f



Toshiba 3500 Tablet, Redhat 9 and external USB drives (CDROM & Maxtor Toshiba 3500 Tablet, Redhat 9 and external USB drives (CDROM & MaxtorOne-Touch harddrive)

I'm running Redhat 9 linux on my Toshiba 3500 tablet. Besides the fact
that the IR , MM/SD, and the digitizer/pen aren't working, now the
laptop will drop the usb connection after a couple minutes of reading
files from it. Attempting to remount the partitition (after a umount)
results in an invalid device error.  The error is repeated whether I
use kernel 2.4.20-8, 2.4.20-27.9, 2.4.20-28.9, or a custom kernel. 
Any suggestions?                                                      
                                                                    
dmesg excerpts follow.

Linux version 2.4.20-27.9 (bhcompile@porky.devel.redhat.com) (gcc
version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Dec
11 13:22:41 EST 2003
---(STUFF DELETED)---
Kernel command line: ro root=LABEL=/ acpi=off
---(STUFF DELETED)---
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 11 for device 00:0c.0
PCI: Sharing IRQ 11 with 00:11.1
usb-ohci.c: USB OHCI at membase 0xdf84a000, IRQ 11
usb-ohci.c: usb-00:0c.0, NEC Corporation USB
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Enabling device 00:0c.1 (0000 -> 0002)
PCI: Found IRQ 11 for device 00:0c.1
PCI: Sharing IRQ 11 with 00:10.0
PCI: Sharing IRQ 11 with 01:00.0
usb-ohci.c: USB OHCI at membase 0xdf84c000, IRQ 11
usb-ohci.c: usb-00:0c.1, NEC Corporation USB (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Enabling device 00:0c.2 (0000 -> 0002)
PCI: Found IRQ 11 for device 00:0c.2
PCI: Sharing IRQ 11 with 00:0a.0
ehci-hcd 00:0c.2: NEC Corporation USB 2.0
ehci-hcd 00:0c.2: irq 11, pci mem df854000
usb.c: new USB bus registered, assigned bus number 3
PCI: 00:0c.2 PCI cache line size set incorrectly (32 bytes) by
BIOS/FW.
PCI: 00:0c.2 PCI cache line size corrected to 128.
ehci-hcd 00:0c.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jan-22
hub.c: USB hub found
hub.c: 5 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
---(STUFF DELETED)---
hub.c: new USB device 00:0c.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0xd49/0x7010) is not claimed by any
active driver.
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: Maxtor    Model: OneTouch          Rev: 0200
  Type:   Direct-Access                      ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
---(STUFF DELETED)---
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 240119808 512-byte hdwr sectors (122941 MB)
 sda: sda1 sda2 sda3
hub.c: USB device not accepting new address (error=-71)
usb-storage: host_reset() requested but not implemented
scsi: device set offline - command error recover failed: host 0
channel 0 id 0 lun 0
SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 6070000
 I/O error: dev 08:01, sector 49112600
 I/O error: dev 08:01, sector 49112608
 I/O error: dev 08:01, sector 49112848
 I/O error: dev 08:01, sector 49112600
0
abeeku
1/13/2004 4:45:47 AM
comp.os.linux.redhat 3518 articles. 0 followers. Post Follow

0 Replies
634 Views

Similar Articles

[PageSpeed] 10

Reply: