f



RE: Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3

Believe it or not; both solutions seem to work and compilation succeeds
!

#define GET_HOST_BY_NAME(NAME, HP, ERR, TMP) \
    {                                                           \
        (HP) = (gethostbyname_r((NAME), &TMP.ent, &TMP.data)    \
                ? 0                                             \
                : &TMP.data);                                   \
        (ERR) = h_errno;                                        \
    }

Worked and so did...

#define GET_HOST_BY_NAME(NAME, HP, ERR, TMP) \
    {                                                           \
        struct hostent my_h_ent; \
        (HP) = (gethostbyname_r((NAME), &TMP.ent, &TMP.data)    \
                ? 0                                             \
                : &my_h_ent);                                   \
        (ERR) = h_errno;                                        \
    }

Thanks for the help !  I will continue testing with my current install
base on AIX.  I really appreciate the rapid responses and solutions !

Lamar




-----Original Message-----
From: Ken Raeburn [mailto:raeburn@MIT.EDU]
Sent: Monday, September 18, 2006 5:13 PM
To: Marcus Watts
Cc: Saxon, Lamar; kerberos@mit.edu
Subject: Re: Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3

On Sep 18, 2006, at 17:56, Marcus Watts wrote:
> Lamar.Saxon@americredit.com writes:
> ...
>> making all in util...
>> making all in util/support...
>>         cc   -I../../include -I./../../include -I. -I.
>> -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1   -D_LARGE_FILES -DLA
>> L -DLANL_ICN -qhalt=e -O -D_THREAD_SAFE   -c fake-addrinfo.c
>> "fake-addrinfo.c", line 1212.9: 1506-045 (S) Undeclared identifier
>> my_h_ent.
>> make: 1254-004 The error code from the last command is 1.
> ...
>
> I hesitate to recommend this as the totally right answer, but
> it looks like the "#ifdef _AIX" case in util/support/fake-addrinfo.c
> defines a GET_HOST_BY_NAME which doesn't declare any local storage.
> It should probably have a line that reads
> 	struct hostent my_h_ent; \
> inserted immediately before the line that reads
> 	(HP) = (gethostbyname_r((NAME), &TMP.ent, &TMP.data)    \
> (on or around line 178).

I think "&my_h_ent" was supposed to be changed to "&TMP.ent" in that 
macro.  (The "TMP" stuff was because making such narrowly-scoped 
automatic variables may not guarantee that the storage is still live 
when the pointer gets used.  Instead, now the caller has to supply a 
variable of a type controlled in this header, system-specific, that 
holds all the longer-lived storage we need.)

Lamar, could you let me know if that works for you?

Ken





Privileged and Confidential.  This e-mail, and any attachments there to, is intended only for use by the addressee(s) named herein and may contain privileged or confidential information.  If you have received this e-mail in error, please notify me immediately by a return e-mail and delete this e-mail.  You are hereby notified that any dissemination, distribution or copying of this e-mail and/or any attachments thereto, is strictly prohibited.

________________________________________________
Kerberos mailing list           Kerberos@mit.edu
https://mailman.mit.edu/mailman/listinfo/kerberos

0
9/19/2006 2:01:12 AM
comp.protocols.kerberos 5541 articles. 1 followers. jwinius (31) is leader. Post Follow

1 Replies
1415 Views

Similar Articles

[PageSpeed] 15

Lamar.Saxon@americredit.com writes:
> Subject: RE: Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3 
> Date: Mon, 18 Sep 2006 21:01:12 -0500
> Message-ID: <FBA40FC9A555684C8E734FD5F281C6530A683FBC@srvexcharl02.acf.americredit.com>
> From: <Lamar.Saxon@americredit.com>
> To: <raeburn@mit.edu>, <mdw@umich.edu>
> Cc: kerberos@mit.edu
> 
> 
> Believe it or not; both solutions seem to work and compilation succeeds
> !

Right.  Take Ken's solution.  He's correct, there's definitely no
guarantee that automatic storage inside the GET_HOST_BY_NAME block will
still be live afterwards.  Also, my fix of just declaring the storage
isn't good enough; that will probably result in calling the library
gethostbyname_r function, ignoring its results, and instead using
uninitialized storage for the result.

Beware: GET_HOST_BY_ADDR right afterwards also has the automatic
storage problem.  (It doesn't have the unitialized storage problem
because it doesn't use TMP at all.)  You probably aren't hitting that
case since you'd most likely get a compiler error from passing the
wrong # of arguments to the macro if you were using it.

				-Marcus
________________________________________________
Kerberos mailing list           Kerberos@mit.edu
https://mailman.mit.edu/mailman/listinfo/kerberos

0
mdw7111 (62)
9/19/2006 2:44:18 AM
Reply:

Similar Artilces:

Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3
Any one had any success compiling KRB5 1.5.1 on AIX 5.2 or 5.3 ? I am experiencing the same errors as a previous poster; but have not seen any solutions. Configure is successful with the following flags: export CC=cc export CFLAGS='-D_LARGE_FILES -DLANL -DLANL_ICN'; export CFLAGS ../configure --prefix=/usr/local/kerberos --enable-dns-for-realm --with-tcl=/usr/local --with-vague-errors Same config I use to compile 1.4.4 successfully with the LANL patches provided by Milton Turley. After running make, I get the following errors: making all in util... making all in util/support... cc -I../../include -I./../../include -I. -I. -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1 -D_LARGE_FILES -DLA L -DLANL_ICN -qhalt=e -O -D_THREAD_SAFE -c fake-addrinfo.c "fake-addrinfo.c", line 1212.9: 1506-045 (S) Undeclared identifier my_h_ent. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. Same errors on AIX 5.2 as well as AIX 5.3. Also, same errors with CC or GCC 4. Any help is appreciated and I can beta test any patches. Thanks ! Lamar Privileged and Confidential. This e-mail, and any attachments there to, is intended only for use by the addressee(s) named herein and may contain privileged or confidential information. If you have received this e-mail in error, please notify me immediately by a return e-mail and ...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #5
Phil, Tested on AIX 5.3 TL05 SP4 with XLC++/XLC 8.0 and worked great ! I will be testing on AIX 5.2 TL09 SP3 and AIX 4.3 ML11 here shortly... Thanks for getting this figured out ! Also, appreciate the help from Sam and Martin who were working on it too... Lamar -----Original Message----- From: Phil Pishioneri [mailto:pgp@psu.edu] Sent: Wednesday, February 07, 2007 6:35 PM To: Saxon, Lamar Cc: kerberos@mit.edu Subject: Re: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 I've gotten 1.5.x and 1.6 to build and run on AIX 5.2 (domain referral in 1.6 works nicely). So far I have only tested the client commands: klist, kvno, kinit, kdestroy. No 3rd party software tested yet, either. This was done with the IBM VisualAge C++ Professional / C for AIX Compiler, Version 6. The one major change: add LDFLAGS="-brtl" to configure. My configure line was (prefix edited): ./configure --without-krb4 --prefix=... CC=cc LDFLAGS=-brtl There was one problem during the 1.{5,6} builds (1.5 has a bug that's been documented already), it failed in making all in plugins/kdb/db2/libdb2/test... with ld: 0706-006 Cannot find or open library file: -l db ld:open(): A file or directory in the path name does not exist. my quick&dirty fix for that was (starting in .../krb5-1.6/src/): cd lib ln -s ../plugins/kdb/db2/libdb2/libdb.so.1.1 libdb.so.1.1 ln -s libdb.so.1.1 libdb.so -Phil Privileged and Confidential. This e-mail, and any attac...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #3
Thanks. The problem also exist using GNU ld on AIX too. See below: make[2]: Entering directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc' making all in lib/rpc/unit-test... make[3]: Entering directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc/unit-test' cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -g -qhalt=e -O -D_THREAD_SAFE -o client client. o rpc_test_clnt.o \ -lgssrpc -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): No such file or directory ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): No such file or directory ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): No such file or directory make[3]: *** [client] Error 255 make[3]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc/unit-test' make[2]: *** [all-recurse] Error 1 make[2]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib/rpc' make[1]: *** [all-recurse] Error 1 make[1]: Leaving directory `/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src/lib' make: *** [all-recurse] Error 1 root@aoctoolbox:/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src:> whence ld /usr/local/bin/ld root@aoctoolbox:/usr/sys/inst.images/MIT-Kerberos/krb5-1.6/5.3/src:> ld -v GNU ld version 2.16 Lamar -----Original Message----- From: Russ Al...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #2
Exact same errors specifying --without-tcl. I removed the config.cache, config.log, and etc the reran configure. From my configure line - ../configure --prefix=/usr/local/kerberos --enable-dns-for-realm --without-tcl --with-vague-errors Then after make... making all in lib/rpc/unit-test... Target "all" is up to date. cc -I../../../include -I./../../../include -I. -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1 -g -qhalt=e -O _THREAD_SAFE -c client.c cc -I../../../include -I./../../../include -I. -DKRB5_DEPRECATED=1 -DKRB5_PRIVATE=1 -g -qhalt=e -O _THREAD_SAFE -c rpc_test_clnt.c cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -g -qhalt=e -O -D_THREAD_SAFE -o c nt client.o rpc_test_clnt.o -lgssrpc -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): A file or directory in the path name does not exist. make: 1254-004 The error code from the last command is 255. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. Any ot...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3
I currently have an install of KRB5 1.4.4 on this machine and configure finds it under /usr/local/Kerberos where it is installed as seen in the blibpath option. I am currently trying without TCL and will update on what happens. Lamar -----Original Message----- From: Russ Allbery [mailto:rra@stanford.edu] Sent: Thursday, January 25, 2007 10:38 PM To: Saxon, Lamar Cc: kerberos@mit.edu Subject: Re: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 Lamar.Saxon@americredit.com writes: > Has any been able to successfully compile KRB5 v1.5.1, v1.5.2, or v1.6 > on AIX 5.2 or 5.3 ? If so, can you send me you configs ? I have posted > this message before, but no one seems to be able to help. I have > successfully compiled KRB5 1.4.4 on AIX 4.3 / 5.2 / 5.3; but since the > release of 1.5.1 and beyond, I am cannot get it to work. All of the > versions seem to error out here: > making all in lib/rpc/unit-test... > Target "all" is up to date. > cc -L../../../lib > -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -D_LARGE_FILES -DLANL > -DL > ANL_ICN -qhalt=e -O -D_THREAD_SAFE -o client client.o rpc_test_clnt.o > -lgssrpc -lgssapi_krb5 -lkr > b5 -lk5crypto -lcom_err -lkrb5support -lpthreads > ld: 0706-006 Cannot find or open library file: -l k5crypto You can't build the test suite until you install Kerberos. If you don't already have Kerberos installed, don't build the test suite (which I think may be impl...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #4
The compile likes GNU ld and GCC even worse. I move the ld link to force the use of the GNU linker. Here is the latest output using GCC 4.0.1 and ld 2.16. + gcc -shared -v -o libkrb5support.so.0.1 threads.o init-addrinfo.o plugins.o errors.o gmt_mktime.o fake-addrinfo. o -nostartfiles -Xlinker -bgcbypass:1 -Xlinker -bfilelist -Xlinker -bM:SRE -Xlinker -bE:./libkrb5support.exports - Xlinker -bernotok -Xlinker -brtl -lpthreads -lc -Wl,-binitfini::krb5int_thread_support_fini:2 Using built-in specs. Target: powerpc-ibm-aix5.3.0.0 Configured with: ../gcc-4.1.1/configure --disable-nls Thread model: aix gcc version 4.1.1 /usr/local/libexec/gcc/powerpc-ibm-aix5.3.0.0/4.1.1/collect2 -bpT:0x10000000 -bpD:0x20000000 -btextro -bnodelcsec t -bM:SRE -bnoentry -o libkrb5support.so.0.1 -L/usr/local/lib/gcc/powerpc-ibm-aix5.3.0.0/4.1.1 -L/usr/local/lib/gc c/powerpc-ibm-aix5.3.0.0/4.1.1/../../.. threads.o init-addrinfo.o plugins.o errors.o gmt_mktime.o fake-addrinfo.o -bgcbypass:1 -bfilelist -bM:SRE -bE:./libkrb5support.exports -bernotok -brtl -lpthreads -lc -binitfini::krb5int_th read_support_fini:2 -lgcc_s -lc -lgcc_s /usr/local/bin/ld: -static and -shared may not be used together collect2: ld returned 1 exit status make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. Again, any and all help appreciated... Lamar -----Original Message----- From:...

RE: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #6
Wasn't really the solution I came up with; but it worked. You might be correct since now the OpenSSL binaries will not build against the Kerberos libraries currently. libssl and libcrypto build fine along with everything else; but the actual openssl binary fails. Phil, Have you successfully linked OpenSSL with the new Kerberos libraries ? Thanks, Lamar -----Original Message----- From: Sam Hartman [mailto:hartmans@mit.edu] Sent: Friday, February 09, 2007 10:18 AM To: Saxon, Lamar Cc: pgp@psu.edu; kerberos@MIT.EDU Subject: Re: KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 Do you really want rtl as a linker flag? Isn't that going to be an issue for people linking against the kerberos libraries. Why is that the right solution? Privileged and Confidential. This e-mail, and any attachments there to, is intended only for use by the addressee(s) named herein and may contain privileged or confidential information. If you have received this e-mail in error, please notify me immediately by a return e-mail and delete this e-mail. You are hereby notified that any dissemination, distribution or copying of this e-mail and/or any attachments thereto, is strictly prohibited. ________________________________________________ Kerberos mailing list Kerberos@mit.edu https://mailman.mit.edu/mailman/listinfo/kerberos ...

KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3 #2
I have seen several emails from different people over the last few months on trying to get KRB5 1.5 or later to compile on AIX 5.x. And no responses that fix the problem. I have had the same problem and can only presume that Kerberos is no longer supported on AIX. Is this the case? No Kerberos on AIX? It just won't compile anymore with the changes to shared libraries. ________________________________________________ Kerberos mailing list Kerberos@mit.edu https://mailman.mit.edu/mailman/listinfo/kerberos >>>>> "Grant," == Grant, Martin <Martin.Grant@fmr.com> writes: Grant,> I have seen several emails from different people over the Grant,> last few months on trying to get KRB5 1.5 or later to Grant,> compile on AIX 5.x. And no responses that fix the Grant,> problem. I have had the same problem and can only presume Grant,> that Kerberos is no longer supported on AIX. Is this the Grant,> case? No Kerberos on AIX? It just won't compile anymore Grant,> with the changes to shared libraries. We no longer run AIX tests. Our donated AIX box was very old and slow, and its disk was in the process of dieing. If there's no one out there in the Kerberos development community who cares enough about AIX to get the betas, test them and send bug fixes, then yes, AIX support is going to be fairly bad. Kerberos is an open-source product; if you want it to work better on your pl...

KRB5 1.5 or 1.6 compiled on AIX 5.2/5.3
Has any been able to successfully compile KRB5 v1.5.1, v1.5.2, or v1.6 on AIX 5.2 or 5.3 ? If so, can you send me you configs ? I have posted this message before, but no one seems to be able to help. I have successfully compiled KRB5 1.4.4 on AIX 4.3 / 5.2 / 5.3; but since the release of 1.5.1 and beyond, I am cannot get it to work. All of the versions seem to error out here: making all in lib/rpc/unit-test... Target "all" is up to date. cc -L../../../lib -blibpath:/usr/local/kerberos/lib::/usr/lib:/lib -D_LARGE_FILES -DLANL -DL ANL_ICN -qhalt=e -O -D_THREAD_SAFE -o client client.o rpc_test_clnt.o -lgssrpc -lgssapi_krb5 -lkr b5 -lk5crypto -lcom_err -lkrb5support -lpthreads ld: 0706-006 Cannot find or open library file: -l k5crypto ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l com_err ld:open(): A file or directory in the path name does not exist. ld: 0706-006 Cannot find or open library file: -l krb5support ld:open(): A file or directory in the path name does not exist. make: 1254-004 The error code from the last command is 255. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. make: 1254-004 The error code from the last command is 1. Stop. I have tried using GCC 4.0 and IBM XLC/XLC++ 8.0 with no success and failures at the same point. My confi...

Re: [tao-users] ACE 5.3.5 + TAO 1.3.5 + CIAO 0.3.5 beta released #2 #2
Hi Alex, > What are OCI's plan's for a supported TAO 1.4 release and developer > guide? Will this effect the release of the 1.3 guide? This is an excellent question - I'm sure Malcolm Spence will pitch in when he has a chance and I suspect that OCI will be supporting TAO 1.4 in due time. None of the changes in TAO 1.4 should affect the relevance of the info in the TAO 1.3 developer's guide - there's just more new stuff to document as time permits. Take care, Doug ...

Need to take mksysb backup of AIX 5.2 & 5.1 on AIX 5.1 Server.
Hi All Need docmented notes of step by step installing NIM Server on AIX 5.1 Server. Send me also documented notes on installing the NIM client for Aix 5.2 & 5.1. You can send the docs to prsanwal@gmail.com mail account. Awaiting your quick response. Warm Regards Prateek S How about go search IBM's web site and use the man pages... then if you get stuck, come back here and ask for help... We're not here to do your job for you. seriously! jeez prateek... have a little tact man! you want us to find you a bunch of documentation and mail it to you? and quickly? come on dude... ...

Installing AIX 5.1, 5.2 and 5.3 on a single server
Hi all, Is there any way to install different versions of AIX (from 5.1 to 5.3) on a single server? And to make them work simultaneously? I heard of LPAR but I am not sure it is possible to do such a thing with this feature... Thx for your help in advance. Regards The_Nail wrote: > Hi all, > > Is there any way to install different versions of AIX (from 5.1 to > 5.3) on a single server? And to make them work simultaneously? > I heard of LPAR but I am not sure it is possible to do such a thing > with this feature... > > > Thx for your help in advance. > Regar...

Re: [tao-users] ACE 5.3.5 + TAO 1.3.5 + CIAO 0.3.5 beta released #2
Hi Tom, > We are currently arm-wrestling with TAO-1.3.3 on VxWorks-5.5/Tornado-2.2 > built with non-native exceptions and with implicit templates. Implicit > templates are desirable since we are now using STL and those nested > templates make explicit instantiation almost impossible. Non-native > exceptions are important since native exceptions lead to a factor of 4.5 > increase in code size (!!). > > Implicit templates cause trouble with singletons, since the VxWorks-2.x > loader does not respect weakly-defined symbols, so one can not load > multiple mo...

[ace-users] Tests failed : ACE 5.5.2 - AIX 5.3
Hi, My first mail before my message in the group failed (my subscription was not activated). The PRF below describes my problems. I can compile and link but several ACE's tests fail. I only use ACE library and only compile it by cd'ing in the ace directory before running make. I already made some fixes described below to compile and to link the library. I'm not abble to interpret the faild tests to identify the problem source or area. I didn't find the scoreboard before my mail. I see that several tests fails for all compilations on AIX. I try to reassure myself by looking these results, it's not only for my configuration. But it's a daily build with last development version. For the 5.5.2 stable version they should probably not fail ? Regards, PO Houot. ACE VERSION: 5.5.2 HOST MACHINE and OPERATING SYSTEM: bash-3.00$ uname -a AIX localhost 3 5 0040983B4C00 unknown unknown AIX bash-3.00$ oslevel -r 5300-05 TARGET MACHINE and OPERATING SYSTEM, if different from HOST: Same as host COMPILER NAME AND VERSION (AND PATCHLEVEL): bash-3.00$ g++ -v Using built-in specs. Target: powerpc-ibm-aix5.3.0.0 Configured with: ../gcc-4.1.1/configure --disable-nls Thread model: aix gcc version 4.1.1 This compiler is installed from packages provided by UCLA AIX Software library THE $ACE_ROOT/ace/config.h FILE : bash-3.00$ more $ACE_ROOT/ace/config.h #include "ace/config-aix-5.x.h" T...

AIX 5.2 and AIX 5.3
I have an AIX 5.1 system I'm planning on upgrading to either 5.2 or 5.3. I don't have the install media for 5.3 though and I think IBM might charge me to get one so I was thinking of starting with 5.2. However, I had an undesirable experience with 5.2 where I was at ML 4 and had to do a disaster recovery restore. I only had my original 5.2 install media and found that to do a restore from mksysb I had to have 5.2 install media at the ML 4 level or it wouldn't work. Does anyone know if that was an issue with ML 4 or with 5.2? I mean if you have you system at ML 6 on 5....

Error making krb5-1.5.1 on AIX 5.3 TL 5
When running make on krb5-1.5.1 I get the following errors: Target "all" is up to date. gcc -L../../../lib -Wl,-blibpath:/usr/krb5/lib::/usr/lib:/lib -g -O2 -Wa ll -Wmissing-prototypes -Wcast-qual -Wcast-align -Wconversion -Wshadow -pedanti c -L/usr/linux/lib,Wl,-brtl,-blibsuff:so -o client client.o rpc_test_clnt.o -lg ssrpc -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lkrb5support ld: 0711-317 ERROR: Undefined symbol: krb5_gss_dbg_client_expcreds ld: 0711-317 ERROR: Undefined symbol: gssrpc_auth_debug_gssapi ld: 0711-317 ERROR: Undefined symbol: gssrpc_misc_debug_gssapi ld: 0711-317 ERROR: Undefined symbol: gssrpc_svc_debug_gssapi ld: 0711-317 ERROR: Undefined symbol: ..gssrpc_auth_gssapi_create_default ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information. collect2: ld returned 8 exit status make: 1254-004 The error code from the last command is 1. Stop. The OS is AIX 5.3 TL 5. gcc is (GCC) 3.3.3. Configure looks like: export LIBPATH=/lppdir/build/krb5/krb5/src/lib:/usr/local/lib:/usr/linux/lib:$LI BPATH export LDFLAGS="-L/usr/linux/lib,Wl,-brtl,-blibsuff:so" ../configure --with-cc=gcc \ --enable-shared \ --libdir=/usr/krb5/lib \ --disable-thread-support Any ideas? I was able to get through these errors by finding the compiled library in the src tree, copying it to /usr/lib and linking it to a lib.a file. For example to fix the error "ld: 0711-317 ERROR: Undefined symbol: krb5_gss_dbg_client_expcreds&...

moving xlc 5.0.1 on aix 4.3 to aix 5.2?
We are upgrading our B50 with AIX 4.3.3 to AIX 5.2 We currently use C for AIX xlc 5.0.1 on AIX 4.3.3. I remember reading xlc 5.0.2 is required to be used for AIX 5.2. Does this mean we have to purchase a new compiler, or is there an upgrade available. thank you sol sol gongola wrote: > We are upgrading our B50 with AIX 4.3.3 to AIX 5.2 > We currently use C for AIX xlc 5.0.1 on AIX 4.3.3. > > I remember reading xlc 5.0.2 is required to be used for > AIX 5.2. Does this mean we have to purchase a new > compiler, or is there an upgrade available. Just install updates....

perl 5.8.2.0 base fileset is in AIX 5.2 or is in 5.3?
Did this base fileset first appear in 5.2 or did it first appear in 5.3? (I don't have 5.3 hosts, so I can't check that.) Thanks! -Dan Dan Foster wrote: > Did this base fileset first appear in 5.2 or did it first appear in 5.3? > > (I don't have 5.3 hosts, so I can't check that.) > > Thanks! > > -Dan Not really sure, but I think appearance was with 5.3. Checking at my site and found the highest level on a 5.2 machine was 5.8.1.12 - never seen a 5.8.2.0 on a 5.2 machine In article <dqgafi$jfe$1@online.de>, Friedhelm Neyer <Friedhelm.Neyer...

Dual booting AIX 5.1 and AIX 5.3
I am having trouble switching to the AIX 5.3 system from AIX 5.1 - I have no problems going the other way. The system hangs on reboot after putting up the starting software message with the LED set on E140. I am using bootlist to switch between 2 SCSI boot disks. The problems only to seem to have arisen when I upgraded the first disk from AIX 5.2 to 5.3. I can recover by booting off the 5.3 CDROM and then aborting the boot and when I now restart the system it successfully comes up in AIX 5.3. Just to complicate matters the AIX 5.1 system runs in 32-bit mode and the AIX 5.3 in 64-bit mode. Joh...

mixing AIX 5.2 and AIX 5.3 on power5?
Looks like I may get a p550q soon. I'm not allowed to migrate the existing applications (yet) to 5.3. I want to install a 5.3 LPAR and begin understanding the VIO layers. Can I mix 5.2 and 5.3 LPARs on the same p550q? I know the 5.2 must be at the whole CPU level and the 5.3 could use portions of a single CPU. Anything else? Mike yes you can have 5.2 & 5.3 on different lpars on the same p550, and yes, you need 5.3 to do micropartitioning with the cpu's. with 5.3 you can also run your lpars in uncapped mode so that unused processing units can be accessed by your active partitio...

Re: [tao-users] ACE 5.3.5 + TAO 1.3.5 + CIAO 0.3.5 beta released
Hi Folks, It's been about a year since we released ACE 5.3 and TAO 1.3. We are therefore planning to release ACE 5.4 and TAO 1.4 by mid-December. The ACE+TAO x.3.5 beta that Venkita just announced will be the penultimate beta towards that goal. In addition to all the enhancements that he mentioned in the release notes, we also plan to add the following enhancements before the x.4 release: ---------------------------------------- .. ACE subsetting enhancements .. ORB footprint and compilation-time enhancements .. CORBA Security Service capabilities .. Load Balancing Servi...

JAVA 1.5 for AIX 5.3 #2
HI, I need to install JAVA 1.5 on My AIX 5.3 machine ...I tried but i did not get any links for download ...Can any one send me any links for downloading it........ Thanks in advance Sagar ...

if time = 3 seconds, how do i set the values of the time steps 0,0.1,0.2,0.3,0.5,1.0,1.5,2.0,3.0,5.0 to -9999 from time =3 seconds
Hi &nbsp; I have 18 inputs (arrays) which contain certain statistics and if time&nbsp;&nbsp;= 3 seconds, set the values of time step 5.0 to -9999.0. &nbsp; I was wondering if there is an efficient way to do this without using a lot of case statements? &nbsp; Thank you. Hello AdrianT, it's not really clear to me what you want to do... I suspect: you have an array containing values and you want to output them with a fixed timing of 3 seconds: you should use a for loop autoindexing trough your array and sending the value to your indicator/output/whatever. Put a "wait for next multiple" into your for loop. Or do you want to have a minimum time delay of 3 seconds? Again use a for loop, get the time value and use a InRange&amp;Coerce with minimum set to 3 seconds... Or you should explain more precisely what you need... Hi Thanks for that. Let me explain. &nbsp; The time may vary. Let me give an example. if time&nbsp; = 2.1, I want to set the time step's &nbsp;3.0 and 5.0's values to -9999.0. if the time =0.1 seconds then I want to set 0.2,0.3, 0.5 etc values to -9999.0 etc .................................................................... &nbsp; Can you please help? Thank you. Hello TUDS, do you use different accounts/nicknames ? Well, that's easy, at least for a sorted array: Search for your time-value in the array (Threshold 1D array). Fill all elements from that index till the end with your "error...

Problems building Apache-1.3.33 on AIX 5.2/5.3
Hello all, I am getting the following errors while building apache 1.3.33 on my AIX 5.2 and 5.3 machines:- ===> src/main gcc -c -I../os/unix -I../include -DAIX=520 -U__STR__ -DAIX_BIND_PROCESSOR -DUSE_HSREGEX -DUSE_EXPAT -I../lib/expat-lite -DNO_DL_NEEDED `../apaci` http_main.c In file included from http_main.c:597: /usr/include/pthread.h:556: error: parse error before '*' token /usr/include/pthread.h:559: error: parse error before '*' token /usr/include/pthread.h:563: error: parse error before '*' token /usr/include/pthread.h:566: error: parse error befo...

Web resources about - RE: Kerberos 5 v1.5.1 on AIX 5.2 or AIX 5.3 - comp.protocols.kerberos

Kerberos (protocol) - Wikipedia, the free encyclopedia
MIT developed Kerberos to protect network services provided by Project Athena . The protocol is based on the earlier Needham-Schroeder Symmetric ...

Trekkies miss out after push to name Pluto moon 'Vulcan' fails; Kerberos and Styx chosen instead
BAD news, 'Star Trek' fans: Pluto's fourth and fifth moons have been named Kerberos and Styx, despite 'Vulcan' being the top suggestion.

Meet Pluto's smallest moons: Kerberos and Styx
Pluto's two smallest known moons have been officially named after characters associated with the underworld of Greek and Roman mythology.

Pluto's moons named Styx and Kerberos, despite vote for Vulcan
... Astronomical Union vetoed a public vote to name one of Pluto's two most recently discovered moons Vulcan and named the moons Styx and Kerberos. ...

Meet Styx and Kerberos, Pluto's newly named moons
... of new moons orbiting Pluto (at SETI's behest), it decided to do some planetoid naming, too. Today, SETI announced those names: Styx and Kerberos. ...

Microsoft Issues Emergency Patch for Kerberos Bug
The vulnerability could enable an attacker to elevate privileges. Microsoft recommends that organizations consider rebuilding their Windows domains. ...

Kerberos Productions Offers Expertise to President on the Weaponization of Outer Space
... game violence to the President and Vice-President of the United States, Sword of the Stars 1 & 2, Fort Zombie, and NorthStar developer Kerberos ...

The fourth and fifth moons of Pluto have officially been named Kerberos and Styx, respectively.
The fourth and fifth moons of Pluto have officially been named Kerberos and Styx , respectively. The Earth's moon is still named fucking "Aiden." ...

Poll For Pluto's Moons Closes, Vulcan and Kerberos Win - Geekosystem
First the SETI Institute put it up for vote, then the geeks and nerds swarmed the Internet, and now it's as certain as it can be before the International ...

Kerberos unleashed at last: Pluto’s dog-bone moon poses another mystery
NASA’s New Horizons probe has finally filled out its family portrait of Pluto and its moons – and Kerberos, the last moon to get its closeup, ...

Resources last updated: 3/10/2016 2:16:01 PM