org/')dnl
> FEATURE(dnsbl, `list.dsbl.org', `Mail from $&(client_addr) rejected by IAE
> Mailserver; see http://dsbl.org/')dnl
> ###define(`confINPUT_MAIL_FILTERS',`spamassassin,amavis-milter')dnl
> ###MAIL_FILTER(`spamassassin', `S=local:/var/run/sendmail/spamass.sock,
F=,
> T=S:6m;R:6m;E:15m')dnl
>
###MAIL_FILTER(`amavis-milter',`S=local:/var/lib/amavis/amavisd-new-milter.s
> ock,F=, T=S:10m;R:10m;E:15m')dnl
> MAILER(`procmail')dnl
> MAILER(`smtp')dnl
> MAILER(`fax')dnl
> MAILER(`cyrusv2')dnl
>
> LOCAL_RULE_0
> R$=N   $: $#local $: $1
> R$=N < @ $=w . > $: $#local $: $1
> Rbb + $ + < @ $=w . > $#cyrusbb $: $1
> Sendmail-Server-Config.m4----------------------------------------------end
>
> I don't no what Problem this is
>
/var/log/mail.log ----------------------------------------------------------
> -schnipp
> Jan 16 11:36:30 localhost sm-mta[15529]: NOQUEUE: SYSERR(root):
> opendaemonsocket: daemon MTA: cannot bind: Address already in use
> Jan 16 11:36:30 localhost sm-mta[15529]: daemon MTA: problem creating SMTP
> socket
>
/var/log/mail.log-----------------------------------------------------------
> schnipp
>
> You have any hints for me. Thanks a lot.
>
>


0
1/16/2006 1:18:06 PM
Reply:

Similar Artilces:

Sendmail 8.14.4 or Sendmail 8.15.0
Are either coming down the pipe? -- Member - Liberal International This is doctor@nl2k.ab.ca Ici doctor@nl2k.ab.ca God, Queen and country! Beware Anti-Christ rising! Never Satan President Republic! Rudeness is the weak man's imitation of strength. -Eric Hoffer ...

sendmail 8.13.0 build fails on Mac OS 10.3.4
Get the following errors on build: cc -pipe -o vacation vacation.o /src/sendmail-8.13.0/obj.Darwin.7.4.0.PowerMacintosh/libsmdb/libsmdb.a /src/sendmail-8.13.0/obj.Darwin.7.4.0.PowerMacintosh/libsmutil/libsmutil.a /src/sendmail-8.13.0/obj.Darwin.7.4.0.PowerMacintosh/libsm/libsm.a ld: Undefined symbols: _sm_mbdb_initialize _sm_mbdb_lookup make[1]: *** [vacation] Error 1 make: *** [all] Error 2 Is this a problem with Berkeley DB? Randall Perry http://www.systame.com/ -----BEGIN PGP SIGNED MESSAGE----- Hash: RIPEMD160 Randall Perry wrote: | Get the following errors on build: | | cc -pipe -o vacation vacation.o | /src/sendmail-8.13.0/obj.Darwin.7.4.0.PowerMacintosh/libsmdb/libsmdb.a | /src/sendmail-8.13.0/obj.Darwin.7.4.0.PowerMacintosh/libsmutil/libsmutil.a | /src/sendmail-8.13.0/obj.Darwin.7.4.0.PowerMacintosh/libsm/libsm.a | ld: Undefined symbols: | _sm_mbdb_initialize | _sm_mbdb_lookup | make[1]: *** [vacation] Error 1 | make: *** [all] Error 2 | <snip> What is defined in sm/mbdb.h ? - -d -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.3.6 (Darwin) iD8DBQFA2L++PMoaMn4kKR4RAzWtAJ0VcI5rs0ANPGhcnr0Zv/W8BprTWACgjUM2 k0GqkEwQ/N87+eS+vUFT1Ws= =/sf8 -----END PGP SIGNATURE----- I discovered the problem's not with sendmail. Was able to be succesfully on another Mac; the Mac I did the original build on seems to have some problems with gcc as I'm getting this error: cc: Internal error: Segmentation fault (program /usr/libexec/gcc/darwin/ppc/cpp-preco...

Sendmail 8.13.0 Beta2 bugs in BSDD/OS 4.3.1
Thank you Claus. I did make a modifiction as suggested. The lastest gdb gives me: Script started on Fri May 28 22:54:23 2004 doctor.nl2k.ab.ca//usr/source/sendmail-8.13.0.Beta2/obj.BSD-OS.4.3.1.i386/sendmai il$ gdb sendmail /var/spool/mqueue.in/sendmail.core GNU gdb Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty&q...

sendmail 8.13.4 + Red Hat Enterprise ES 3.0 -- memory faullt & DNS lookups
I am having an on-going, yet intermittent problem with sendmail having segmentation faults related to DNS lookups. The more common symptom is that sendmail closes the connection on port 25 immediately after answering, but before displaying the banner. I don't know what starts the behavior, but straces indicate that the problem is somehow related to nscd or DNS lookups. In this case, either starting nscd or rebooitng the system clears the problem up (weird). Note that nscd is not usually running to begin with - not sure why sendmail is suddenly satisfied when nscd is, in fact, started. And yes, stopping nscd (if starting nscd to clear up the problem) makes the problem come back, IF sendmail is restarted after that. The recent symptom is related to using custom ldap lookup rules in parselocal A "sendmail -bv jo@blow.com" simply causes a fairly immediate memory fault. It doesn't seem to be anything specifically related to ldap, but again, strace reveals that something happens related to DNS lookups that causes sendmail grief. What is the problem? I compiled this version of sendmail myself - it is not from an rpm. the rules: # look up the address in Active Directory/Exchange via LDAP R$+ <@$=B.>$* $: $(msadu_mail $1@$m $:$1<@$2.>$3 $) # if it is found and the same address, send it to the exchange system R$* @ $m .x $#smtp $@ ${MSEXCH_H} $: $1 < @ $m > # if it is found and is local, drop the @ $=w and pa...

Problem Using Sendmail 8.13.3 with BerkeleyDB.4.3
Hello, I am using RedHat release 9 of Linux on a Dell Dimension 2400 box. I want to install Sendmail 8.13.3 for use as a mail server First, I downloaded and installed BerkeleyDB.4.3 Then I built and installed Sendmail. But, when I run the 'newaliases' command or try to run the Sendmail executable, I get the error message : "error while loading shared libraries : libdb-4.3.so cannot open shared object file. No such file or directory. I have checked the directory /usr/local/BerkeleyDB.4.3/lib and there IS a libdb.4.3.so executable there. Could I please get some pointers from ...

Sendmail 8.13 and DB 4.4.20
It his combination working properly? -- Member - Liberal International This is doctor@nl2k.ab.ca Ici doctor@nl2k.ab.ca God Queen and country! Beware Anti-Christ rising! Beware Linux the MS Windows of Unix! Demand UseNet an integral part of Internet! The Doctor napisa�(a): > It his combination working properly? I have sendmail 8.13.7 and Berkeley DB 4.4.20 and it's working without any problems. -- Pozdrawiam Zbigniew Jasinski [SYStem OPerator] ...

Problem Using Sendmail 8.13.3 with BerkeleyDB.4.3 #2
Hello, I am using RedHat release 9 of Linux on a Dell Dimension 2400 box. I want to install Sendmail 8.13.3 for use as a mail server First, I downloaded and installed BerkeleyDB.4.3 Then I built and installed Sendmail. But, when I run the 'newaliases' command or try to run the Sendmail executable, I get the error message : "error while loading shared libraries : libdb-4.3.so cannot open shared object file. No such file or directory. I have checked the directory /usr/local/BerkeleyDB.4.3/lib and there IS a libdb.4.3.so executable there. Could I please get some pointers from ...

Sendmail 8.13.X and DB-4.4.X
Can this marriage happen? -- Member - Liberal International This is doctor@nl2k.ab.ca Ici doctor@nl2k.ab.ca God Queen and country! Beware Anti-Christ rising! Remember Christ is the Reason for the Season . Happy Christmas 2005 and Merry New Year 2006 "The Doctor" <doctor@doctor.nl2k.ab.ca> wrote in message news:dlq17i$a6$18@gallifrey.nk.ca... > Can this marriage happen? > -- I too would like to know the answer to this. Does it work out of the box - does anyone know? -JD JD Bronson wrote: > "The Doctor" <doctor@doctor.nl2k.ab.ca> wrote in message >>Can this marriage happen? > I too would like to know the answer to this. > Does it work out of the box - does anyone know? I don't know, but... Does sendmail compile with ? If it doesn't, wait for some future release of sendmail. Berkeley DB is a very performant database but its interface change frequently. So the source code of all software using it shall be modified each time BerkeleyDB changes its interface (if we're using BDB version A, use this function prototypes, else, if using BDB version B, then bla bla bla). But old versions of BerkeleyDB work fine. If there is no reason other than using the "really really really last version" of Berkeley DB software it's better to use the old one. Jose Marcio Martins da Cruz wrote: > JD Bronson wrote: > >>"The Doctor" <doctor@doctor.nl2k.ab.ca> wrote in message...

Sendmail 8.13.4 and AIX 5.3
I just set up an AIX 5.3 system and I'm trying to install sendmail 8.13.4. So far its been a non-starter. Before I go crazy, I noticed that there doesn't seem to be an OSTYPE for AIX 5.3. Can sendmail 8.13.4 run on AIX 5.3 yet? If its not an AIC 5.3 issue.... Its been awhile since I've installed sendmail from scratch, can anyone give me a pointer or two? wrote: > I just set up an AIX 5.3 system and I'm trying to install sendmail > 8.13.4. So far its been a non-starter. Before I go crazy, I noticed > that there doesn't seem to be an OSTYPE for AIX 5.3. Can sendmail > 8.13.4 run on AIX 5.3 yet? AFAIK: yes. Some fixes for 64 bit mode etc went into 8.13.4 as you can see in the release notes. Maybe you can share the error(s) you encountered? -- Note: please read the netiquette before posting. I will almost never reply to top-postings which include a full copy of the previous article(s) at the end because it's annoying, shows that the poster is too lazy to trim his article, and it's wasting my time. I go into the source top directory, type "Build" and here is what I get. (Hope its readable.) Thanks Making all in: /usr/local/src/sendmail-8.13.4/libsm Configuration: pfx=, os=AIX, rel=5.3.0, rbase=5, rroot=5.3, arch=PPC, sfx=, vari ant=optimized Making in /usr/local/src/sendmail-8.13.4/obj.AIX.5.3.0.PPC/libsm cc -g -I. -I../../include -DNDBM -DNIS -D_AIX3 -c debug.c "../../include/sm/conf.h", line 2696...

Compilation errors sendmail 8.13.4 Mac OS X 10.4
When I try to recompile sendmail 8.13.4 using gcc 4.4 with Mac's new OS (10.4), the compilation fails, but does not exit, with the following error: cc -pipe -M -I. -I../../include -I/usr/local/include/sasl -DSASL=2 -DMILTER -DMAP_REGEX -DNETINFO -DAUTO_NETINFO_ALIASES -DAUTO_NETINFO_HOSTS -DMATCHGECOS -DSCANF -DXDEBUG -DSTARTTLS -DNEWDB -USERDB -DDARWIN main.c alias.c arpadate.c bf.c collect.c conf.c control.c convtime.c daemon.c deliver.c domain.c envelope.c err.c headers.c macro.c map.c mci.c milter.c mime.c parseaddr.c queue.c ratectrl.c readcf.c recipient.c sasl.c savemail.c sfsasl.c shmticklib.c sm_resolve.c srvrsmtp.c stab.c stats.c sysexits.c timers.c tls.c trace.c udb.c usersmtp.c util.c version.c >> Makefile conf.c:2362:24: error: sys/exec.h: No such file or directory make[1]: *** [depend] Error 1 Making in /Users/royar/src/sendmail-8.13.4/obj.Darwin.8.0.0.PowerMacintosh/sendmail The new sys does not have the exec.h file. Have any others seen this with gcc 4.4 or the new OS X? Did my install simply miss the file, or does conf.c need to be changed? Are there perhaps m4 configurations that need to be changed for the new system? -- Robert Delius Royar The email address is valid as it is written. You know, what this country needs is a seven-cent nickel. -Groucho Marx In article <Pine.OSX.4.62.0504282222130.647@teraqny.sevanohynk.bet>, r royar <royar-nomail@adelphia.net&...

RENEW 0.8.6.1.7.9.4.3.0.3.9.4.e164.arpa.
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 ProvID: DENIC-24 Enum-Domain: 0.8.6.1.7.9.4.3.0.3.9.4.e164.arpa. Action: RENEW Enum-Holder: DENIC-24-KF108 Admin-C: DENIC-24-KF108 Tech-C: DENIC-24-TSB4 Zone-C: DENIC-24-TSB4 Nserver: ns.dnsnglab.ipv6.berkom.de. Nserver: ns2.dnsnglab.ipv6.berkom.de. Remarks: TSI ENUM-Trial Teilnehmer -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQFBRXqOS9pACF8jgjwRArEvAJ4jBAdqTC8AKL+c0LL4RgXZ7J1f5gCgwXVo FgJZgHLnEk64xIRCM+S5XuI= =dC1s -----END PGP SIGNATURE----- ...

Perl5.8.6 AIX 4.3.3 VAC4.4.0.3
Perl: 5.8.6 OS: AIX4.3.3 ML11 Compiler: vac.C 4.4.0.3 I'm wanting to compile 5.8.6 w/ thread support. I'm failing on in make test on ext/threads/t/libc.t. If I run it directly I get this: 1..11 ok 1 not ok 2 # not a safe localtime not ok 3 # not a safe localtime not ok 4 # not a safe localtime not ok 5 # not a safe localtime ok 6 not ok 7 # not a safe localtime not ok 8 # not a safe localtime not ok 9 # not a safe localtime not ok 10 # not a safe localtime ok 11 I noticed it will fail different ones each time I run it. I was compiling with AIX default except enabling thread support ...

& # 4 0 ; & # 4 4 3 0 5 ; & # 4 4 2 5 6 ; & # 4 1 ;��������� ARS���� �����ؿ�(����)
<HTML> <HEAD> <META content="text/html; charset=ks_c_5601-1987" http-equiv=Content-Type> <STYLE> p, font, span { line-height:120%; margin-top:0; margin-bottom:0; }</STYLE> </HEAD><BODY> <TABLE borderColor=#cccccc width=629 borderColorLight=#cccccc border=1> <TBODY> <TR> <TD width=619 height=67> <P align=center><FONT face=����><SPAN style="FONT-SIZE: 11pt"><IMG src="http://www.ezbizi.com/ezbizi/home_img/daechul_01.gif"></SPAN></FONT></P>&l...

& # 4 0 ; & # 4 4 3 0 5 ; & # 4 4 2 5 6 ; & # 4 1 ;@��������� ARS���� �����ؿ�@(����)
<HTML> <HEAD> <META content="text/html; charset=ks_c_5601-1987" http-equiv=Content-Type> <STYLE> p, font, span { line-height:120%; margin-top:0; margin-bottom:0; }</STYLE> </HEAD><BODY> <table border="1" width="629" bordercolor="#cccccc" bordercolorlight="#cccccc"> <tr> <td width="619" height="67"> <p align="center"><font face="����"><span style="FONT-SIZE: 11pt"></span></font></p...

Apache 2.0.48+Php 4.3.4+Aix 4.3.3
Hello. I'm trying to compile this version of apache with php support on Aix 4.3.3ML11. I use gcc 3.2.1 compiler and all seems to go right. But when i try to access to a php page apache shows segmentation fault and doesn't answer. Any idea ? Thanks. ...

Apache 2.0.48+php 4.3.4+Aix 4.3.3
Hello. I'm trying to compile this version of apache with php support on Aix 4.3.3ML11. I use gcc 3.2.1 compiler and all seems to go right. But when i try to access to a php page apache shows segmentation fault and doesn't answer. Any idea ? Thanks. > Hello. > I'm trying to compile this version of apache with php support on Aix > 4.3.3ML11. > I use gcc 3.2.1 compiler and all seems to go right. > But when i try to access to a php page apache shows segmentation fault and > doesn't answer. > > Any idea ? Does Apache also segfaults wh...

Install sendmail-8.13.4 on Redhat Enterprise Linux ES v3.0 get error like this
[root@server60 sendmail]# sh Build Configuration: pfx=, os=Linux, rel=2.4.21-4.EL, rbase=2, rroot=2.4.21-4, arch=i686, sfx=, variant=optimized Making in /sources/sendmail-8.13.4/obj.Linux.2.4.21-4.EL.i686/sendmail (cd ../../libsm; sh Build ) Configuration: pfx=, os=Linux, rel=2.4.21-4.EL, rbase=2, rroot=2.4.21-4, arch=i686, sfx=, variant=optimized Making in /sources/sendmail-8.13.4/obj.Linux.2.4.21-4.EL.i686/libsm make[1]: Entering directory `/sources/sendmail-8.13.4/obj.Linux.2.4.21-4.EL.i686/libsm' cc -O2 -I. -I../../include -c -o assert.o assert.c In file included from ../../include/sm/config.h:23, from ../../include/sm/gen.h:20, from assert.c:11: ../sm_os.h:19:27: linux/version.h: No such file or directory In file included from ../../include/sm/gen.h:21, from assert.c:11: .../../include/sm/cdefs.h:29:25: sys/cdefs.h: No such file or directory In file included from ../../include/sm/gen.h:22, from assert.c:11: .../../include/sm/types.h:31:24: sys/types.h: No such file or directory assert.c:19:20: signal.h: No such file or directory assert.c:20:20: stdlib.h: No such file or directory assert.c:21:20: unistd.h: No such file or directory In file included from ../../include/sm/debug.h:21, from ../../include/sm/assert.h:21, from assert.c:23: .../../include/sm/io.h:24:19: stdio.h: No such file or directory In file included from ../../include/sm/debug.h:21, ...

Weird dates from mssql (4.2.3 / 4.4.0-3)
Hi SQL Server 2000 Database: Table: Thing Columns: id (int), nameOfThing (int), dateOfThing (datetime) I put some data in it: 1, dave, 9/11/1973 14:33:22 2, bill, 12/6/1980 13:23:33 Then I run a query from PHP4.4.0-3 (on Ubuntu) from Apache2. <?php $db_server = "192.168.1.123"; $model_connection = mssql_connect ($db_server, "user", "password"); mssql_select_db ("davetest", $model_connection); $sql = "select dateOfThing from Thing where id = 1"; $result = mssql_query($sql, $model_connection); $myarray = mssql_fetch_row ($result); print_r($myarray); ?> Result is this: Array ( [0] => Tue Sep 11 00:00:00 1973 ) When I really want: 9/11/1973 14:33:22 I thought I'd fixxed it with the php.ini line: mssql.datetimeconvert = Off However it still returns the same 'converted' datetime. I have restarted Apache and restarted the machine. I have made sure this is the correct php.ini file I'm editing too. Summary On our production box which is running PHP4.2.3 I get: PHP4.2.3 - Sep 11 1973 2:33PM (notice it is even chopping off seconds) PHP4.4.0-3 - Tue Sep 11 14:33:22 1973 How to turn off this date conversion / formatting? Cheers Dave. More info: sajuks on experts-exchange.com kindly suggested: echo date("m/d/Y h:i:s", strtotime($row['dateOfThing']))."<br>"; which wil work.. however we've got a lot of legacy code which will need fixxing (groan).. so ...

Sendmail 8.13.6 getting "451 Message temporarily deferred
I'm running a mailman mailing list which is trying to deliver a posting to yahoo email addresses. Yahoo accepts about 50 emails (of about 500+) and then I get error: 451 Message temporarily deferred - 4.16.50 , for 3-5 messages, after which I get "Deferred: Invalid argument". (it seems like I should be getting 451's for all ..) Forced reprocessing the mailq using /usr/sbin/sendmail -v -qRyahoo.com _sometimes_ lets another 50 or less through -- it seems to be a function of when the last time the queue was processed. So delivery to yahoo of this mailing list is now taking about 24 hours (problem discovered 12hrs into the distribution process). This problem exists only with yahoo - all other receipients of the mailing list are working fine. This problem started this weekend. Running on FreeBSD 6.1 TIA to any suggestions on how to speedup this process. I'm seeing pretty much the same thing today with messages being sent to Yahoo, i.e. stat=Deferred: 451 Message temporarily deferred - 4.16.50 though no "Deferred: Invalid argument' warnings. Most of the messages seem to eventually get through, but not all. Sassa55 wrote: > I'm running a mailman mailing list which is trying to deliver a posting > to yahoo email addresses. > Yahoo accepts about 50 emails (of about 500+) and then I get error: 451 > Message temporarily deferred - 4.16.50 , for 3-5 messages, after which > I get "Deferred: Invalid argument". (it see...

sending e-mail to oneself (w/ sendmail 8.13.8+Sun/8.13.8)
Hello everyone, I hate to ask a basic question. But I already spent two weeks. I think I have suffered enough to post a question. I have been using Solaris 9 (SPARC) for years. My sendmail.mc with older sendmail worked okay for years. Now I updated my machine to Solaris 10, which comes with a newer version of sendmail (8.13.8). I tried my old sendmail.mc (with some tweaks) but it didn't work. So, I reverted the changes I made, one by one. Finally, I used the original sendmail.mc that comes with Solaris 10. It still didn't work. The problem I'm having is that I cannot send e-mails to myself. (Mail client == Mail host) I tried: # /usr/lib/sendmail -v myself </dev/null It hangs. The mail is stored in a spool because sendmail failed to deliver. I can see it by using 'mailq' command. Eventually the e-mail is forwarded to 'root' as an undeliverable e- mail (from MAIL-DAEMON). 553 5.3.5 mailhost.my_domain.com config error: mail loops back to me (MX problem?)554 5.3.5 Local configuration error As you my suspect, I can send an e-mail to somebody else (local). // My question is: What is the correct sequence should occur when sending e-mail to oneself? How can I debug this problem? (After e-amil is submitted to a mail spool) // The newer version of sendmail now uses 'submit.cf'. I'm suspecting that sendmail puts e-mails into a spool even the e-mail doesn't need any relaying. As my understanding of sendmail is very shallow, I'...

Apache 2.0.4.6 (Win) PHP 4.3.4.4
Hello there, We have PHP ver 4.3.4.4 working off Apache server version 2.0.4.6. My developer has developed a bunch of basic web pages which interact with the SQL Server 2000. We exposed the web application to the outside world though port 80 and the server crashed all of a sudden the very next day. Are there any security vulneribities with PHP ver 4.3.4.4 and Apache server version 2.0.4.6.which I need to be aware off. My developer is reluctant to upgrade the server to new version of apache and php. Any suggestion, help or pointer in the right direction will be appreciated. Thanks, anup...

Apache 2.0.4.6 (Win) PHP 4.3.4.4
Hello there, We have PHP ver 4.3.4.4 working off Apache server version 2.0.4.6. My developer has developed a bunch of basic web pages which interact with the SQL Server 2000. We exposed the web application to the outside world though port 80 and the server crashed all of a sudden the very next day. Are there any security vulneribities with PHP ver 4.3.4.4 and Apache server version 2.0.4.6.which I need to be aware off. My developer is reluctant to upgrade the server to new version of apache and php. Any suggestion, help or pointer in the right direction will be appreciated. Thanks, anup...

PGSQL 7.4.8 PHP 4.3.4 & Apache 2.0.49 Segmentation Fault with Client Certs
Hello, Having an issue that is specific to PHP compiled with PGSQL support with versions noted in subject line. I understand that there are many variables to consider here but believe I have narrowed down the Apache Client Cert failures to my PHP/PGSQL build. 1. Apache PHP without PGSQL works as expected using client certificates 2. Apache PHP with PGSQL works fine with standard SSL connections 3 Apache PHP with PGSQL fails with client certificates - no output other than Segmentation faults in the apache error logs as follows: [Wed Nov 30 23:26:57 2005] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec2) [Wed Nov 30 23:26:58 2005] [notice] Apache configured -- resuming normal operations [Wed Nov 30 23:27:05 2005] [notice] child pid 4065 exit signal Segmentation fault (11) [Wed Nov 30 23:27:06 2005] [notice] child pid 4066 exit signal Segmentation fault (11) I also performed same tests on another instance of Apache/PHP/PGSQL which was version 2.0.54 of apache and PHP/PGSQL versions same as subject line with same exact results. Any ideas as to the source of this problem and suggestions for tests/fixes are greatly appreciated. There are no errors in any of the logs other than what I have included so it's very difficult to see what is wrong. All I know for sure is that I am able to reproduce the results on more than one machine. The switch that kills everthing is turning SSLVerifyClient require SSLVerifyDepth 1 on in the apache config...

Formmail and Sendmail 8.13.4
Are there any known problems with Formmail (any version) Sendmail 8.13.4 spam assassin 3.X clamav 0.82 ?? Some users are saying that their e-mail using formmail is not getting through. -- Member - Liberal International This is doctor@nl2k.ab.ca Ici doctor@nl2k.ab.ca God Queen and country! Beware Anti-Christ rising! Better to serve in Heaven that to Rule in Hell. The Doctor wrote: > Are there any known problems with > > Formmail (any version) > Sendmail 8.13.4 > spam assassin 3.X > clamav 0.82 Outdated and probably not getting updated any longer (as you'd know if you checked the logs). Update to 0.86.2 immediately. > Some users are saying that their e-mail using formmail is not getting > through. So, look in your mail logs. -- Rob MacGregor (BOFH) Oh my God! They killed init! You bastards! You can't stop the signal - Serenity In article <ddt7df$nn9$1@carbon.macgregor>, Rob MacGregor <rob_macgregor@hotmail.com> wrote: >The Doctor wrote: >> Are there any known problems with >> >> Formmail (any version) >> Sendmail 8.13.4 >> spam assassin 3.X >> clamav 0.82 > >Outdated and probably not getting updated any longer (as you'd know if >you checked the logs). Update to 0.86.2 immediately. > Sorry I mean to say 0.86.2 >> Some users are saying that their e-mail using formmail is not getting >> through. > >So, look in your mail logs. > So...

Web resources about - sendmail 8.13.4 451 4.3.0 Temporary system failure - comp.mail.sendmail

Temporary - Wikipedia, the free encyclopedia
Text is available under the Creative Commons Attribution-ShareAlike License ;additional terms may apply. By using this site, you agree to the ...

Report: Facebook To Open Temporary Vancouver Office To Recruit, Train Engineering Talent
Facebook will set up a temporary office in Vancouver , British Columbia, where it will conduct “boot camps” to train recent software engineering ...

Facebook brings post insights back to Pages Manager app after temporary removal
A recent update to Pages Manager for iOS has returned detailed post insights to the product after a version earlier this month was released without ...

TFRs: Temporary Flight Restrictions Aviation Pilot NOTAMs for iPhone, iPod touch, and iPad on the iTunes ...
Get TFRs: Temporary Flight Restrictions Aviation Pilot NOTAMs on the App Store. See screenshots and ratings, and read customer reviews.

QR Code Temporary Tattoo SCANS!!! - Flickr - Photo Sharing!
Embed metadata on your skin with these temporary QR Code tattoos. You can personalize the 2D barcode with plain text, website URL, email address, ...

Paul McCartney - Temporary Secretary - YouTube
please comment~~~~~ lyrics :::: Mister Marks Can You Find For Me Someone Strong And Sweet Fitting On My Knee She Can Keep Her Job If She Gets ...

Temporary speed reduction on Abu Dhabi-Dubai highway - The National
Radars along a stretch of the road will be set at 121kph, down from 141kph, as roadwork is carried out.

Labor dilemma on temporary protection visas for refugees
... internal debate over whether to shadow the Abbott government closely on refugee policy or oppose the government's tough plan to restore temporary ...

Morrison says deficit levy 'only temporary'
Treasurer Scott Morrison says a 'deficit levy' on high-income earners was always a temporary measure.

Apple Watch Diary: A (temporary) world without Apple Pay
I said last summer in my Apple Watch Diary series that Apple Pay arriving in the UK was the tipping point for me in transforming the Watch from ...

Resources last updated: 3/25/2016 6:13:25 AM