f



KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #2

I have seen several emails from different people over the last few
months on trying to get KRB5 1.5 or later to compile on AIX 5.x.  And no
responses that fix the problem.  I have had the same problem and can
only presume that Kerberos is no longer supported on AIX.  Is this the
case?  No Kerberos on AIX?  It just won't compile anymore with the
changes to shared libraries.


________________________________________________
Kerberos mailing list           Kerberos@mit.edu
https://mailman.mit.edu/mailman/listinfo/kerberos

0
1/30/2007 8:03:26 PM
comp.protocols.kerberos 5541 articles. 1 followers. jwinius (31) is leader. Post Follow

1 Replies
726 Views

Similar Articles

[PageSpeed] 55

>>>>> "Grant," == Grant, Martin <Martin.Grant@fmr.com> writes:

    Grant,> I have seen several emails from different people over the
    Grant,> last few months on trying to get KRB5 1.5 or later to
    Grant,> compile on AIX 5.x.  And no responses that fix the
    Grant,> problem.  I have had the same problem and can only presume
    Grant,> that Kerberos is no longer supported on AIX.  Is this the
    Grant,> case?  No Kerberos on AIX?  It just won't compile anymore
    Grant,> with the changes to shared libraries.

We no longer run AIX tests.  Our donated AIX box was very old and
slow, and its disk was in the process of dieing.

If there's no one out there in the Kerberos development community who
cares enough about AIX to get the betas, test them and send bug fixes,
then yes, AIX support is going to be fairly bad.

Kerberos is an open-source product; if you want it to work better on
your platform, you can do the work to make that happen or you can pay
someone to do that work for you.

Sam Hartman
Manager, MIT Kerberos Team

________________________________________________
Kerberos mailing list           Kerberos@mit.edu
https://mailman.mit.edu/mailman/listinfo/kerberos

0
hartmans (370)
1/31/2007 2:54:24 AM
Reply:

Similar Artilces:

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #2
Exact same errors specifying --without-tcl. I removed the config.cache, config.log, and etc the reran configure. From my configure line - ../configure --prefix=/usr/local/kerberos --enable-dns-for-realm --without-tcl --with-vague-errors Then after make... making all in lib/rpc/unit-test... Target "all" is up to date. cc -I../../../include -I./../../../include -I. -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1 -g -qhalt=e -O _THREAD_SAFE -c client.c cc -I../../../include -I./../../../include -I. -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1 -g -qhalt=e -O _THREAD_SAFE -c rpc_test_clnt.c cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -g -qhalt=e -O -D_THREAD_SAFE -o c nt client.o rpc_test_clnt.o -lgssrpc -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): A file or directory in the path name does not exist. make: 1254-004 The error code from the last command is 255. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. Any ot...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #5
Phil, Tested on AIX 5.3 TL05 SP4 with XLC++/XLC 8.0 and worked great ! I will be testing on AIX 5.2 TL09 SP3 and AIX 4.3 ML11 here shortly... Thanks for getting this figured out ! Also, appreciate the help from Sam and Martin who were working on it too... Lamar -----Original Message----- From: Phil Pishioneri [mailto:pgp@psu.edu] Sent: Wednesday, February 07, 2007 6:35 PM To: Saxon, Lamar Cc: kerberos@mit.edu Subject: Re: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 I've gotten 1.5.x and 1.6 to build and run on AIX 5.2 (domain referral in 1.6 works nicely). So far I have only tested the client commands: klist, kvno, kinit, kdestroy. No 3rd party software tested yet, either. This was done with the IBM VisualAge C++ Professional / C for AIX Compiler, Version 6. The one major change: add LDFLAGS="-brtl" to configure. My configure line was (prefix edited): ./configure --without-krb4 --prefix=... CC=cc LDFLAGS=-brtl There was one problem during the 1.{5,6} builds (1.5 has a bug that's been documented already), it failed in making all in plugins/kdb/db2/libdb2/test... with ld: 0706-006 Cannot find or open library file: -l db ld:open(): A file or directory in the path name does not exist. my quick&dirty fix for that was (starting in .../krb5-1.6/src/): cd lib ln -s ../plugins/kdb/db2/libdb2/libdb.so.1.1 libdb.so.1.1 ln -s libdb.so.1.1 libdb.so -Phil Privileged and Confidential. This e-mail, and any attac...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #6
Wasn't really the solution I came up with; but it worked. You might be correct since now the OpenSSL binaries will not build against the Kerberos libraries currently. libssl and libcrypto build fine along with everything else; but the actual openssl binary fails. Phil, Have you successfully linked OpenSSL with the new Kerberos libraries ? Thanks, Lamar -----Original Message----- From: Sam Hartman [mailto:hartmans@mit.edu] Sent: Friday, February 09, 2007 10:18 AM To: Saxon, Lamar Cc: pgp@psu.edu; kerberos@MIT.EDU Subject: Re: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 Do you really want rtl as a linker flag? Isn't that going to be an issue for people linking against the kerberos libraries. Why is that the right solution? Privileged and Confidential. This e-mail, and any attachments there to, is intended only for use by the addressee(s) named herein and may contain privileged or confidential information. If you have received this e-mail in error, please notify me immediately by a return e-mail and delete this e-mail. You are hereby notified that any dissemination, distribution or copying of this e-mail and/or any attachments thereto, is strictly prohibited. ________________________________________________ Kerberos mailing list Kerberos@mit.edu https://mailman.mit.edu/mailman/listinfo/kerberos ...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #3
Thanks. The problem also exist using GNU ld on AIX too. See below: make[2]: Entering directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc' making all in lib/rpc/unit-test... make[3]: Entering directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc/unit-test' cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -g -qhalt=e -O -D_THREAD_SAFE -o client client. o rpc_test_clnt.o \ -lgssrpc -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): No such file or directory ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): No such file or directory ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): No such file or directory make[3]: *** [client] Error 255 make[3]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc/unit-test' make[2]: *** [all-recurse] Error 1 make[2]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc' make[1]: *** [all-recurse] Error 1 make[1]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib' make: *** [all-recurse] Error 1 root@aoctoolbox:/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src:> whence ld /usr/local/bin/ld root@aoctoolbox:/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src:> ld -v GNU ld version 2.16 Lamar -----Original Message----- From: Russ Al...

KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3
Has any been able to successfully compile KRB5 v1.5.1, v1.5.2, or v1.6 on AIX 5.2 or 5.3 ? If so, can you send me you configs ? I have posted this message before, but no one seems to be able to help. I have successfully compiled KRB5 1.4.4 on AIX 4.3 / 5.2 / 5.3; but since the release of 1.5.1 and beyond, I am cannot get it to work. All of the versions seem to error out here: making all in lib/rpc/unit-test... Target "all" is up to date. cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -D_LARGE_FILES -DLANL -DL ANL_ICN -qhalt=e -O -D_THREAD_SAFE -o client client.o rpc_test_clnt.o -lgssrpc -lgssapi_krb5 -lkr b5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): A file or directory in the path name does not exist. make: 1254-004 The error code from the last command is 255. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. I have tried using GCC 4.0 and IBM XLC/XLC++ 8.0 with no success and failures at the same point. My confi...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3
I currently have an install of KRB5 1.4.4 on this machine and configure finds it under /usr/local/Kerberos where it is installed as seen in the blibpath option. I am currently trying without TCL and will update on what happens. Lamar -----Original Message----- From: Russ Allbery [mailto:rra@stanford.edu] Sent: Thursday, January 25, 2007 10:38 PM To: Saxon, Lamar Cc: kerberos@mit.edu Subject: Re: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 Lamar.Saxon@americredit.com writes: > Has any been able to successfully compile KRB5 v1.5.1, v1.5.2, or v1.6 > on AIX 5.2 or 5.3 ? If so, can you send me you configs ? I have posted > this message before, but no one seems to be able to help. I have > successfully compiled KRB5 1.4.4 on AIX 4.3 / 5.2 / 5.3; but since the > release of 1.5.1 and beyond, I am cannot get it to work. All of the > versions seem to error out here: > making all in lib/rpc/unit-test... > Target "all" is up to date. > cc -L../../../lib > -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -D_LARGE_FILES -DLANL > -DL > ANL_ICN -qhalt=e -O -D_THREAD_SAFE -o client client.o rpc_test_clnt.o > -lgssrpc -lgssapi_krb5 -lkr > b5 -lk5crypto -lcom_err -lkrb5support -lpthreads > ld: 0706-006 Cannot find or open library file: -l k5crypto You can't build the test suite until you install Kerberos. If you don't already have Kerberos installed, don't build the test suite (which I think may be impl...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #4
The compile likes GNU ld and GCC even worse. I move the ld link to force the use of the GNU linker. Here is the latest output using GCC 4.0.1 and ld 2.16. + gcc -shared -v -o libkrb5support.so.0.1 threads.o init-addrinfo.o plugins.o errors.o gmt_mktime.o fake-addrinfo. o -nostartfiles -Xlinker -bgcbypass:1 -Xlinker -bfilelist -Xlinker -bM:SRE -Xlinker -bE:./libkrb5support.exports - Xlinker -bernotok -Xlinker -brtl -lpthreads -lc -Wl,-binitfini::krb5int_thread_support_fini:2 Using built-in specs. Target: powerpc-ibm-aix5.3.0.0 Configured with: ../gcc-4.1.1/configure --disable-nls Thread model: aix gcc version 4.1.1 /usr/local/libexec/gcc/powerpc-ibm-aix5.3.0.0/4.1.1/collect2 -bpT:0x10000000 -bpD:0x20000000 -btextro -bnodelcsec t -bM:SRE -bnoentry -o libkrb5support.so.0.1 -L/usr/local/lib/gcc/powerpc-ibm-aix5.3.0.0/4.1.1 -L/usr/local/lib/gc c/powerpc-ibm-aix5.3.0.0/4.1.1/../../.. threads.o init-addrinfo.o plugins.o errors.o gmt_mktime.o fake-addrinfo.o -bgcbypass:1 -bfilelist -bM:SRE -bE:./libkrb5support.exports -bernotok -brtl -lpthreads -lc -binitfini::krb5int_th read_support_fini:2 -lgcc_s -lc -lgcc_s /usr/local/bin/ld: -static and -shared may not be used together collect2: ld returned 1 exit status make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. Again, any and all help appreciated... Lamar -----Original Message----- From:...

Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3
Any one had any success compiling KRB5 1.5.1 on AIX 5.2 or 5.3 ? I am experiencing the same errors as a previous poster; but have not seen any solutions. Configure is successful with the following flags: export CC=cc export CFLAGS='-D_LARGE_FILES -DLANL -DLANL_ICN'; export CFLAGS ../configure --prefix=/usr/local/kerberos --enable-dns-for-realm --with-tcl=/usr/local --with-vague-errors Same config I use to compile 1.4.4 successfully with the LANL patches provided by Milton Turley. After running make, I get the following errors: making all in util... making all in util/support... cc -I../../include -I./../../include -I. -I. -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1 -D_LARGE_FILES -DLA L -DLANL_ICN -qhalt=e -O -D_THREAD_SAFE -c fake-addrinfo.c "fake-addrinfo.c", line 1212.9: 1506-045 (S) Undeclared identifier my_h_ent. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. Same errors on AIX 5.2 as well as AIX 5.3. Also, same errors with CC or GCC 4. Any help is appreciated and I can beta test any patches. Thanks ! Lamar Privileged and Confidential. This e-mail, and any attachments there to, is intended only for use by the addressee(s) named herein and may contain privileged or confidential information. If you have received this e-mail in error, please notify me immediately by a return e-mail and ...

RE: Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3
Believe it or not; both solutions seem to work and compilation succeeds ! #define GET_HOST_BY_NAME(NAME, HP, ERR, TMP) \ { \ (HP) = (gethostbyname_r((NAME), &TMP.ent, &TMP.data) \ ? 0 \ : &TMP.data); \ (ERR) = h_errno; \ } Worked and so did... #define GET_HOST_BY_NAME(NAME, HP, ERR, TMP) \ { \ struct hostent my_h_ent; \ (HP) = (gethostbyname_r((NAME), &TMP.ent, &TMP.data) \ ? 0 \ : &my_h_ent); \ (ERR) = h_errno; \ } Thanks for the help ! I will continue testing with my current install base on AIX. I really appreciate the rapid responses and solutions ! Lamar -----Original Message----- From: Ken Raeburn [mailto:raeburn@MIT.EDU] Sent: Monday, September 18, 2006 5:13 PM To: Marcus Watts Cc: Saxon, Lamar; kerberos@mit.edu Subject: Re: Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3 On Sep 18, 2006, at 17:56, Marcus Watts wrote: > Lamar.Saxon@americredit.com writes: > ... >> making all in util... >> making all in util/support... >> cc -I../../include -...

RE: KRB5 1.4 vs. KRB5 1.3.6 on AIX 5.2 #2
Downloaded KRB5 1.4.1 and the installation worked great with GCC and AIX make. None of the problems that were encountered with 1.4.0 and the unbalanced "(". The problem with: /usr/local/kerberos/bin/kinit -V kinit(v5): Cannot resolve network address for KDC in requested realm while getting initial credentials still exist. If I force it to version 4 KRB it seems to work with the krb5.conf: /usr/local/kerberos/bin/kinit -4 xxxxxxx Password for xxxxxx@xxx.xxxxxxxxxx.xxx: kinit(v4): Can't send request (send_to_kdc) The krb5.conf file is the same file that worked with the 1.3.6 version of KRB5. It does not seem to work with KRB 1.4 or 1.4.1. Any one having similar problems or solutions ? Thanks, Lamar -----Original Message----- From: Saxon, Lamar Sent: Monday, April 25, 2005 11:08 AM To: 'Tom Yu' Cc: kerberos@mit.edu Subject: RE: KRB5 1.4 vs. KRB5 1.3.6 on AIX 5.2 The compile with CC works with no issues. The other issue still remains. "Cannot resolve network address for KDC in requested realm while getting initial credentials" I tried kinit with the -k and verbose; but not with a password. I will post the results once I get it accomplished. Thanks, Lamar -----Original Message----- From: Tom Yu [mailto:tlyu@MIT.EDU] Sent: Thursday, April 21, 2005 2:18 PM To: Saxon, Lamar Cc: kerberos@mit.edu Subject: Re: KRB5 1.4 vs. KRB5 1.3.6 on AIX 5.2 >>>>> "Lamar" == <Lamar.Saxon@americredit.com> writes: La...

if time = 3 seconds, how do i set the values of the time steps 0,0.1,0.2,0.3,0.5,1.0,1.5,2.0,3.0,5.0 to -9999 from time =3 seconds
Hi &nbsp; I have 18 inputs (arrays) which contain certain statistics and if time&nbsp;&nbsp;= 3 seconds, set the values of time step 5.0 to -9999.0. &nbsp; I was wondering if there is an efficient way to do this without using a lot of case statements? &nbsp; Thank you. Hello AdrianT, it's not really clear to me what you want to do... I suspect: you have an array containing values and you want to output them with a fixed timing of 3 seconds: you should use a for loop autoindexing trough your array and sending the value to your indicator/output/whatever. Put a "wait for next multiple" into your for loop. Or do you want to have a minimum time delay of 3 seconds? Again use a for loop, get the time value and use a InRange&amp;Coerce with minimum set to 3 seconds... Or you should explain more precisely what you need... Hi Thanks for that. Let me explain. &nbsp; The time may vary. Let me give an example. if time&nbsp; = 2.1, I want to set the time step's &nbsp;3.0 and 5.0's values to -9999.0. if the time =0.1 seconds then I want to set 0.2,0.3, 0.5 etc values to -9999.0 etc .................................................................... &nbsp; Can you please help? Thank you. Hello TUDS, do you use different accounts/nicknames ? Well, that's easy, at least for a sorted array: Search for your time-value in the array (Threshold 1D array). Fill all elements from that index till the end with your "error...

Upgrade from VO 1 - 2 - 2..1 -2.2 - 2.3 -2.4 - 2.5 - 2.6 - 2.7
About upgrade 2.5 - 2.7 at $ 384.00 For most products I'm using - the updates (2.0 - 2.1 - 2.7) are free... 2.0 to 3.0 might be worth + 10-30% of the original price? VO is + full price again & again - Full program price for every minor upgrade/bug-fix? I dropped out of the money/bugs [VO] at 2.5 after starting at 1.0 more than 10 years ago. Certainly whoever is making VO have to make a living; earning moneys: - that is OK! A 10 years old VO site; - 10 years later, how much have changed? http://www.yi.com/prany/cavo/cavofront.htm Even MS is not ...

Re: [tao-users] ACE 5.3.5 + TAO 1.3.5 + CIAO 0.3.5 beta released #2 #2
Hi Alex, > What are OCI's plan's for a supported TAO 1.4 release and developer > guide? Will this effect the release of the 1.3 guide? This is an excellent question - I'm sure Malcolm Spence will pitch in when he has a chance and I suspect that OCI will be supporting TAO 1.4 in due time. None of the changes in TAO 1.4 should affect the relevance of the info in the TAO 1.3 developer's guide - there's just more new stuff to document as time permits. Take care, Doug ...

KRB5 1.4 vs. KRB5 1.3.6 on AIX 5.2
I was hoping someone might be able to help me fix an issue I have encountered. I tested KRB5 1.3.6 on AIX 5.2 using C for AIX and the installed make. Created a krb5.conf and krb5.keytab to talk to a Windows 2k AD Domain Controller. Had no issues, connected and received tickets fine. I recently installed KRB5 1.4 on the same machine after removing the 1.3.6 footprint. I encountered an issue seen by others with the error: "Syntax error at line 1 : `(' is not matched" when using AIX's make; but it seems to work fine using GNU Make. After compiling and doing a make install, I consistently receive the following message when using kinit while using the same keytab and configuration as 1.3.6: "Cannot resolve network address for KDC in requested realm while getting initial credentials" Is there a significant change to krb5.conf between 1.3.6 and 1.4 ? The binaries seem to work fine; but it does not look like it is even looking at the krb5.conf file. I can change the name or move it and the message stays the same. I have tried disabling DNS for realm and kdc; put master_kdc in the entries; but still does not even act like it is looking at this file. Any help is greatly appreciated. Lamar Saxon Lamar.Saxon@americredit.com Lead Server Engineer 817-525-7122 //AmeriCredit 4001 Embarcadero Arlington ,TX 76014 Privileged and Confidential. This e-mail, and any attachments there to, is intended only for use by the addressee(s) named herein and...

[ace-users] Tests failed : ACE 5.5.2 - AIX 5.3
Hi, My first mail before my message in the group failed (my subscription was not activated). The PRF below describes my problems. I can compile and link but several ACE's tests fail. I only use ACE library and only compile it by cd'ing in the ace directory before running make. I already made some fixes described below to compile and to link the library. I'm not abble to interpret the faild tests to identify the problem source or area. I didn't find the scoreboard before my mail. I see that several tests fails for all compilations on AIX. I try to reassure myself by looking these results, it's not only for my configuration. But it's a daily build with last development version. For the 5.5.2 stable version they should probably not fail ? Regards, PO Houot. ACE VERSION: 5.5.2 HOST MACHINE and OPERATING SYSTEM: bash-3.00$ uname -a AIX localhost 3 5 0040983B4C00 unknown unknown AIX bash-3.00$ oslevel -r 5300-05 TARGET MACHINE and OPERATING SYSTEM, if different from HOST: Same as host COMPILER NAME AND VERSION (AND PATCHLEVEL): bash-3.00$ g++ -v Using built-in specs. Target: powerpc-ibm-aix5.3.0.0 Configured with: ../gcc-4.1.1/configure --disable-nls Thread model: aix gcc version 4.1.1 This compiler is installed from packages provided by UCLA AIX Software library THE $ACE_ROOT/ace/config.h FILE : bash-3.00$ more $ACE_ROOT/ace/config.h #include "ace/config-aix-5.x.h" T...

python 2.5.2 or Python 2.6 compilation problem on AIX 5.3
Hello: I am trying to compile Python 2.5.2 on AIX 5.3 with gcc 4.2.3. I am getting following error. (I also tried Python 2.6 with same error) creating build/temp.aix-5.3-2.5/share/tmhsdsd2/tmp/Python-2.5.2/ Modules gcc -pthread -fno-strict-aliasing -DNDEBUG -g -fwrapv -O3 -Wall - Wstrict-prototypes -I. -I/share/tmhsdsd2/tmp/Python-2.5.2/./Include - I. -IInclude -I./Include -I/usr/local/include -I/share/tmhsdsd2/tmp/ Python-2.5.2/Include -I/share/tmhsdsd2/tmp/Python-2.5.2 -c /share/ tmhsdsd2/tmp/Python-2.5.2/Modules/_struct.c -o build/temp.aix-5.3-2.5/ share/tmhsdsd2/tmp/Python-2.5.2/Modules/_...

RE: KRB5 1.4 vs. KRB5 1.3.6 on AIX 5.2
The compile with CC works with no issues. The other issue still remains. "Cannot resolve network address for KDC in requested realm while getting initial credentials" I tried kinit with the -k and verbose; but not with a password. I will post the results once I get it accomplished. Thanks, Lamar -----Original Message----- From: Tom Yu [mailto:tlyu@MIT.EDU] Sent: Thursday, April 21, 2005 2:18 PM To: Saxon, Lamar Cc: kerberos@mit.edu Subject: Re: KRB5 1.4 vs. KRB5 1.3.6 on AIX 5.2 >>>>> "Lamar" == <Lamar.Saxon@americredit.com> writes: Lamar> I tested KRB5 1.3.6 on AIX 5.2 using C for AIX and the installed make. Lamar> Created a krb5.conf and krb5.keytab to talk to a Windows 2k AD Domain Lamar> Controller. Had no issues, connected and received tickets fine. Lamar> I recently installed KRB5 1.4 on the same machine after removing the Lamar> 1.3.6 footprint. I encountered an issue seen by others with the error: Lamar> "Syntax error at line 1 : `(' is not matched" Lamar> when using AIX's make; but it seems to work fine using GNU Make. This was ticket #2992, which will be fixed in the upcoming krb5-1.4.1 release. Lamar> After compiling and doing a make install, I consistently receive the Lamar> following message when using kinit while using the same keytab and Lamar> configuration as 1.3.6: Lamar> "Cannot resolve network address for KDC in requested realm while getting...

KRB5 1.4 vs. KRB5 1.3.6 on AIX 5.2 (fwd)
I have done some research on this problem. The host resolve code does not complete successfully. I have traced the error to the routine at /kerberos/mit/krb5-1.4/src/lib/krb5/os/dnsglue.c. In the routine a call is made to res_ninit to provide dns information for the kdc. res_ninit updates the structure at statbuf but overlays memory 72 bytes past the structure boundary. I have opened a problem with IBM on res_ninit. The problem is not yet resolved but IBM suggested using a malloc for the structure instead of static storage. I am trying to get IBM to correct the error in res_ninit. No resoultion yet. >Delivery-Date: Thu, 21 Apr 2005 12:15:05 -0600 >Return-Path: <owner-kerberos@lanl.gov> >X-Original-To: hgm@localhost.localdomain >Delivered-To: hgm@localhost.localdomain >Received: from localhost (localhost.localdomain [127.0.0.1]) > by moki.lanl.gov (Postfix) with ESMTP id 15AAB68739 > for <hgm@localhost.localdomain>; Thu, 21 Apr 2005 12:15:05 -0600 > (MDT) >Received: from ccn-mail.lanl.gov [128.165.4.105] > by localhost with POP3 (fetchmail-6.2.5) > for hgm@localhost.localdomain (single-drop); Thu, 21 Apr 2005 > 12:15:05 -0600 >(MDT) >Received: from ccn-mail.lanl.gov ([unix socket]) > by ccn-mail.lanl.gov (Cyrus v2.2.3-Red Hat 2.2.3-6.lanl) with > LMTP; Thu, 21 >Apr 2005 12:11:13 -0600 >X-Sieve: CMU Sieve 2.2 >Received: from mailrelay3.lanl.gov (mail...

Need to take mksysb backup of AIX 5.2 & 5.1 on AIX 5.1 Server.
Hi All Need docmented notes of step by step installing NIM Server on AIX 5.1 Server. Send me also documented notes on installing the NIM client for Aix 5.2 & 5.1. You can send the docs to prsanwal@gmail.com mail account. Awaiting your quick response. Warm Regards Prateek S How about go search IBM's web site and use the man pages... then if you get stuck, come back here and ask for help... We're not here to do your job for you. seriously! jeez prateek... have a little tact man! you want us to find you a bunch of documentation and mail it to you? and quickly? come on dude... ...

convert String "1;2;3;4;5;" to Array [1, 2, 3, 4, 5]
I'm trying to convert a String of numbers that are separated by semicolons to an Array---totally for fun, to stretch my ruby understanding, fyi. I use the Array in a while loop which does work when the Array looks like = [1,2,3,4,5,...]---so that part is working. But I want to use ruby to convert a String = "1;2;3;4;5;6;7;8;9;10" into an Array [1,2,3,4,5,...] so that I can use these values. I've tried many a method, but can't seem to get the desired result; I've tried gsub(/\;/, ","), eval (), and others. ########## raw_data = "1;2;3...

Installing TOMCAT 4.1 (or higher) on AIX 5.1/5.2 #2
Hi, I am searching for information on installing TOMCAT 4.1 (or higher) on AIX 5.1/5.2 platform. Is it possible? Regards ...

Error making krb5-1.5.1 on AIX 5.3 TL 5
When running make on krb5-1.5.1 I get the following errors: Target "all" is up to date. gcc -L../../../lib -Wl,-blibpath:/usr/krb5/lib::/usr/lib:/lib -g -O2 -Wa ll -Wmissing-prototypes -Wcast-qual -Wcast-align -Wconversion -Wshadow -pedanti c -L/usr/linux/lib,Wl,-brtl,-blibsuff:so -o client client.o rpc_test_clnt.o -lg ssrpc -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lkrb5support ld: 0711-317 ERROR: Undefined symbol: krb5_gss_dbg_client_expcreds ld: 0711-317 ERROR: Undefined symbol: gssrpc_auth_debug_gssapi ld: 0711-317 ERROR: Undefined symbol: gssrpc_misc_debug_gssapi ld: 0711-317 ERROR: Undefined symbol: gssrpc_svc_debug_gssapi ld: 0711-317 ERROR: Undefined symbol: ..gssrpc_auth_gssapi_create_default ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information. collect2: ld returned 8 exit status make: 1254-004 The error code from the last command is 1. Stop. The OS is AIX 5.3 TL 5. gcc is (GCC) 3.3.3. Configure looks like: export LIBPATH=/lppdir/build/krb5/krb5/src/lib:/usr/local/lib:/usr/linux/lib:$LI BPATH export LDFLAGS="-L/usr/linux/lib,Wl,-brtl,-blibsuff:so" ../configure --with-cc=gcc \ --enable-shared \ --libdir=/usr/krb5/lib \ --disable-thread-support Any ideas? I was able to get through these errors by finding the compiled library in the src tree, copying it to /usr/lib and linking it to a lib.a file. For example to fix the error "ld: 0711-317 ERROR: Undefined symbol: krb5_gss_dbg_client_expcreds&...

Installing AIX 5.1, 5.2 and 5.3 on a single server
Hi all, Is there any way to install different versions of AIX (from 5.1 to 5.3) on a single server? And to make them work simultaneously? I heard of LPAR but I am not sure it is possible to do such a thing with this feature... Thx for your help in advance. Regards The_Nail wrote: > Hi all, > > Is there any way to install different versions of AIX (from 5.1 to > 5.3) on a single server? And to make them work simultaneously? > I heard of LPAR but I am not sure it is possible to do such a thing > with this feature... > > > Thx for your help in advance. > Regar...

Compiling 1.5.3 or 1.6.1 on Solaris 5.9
I've been pulling my hair out over this for a couple hours and I can't see forest for trees at this point. Both version fail to compile libkrb5support.so.0.1 with this error + gcc -g -O2 -Wall -Wmissing-prototypes -Wcast-qual -Wcast-align - Wconversion -Wshadow -pedantic -shared -h libkrb5support.so.0 -o libkrb5support.so.0.1 threads.so init-addrinfo.so plugins.so errors.so gmt_mktime.so fake-addrinfo.so -R/afs/slac.stanford.edu/ package/krb5/1.5.3/sun4x_59/lib -lresolv -lsocket -lnsl -ldl ld: fatal: file libkrb5support.so.0: open failed: No such file or directory collect2: ld returned 1 exit status I am using gcc 3.2.3 and the only odd thing I can see is the -shared -h libkrb5support.so.0 option. Documentation on what -h actually does seems sparse... It certainly doesn't do what is listed in the man page. _ Booker C. Bense ...

Web resources about - KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #2 - comp.protocols.kerberos

Microsoft Compiled HTML Help - Wikipedia, the free encyclopedia
Microsoft Compiled HTML Help is a Microsoft proprietary online help format, consisting of a collection of HTML pages, an index and other navigation ...

compiled st - kilda to rosstown extension - Flickr - Photo Sharing!
Explore Cameron Stewart's photos on Flickr. Cameron Stewart has uploaded 431 photos to Flickr.

21 Foot Rule Less Talk and More action (compiled and shortened) - YouTube
http://www.21footrule.com It is one thing to read about the 21 foot rule, it is another to actually see it done. Many times people think that ...

Hillary and Bill Clinton compiled disloyalty 'hit list', new book claims
Hillary and Bill Clinton keep a detailed "hit list" of everyone who has crossed them during more than 20 years at the apex of American politics, ...

Steve Jobs videos compiled into ultimate collection
... New York Times on Twitter, a pretty extensive collection of Steve Jobs’ interviews, keynotes, product demos, and rare company video was compiled ...

NRA compiled secret gun registry on “tens of millions” of gun owners
If you really believe the government is Hitler, then why aren't they capable of stealing the NRA's gun registry? .

All of The Simpsons’ best movie references compiled in one video
After 27 seasons on the air, it only makes sense that The Simpsons would reference every show, movie, book and pop culture artifact that it possibly ...

"Within the past 24 hours, user-contributed link aggregator reddit.com compiled a 'secret list' of banned ...
"... including such reputable news sites as The Atlantic, Business Week, PhysOrg and ScienceDaily." Reddit is a site that claims to be all for ...

Thank goodness the NSA had the sense to put funnyman Art Buchwald on the watch list it compiled for President ...
... which turned to the FBI, and eventually the NSA "expanding the watch list to include domestic terrorist and foreign radical suspects" compiled ...


Resources last updated: 3/10/2016 10:13:00 PM