Must be the fault of the Scsi0108 (6/27/2003 1:51:06 PM) Please help. Not too long ago I changed from 98 to 2000. All was well except I had some trouble with my Kyocera printer and my Film Scanner a Canon FS 2710. I sorted it eventually and thought really well of my... borge
Magtape389 (6/26/2003 11:20:19 AM) No SCSI problem, but this seems to be the least-unappropriate NG. I got my dirty hands on a 7 track drive from Pertec. Originally, it was a 9 track drive, model 6840-9-25 The drive has been refitted with a 7 t... Nico
tekram dc390u3w and list of device1116 (6/24/2003 8:19:00 PM) Hi, When the bios of the card list the device, some device have an "*". What does it mean ? Thanks Benoit ... Benoit
lilo & tekram dc390u3w282 (6/24/2003 7:35:43 PM) Hi, I install a tekram dc390u3w (and I have a dc390f too). My config: - 1 tekram DC390F channel 0 (first at boot because CD) -> 1 DVDRom -> 1 CDRW -> ... Benoit
Mylex-Support1112 (6/25/2003 9:19:11 PM) Hello NG! Does anyone know were I can find Support for MYLEX-products? The known sites (www.mylex.com and www.mylex.de) seems to be "offline". Thanks to all. Uwe Freikamp Ing.-B�ro DaTeCom e.K. ... news
Driver Needed181 (6/25/2003 1:26:01 PM) Could someone please HELP I am in urgent need of a driver for a "Digital" Tape Drive Backup Model No- TLZ6L-DA Thanks Guys Dave ... David
Infortrend 3102 setup problems.0113 (6/25/2003 1:32:13 PM) I have an Infortrend 3102 RAID array connected to a Sun Ultra60 running Solaris 8. Inside the RAID array I have 7 physical SCSI drives. From these, I've created 1 RAID 5 configuration, 1 RAID 1 configuration,... charlie3629(6)
Does anyone know how to bring a down drive up in Adaptec Raid?0114 (6/25/2003 3:58:07 AM) I used Adaptec AAA-UDMA raid with 3 disks under raid 5. After a power supply problem, there was one hard disk dead and the status of another disk down. Only one disk status is OK. Does anyone know how to br... kenpeng1972
SC875 booting from CD081 (6/24/2003 1:30:43 PM) I have an old system with 2 SCSI CDROMS and an SC875 controller with bios 4.16. When I had a SCSI hd installed and the MB BIOS set to boot SCSI first. it used to boot not only from the HD, but from either CD if... Lenster