f



Re: Compiling 1.5.3 or 1.6.1 on Solaris 5.9

> On Jul 5, 2007, at 3:57 PM, Tom Yu wrote:

>> The configure script should detect GCC and change the shared library
>> build command accordingly, and in my experience it works.  The
>> "-shared -h libkrb5support.so.0" looks like the configure script
>> thought it was compiling with Sun's C compiler.
>


I did a clean slate and configured 1.6.1 with

../configure --prefix=/afs/slac.stanford.edu/package/krb5/1.6.1/sun4x_59

and got the same error. I then poked around in config/shlib.conf and
as near as I can tell it will never do the right thing with solaris  
and gcc.


*-*-solaris*)
         if test "$krb5_cv_prog_gcc" = yes; then
                 PICFLAGS=-fPIC
                 LDCOMBINE='$(CC) $(CFLAGS) -shared -h $(LIBPREFIX)$ 
(LIBBASE)$(SHLIBSEXT)'
         else


Changing the -h to -Wl,-h,$(LIBPREFIX)$(LIBBASE)$(SHLIBSEXT), seems  
to have fixed the problem.

_ Booker C. Bense

0
bbense1308 (13)
7/5/2007 11:23:15 PM
comp.protocols.kerberos 5541 articles. 1 followers. jwinius (31) is leader. Post Follow

0 Replies
893 Views

Similar Articles

[PageSpeed] 14

Reply:

Similar Artilces:

Compiling 1.5.3 or 1.6.1 on Solaris 5.9
I've been pulling my hair out over this for a couple hours and I can't see forest for trees at this point. Both version fail to compile libkrb5support.so.0.1 with this error + gcc -g -O2 -Wall -Wmissing-prototypes -Wcast-qual -Wcast-align - Wconversion -Wshadow -pedantic -shared -h libkrb5support.so.0 -o libkrb5support.so.0.1 threads.so init-addrinfo.so plugins.so errors.so gmt_mktime.so fake-addrinfo.so -R/afs/slac.stanford.edu/ package/krb5/1.5.3/sun4x_59/lib -lresolv -lsocket -lnsl -ldl ld: fatal: file libkrb5support.so.0: open failed: No such file or directory collect2: ld returned 1 exit status I am using gcc 3.2.3 and the only odd thing I can see is the -shared -h libkrb5support.so.0 option. Documentation on what -h actually does seems sparse... It certainly doesn't do what is listed in the man page. _ Booker C. Bense ...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #3
Thanks. The problem also exist using GNU ld on AIX too. See below: make[2]: Entering directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc' making all in lib/rpc/unit-test... make[3]: Entering directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc/unit-test' cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -g -qhalt=e -O -D_THREAD_SAFE -o client client. o rpc_test_clnt.o \ -lgssrpc -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): No such file or directory ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): No such file or directory ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): No such file or directory make[3]: *** [client] Error 255 make[3]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc/unit-test' make[2]: *** [all-recurse] Error 1 make[2]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc' make[1]: *** [all-recurse] Error 1 make[1]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib' make: *** [all-recurse] Error 1 root@aoctoolbox:/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src:> whence ld /usr/local/bin/ld root@aoctoolbox:/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src:> ld -v GNU ld version 2.16 Lamar -----Original Message----- From: Russ Al...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #6
Wasn't really the solution I came up with; but it worked. You might be correct since now the OpenSSL binaries will not build against the Kerberos libraries currently. libssl and libcrypto build fine along with everything else; but the actual openssl binary fails. Phil, Have you successfully linked OpenSSL with the new Kerberos libraries ? Thanks, Lamar -----Original Message----- From: Sam Hartman [mailto:hartmans@mit.edu] Sent: Friday, February 09, 2007 10:18 AM To: Saxon, Lamar Cc: pgp@psu.edu; kerberos@MIT.EDU Subject: Re: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 Do you really want rtl as a linker flag? Isn't that going to be an issue for people linking against the kerberos libraries. Why is that the right solution? Privileged and Confidential. This e-mail, and any attachments there to, is intended only for use by the addressee(s) named herein and may contain privileged or confidential information. If you have received this e-mail in error, please notify me immediately by a return e-mail and delete this e-mail. You are hereby notified that any dissemination, distribution or copying of this e-mail and/or any attachments thereto, is strictly prohibited. ________________________________________________ Kerberos mailing list Kerberos@mit.edu https://mailman.mit.edu/mailman/listinfo/kerberos ...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #5
Phil, Tested on AIX 5.3 TL05 SP4 with XLC++/XLC 8.0 and worked great ! I will be testing on AIX 5.2 TL09 SP3 and AIX 4.3 ML11 here shortly... Thanks for getting this figured out ! Also, appreciate the help from Sam and Martin who were working on it too... Lamar -----Original Message----- From: Phil Pishioneri [mailto:pgp@psu.edu] Sent: Wednesday, February 07, 2007 6:35 PM To: Saxon, Lamar Cc: kerberos@mit.edu Subject: Re: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 I've gotten 1.5.x and 1.6 to build and run on AIX 5.2 (domain referral in 1.6 works nicely). So far I have only tested the client commands: klist, kvno, kinit, kdestroy. No 3rd party software tested yet, either. This was done with the IBM VisualAge C++ Professional / C for AIX Compiler, Version 6. The one major change: add LDFLAGS="-brtl" to configure. My configure line was (prefix edited): ./configure --without-krb4 --prefix=... CC=cc LDFLAGS=-brtl There was one problem during the 1.{5,6} builds (1.5 has a bug that's been documented already), it failed in making all in plugins/kdb/db2/libdb2/test... with ld: 0706-006 Cannot find or open library file: -l db ld:open(): A file or directory in the path name does not exist. my quick&dirty fix for that was (starting in .../krb5-1.6/src/): cd lib ln -s ../plugins/kdb/db2/libdb2/libdb.so.1.1 libdb.so.1.1 ln -s libdb.so.1.1 libdb.so -Phil Privileged and Confidential. This e-mail, and any attac...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3
I currently have an install of KRB5 1.4.4 on this machine and configure finds it under /usr/local/Kerberos where it is installed as seen in the blibpath option. I am currently trying without TCL and will update on what happens. Lamar -----Original Message----- From: Russ Allbery [mailto:rra@stanford.edu] Sent: Thursday, January 25, 2007 10:38 PM To: Saxon, Lamar Cc: kerberos@mit.edu Subject: Re: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 Lamar.Saxon@americredit.com writes: > Has any been able to successfully compile KRB5 v1.5.1, v1.5.2, or v1.6 > on AIX 5.2 or 5.3 ? If so, can you send me you configs ? I have posted > this message before, but no one seems to be able to help. I have > successfully compiled KRB5 1.4.4 on AIX 4.3 / 5.2 / 5.3; but since the > release of 1.5.1 and beyond, I am cannot get it to work. All of the > versions seem to error out here: > making all in lib/rpc/unit-test... > Target "all" is up to date. > cc -L../../../lib > -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -D_LARGE_FILES -DLANL > -DL > ANL_ICN -qhalt=e -O -D_THREAD_SAFE -o client client.o rpc_test_clnt.o > -lgssrpc -lgssapi_krb5 -lkr > b5 -lk5crypto -lcom_err -lkrb5support -lpthreads > ld: 0706-006 Cannot find or open library file: -l k5crypto You can't build the test suite until you install Kerberos. If you don't already have Kerberos installed, don't build the test suite (which I think may be impl...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #4
The compile likes GNU ld and GCC even worse. I move the ld link to force the use of the GNU linker. Here is the latest output using GCC 4.0.1 and ld 2.16. + gcc -shared -v -o libkrb5support.so.0.1 threads.o init-addrinfo.o plugins.o errors.o gmt_mktime.o fake-addrinfo. o -nostartfiles -Xlinker -bgcbypass:1 -Xlinker -bfilelist -Xlinker -bM:SRE -Xlinker -bE:./libkrb5support.exports - Xlinker -bernotok -Xlinker -brtl -lpthreads -lc -Wl,-binitfini::krb5int_thread_support_fini:2 Using built-in specs. Target: powerpc-ibm-aix5.3.0.0 Configured with: ../gcc-4.1.1/configure --disable-nls Thread model: aix gcc version 4.1.1 /usr/local/libexec/gcc/powerpc-ibm-aix5.3.0.0/4.1.1/collect2 -bpT:0x10000000 -bpD:0x20000000 -btextro -bnodelcsec t -bM:SRE -bnoentry -o libkrb5support.so.0.1 -L/usr/local/lib/gcc/powerpc-ibm-aix5.3.0.0/4.1.1 -L/usr/local/lib/gc c/powerpc-ibm-aix5.3.0.0/4.1.1/../../.. threads.o init-addrinfo.o plugins.o errors.o gmt_mktime.o fake-addrinfo.o -bgcbypass:1 -bfilelist -bM:SRE -bE:./libkrb5support.exports -bernotok -brtl -lpthreads -lc -binitfini::krb5int_th read_support_fini:2 -lgcc_s -lc -lgcc_s /usr/local/bin/ld: -static and -shared may not be used together collect2: ld returned 1 exit status make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. Again, any and all help appreciated... Lamar -----Original Message----- From:...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #2
Exact same errors specifying --without-tcl. I removed the config.cache, config.log, and etc the reran configure. From my configure line - ../configure --prefix=/usr/local/kerberos --enable-dns-for-realm --without-tcl --with-vague-errors Then after make... making all in lib/rpc/unit-test... Target "all" is up to date. cc -I../../../include -I./../../../include -I. -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1 -g -qhalt=e -O _THREAD_SAFE -c client.c cc -I../../../include -I./../../../include -I. -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1 -g -qhalt=e -O _THREAD_SAFE -c rpc_test_clnt.c cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -g -qhalt=e -O -D_THREAD_SAFE -o c nt client.o rpc_test_clnt.o -lgssrpc -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): A file or directory in the path name does not exist. make: 1254-004 The error code from the last command is 255. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. Any ot...

KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3
Has any been able to successfully compile KRB5 v1.5.1, v1.5.2, or v1.6 on AIX 5.2 or 5.3 ? If so, can you send me you configs ? I have posted this message before, but no one seems to be able to help. I have successfully compiled KRB5 1.4.4 on AIX 4.3 / 5.2 / 5.3; but since the release of 1.5.1 and beyond, I am cannot get it to work. All of the versions seem to error out here: making all in lib/rpc/unit-test... Target "all" is up to date. cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -D_LARGE_FILES -DLANL -DL ANL_ICN -qhalt=e -O -D_THREAD_SAFE -o client client.o rpc_test_clnt.o -lgssrpc -lgssapi_krb5 -lkr b5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): A file or directory in the path name does not exist. make: 1254-004 The error code from the last command is 255. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. I have tried using GCC 4.0 and IBM XLC/XLC++ 8.0 with no success and failures at the same point. My confi...

KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #2
I have seen several emails from different people over the last few months on trying to get KRB5 1.5 or later to compile on AIX 5.x. And no responses that fix the problem. I have had the same problem and can only presume that Kerberos is no longer supported on AIX. Is this the case? No Kerberos on AIX? It just won't compile anymore with the changes to shared libraries. ________________________________________________ Kerberos mailing list Kerberos@mit.edu https://mailman.mit.edu/mailman/listinfo/kerberos >>>>> "Grant," == Grant, Martin <Martin.Grant@fmr.com> writes: Grant,> I have seen several emails from different people over the Grant,> last few months on trying to get KRB5 1.5 or later to Grant,> compile on AIX 5.x. And no responses that fix the Grant,> problem. I have had the same problem and can only presume Grant,> that Kerberos is no longer supported on AIX. Is this the Grant,> case? No Kerberos on AIX? It just won't compile anymore Grant,> with the changes to shared libraries. We no longer run AIX tests. Our donated AIX box was very old and slow, and its disk was in the process of dieing. If there's no one out there in the Kerberos development community who cares enough about AIX to get the betas, test them and send bug fixes, then yes, AIX support is going to be fairly bad. Kerberos is an open-source product; if you want it to work better on your pl...

3DLDF Release 1.1.5 and 1.1.5.1
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Release of 3DLDF 1.1.5. 3DLDF is a GNU package for three-dimensional drawing with MetaPost output. It is available from http://ftp.gnu.org/gnu/3dldf and other ftp servers. Please see the author's website, http://wwwuser.gwdg.de/~lfinsto1 and http://www.gnu.org/directory/graphics/3D/3DLDF.html for more information. In release 1.1.5, I've tied up some loose ends. I wanted to do this before starting on the input routine. * Added `const real step' argument to the version of Ellipse::intersection_points() that takes an Ellipse argument. * BUG FIX: Added `touch 3DLDFmp.mp' to the `3DLDFmp.mp' target in 3DLDF-1.1.5/CWEB/Makefile.am. This ensures that TeX and dvips will be run if MetaPost is run on `3DLDFmp.mp'. This happens if `3DLDFput.mp' is newer than `3DLDFmp.mp', but the latter isn't changed, so TeX and dvips weren't being run. I'm surprized nobody's complained about this. Not yet documented in the _3DLDF User and Reference Manual_. * Added `PHONY' targets as synonyms for certain targets: `cpl' for `3dldf'. For compiling and linking `3dldf'. `mp' for `3DLDFmp.mp'. For running MetaPost on `3DLDFmp.mp'. `ldf' for `3DLDFput.mp'. For running `3dldf'. Not yet documented in the _3DLDF User and Reference Manual_. * It is now possible to ``typedef'' ...

net-snmp-5.1.3 compilation failed in solaris 2.5.1
Dear Sir/Madam, I followed the step in net-snmp README file to compile the net-snmp software in a Solaris 2.5.1 box. The "./configure" step was sucessful: --------------------------------------------------------- Net-SNMP configuration summary: --------------------------------------------------------- Net-SNMP Version: 5.1.3 Building for: solaris2 Network transport support: Callback Unix TCP UDP SNMPv3 Security Modules: usm Agent MIB code: mibII ucd_snmp snmpv3mibs notification target agent_mibs agentx u...

Re: Puzzle: Converting 1-10 to 1,2,3,4,5,6,7,8,9,10 #3
Very nice! -Mary ----- Original Message -----=20 From: Toby Dunn=20 To: SAS-L@LISTSERV.UGA.EDU=20 Sent: Friday, October 03, 2008 3:55 PM Subject: Re: Puzzle: Converting 1-10 to 1,2,3,4,5,6,7,8,9,10 Data _Null_ ; Length NewString $ 200 ; String =3D '1-10,21,22,30-35,40,41' ; Do I =3D 1 To ( 1 + CountC( String , ',' ) ) ; TempA =3D Scan( String , I , ',' ) ; If Find( TempA , '-' ) Then Do ; Start =3D Input( Scan( TempA , 1 , '-' ) , Best12. ) ; Stop =3D Input( Scan( TempA , 2 , '-' ) , Best12. ) ; ...

Re: Puzzle: Converting 1-10 to 1,2,3,4,5,6,7,8,9,10 #9
Yeah, the format only gets resolved before or after depending on double or single quotes. The datastep uses only whatever format is there when it executes....Oh well Paul Choate DDS Data Extraction (916) 654-2160 -----Original Message----- From: SAS(r) Discussion [mailto:SAS-L@LISTSERV.UGA.EDU] On Behalf Of ./ ADD NAME=Data _null_, Sent: Friday, October 03, 2008 4:00 PM To: SAS-L@LISTSERV.UGA.EDU Subject: Re: Puzzle: Converting 1-10 to 1,2,3,4,5,6,7,8,9,10 You program does not work "the first time" becasue NUMSTR does not exist. 7235 Data _Null_; 7236 Length NewString $ 200 ; ...

Error while ACE 5.3.1 or 5.4.1 compiling and installing by MinGW 3.3.3
Hi, I have installed MinGW packages: binutils-2.13.90-20030111-1.tar.gz gcc-core-3.3.3-20040217-1.tar.gz gcc-g++-3.3.3-20040217-1.tar.gz mingw-runtime-3.3.tar.gz w32api-2.5.tar.gz Also I've configured environment due to ACE-INSTALL.html according MinGW compiler. OS: WinXP SP2. $ACE_ROOT=F:\ACE531 I get next compiling error: F:\ACE531\ace>gmake gmake.EXE[1]: Entering directory `F:/ACE531/ace' d:\Utils\Unix\diff.EXE: -: Invalid argument gmake.EXE[1]: Leaving directory `F:/ACE531/ace' gmake.EXE[1]: Entering directory `F:/ACE531/ace' d:/Utils/Unix/gmake.EXE -f Makefile.dirs SUBDIR_TARGET=all RMCast.subdir gmake.EXE[2]: Entering directory `F:/ACE531/ace' d:/Utils/Unix/gmake.EXE -f Makefile -C RMCast all gmake.EXE[3]: Entering directory `F:/ACE531/ace/RMCast' Installing libACE_RMCast.dll -> F:\ACE531/ace d:\Utils\Unix\cp.EXE: F:ACE531aceRMCast/libACE_RMCast.dll: No such file or directory Installing libACE_RMCast.dll -> F:\ACE531/ace d:\Utils\Unix\cp.EXE: F:ACE531aceRMCast/libACE_RMCast.dll: No such file or directory gmake.EXE[3]: *** [F:\ACE531/ace/libACE_RMCast.dll] Error 1 gmake.EXE[3]: Leaving directory `F:/ACE531/ace/RMCast' gmake.EXE[2]: *** [RMCast.subdir] Error 2 gmake.EXE[2]: Leaving directory `F:/ACE531/ace' gmake.EXE[1]: *** [all.nested] Error 2 gmake.EXE[1]: Leaving directory `F:/ACE531/ace' d:\Utils\Unix\gmake.EXE: *** [all] Error 2 There are no folder separators in path (for exampl...

JDK 1.3.1/1.4/1.5
How can you display JDialog without the Close on the Top Right in any of these versions(JDK 1.3.1/1.4/1.5). The only thing it displays is the close button X and I don't want that? Thank you! vnssoftware wrote: > How can you display JDialog without the Close on the Top Right in any > of these versions(JDK 1.3.1/1.4/1.5). The only thing it displays is > the close button X and I don't want that? > > Thank you! Dialog.setUndecorated() since 1.4 -- Knute Johnson email s/nospam/knute/ Molon labe... ...

if time = 3 seconds, how do i set the values of the time steps 0,0.1,0.2,0.3,0.5,1.0,1.5,2.0,3.0,5.0 to -9999 from time =3 seconds
Hi &nbsp; I have 18 inputs (arrays) which contain certain statistics and if time&nbsp;&nbsp;= 3 seconds, set the values of time step 5.0 to -9999.0. &nbsp; I was wondering if there is an efficient way to do this without using a lot of case statements? &nbsp; Thank you. Hello AdrianT, it's not really clear to me what you want to do... I suspect: you have an array containing values and you want to output them with a fixed timing of 3 seconds: you should use a for loop autoindexing trough your array and sending the value to your indicator/output/whatever. Put a "wait for next multiple" into your for loop. Or do you want to have a minimum time delay of 3 seconds? Again use a for loop, get the time value and use a InRange&amp;Coerce with minimum set to 3 seconds... Or you should explain more precisely what you need... Hi Thanks for that. Let me explain. &nbsp; The time may vary. Let me give an example. if time&nbsp; = 2.1, I want to set the time step's &nbsp;3.0 and 5.0's values to -9999.0. if the time =0.1 seconds then I want to set 0.2,0.3, 0.5 etc values to -9999.0 etc .................................................................... &nbsp; Can you please help? Thank you. Hello TUDS, do you use different accounts/nicknames ? Well, that's easy, at least for a sorted array: Search for your time-value in the array (Threshold 1D array). Fill all elements from that index till the end with your "error...

VxWorks 5.5.1 and SQLITE 3.6.1
Hello all, I was wondering whether anyone has had any success with compiling and using the latest version of SQLITE with VxWorks and would be able to help with sorting out the problems I have, i.e.VxWorks doesn't have the following commands which are all used in SQLITE: fctrl dup fsync access getpid Cheers in advance, Ant On Aug 20, 7:40=A0pm, Ant <anthony.kers...@baesystems.com> wrote: > Hello all, > =A0 I was wondering whether anyone has had any success with compiling > and using the latest version of SQLITE with VxWorks and would be able > to help with sorting ou...

Struts 1.27, Tomcat 5.5.9, Taglib 1.1
Struts 1.27, Tomcat 5.5.9, Taglib 1.1 I spent 3 full days on this stuff. The solution for me seems to be 1) Make sure you have the latest jakarta taglib. include standard.jar and jstl.jar in your app's web-inf/lib 2) MAKE SURE YOU HAVE THE LATEST xercesImpl.jar AND NOT xerces.jar (My problem!) 3) Change app web.xml to use web-app_2_4.xsd (serlvet 2,4 and jsp 2.0) eg: <web-app xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd" version="2.4"> 4) No longer need <taglib> in web.xml. I think it is no longer support and read somewhere that you can include it with a <jsp-config>. all *.tld are in their support jars 5) change jsp to use... (YES, WITH THE /jsp/jstl !!!) eg: <%@ taglib prefix="html" uri="http://struts.apache.org/tags-html" %> <%@ taglib prefix="bean" uri="http://struts.apache.org/tags-bean" %> <%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %> <%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %> Worst case email me at luke@webesse.com :) ...

RE: Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3
Believe it or not; both solutions seem to work and compilation succeeds ! #define GET_HOST_BY_NAME(NAME, HP, ERR, TMP) \ { \ (HP) = (gethostbyname_r((NAME), &TMP.ent, &TMP.data) \ ? 0 \ : &TMP.data); \ (ERR) = h_errno; \ } Worked and so did... #define GET_HOST_BY_NAME(NAME, HP, ERR, TMP) \ { \ struct hostent my_h_ent; \ (HP) = (gethostbyname_r((NAME), &TMP.ent, &TMP.data) \ ? 0 \ : &my_h_ent); \ (ERR) = h_errno; \ } Thanks for the help ! I will continue testing with my current install base on AIX. I really appreciate the rapid responses and solutions ! Lamar -----Original Message----- From: Ken Raeburn [mailto:raeburn@MIT.EDU] Sent: Monday, September 18, 2006 5:13 PM To: Marcus Watts Cc: Saxon, Lamar; kerberos@mit.edu Subject: Re: Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3 On Sep 18, 2006, at 17:56, Marcus Watts wrote: > Lamar.Saxon@americredit.com writes: > ... >> making all in util... >> making all in util/support... >> cc -I../../include -...

build jdk 1.3.1 or 1.4.1 on freebsd 5.1-release :(
Hi, I'm not able to build sun java jdk 1.3.1 on FreeBSD 5.1 release, here is the error message: ===> Applying FreeBSD patches for jdk-1.3.1p8_2 ===> jdk-1.3.1p8_2 depends on executable: gm4 - found ===> jdk-1.3.1p8_2 depends on executable: zip - found ===> jdk-1.3.1p8_2 depends on file: /usr/X11R6/lib/libXm.so - found ===> jdk-1.3.1p8_2 depends on executable: msgfmt - found ===> jdk-1.3.1p8_2 depends on file: /usr/local/diablo-jdk1.3.1/bin/javac - not found ===> Verifying install for /usr/local/diablo-jdk1.3.1/bin/javac in /usr/ports/java/diablo-jdk13 ===> diablo-jdk-1.3.1.0 : Because of licensing restrictions, you must fetch the distribution manually. Please access http://www.FreeBSDFoundation.org/cgi-bin/download.cgi?package=diablo-caffe-1.3.1-0.tar.bz2 with a web browser and "Accept" the End User License Agreement for "Caffe Diablo ". Please place the downloaded diablo-caffe-1.3.1-0.tar.bz2 in /usr/ports/distfiles. ..*** Error code 1 Stop in /usr/ports/java/diablo-jdk13. *** Error code 1 Stop in /usr/ports/java/jdk13. ----------------------------------------------------- It 's mentionned that I should download diablo-caffe-1.3.1etc... but this release is not for FreeBSD5 So I tried to install jdk 1.4.1 and here is the output: ------------------------------------------------------------------------------ External File/Binary Locations: HOTSPOT_SERVER_PAT...

Re: Puzzle: Converting 1-10 to 1,2,3,4,5,6,7,8,9,10 #4
Nice! But you assume string is a macro var. What about string is a data step var and the dataset has many records? On Fri, 3 Oct 2008 16:22:31 -0500, ./ ADD NAME=Data _null_, <iebupdte@GMAIL.COM> wrote: >All positive ranges? > >Thinking about a way to get SAS to do most of the work this is what I >came up with.... > >7227 %let string = 1-10,21,22,30-35,40,41; >7228 data _null_; >7229 length newstring $256; >7230 do _n_ = %qsysfunc(tranwrd(%superq(string),-,%str( to ))); >7231 newstring = catx(',',newstring,_n_); >7232 end...

Re: Puzzle: Converting 1-10 to 1,2,3,4,5,6,7,8,9,10 #7
Hey Toby - What no regex? No hash? How about a proc format wrapped in a call execute? Data _Null_; Length NewString $ 200 ; String = '1-10,21,22,30-35,40,41' ; call execute ( "proc format; value numstr " || String || " ='Nums'; run ;"); Do _K = input(Scan( String , 1 , ',-' ),best12.) To input(Scan( String , -1 , ',-'),best12.); if put(_K,numstr.)='Nums' then NewString = CatX( ',' , NewString , _K ) ; End; Put NewString= ; run; Paul Choate DDS Data Extractio...

Re: Puzzle: Converting 1-10 to 1,2,3,4,5,6,7,8,9,10 #8
You program does not work "the first time" becasue NUMSTR does not exist. 7235 Data _Null_; 7236 Length NewString $ 200 ; 7237 String = '1-10,21,22,30-35,40,41' ; 7238 7239 7240 call execute ( "proc format; value numstr " || 7241 String || 7242 " ='Nums'; run ;"); 7243 7244 Do _K = input(Scan( String , 1 , ',-' ),best12.) To 7245 input(Scan( String , -1 , ',-'),best12.); 7246 if put(_K,numstr.)='Nums' then ------- 484 NOTE 48...

Re: Puzzle: Converting 1-10 to 1,2,3,4,5,6,7,8,9,10 #10
This is absurd - but uses the call execute as I intended.... data strings; String='1-10,21,22,30-35,40,43'; output; String='7-8,11-22,26-35,36'; output; String='9-20,31,32,34-35,41,44'; output; run; Data _Null_; set strings; call execute ( "proc format;value numstr " ||String||"='Nums';run;"); if _n_=1 then call execute (" Data NewStrings(drop=_:); Length NewString $ 200 ; if _n_=1 then do; Do _K = input(Scan('"||String||"',1,',-'),best12.) To input(Scan('"||String||"',-1,',-...

Web resources about - Re: Compiling 1.5.3 or 1.6.1 on Solaris 5.9 - comp.protocols.kerberos

Cool tools for compiling to JavaScript
Every programmer has a favorite language or two. JavaScript lovers are the luckiest these days because their language is taking over the Internet ...

Feds put protest activity under microscope in compiling national 'risk forecast'
Use of social media, the spread of "citizen journalism," and the involvement of young people are among the key trends highlighted by a federal ...

10 Tips For Compiling A Deal Sheet
Compiling a deal sheet is a great way of taking stock of your experience and of seeing where your experience may be lacking.

Compiling 64-Bit Code
Describes the 64-bit features available in OS X.

Is there a benefit to compiling your code as you go?
Stack Exchange This Q&A is part of a weekly series of posts highlighting common questions encountered by technophiles and answered by users ...

6 cool tools for compiling to JavaScript
Every programmer has a favorite language or two. JavaScript lovers are the luckiest these days because their language is taking over the Internet ...

Compiling The Absurd Box Score For Space Jam ; Or, Shawn Bradley Sucked Against Cartoons, Too
This is Regressing, a numbers-minded column by our clever friends at the Harvard College Sports Analysis Collective. Over the next few days, ...

We're Compiling Every Police-Involved Shooting In America. Help Us.
The United States has no database of police shootings. There is no standardized process by which officers log when they've discharged their weapons ...

Flat UI Pro Tutorial: Setting and Compiling Using LESS
In this video tutorial, you use components from Flat UI Pro to create a complete simple mail app using LESS. He takes you through the steps to ...

Industrious 4chan user is compiling a list of every videogame ever made
... me to enter a few hundreds of games into my Backloggery account , and I haven't even finished it yet. Ambitious 4chan user Data_baser is compiling ...

Resources last updated: 3/10/2016 10:05:57 PM