Ntpd time offset threshold #2 - comp.protocols.time.ntp

Similiar Articles:

How to force ntpd to set time first time if clock is withhin ...
If the local clock time of the client is less than ... [ntp:questions] Re: Ntpd time offset threshold Question ... The first-level time servers are primarily intended to ...

ntpd, boot time, and hot plugging - comp.protocols.time.ntp ...
... network time sync ... ntpd exits with a message to the system log if the offset exceeds the panic threshold, which is 1000 s by default. This option allows the time to be ...

Time going backwards - comp.protocols.time.ntp
Hi Folks, I have some questions about when (if ever) NTP will set time backward. ... When the offset exceeds this threshold the clock is stepped. > Is there a simple ...

Stabilizing the drift file? - comp.protocols.time.ntp
So, even if you shorten the stepout threshold to five ... separates the frequency measurement from the time offset ... Stabilizing the drift file? - comp.protocols.time.ntp ...

NTP and Cron - comp.protocols.time.ntp
... to make sure that NTP can't do that. Do you have to specify a threshold for time ... reason, has a large offset compared to "true" time ... ntp is the Network Time Protocol ...

stepping and slewing - comp.protocols.time.ntp
... offset < 1000s) : 1000 seconds == the default panic threshold. ntpd will abort when it sees an offset ... protocols.time.ntp stepping and slewing - comp.protocols.time.ntp ...

rfc2030: UDP source port and destination port 123 - comp.protocols ...
Or, note the time offset of the local ... the type of accuracy that NTP is designed to provide. If you're looking for that level ... RFC 2030 - Simple Network Time Protocol ...

Linux NTP Polling - comp.protocols.time.ntp
... your server thinks it is offset from the upstream time ... which allows a one time "step" though I believe the panic threshold still ... This program is a Simple Network Time ...

Single best NTP status indicator of clock accuracy? - comp ...
... tolerance: 512 ppm > What confidence level ... > Offset. That is ntp's best guess as to the difference ... Network Time Protocol: Best Practices White Paper ...

Test ntpd performance - comp.protocols.time.ntp
... refid st t when poll reach delay offset jitter ... the socket and then do spoit-checks on the link-level ... Test ntpd performance - comp.protocols.time.ntp ntpd does ...

[ntp:questions] Re: Ntpd time offset threshold
In article <mailman.82.1118307363.91305.questions at lists.ntp.isc.org>, Eric Liu <EricLiu at moxrd.com> wrote: > The offset threhold is 128ms by default.

ntpd - Network Time Protocol (NTP) daemon - ECE/CIS
ntpd - Network Time Protocol (NTP) Daemon from The Wizard of Oz, L. Frank ... Normally, ntpd exits with a message to the system log if the offset exceeds the panic threshold ...

7/8/2012 4:42:02 PM