Last status 0x00000107 of a hard disk2345 (12/14/2010 9:37:27 PM) Hi,
I have two Seagate ST318406LW on ICP GDT6113RS controller in RAID-1.
Today the controller started to beep. Looking at the hard drive
information, one disk shows last staus 0x00000107. What does this me... Plamen
SATA to SCSI converter5112 (10/4/2007 10:25:17 AM) I was searching around online and found some converters that convert SATA drives to use on SCSI Controller. It says SATA to SCSI U160... I was wondering if anyone had used these.. they are around 100.00 and p... Todd
Seagate ST-3655 family problem7153 (8/10/2010 10:21:39 AM) Some legacy SCSI hard disks of the Seagate ST-3655 family have to have their
data transferred to a modern medium.
The PCI interface card used is an Adaptec AHA-2950U2W installed in a Windows
Roland synth to hard-drive connection .5188 (8/5/2010 9:06:36 AM) I have a VP9000 Roland synth .
It has two connectors for a scsi hard-drive .
One is a 25pin female D socket , labelled ' scsi A ' .
The other is a female 50 'pin' Centronics , labelled ' scsi B' .
All I ne... fffcj(1)
HELP : how should an Implicit ALUA system respond to an STPG?2288 (7/20/2010 10:13:15 PM) hola ffolks:
i looked everywhere online as well as in SPC-3 from T10/T11. fyi, T10
has now restricted access to T10 drafts for members only. i found
the same drafts are available from T11. 8-) ^Googl... ArystorAaron
Is SCSI dead in the desktop?10173 (5/13/2010 9:54:49 PM) I just picked up two Fujitsu 15k 36GB drives for $20 each. The
performance is so much better than any IDE or ATA drive I have ever
seen, but alas, SCSI in the desktop seems to be a losing argument when
I need a SEAGATE BARRACUDA ST19171WC!!!490 (7/15/2007 10:06:17 PM) Hello, my lovely Hard Disk Seagate Barracda ST19171WC 9.1 GB capacity 80 pin connector went burn... So I need to replace the Electronic Part in order to rescue all the data inside as the mechanic part is OK. ... castaway(1)
2 Computers and 1 SCSI-HD-Device14148 (2/18/2010 10:45:02 AM) Hello NG,
I have a 19" External HD-System with LVD connection. I hooked it up to 2
computers in wich the internal scsi-controler (Adaptec LVD) have the ID 6
and 7. The HD-bay is set to 1. None of the compu... Jacob