f



iMac G3 debian 5 ppc gui

--nextPart1744690.DZkT8p0MMh
Content-Type: text/plain; charset="ISO-8859-1"
Content-Transfer-Encoding: 7Bit

Hi.
iMac G3 with Debian 5.04 ppc. Console works fine, but the 
font is slightly out of bounds so that half of the command 
line is visible. 
The Gui had the  black screen (long known for r128 in G3) 
until the xorg.conf was manipulated according to googled 
advice. Now the gdm screen comes up ok, but freezes after 
login info. 
My current xorg.conf and log are appended.
Who can help?
JJ 
--nextPart1744690.DZkT8p0MMh
Content-Type: text/x-log; name="Xorg.0.log"
Content-Transfer-Encoding: 8Bit
Content-Disposition: attachment; filename="Xorg.0.log"


X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny2)
Current Operating System: Linux lehmann 2.6.26-2-powerpc #1 Wed Jan 13 01:08:21 UTC 2010 ppc
Build Date: 11 June 2009  09:52:37AM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 31 23:05:07 1903
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
	Using the first device section listed.
(**) |   |-->Device "Configured Video Device"
(==) |-->Input Device "Configured Mouse"
(==) |-->Input Device "Generic Keyboard"
(==) The core pointer device wasn't specified explicitly in the layout.
	Using the first mouse device.
(==) The core keyboard device wasn't specified explicitly in the layout.
	Using the first keyboard device.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified.  Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x101e350c
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 2.0
	X.Org XInput driver : 2.0
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:0b:0: chip 106b,0027 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:10:0: chip 1002,5452 card 1002,5452 rev 00 class 03,80,00 hdr 00
(II) PCI: 10:0b:0: chip 106b,0028 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 10:17:0: chip 106b,0025 card 0000,0000 rev 00 class ff,00,00 hdr 00
(II) PCI: 10:18:0: chip 106b,0026 card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 10:19:0: chip 106b,0026 card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 20:0b:0: chip 106b,0029 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 20:0e:0: chip 106b,0030 card 106b,0030 rev 00 class 0c,00,10 hdr 00
(II) PCI: 20:0f:0: chip 106b,0024 card 0000,0000 rev 00 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:11:0), (0,0,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 16: bridge is at (16:11:0), (16,16,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 16 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 16 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 16 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 32: bridge is at (32:11:0), (32,32,32), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 32 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 32 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 32 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:16:0) ATI Technologies Inc Rage 128 Pro Ultra TR rev 0, Mem @ 0x94000000/26, 0x90000000/14, I/O @ 0x0400/8, BIOS @ 0xf1000000/17
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[1] -1	0	0xf5000000 - 0xf5ffffff (0x1000000) MX[B]E
	[2] -1	0	0x80080000 - 0x800fffff (0x80000) MX[B]E
	[3] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[4] -1	0	0x80000000 - 0xffffffff (0x80000000) MX[B]E
	[5] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[6] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[7] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[8] -1	0	0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) PCI Memory resource overlap reduced 0xf5000000 from 0xf5ffffff to 0xf51fffff
(II) PCI Memory resource overlap reduced 0x80080000 from 0x800fffff to 0x80080fff
(II) PCI Memory resource overlap reduced 0x80000000 from 0xffffffff to 0x8007ffff
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[1] -1	0	0xf5000000 - 0xf51fffff (0x200000) MX[B]E
	[2] -1	0	0x80080000 - 0x80080fff (0x1000) MX[B]E
	[3] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[4] -1	0	0x80000000 - 0x8007ffff (0x80000) MX[B]E
	[5] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[6] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[7] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[8] -1	0	0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[5] -1	0	0xf5000000 - 0xf51fffff (0x200000) MX[B]E
	[6] -1	0	0x80080000 - 0x80080fff (0x1000) MX[B]E
	[7] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[8] -1	0	0x80000000 - 0x8007ffff (0x80000) MX[B]E
	[9] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[10] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[11] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.4.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) Matched r128 from file name r128.ids in autoconfig
(==) Matched r128 for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "r128"
(II) Loading /usr/lib/xorg/modules/drivers//r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 6.8.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.3.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.3.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) R128: Driver for ATI Rage 128 chipsets:
	ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
	ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
	ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
	ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
	ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
	ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
	ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
	ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
	ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
	ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
	ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
	ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
	ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
	ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
	ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
	ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
	ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
	ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
	ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
	ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
	ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
	ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
	ATI Rage 128 Pro ULTRA TU (AGP?)
(II) Primary Device is: PCI 00:10:0
(--) Chipset ATI Rage 128 Pro ULTRA TR (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[5] -1	0	0xf5000000 - 0xf51fffff (0x200000) MX[B]E
	[6] -1	0	0x80080000 - 0x80080fff (0x1000) MX[B]E
	[7] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[8] -1	0	0x80000000 - 0x8007ffff (0x80000) MX[B]E
	[9] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[10] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[11] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[12] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[14] -1	0	0xf0000400 - 0xf00004ff (0x100) IX[B](B)
(WW) ****INVALID IO ALLOCATION**** b: 0xf0000400 e: 0xf00004ff correcting
(EE) end of block range 0xefffffff < begin 0xf0000000
(II) window:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resSize:
(II) window fixed:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[5] -1	0	0xf5000000 - 0xf51fffff (0x200000) MX[B]E
	[6] -1	0	0x80080000 - 0x80080fff (0x1000) MX[B]E
	[7] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[8] -1	0	0x80000000 - 0x8007ffff (0x80000) MX[B]E
	[9] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[10] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[11] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[12] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[13] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[14] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[15] -1	0	0x00000400 - 0x000004ff (0x100) IX[B](B)
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] 0	0	0xf00003b0 - 0xf00003bb (0xc) IS[B]
	[19] 0	0	0xf00003c0 - 0xf00003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) R128(0): PCI bus 0 card 16 func 0
(**) R128(0): Depth 24, (--) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(**) R128(0): Option "UseFBDev" "true"
(II) R128(0): VGAAccess option set to FALSE, VGA module load skipped
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
(**) R128(0): Using framebuffer device
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 0.0.2
	ABI class: X.Org Video Driver, version 2.0
(--) R128(0): Chipset: "ATI Rage 128 Pro ULTRA TR (AGP)" (ChipID = 0x5452)
(--) R128(0): Linear framebuffer at 0x94000000
(--) R128(0): MMIO registers at 0x90000000
(--) R128(0): BIOS at 0xf1000000
(--) R128(0): VideoRAM: 16384 kByte (128-bit SDR SGRAM 1:1)
(**) R128(0): Using external CRT for display
(II) Attempted to read BIOS 64KB from /sys/bus/pci/devices/0000:00:10.0/rom: got 0KB
(WW) R128(0): Video BIOS not detected in PCI space!
(WW) R128(0): Attempting to read Video BIOS from legacy ISA space!
(WW) R128(0): Video BIOS not found!
(II) R128(0): Primary Display == Type 3
(WW) R128(0): Can't determine panel dimensions, and none specified.
	Disabling programming of FP registers.
(II) R128(0): PLL parameters: rf=2950 rd=59 min=12500 max=25000; xclk=13000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module "i2c" already built-in
(II) R128(0): I2C bus "DDC" initialized.
(II) R128(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) R128(0): I2C device "DDC:ddc2" removed.
(EE) R128(0): No DFP detected
(II) R128(0): Configured Monitor: Using hsync value of 60.00 kHz
(II) R128(0): Configured Monitor: Using vrefresh range of 75.00-117.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x175" (unknown reason)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x200" (unknown reason)
(II) R128(0): Not using default mode "720x400" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "360x200" (unknown reason)
(II) R128(0): Not using default mode "640x480" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x240" (unknown reason)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x240" (unknown reason)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x240" (unknown reason)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "320x240" (unknown reason)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "400x300" (unknown reason)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "400x300" (unknown reason)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "400x300" (unknown reason)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "400x300" (unknown reason)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "400x300" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "1024x768" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "512x384" (unknown reason)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "512x384" (unknown reason)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "512x384" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "512x384" (unknown reason)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "512x384" (unknown reason)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "576x432" (unknown reason)
(II) R128(0): Not using default mode "1280x960" (vrefresh out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "640x480" (unknown reason)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "640x480" (unknown reason)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "640x512" (unknown reason)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "640x512" (unknown reason)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "640x512" (unknown reason)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "800x600" (unknown reason)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "800x600" (unknown reason)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "800x600" (unknown reason)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "800x600" (unknown reason)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "800x600" (unknown reason)
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "896x672" (unknown reason)
(II) R128(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "896x672" (unknown reason)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "928x696" (unknown reason)
(II) R128(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "928x696" (unknown reason)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "960x720" (unknown reason)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "960x720" (unknown reason)
(II) R128(0): Not using default mode "832x624" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "416x312" (unknown reason)
(II) R128(0): Not using default mode "1280x768" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "640x384" (unknown reason)
(II) R128(0): Not using default mode "1280x800" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "640x400" (unknown reason)
(II) R128(0): Not using default mode "1152x768" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "576x384" (unknown reason)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "576x432" (unknown reason)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "700x525" (unknown reason)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "700x525" (unknown reason)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "700x525" (unknown reason)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "700x525" (unknown reason)
(II) R128(0): Not using default mode "1440x900" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "720x450" (unknown reason)
(II) R128(0): Not using default mode "1600x1024" (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "800x512" (unknown reason)
(II) R128(0): Not using default mode "1680x1050" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "840x525" (unknown reason)
(II) R128(0): Not using default mode "1920x1200" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "960x600" (unknown reason)
(II) R128(0): Not using default mode "1920x1200" (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "960x600" (unknown reason)
(II) R128(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "960x720" (unknown reason)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "1024x768" (unknown reason)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "1024x768" (unknown reason)
(II) R128(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode "1024x768" (unknown reason)
(II) R128(0): Not using mode "800x600" (no mode of this name)
(II) R128(0): Not using mode "640x480" (no mode of this name)
(--) R128(0): Virtual size is 1024x768 (pitch 1024)
(**) R128(0):  Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) R128(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(==) R128(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.2.0
	ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
	compiled for 1.4.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) R128(0): Page flipping disabled
(!!) R128(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0x90000000 - 0x90003fff (0x4000) MS[B]
	[1] 0	0	0x94000000 - 0x97ffffff (0x4000000) MS[B]
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0xf5200000 - 0xf53fffff (0x200000) MX[B]E
	[7] -1	0	0xf5000000 - 0xf51fffff (0x200000) MX[B]E
	[8] -1	0	0x80080000 - 0x80080fff (0x1000) MX[B]E
	[9] -1	0	0x80081000 - 0x80081fff (0x1000) MX[B]E
	[10] -1	0	0x80000000 - 0x8007ffff (0x80000) MX[B]E
	[11] -1	0	0xf1000000 - 0xf101ffff (0x20000) MX[B](B)
	[12] -1	0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[13] -1	0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[14] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[15] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[16] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[17] 0	0	0xf0000400 - 0xf00004ff (0x100) IS[B]
	[18] -1	0	0x00000400 - 0x000004ff (0x100) IX[B](B)
	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[21] 0	0	0xf00003b0 - 0xf00003bb (0xc) IS[B](OprU)
	[22] 0	0	0xf00003c0 - 0xf00003df (0x20) IS[B](OprU)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
(II) [drm] loaded kernel module for "r128" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) R128(0): [drm] Using the DRM lock SAREA also for drawables.
(II) R128(0): [drm] framebuffer handle = 0x94000000
(II) R128(0): [drm] added 1 reserved context for kernel
(II) R128(0): X context handle = 0x1
(II) R128(0): [drm] installed DRM signal handler
(II) R128(0): [agp] Mode 0x07000201 [AGP 0x106b/0x0027; Card 0x1002/0x5452]
(II) R128(0): [agp] 8192 kB allocated with handle 0x00000001
(II) R128(0): [agp] ring handle = 0x00000000
(II) R128(0): [agp] Ring mapped at 0x49051000
(II) R128(0): [agp] ring read ptr handle = 0x00101000
(II) R128(0): [agp] Ring read ptr mapped at 0x48024000
(II) R128(0): [agp] vertex/indirect buffers handle = 0x00102000
(II) R128(0): [agp] Vertex/indirect buffers mapped at 0x49152000
(II) R128(0): [agp] AGP texture map handle = 0x00302000
(II) R128(0): [agp] AGP Texture map mapped at 0x49352000
(II) R128(0): [drm] register handle = 0x90000000
(II) R128(0): [dri] Visual configs initialized
(II) R128(0): CCE in BM mode
(II) R128(0): Using 8 MB AGP aperture
(II) R128(0): Using 1 MB for the ring buffer
(II) R128(0): Using 2 MB for vertex/indirect buffers
(II) R128(0): Using 5 MB for AGP textures
(II) R128(0): Memory manager initialized to (0,0) (1024,3072)
(II) R128(0): Reserved area from (0,768) to (1024,770)
(II) R128(0): Largest offscreen area available: 1024 x 2302
(II) R128(0): Reserved back buffer from (0,770) to (1024,1538)
(II) R128(0): Reserved depth buffer from (0,1538) to (1024,2307)
(II) R128(0): Reserved depth span from (0,2306) offset 0x902000
(II) R128(0): Reserved 4096 kb for textures at offset 0xc00000
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Dashed Lines
	Setting up tile and stipple cache:
		20 128x128 slots
		5 256x256 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using hardware cursor (scanline 9228)
(II) R128(0): Largest offscreen area available: 1024 x 763
(**) Option "dpms"
(**) R128(0): DPMS enabled
(II) R128(0): [DRI] installation complete
(II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers
(II) R128(0): [drm] Mapped 128 vertex/indirect buffers
(II) R128(0): [drm] dma control initialized, using IRQ 48
(II) R128(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r128_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(WW) Configured Mouse: No Device specified, looking for one...
(II) Configured Mouse: Setting Device option to "/dev/input/mice"
(--) Configured Mouse: Device: "/dev/input/mice"
(==) Configured Mouse: Protocol: "Auto"
(**) Option "CorePointer"
(**) Configured Mouse: always reports core events
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Configured Mouse: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Generic Keyboard: XkbLayout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) Generic Keyboard: XkbVariant: "nodeadkeys"
(**) Option "XkbOptions" "lv3:lwin_switch"
(**) Generic Keyboard: XkbOptions: "lv3:lwin_switch"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(--) Configured Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(EE) R128(0): R128CCEWaitForIdle: (DEBUG) CCE idle took i = 1025
(EE) R128(0): Idle timed out, resetting engine...
(II) AIGLX: Suspending AIGLX clients for VT switch


--nextPart1744690.DZkT8p0MMh
Content-Type: text/plain; name="xorg.conf"
Content-Transfer-Encoding: 8Bit
Content-Disposition: attachment; filename="xorg.conf"

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"de"
	Option		"XkbVariant"	"nodeadkeys"
	Option		"XkbOptions"	"lv3:lwin_switch"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
	BusID		"PCI:0:10:0"
	Option		"UseFBDev"		"true"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
        Option          "DPMS"
        HorizSync       60-60
        VertRefresh     75-117
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
        DefaultDepth    24

SubSection "Display"
       Depth            1
       Modes            "800x600" "640x480"
EndSubSection
SubSection "Display" 
       Depth            4
       Modes            "800x600" "640x480"
EndSubSection
SubSection "Display"    
       Depth            16
       Modes            "800x600" "640x480"      
EndSubSection
SubSection "Display"
        Depth           24
        Modes           "800x600" "640x480"
EndSubSection
                 
EndSection


--nextPart1744690.DZkT8p0MMh--


--- news://freenews.netfront.net/ - complaints: news@netfront.net ---
0
3/28/2010 6:37:26 PM
comp.os.linux.powerpc 1164 articles. 0 followers. jobhunts02 (107) is leader. Post Follow

1 Replies
2725 Views

Similar Articles

[PageSpeed] 14

On 28 Mar, 20:37, jj <janchristi...@t-online.de> wrote:
> Hi.
> iMac G3 with Debian 5.04 ppc. Console works fine, but the
> font is slightly out of bounds so that half of the command
> line is visible.
> The Gui had the =A0black screen (long known for r128 in G3)
> until the xorg.conf was manipulated according to googled
> advice. Now the gdm screen comes up ok, but freezes after
> login info.
> My current xorg.conf and log are appended.
> Who can help?
> JJ
>

i'd suggest to ask help on DebianPPC ml.
0
ppc.addon (17)
5/1/2010 10:56:07 AM
Reply:

Similar Artilces:

iMac PowerPC G3/500MHz be upgraded to OS X?
A friend has an Apple G3, 500Mhz, 192MB iMac with 28 GB hard drive (27 GB free) running OS 9.2.2 and I would like to upgrade this machine to OS X so that my friend can run Mozilla's FireFox 1.0.3 web browser on this machine. Can I expect such an upgrade to go smoothly? Will this iMac run well and remain stable with OS X?. - Peter In article <SWUbe.12946$Nc.6449@trnddc09>, "Peter" <verizon@petersaleREMOVETHIS.com> wrote: > A friend has an Apple G3, 500Mhz, 192MB iMac with 28 GB hard drive (27 GB > free) running OS 9.2.2 and I would like to upgrade thi...

[News] Reviews of Debian Linux, Elive 0.6.5, BOSS Linux, Ubuntu Feisty Fawn Herd 5
Exploring the Debian Installer ,----[ Quote ] | Debian's installer is actually a single program with three | different front-ends (Text, Newt, and GTK), each of which is | functionally identical, for the most part. With the exception | of creating encrypted partitions - a feature currently only | available through the Newt front-end (see References below) - | each of the front-ends works the same way. `---- http://lxer.com/module/newswire/view/83025/index.html Review: Elive 0.6.5 ,----[ Quote ] | I definitely liked Elive. It is a fully functional distribution based | on the Enlightenme...

Starting over on a g3 imac with Debian GNU/Linux 3.0 installed
Got a free iMac DV from a neighbor. Can't seem to get started with it. It starts up with yaboot version 1.3.6. Following on screen instructions I entered help and pressed the tab key to see what was available. Unfortunately, only Linux was I might want to try Linux at some point but for now I'd like to start off with Mac OS 9.2 and bring it up to OSX 10.4 when I get more memory and a couple of other things done. At any rate, if I let it boot to Linux I eventually get asked for a imac login and password. Sadly, I ain't got 'em and I'm not sure if I'll be ...

Linux newbie: J2EE on Linux/PPC G3 300Mhz?
Hi All. I'm a developer who's previously primarily worked on the Windows/.Net-platform, but now wants to go deeper into Java and Linux. Beeing a Linux-newbie with a left-over 300Mhz PPC Mac, I've decided to try installing MDK 9.1 PPC to get something going. (Well, my wife doesn't like the idea of yet_another_grey_box in the house either... ;-) ) Question is; how much can you do on such a machine? I've found out a bit about the blackdown SDK, but not really how good or bad it is or even its actual features. As far as I've found out it supports v. 1.3; is it possible to develop and deploy J2EE-applications with this SDK? There also *seems* to a compiler from IBM, that supports 1.4.1 (see http://lists.debian.org/debian-powerpc/2004/debian-powerpc-200403/msg00216.html ) but making it work doesn't seem to be a trivial task. Anybody, who has tried doing some serious Java-development on Linux/PPC and have some opinions on the subject? For my purposes, should I rather throw away the ol' Mac and buy a cheap, new (or used) x86? (And risk the peace in the house...) I really appreciate any help on the subject... Best regards, Ken "Ken" <pryce-at-hotmail.com> wrote in message news:<4086d5db$0$429$edfadb0f@dread14.news.tele.dk>... > Hi All. > > I'm a developer who's previously primarily worked on the > Windows/.Net-platform, but now wants to go deeper into Java and Linux. > > Beeing a Linux-newbie...

Debian on iMac G3
Hi Folks Must be a quiet Sunday; this has certainly consumed it whole! I've been running Ubuntu with great results on an old AMD box, so I installed Debian on a 2001 iMac G3 500mhz 256MB today . I downed and burned a basic installer ISO and then installed it, added the desktop and added two users, Root and the regular user. Problem is when I rebooted, screen seemed to be coloured half way and the balance was black; 3 minutes later I got to the log in screen, I entered my user name and 5 minutes later got a Nautilus failed error message (incidentally the errors were presented in what looked like Windows 3.1 dialog boxes...) Any suggestions as to why Nautilus might be failing? Debian was installed over the former OSX install so it's the only OS available and the installation appeared to go well. I've re-installed Debian and attempted to log in twice more and each time Nautilus fails the same way. Thanks in advance! On Sun, 26 Aug 2007 03:47:32 -0700, Alan L <alan.lazarus@gmail.com>, in <1188125252.835439.178190@z24g2000prh.googlegroups.com> wrote: >+ I've re-installed Debian and attempted to log in twice more and each >+ time Nautilus fails the same way. I would try logging in with the failsafe. Look under session to find your failsafe login options. Then take a look at .xsession-errors. There might be other error files, so you may need to use this: find ~/ -iname "*err*" -print -- Consulting Minister for Consultants, ...

[News] OS X 10.5 / Vista / Linux Comparison Reveals Linux Strength
Engadget Comparison (Mended) ,----[ Quote ] | After reading an article on Engadget comparing OS X 10.5 and Windows Vista, I | decided it would be interesting to compare GNU/Linux with them both. `---- http://fophillips.org/?p=24 Related: The Right Operating System for You ,----[ Quote ] | With its minimal hardware requirements and solid security, Linux can | serve as a bulletproof primary OS. And with painless dual-booting | and virtualization options, including several free and open-source | apps and the kernel-based Xen software, you can easily try out the | latest in Linux without ...

[News] Google Targets GNU/Linux With Chrome 5.0, Chrome OS (Linux) Overview
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Google Releases Chrome 5.0.375.86 Stable for Linux ,----[ Quote ] | Just in time for the weekend break, the | Google Chrome developers at Google announced | last evening (June 24th) the stable release | and availability for download of the Google | Chrome 5.0.375.86 web browser for Linux, | Windows and Macintosh platforms. This new | version comes right after the beta release | announced two days ago, which enabled by | default the integrated flash player. Google | Chrome 5.0.375.86 is available for both 32- | bit and 64-bit architecture...

Scilab 5.x cannot get started on my Intel iMac with Mac OS X 10.6.5
Scilab has been working on my various Macs, but Scilab 5.2 and Scilab 5.3 just cannot get started on my Intel iMac with Mac OS X 10.6.5 How can I get Scilab going again? Heinz On 14/11/10 12:35 PM, Znieh Keleiban wrote: > Scilab has been working on my various Macs, but Scilab 5.2 and Scilab > 5.3 just cannot get started on my Intel iMac with Mac OS X 10.6.5 > > How can I get Scilab going again? > > Heinz The specific error messages are shown below (excerpt). Can anybody see what is going wrong? Heinz Process: scilab-bin [1396] Path: /Applications/scilab-5.2.2.app/Contents/MacOS/bin/scilab Identifier: org.scilab.modules.jvm.Scilab Version: ??? (???) Code Type: X86 (Native) Parent Process: sh [1371] Date/Time: 2010-11-14 16:06:49.876 +0100 OS Version: Mac OS X 10.6.5 (10H574) Report Version: 6 Interval Since Last Report: 120544 sec Crashes Since Last Report: 26 Per-App Interval Since Last Report: 40 sec Per-App Crashes Since Last Report: 18 Anonymous UUID: FA59A36E-2928-43F0-B9B1-CD9411CE78EE Exception Type: EXC_BAD_ACCESS (SIGBUS) Exception Codes: KERN_PROTECTION_FAILURE at 0x000000000000000c Crashed Thread: 1 Application Specific Information: Java information: Exception type: Bus Error (0xa) at pc=00000000027b9d52 Java VM: Java HotSpot(TM) Client VM (17.1-b03-307 mixed mode macosx-x86) Current threa...

OS 3.5 application compatibility with OS 5
I want to get a new palm pilot. But i've heard that not all applications for os 3.5 (or others) will work with OS 5 This is terrible, im not going to get a OS 5 if only half of my current applications work! can someone give me some info on this? is it only a few applications? In article <1143077981.263753.196860@g10g2000cwb.googlegroups.com>, williams.davidmw@gmail.com wrote: > I want to get a new palm pilot. > But i've heard that not all applications for os 3.5 (or others) > will work with OS 5 > > This is terrible, im not going to get a OS...

Scilab 5.1.1. does not open on iMac G5 running Mac OS X 10.5.6
Hi there, Scilab 5.1.1. (and even 5.1) does not open up. When I double click on scilab 5.1.1 in the Applications folder, the "Scilab bird" appears in the dock, which then soon transforms into a paper with a cup. Nothing happens after that! I have to force quit it. I simply ran scilab-bin under the MacOS of the package. I get the following error message dyld: Library not loaded: /Users/pmarecha/compilation_chain_macosx/ sci_binary/scilab-5.1.1-alpha-1.app/Contents/MacOS/lib/scilab/ libscilab.0.dylib Referenced from: /Applications/scilab-5.1.1-alpha-1.app/Contents/ MacOS/bin/./scilab-bin Reason: image not found I am not sure if the above alone is a problem or if there is an additional problem due to Java. I have Java installed. Running java - version yields java version "1.5.0_16" Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_16- b06-284) Java HotSpot(TM) Client VM (build 1.5.0_16-133, mixed mode, sharing) Any insight would be really helpful! I am running Mac OS X 10.5.6 Thanks in advance best regards Arun In article <a6fbd1c6-69e3-4426-9ad0-199d7a22726d@c18g2000prh.googlegroups.com>, arun.kt@gmail.com <arun.kt@gmail.com> wrote: >Hi there, > >Scilab 5.1.1. (and even 5.1) does not open up. When I double click on >scilab 5.1.1 in the Applications folder, the "Scilab bird" appears in >the dock, which then soon transforms into a paper with a cup. Nothing >...

OS X on a IMAC G3
I recently installed OS X on my G3 (333Mhz, 128MR RAM, 6 Gb HDD). The install went smooth as silk. The machines boots into OS X with no problem. The problem I have is with the "utilities" in the "applications" folder. The "disk copy" gives an invalid checksum with every .dmg file I try to install. If I try to drag the .dmg file in to the "applications" to install it says I do not have permisson to change the applications folder. I have read in some forums that this would normally mean it was a bad download. The invalid checksum error message said someth...

Debian + GUI on iBook G3
I've gotten Debian (Woody) installed on an iBook G3 so that the basic system is up and running and I can add packages from the net via apt-get. Now, how do I get X working so I can run Fluxbox or KDM? I tried using 'tasksel' to set up X, but currently I get "no screens found" - what's missing? I'm fairly comfortable setting up debian as a server on several architectures and have setup debian workstations on a few Intel machines, but have run into these hurdles setting up the iBook (G3) as a workstation with X and all. Also, two other questions: How do I set up power management to allow the machine to go to sleep? How do I set up the wireless card (AirPort) ? Any tips, ideas or solutions welcome, -- Lars The Internet is for Everyone: http://www.ietf.org/rfc/rfc3271.txt?number=3271 On Thu, 07 Oct 2004 11:15:47 +0000, lars@nospam.nosoftwarepatents.edu wrote in <Dz99d.628$tM3.107@news.itd.umich.edu>: > I've gotten Debian (Woody) installed on an iBook G3 so that > the basic system is up and running and I can add packages > from the net via apt-get. > > Now, how do I get X working so I can run Fluxbox or KDM? This may be very stupid advice, but I'm using Ubuntu Linux which is Debian-based, but automatically sets up X. You might be interested in trying that. It's still pre-release but gone from nothing to lots of activity in less than a month, and it works pretty good. -- Kind regards, Mi...

[News] Linux Author Interview; Linux in a Nutshell Gets 5 Out of 5
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 ROSE Blog Interviews: Juliet Kemp, author and admin extraordinaire ,----[ Quote ] | A: I'm Juliet Kemp; I'm a sysadmin and | freelance writer on Linux. I've been using FOSS | for getting on for a decade now, and working as | a sysadmin for nearly as long. I recently wrote | a book of Linux systems administration tips – | Linux System Administration Recipes: A Problem- | Solution Approach – and write regularly for | http://serverwatch.com, | http://www.linuxplanet.com, and Linux Format. `---- http://www.linux-magazine.com/Onli...

Upgrade palm os 3.5 to palm os 5.4
Hi there can anyone help me out as to how do i upgrade palm os 3.5 to palm os 5.4. Also can anyone tell me where to find the HotSync Manager 3.1.1. On Thursday 02 of February 2006 09:39 loki wrote: > Hi there can anyone help me out as to how do i upgrade palm os 3.5 to > palm os 5.4. You can't. -- Life is a beach and then you dive... Marcin On 2006-02-02, loki <lokimetalhead@gmail.com> wrote: > Hi there can anyone help me out as to how do i upgrade palm os 3.5 to > palm os 5.4. You can't. Palm OS 5.x only runs on Palms with ARM CPUs. And P...

[ace-users] ACE VERSION: 5.6.8 HOST MACHINE and OPERATING SYSTEM: Linux Debian on x86 COMPILER NAME AND VERSION (AND PATCHLEVEL): g++-4.1.2 THE $ACE_ROOT/ace/config.h: config-linux.h THE $ACE_ROOT/inc
This is a multipart message in MIME format. --=_alternative 004800E0C1257577_= Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: quoted-printable ACE VERSION: 5.6.8 HOST MACHINE and OPERATING SYSTEM: Linux Debian on x86 COMPILER NAME AND VERSION (AND PATCHLEVEL):=20 g++-4.1.2 THE $ACE=5FROOT/ace/config.h: config-linux.h THE $ACE=5FROOT/include/makeinclude/platform=5Fmacros.GNU FILE: platform=5Flinux.GNU CONTENTS OF $ACE=5FROOT/bin/MakeProjectCreator/config/default.features (unmodified): AREA/CLASS/EXAMPLE AFFECTED: Signal DOES THE PROBLEM AFFECT: EXECUTION? YES=20 I've a client/server application, and sometime when a client is=20 disconnected i get a SIGPIPE signal, this is the following stack trace. Program received signal SIGPIPE, Broken pipe. [Switching to Thread 182915886656 (LWP 4637)] 0x0000003f0e50b10f in =5F=5Fwrite=5Fnocancel () from /lib64/tls/libpthread.= so.0 (gdb) bt #0 0x0000003f0e50b10f in =5F=5Fwrite=5Fnocancel () from=20 /lib64/tls/libpthread.so.0 #1 0x0000002a95a7d54d in ACE::send (handle=3D24, buf=3D0x2ad3b30010, n=3D8= 5,=20 timeout=3DVariable "timeout" is not available. ) at ../../ace/OS=5FNS=5Funistd.inl:1163 #2 0x000000000043db02 in ACE=5FSOCK=5FIO::send (this=3D0x7352cd4,=20 buf=3D0x2ad3b30010, len=3D85, timeout=3D0x7fbfffe6f0) at /home/jvennin/projects/libraries/ace/include/ace/SOCK=5FIO.inl:96 #3 0x000000000043fb19 in Cfm::...

scratch install linux on G3 iMac
I want to learn PowerPC assembler programming on an iMac G3 ( OS 9.2 ) I just bought thru ebay. The plan being to install Debian Linux for PPC in a partition on the iMac and have at it. But the iMac does not have the system CD, so I dont have the Drive Setup software needed to create a 2nd partition. Is it possible to do a scratch install of Linux on an iMac? thanks, -Steve In article <7b73919b.0409220420.73953e21@posting.google.com>, srichter@autocoder.com (Steve Richter) wrote: > I want to learn PowerPC assembler programming on an iMac G3 ( OS 9.2 ) > I just bought thru e...

[News] Making Linux More Like OS X and OS X More Like Linux
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Mac OS X - Highly Customized Linux ,----[ Quote ] | Few players in the Linux arena creates their Linux distro to look like Mac OS | X or Windows.... | | Here I'm going to list some distro which looks like Mac OS. `---- http://linuxtreat.blogspot.com/2008/07/mac-os-x-highly-customized-linux.html A Linux User's Guide to Mac ,----[ Quote ] | Take a deep breath and repeat after me: A computer is just a tool. It is only | so good as it serves to make life better for users. A "better" life is | obviously not the same thing for everyone. For me, it means making my Mac | more like Linux, as I began to discuss in my last article. `---- http://www.ofb.biz/safari/article/474.html Yesterday: Ubuntu: Challenge the Mac ,----[ Quote ] | Normally I would just provide a Diigo link to this if it weren’t something | I’ve been saying a lot in talks. Over at InformationWeek, Serdar Yegulaip was | a piece called “Shuttleworth’s Ubuntu Ambitions: Challenge the Mac”. He | quotes Mark Shuttleworth saying in a Datamation article: | |     … our goal, very simply, is to make sure the Free software ecosystem can |     deliver a Mac OS-like experience, or an experience that will compete with |     the Mac OS. | | I think this is exactly right. It’s time to look past Windows, even with its | huge installed base, as any sort of “gold standard” (as Mark calls it), | especially for user interface. ...

debian install on an old imac G3
Hello, I want to install debian etch on my old imac g3 but the genuine CD reader is dead. How can I boot on the debian DVD with an external USB DVD-Reader ? I tried to boot with "alt" key on, but I don't see the DVD, only the HD ... Thanks for the help ! In article <fm6c96$34r$1@news.tiscali.fr>, a wrote: > Hello, > > I want to install debian etch on my old imac g3 but the genuine CD reader > is dead. How can I boot on the debian DVD with an external USB DVD-Reader ? > I tried to boot with "alt" key on, but I don't see the DVD, only the HD ... > > Thanks for the help ! Try this: Right after the bong hold down the OPTion key, hold it down until you see a graphics screen pop up that scans the computer for all bootable drives. Place your DVD/CD in the external drive first. then when the watch icon disappears, its checking all busses for any bootable devices, click on the CD disk icon (it will show a penquin, most likely, I believe) after you select it select the right arrow below the icons and it should boot right off of your firewire/USB drive. Thats how I boot my thumb drive and I am quite sure the DVD drive will appear the same way. -- From the Desk of the Sysop of: Planet Maca's Opus, a Free open BBS system. telnet://pinkrose.dhis.org Web Site: http://pinkrose.dhis.org, Dialup 860-618-3091 300-33600 bps The New Cnews maintainer B'ichela Le Fri, 11 Jan 2008 20:45:53 +0000, B'ichel...

Imac G3 OS 8.6
ok, so i bought this g3 right? i take it home, and everything's swell..until i try to connect it via ethernet..and it wont connect. then again, im used to windows plug and play utility for cables and such...so anyway, i keep fooling around and stuff..then it freezes. i restart it, and thanks to mac's glorious decision to keep up the same screen you had when you turned it off, its frozen...constantly....so first, i need help with the unfreezing process....then i need help via ethernet....so any help would be appreciated. In article <1160882780.214688.65080@b28g2000cwb.googlegroups....

GUI issues, Linux and OS X
Love how the herd, when faced with the GUI issues of Linux and having a comparison made to the competition, all but ignore the fact that both the KDE and GNOME teams have directly stated as main goals what they want and are both failing, but also try to misdirect and point to how you *can*, on OS X, make things get wonky if you use X11... a system almost nobody on OS X uses and is AN OPEN SOURCE PROJECT. LOL! So the best the herd can do to defend the mess the UI the open source community has created on desktop Linux is to redirect to the mess that the open source community has create...

libslang1-dev DESCONTINUED in Debian 5
Amigos, Tenho uma aplica=E7=E3o de PDV devidamente funcionando no Windows, compilada com xHarbour 1.0.0 e BCC 5.5.1. Meu chefe agora precisa que eu coloque o PDV para rodar nas esta=E7=F5es Linux da empresa (Debian 5). Pedi ajuda =E0 area de experts em Linux daqui da empresa e percebi que o xHarbour usa uma LIB do Debian 4, que foi DESCONTINUADA na Debian 5. Como fa=E7o para fazer isso chegar aos ouvidos dos desenvolvedores do xHarbour? Eu baixei o SOURCE CODE do www.xharbour. org. Sen=E3o vou ter que experimentar outra ferramenta para o Debian 5, como o Clip, Flagship ou Harbour, desde que c...

Debian on G3 upgraded PPC 8500
Hi, I'm a newbie who's just managed to install Debian 3.1 on an Old-World PCI PPC 8500. All I've managed so far is a command-line interface. For some reason, Gnome Display Manager is unable to run - error message indicating that the Xserver is unable to run, apparently not recognizing the display device. I would appreciate any advice as to how I can, if at all possible, boot into the GUI (X Windows?). My system setup: PCI PowerPC 8500 upgraded with 500Mhz G3 daughter card 128MB RAM 2 x 4 gig hard drives, with one dedicated for Debian. Running OS 9.2 and using BootX Bootloader 15" Compaq CRT monitor (with adapter) Kensingnton 4-button ADB Mouse YF In article <yinfui-A292CE.17501604072006@news-vip.optusnet.com.au>, YF Yong <yinfui@optusnet.com.au> wrote: >Hi, > >I'm a newbie who's just managed to install Debian 3.1 on an Old-World >PCI PPC 8500. All I've managed so far is a command-line interface. For >some reason, Gnome Display Manager is unable to run - error message >indicating that the Xserver is unable to run, apparently not recognizing >the display device. I would appreciate any advice as to how I can, if at >all possible, boot into the GUI (X Windows?). > >My system setup: > >PCI PowerPC 8500 upgraded with 500Mhz G3 daughter card >128MB RAM >2 x 4 gig hard drives, with one dedicated for Debian. >Running OS 9.2 and using BootX Bootloader >15" Compaq CRT monitor (...

Debian on G3 upgraded PPC 8500
Hi, I'm a newbie who's just managed to install Debian 3.1 on an Old-World PCI PPC 8500. All I've managed so far is a command-line interface. For some reason, Gnome Display Manager is unable to run - error message indicating that the Xserver is unable to run, apparently not recognizing the display device. I would appreciate any advice as to how I can, if at all possible, boot into the GUI (X Windows?). My system setup: PCI PowerPC 8500 upgraded with 500Mhz G3 daughter card 128MB RAM 2 x 4 gig hard drives, with one dedicated for Debian. Running OS 9.2 and using BootX Bootloader 15" Compaq CRT monitor (with adapter) Kensingnton 4-button ADB Mouse YF "YF Yong" <yinfui@optusnet.com.au> wrote in message news:yinfui-E5B622.18013204072006@news-vip.optusnet.com.au... > Hi, > > I'm a newbie who's just managed to install Debian 3.1 on an Old-World > PCI PPC 8500. All I've managed so far is a command-line interface. For > some reason, Gnome Display Manager is unable to run - error message > indicating that the Xserver is unable to run, apparently not recognizing > the display device. I would appreciate any advice as to how I can, if at > all possible, boot into the GUI (X Windows?). > > My system setup: > > PCI PowerPC 8500 upgraded with 500Mhz G3 daughter card > 128MB RAM > 2 x 4 gig hard drives, with one dedicated for Debian. > Running OS 9.2 and u...

wpa_supplicant,linux.debian.ports.powerpc
Hello. Did someone of you guys built a wpa_supplicant for Aiport/hermes? There is a hermes source but made for 2.4 kernels. http://forums.gentoo.org/viewtopic-t-247191.html The gentoo people can't help me. Paolo ...

Web resources about - iMac G3 debian 5 ppc gui - comp.os.linux.powerpc

Debian - Wikipedia, the free encyclopedia
Debian ( / ˈ d ɛ b i ə n / ) is the name for a Linux distribution that is composed primarily of free and open-source software , most of which ...

Debian - Wikipedia, the free encyclopedia
Debian ( / ˈ d ɛ b i ə n / ) is an operating system composed of free software mostly carrying the GNU General Public License , and developed ...

Debian The Universal Operating System
Debian is an operating system and a distribution of Free Software. It is maintained and updated through the work of many users who volunteer ...

Planet Debian
Conrad releaser version 3.2.3 of Armadillo a few days ago, and the corresponding RcppArmadillo package 0.3.2.3 is now CRAN . (Forthese keeping ...

Debian GNU/Linux Debian Pure Blends
Debian Pure Blends A Debian Pure Blend (in short Blend if used in clearly Debian internal context)is a subset of Debian that is configured tosupport ...

Debian Mailing Lists Index
If you wish to browse a complete list of mailing lists, see the complete index . To subscribe to or unsubscribe frommultiple mailing lists at ...

Debian Packages
To report a problem with the web site, e-mail debian-www@lists.debian.org . For other contact information, see the Debian contact page . Web ...

Debian Security Information
Debian takes security very seriously. We handle all security problemsbrought to our attention and ensure that they are corrected withina reasonable ...

FrontPage - Debian Wiki
Wiki Login FrontPage RecentChanges FindPage HelpContents Search: Wiki / Immutable Page Comments Info Attachments More Actions: Raw Text Print ...

The Debian Project (@debian) on Twitter
Log in Sign up You are on Twitter Mobile because you are using an old version of Internet Explorer. Learn more here The Debian Project @ debian ...

Resources last updated: 3/10/2016 4:27:54 PM