Accessing windows 7 share from Solaris using "windows network (smb)"
Help needed! I can not successfully login to Windows 7 box from
Solaris 10 (Sparc). I can see the windows box from Network Places in
Solaris 10. The problem starts when I try to login. The usrname/
passwd keeps failing. I am using the the same usrname/passwd that I
use to login to the windows 7 box locally. What I am I doing wrong
here? Any/All suggestions are welcomed!! Thanks in advance.
In article <email@example.com>,
Solarys <firstname.lastname@example.org> wrote:
>Help needed! I can not successfully login to Windows 7 box ...Home network "specified network name no longer available"
I have a win98SE desktop system and Win2K laptop. I have a Netgear
wireless router and Netgear wireless card in the laptop. I can browse
folders on the desktop. Last week, I created 2 folders on the desktop
hd from the laptop. One folder is accessible. The other says
"specified network name no longer available" when I try to browse it.
I can open the folder from the desktop system. I created a new folder
on the desktop system and can see the files in it. I still can't
access it from the laptop. The folder has about 8 files totalling 150
MB, both smaller than other folders I can o...configuring "named" to provide DNS for Windows home network clients?
I configured named successfully on my Linux box because I use Verizon
DSL, and their DNS servers can take almost a full minute to respond to a
single request during peak hours.
So now the machine it's running on is much, much faster for internet
I understand that named is a caching nameserver but where is the cache
stored? In RAM or the hard drive?
And how do I get my wife's Windoze machine to use my Linux box as her
primary DNS server? I added the IP address of my Linux machine to the
top her Win2K DNS server list but I don't know how to tell from a
windows si...Networking with windows network
Hi, have two different machines connected to windows network. The OS/2
machines are essentially identical. I have installed fixpax 15, WR_8423,
WR_8425, and IP_8414. I have settings for ibmlan.ini and protocol.ini the
same on both machines. Both machines have a folder shared with the same
permissions. When I connect to machine1 via the windows network, I am
prompted to enter user name and password - which I do and all works fine.
When I connect to Machine2 I get no prompt for username and password and a
lt of times I get the blasted too many connections error.
Where else can I look to...removing a wireless network from "remembered" networks
I hope this is a quick, and easy question. My Powerbook remembers my
work wireless network. Unfortunatly, right now it isn't working. It
gets an IP address, and it shows data passing to and from it, but you
can't ping anything, nor access anything. I've assigned it a unique IP
address (I'm the network admin) but it still don't talk. I'm new to
Macs, and this is the only one I've got to experiment with. I simply
want to delete the information associated with that one wireless
network, without interfering with the saved information for the two
...windows 2000 and windows xp networking problem with athentication
i am trying to do a peer to peer with a windows 2000 machine and a xp
corp machine. i can see the machines in my network places, but when i
try to connect to the xp machine it ask for username and password, we
have usernames and passwords set up for both machines , they are the
same ones we use to log onto our own machines. they both have admin
rights. when we put in the username and password and hit ok it just
ask for it again and doesnt connect..we are both connected to a router
for my cable connection..the firewall allows acces from our ip's..any
email@example.com ...Centos XP windows network DHCP DNS Zonealarm Conflicts -> can talk linux to windows network OR www not both
Windows XPSP2 Zonealarm Firewall
Standard Windows workgroup.
Router with DHCP server.
Set centos for DHCP Zonealarm off System works.
Turn on Zonealarm on XP, Centos is blocked from
contacting XP. Put Centos IP address into Zonealarm
trusted zone. Everything works...until reboot when
Centos gets a new IP. Don't know how to give Centos
a traditional windows workgroup hostname that I can
put into Zonealarm...no problem, just use fixed IP
Bug in Centos 5.1: Fixed IP address fails to setup
DNS. So, now I can't connect to the web.
Is there a workaround to make all...Networking RISC PC to Windows XP Network
Can anyone help me with the simplest step by step simple word instructions
to enable me to network my Acorn RISC PC running RISCOS 4.02 to a Windows XP
network. I want to transfer files between both machines. I would also like
to connect my Acorn thru this network to my Broadband Internet. On the RISC
PC I have SmbServer 0.07 installed but not set up along with LanMan98. Is it
possible to do all these things and can a rather slow person configure the
machines to work?
John Ealey wrote:
> Can anyone help me with the simplest step by step simple word instructions
...How to migrate an application from "VisualWorks/Windows NT" --> "VisualWorks/Windows XP" ?
We developped a big application (1995-2002) with
"VisualWorks(R), Release 2.5.2 of September 26, 1995
Copyright (C) 1995 ParcPlace-Digitalk, Inc. All Rights Reserved.
Version Id: #[25 26 47 9 25 0 0 0 25 26 47 13]
CScanner Release 2.5
DLL and C Connect-VW2.5
DLL and C Connect-VW2.5
we have to migrate our application to "Windows XP".
When we start the application with "Windows XP" + "..."Network Write Error" with winME and winXP network
The BSOD then says " you have no space available on the server"
The winME client had no problems untill yesterday with accessing the
winXP Pro machine and there is plenty of room available.
We tried rebooting and that didn't help. Open to suggestions (aside
from getting rid of winME)
..."No network provider accepted the given network path"
"No network provider accepted the given network path"
My configuration :
- 1 PC XP Pro, ip=192.168.2.2 connected using 802.11b
- 1 PC WS2003, ip=192.168.2.3 connected using ethernet 100Mb
- 1 Belkin F5D7630-4A ADSL router
- Latest service packs and updates are installed on both machines
- The DHCP server of the router is on
- The Local Domain Name server of the router is set to � Belkin �
- On both PCs I have: TCP/IP set to
'Obtain an IP address automatically' and
'Obtain DNS server adress automatically'
My problem is:
- On the XP Pro PC ...Is it possible to create "network conneciton" on windows system?
one of my PC is window system, and in "control panel -> Network
Connections", I can see some network connections such as PPPOE or VPN
which I created by click "create a new connection".
My question is, is it possible to create a new connection by using
Python script? which means I do not want to use Window UI (via
"control panel"), if it is possible, I can save so many time to
create various network connection when I want to do testing in the
Thanks very much.
> one of my PC is window system, and in "c...Windows XP Pro/Home Networking Problem
I have 3 PCs (2 desktops and 1 laptop) connected through a router to the
internet. I have also successfully connected them together by way of the
workgroup function. Each of these PCs is shown on the others.
The problem is: From either the 2 desktops I cannot access the Shared
Documents folder on the laptop. While, the Shared Documents folders on the
desktops can be accessed from the others.
The 2 desktops run Windows XP Home and the laptop runs Windows XP
Would appreciate it very much if any one can give me advice on this.
Thanks & regards,
What is the error m...