f



Unsupported option "GSSAPIAuthentication"

Hello,

On Solaris 8 and 10, when I set the configuration option
GSSAPIAuthentication to yes (either in ssh_config or in command line),
I see unsupported option error. Could somebody point out where the
problem could be?

Here are SSH versions on these machines:

dev3:~ amptest$
dev3:~ devuser$ klist
Ticket cache: /tmp/krb5cc_107
Default principal: devuser@ROKDC.COM

Valid starting                       Expires
Service principal
Mon Dec 17 12:50:57 2007  Mon Dec 17 22:50:57 2007  krbtgt/
ROKDC.COM@ROKDC.COM
dev3:~ amptest$
dev3:~ devuser$ echo $KRB5CCNAME
/tmp/krb5cc_107
dev3:~ amptest$
dev3:~ devuser$ ssh -v -o "GSSAPIAuthentication=yes" dev7.mydomain.com
OpenSSH_3.9p1, OpenSSL 0.9.7e 25 Oct 2004
command-line line 0: Unsupported option "GSSAPIAuthentication"
..
..
..
debug1: Host 'dev7.mydomain.com' is known and matches the RSA host
key.
debug1: Found key in /export/home/devuser/.ssh/known_hosts:23
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey,gssapi-with-
mic,password
debug1: Next authentication method: publickey
debug1: Trying private key: /export/home/amptest/.ssh/identity
debug1: Trying private key: /export/home/amptest/.ssh/id_rsa
debug1: Trying private key: /export/home/amptest/.ssh/id_dsa
debug1: Next authentication method: password
devuser@dev7.mydomain.com's password:
0
12/17/2007 6:14:01 PM
comp.security.ssh 4228 articles. 0 followers. terra1024 (490) is leader. Post Follow

1 Replies
1848 Views

Similar Articles

[PageSpeed] 19

On 2007-12-17, ranga <rangasamudrala@gmail.com> wrote:
> Hello,
>
> On Solaris 8 and 10, when I set the configuration option
> GSSAPIAuthentication to yes (either in ssh_config or in command line),
> I see unsupported option error. Could somebody point out where the
> problem could be?
[...]
> dev3:~ devuser$ ssh -v -o "GSSAPIAuthentication=yes" dev7.mydomain.com
> OpenSSH_3.9p1, OpenSSL 0.9.7e 25 Oct 2004
> command-line line 0: Unsupported option "GSSAPIAuthentication"

Your SSH client was built without Kerberos and GSSAPI support.  You
need to rebuld it with "./configure --with-kerberos5" (assuming you
have all of the required bits on your system).

-- 
Darren Tucker (dtucker at zip.com.au)
GPG key 8FF4FA69 / D9A3 86E9 7EEE AF4B B2D4  37C9 C982 80C7 8FF4 FA69
    Good judgement comes with experience. Unfortunately, the experience
usually comes from bad judgement.
0
dtucker1 (251)
12/28/2007 7:48:06 PM
Reply:

Similar Artilces:

""""""""""""""""""""""ADD ME""""""""""""""""""""
Hi , Hope you are doing great. Please let me take this opportunity to introduce myself, Iam Karthik working with BhanInfo Inc, a NY based company. We have consultants on our bench on various technologies, my request is to add me to your distribution list and kindly do send me the requirements. i have the below list available 1. Mainframe 2. Java 3.. Financial Analyst 4. Data Architect If there is any vendor ship agreement which has to be signed then I would like to take an opportunity to represent my company and expect your cooperation... We look forward to build a ve...

"""""""""ADD ME""""""""""
Hi , Hope you are doing great. Please let me take this opportunity to introduce myself, Iam Karthik working with BhanInfoi Inc, a NY based company. We have consultants on our bench on various technologies, my request is to add me to your distribution list and kindly do send me the requirements. i have the below list available 1. Mainframe 2. Java 3.. Financial Analyst 4. Data Architect If there is any vendor ship agreement which has to be signed then I would like to take an opportunity to represent my company and expect your cooperation... ...

Urgent Requirement in """""""""""""NEW YORK""""""""""""""""
Hello Partners, Please find the requirement below. Please send the updated resume along with rate and contact no. REQ#1: Title : Java Developer ( Rating Project) Duration : 6 months Rate : open Location : NY strong java, WebLogic 9.2, Web Services, Oracle REQ#2: Title : Java Developer Duration : 4 months Rate : open Location : NY Strong java, SQL REQ#3: Title : VB.Net Consultant Location : NY Duration : 4 months Rate : open Primarily looking at someone who has Excel, VB.net and Oracle (good to have). Req #4: Title : Java Developer (MSA Project) Duration : 6+ months Rate : open Location : NY Note : Please send your updated resume along with contact no karthik@bhaninfo.com : No phone calls please. Thanks & Regards Karthik BhanInfo karthik@bhaninfo.com ...

"or" and "and"
Hi, I'm just getting to discover ruby, but I find it very nice programming language. I just still don't understand how the "or" and "and" in ruby... I was playing with ruby and for example made a def to print Stem and Leaf plot (for those who didn't have a statistics course or slept on it, e.g. http://cnx.org/content/m10157/latest/) Here is the Beta version of it: class Array def n ; self.size ; end def stem_and_leaf(st = 1) # if st != (2 or 5 or 10) then ; st = 1 ; end k = Hash.new(0) self.each {|x| k[x.to_f] += 1 } k = k.sort{|a, b| a[0].to_f <=&g...

"out" and "in out"
Hi i found the following explaination: In Ada, "in" parameters are similar to C++ const parameters. They are effectively read-only within the scope of the called subprogram. Ada "in out" parameters have a reliable initial value (that passed in from the calling subprogram) and may be modified within the scope of the called procedure. Ada "out" parameters have no reliable initial value, but are expected to be assigned a value within the called procedure. What does "have no reliable initial value" mean when considering the "out" parameter? By c...

"my" and "our"
Hi, while testing a program, I erroneously declared the same variable twice within a block, the first time with "my", the second time with "our": { my $fz = 'VTX_Link'; .... ( around 200 lines of code, all in the same block) our $fz = 'VTX_Linkset'; ... } So the initial contents of the $fz declared with "my" is lost, because "our" creates a lexical alias for the global $fz, thus overwriting the previous "my" declaration. It was my error, no question. But I wonder why Perl doesn't mention this - even with "use s...

about "++" and "--"
why this program snippet display "8,7,7,8,-7,-8" the program is: main() { int i=8; printf("%d\n%d\n%d\n%d\n%d\n%d\n",++i,--i,i++,i--,-i++,-i--); } > why this program snippet display "8,7,7,8,-7,-8" Ask your compiler-vendor because this result is IMHO implementation-defined. Check this out: http://www.parashift.com/c++-faq-lite/misc-technical-issues.html#faq-39.15 http://www.parashift.com/c++-faq-lite/misc-technical-issues.html#faq-39.16 Regards, Irina Marudina fxc123@gmail.com wrote: > why this program snippet display "8,7,7,8,-7,-8&q...

"If then; if then;" and "If then; if;"
I have a raw data set which is a hierarchical file: H 321 s. main st P Mary E 21 F P william m 23 M P Susan K 3 F H 324 S. Main St I use the folowing code to read the data to creat one observation per detail(P) record including hearder record(H): data test; infile 'C:\Documents and Settings\retain.txt'; retain Address; input type $1. @; if type='H' then input @3 Address $12.; if type='P' then input @3 Name $10. @13 Age 3. @16 Gender $1.; run; but the output is not what I want: 1 321 s. main H 2 321 s. main P Mary E 21 F 3 321 s...

why "::", not "."
Why does the method of modules use a dot, and the constants a double colon? e.g. Math::PI and Math.cos -- Posted via http://www.ruby-forum.com/. On Oct 26, 2010, at 01:48 , Oleg Igor wrote: > Why does the method of modules use a dot, and the constants a double > colon? > e.g. > Math::PI and Math.cos For the same reason why inner-classes/modules use double colon, because = they're constants and that's how you look up via constant namespace. Math::PI and ActiveRecord::Base are the same type of lookup... it is = just that Base is a module and PI is a float....

"/a" is not "/a" ?
Hi everybody, while testing a module today I stumbled on something that I can work around but I don't quite understand. >>> a = "a" >>> b = "a" >>> a == b True >>> a is b True >>> c = "/a" >>> d = "/a" >>> c == d True # all good so far >>> c is d False # eeeeek! Why c and d point to two different objects with an identical string content rather than the same object? Manu Emanuele D'Arrigo wrote: >>>> c = "/a" >>>&...

Urgent Requirement for """""""""""""""INFORMATICA DEVELOPER"""""""""""""
Hello Partners, How are you ? Please find the requirements below. Title: Database/ETL Developer Duration: 6 months Location: NY Exp: 7+ Locals preferred Database/ETL requirements (Mandatory) Candidate must have worked with financial instruments, preferably Mutual Funds but, Equities are also ok. PL/SQL - packages, Stored procs, Functions, Aggregate functions, Pipelined Functions Informatica 8.6 - especially complex mappings, complex maplets, complex workflows, transformations Oracle 10g/11g Unix/Linux shell scripting ...

Urgent need """""""""""INFORMATICA DEVELOPER"""""""""""""
Hello Partners, How are you ? Please find the requirements below. Title: Database/ETL Developer Duration: 6 months Location: NY Exp: 7+ Locals preferred Database/ETL requirements (Mandatory) Candidate must have worked with financial instruments, preferably Mutual Funds but, Equities are also ok. PL/SQL - packages, Stored procs, Functions, Aggregate functions, Pipelined Functions Informatica 8.6 - especially complex mappings, complex maplets, complex workflows, transformations Oracle 10g/11g Unix/Linux shell scripting Database/ETL requirements (Optional) Data warehousing experience Threading and job concepts in 10g/11g Cost based Optimizer concepts in 10g/11g Must : Experience with XML files and partitioning concepts in Oracle, Collections, Material Views Note : No phone calls please. : send Resumes to karthik@bhaninfo.com Thanks & Regards Karthik BhanInfo karthik@bhaninfo.com ...

Does it need a ";" at the very after of "if" and "for"
write code like: int main(void) { int a=10; if(a<20) {} } Compiler ok on dev-cpp . don't we have to add a ";" after if statement? marsarden said: > write code like: > > int main(void) > { > int a=10; > if(a<20) > {} > } > > Compiler ok on dev-cpp . don't we have to add a ";" after if > statement? The syntax for 'if' is: if(expression) statement There is no semicolon after the ) but before the statement. The statement is either a normal statement (which can be empty), ending in a semicolon:- if(expr) ...

"In" "Out" and "Trash"
I just bought a new computer and I re-installed Eudora Light on my new computer. But when I open Eudora, the "In", "Out" and "Trash" links are not on the left side of the screen the way they were on my old computer. How can I get these links back on the left side of the screen? Thank you. On 25 Mar 2007 09:49:22 -0700, "abx" <abfunex@yahoo.com> wrote: >I just bought a new computer and I re-installed Eudora Light on my new >computer. But when I open Eudora, the "In", "Out" and "Trash" links >are ...

A problem about "[ ]" "( )" "="
I want to read several images saved in a director,and give them to I1,I2 ,I3....,using the following codes: filelist=dir(['c:\MATLAB701\work\...\*.jpg']); for i=1 :length(filelist) I=imread(fullfile('c:\MATLAB701\work\...',filelist(i).name)); end; but failed. Then I used I(i)=imread... ,still failed. How could I do? "John" <mailofww@126.com> wrote in message news:ef19e12.-1@webx.raydaftYaTP... >I want to read several images saved in a director,and give them to > I1,I2 ,I3....,using the following codes: > filelist=dir(['c:\MATLAB701\work\.....

Another variant of "ssh" working interactively, but "ssh cmd" and "scp" failing
hello, world\n I've read the SSH and OpenSSH FAQ (motd/.profile issue), googled left and right and still could not find a solution to the problem. I've got an embedded box named FOO running OpenSSH_3.7.1p1 on Linux 2.4 on PowerPC, the shell is a busybox, but using bash does not change anything. No PAM. This is the situation: ssh root@FOO -- works ssh root@FOO ls -- fails, no output, no matter what command is given scp file root@FOO: -- fails, "lost connection" Here's the debug output for the client and the server. I have also appended the /etc/ssh/sshd_config....

differences among "ssh", "rlogin" and "telnet"
Hi, what are the differences among "ssh", "rlogin" and "telnet"? Which one is better and when are each of these are recommended to use? Thanks. On Thu, 2 Mar 2006, SolarisUser wrote: > what are the differences among "ssh", "rlogin" and "telnet"? Which one > is better and when are each of these are recommended to use? ssh encrypts traffic, the others don't. SSh should always be used, and there's no reason to use the others these days. -- Rich Teer, SCNA, SCSA, OpenSolaris CAB member President, Rite Online Inc. ...

No "standby" or "hibernate" options
Hi, I have a Dell laptop (CPx) running Windows 2000. For some reason I don't have "standy" (or "hibernate," which I know you need to enable explicitly) in my "shutdown" options (I just have log off, restart and shutdown). I'm not sure what I need to do to get the options to show up. The hardware supports it (hardware manager shows ACPI PC). And if I hit "function escape" on the laptop, it goes into standby (and I get the Windows "preparing to standby..." message). I just can't figure out how to get the options to show up so I can...

What is option "Calcalgorithm" "CheckDesktopGeometry" ?
What is option "Calcalgorithm" "CheckDesktopGeometry" ? I can't seem to find anything, I've been googling for a long time :(. I'm trying to get 1920x1200 resoultion working under Suse 9.0 on a Dell D800 laptop. Many thanks for any help in advance. Jim On 14 Feb 2004 22:35:19 -0800, Jim Kroger <kroger@princeton.edu> wrote: > > > What is option "Calcalgorithm" "CheckDesktopGeometry" ? I can't seem > to find anything, I've been googling for a long time :(. > > I'm trying to get 1920x1200 resoultion working under Suse 9.0 on a > Dell D800 laptop. > > Many thanks for any help in advance. > > Jim If you don't have any luck here, try comp.os.linux.x AC -- ed(1) Check out the original tutorials by Brian W. Kernighan at The Ed Home Page ----> http://tinyurl.com/2aa6g ...

"for" loop inside "ssh"
Hello, I try to use "ssh" command and run "for" loop in remote server. I mean something like: ssh remote_server -l remote_user "for file in `ls *.sql`; do; echo $file; done" Now I get: file: Undefined variable. OS: Sun Solaris Shell: ksh Thank you. On 2014-03-10, shulamitmi3@gmail.com <shulamitmi3@gmail.com> wrote: > Hello, > > I try to use "ssh" command and run "for" loop in remote server. > > I mean something like: > > ssh remote_server -l remote_user "for file in `ls *.sql`; do...

What is option "Calcalgorithm" "CheckDesktopGeometry" ?
What is option "Calcalgorithm" "CheckDesktopGeometry" ? I can't seem to find anything, I've been googling for a long time :(. I'm trying to get 1920x1200 resoultion working under Suse 9.0 on a Dell D800 laptop. Many thanks for any help in advance. Jim (thanks to the person who suggested I come here for help....) ...

Urgent JAVA Requirement in """"""NEW YORK"""""""""
Hello Partners, How are you ? Please find the requirement below. Location : NY Duration : 8 mnths Rate :Open Job description: Java/J2EE Web Service Developer =B7 (4+ years of application development experience in Java/J2EE and Web service technologies. =B7 Experience with spring & Hibernate. =B7 Experience with J2EE Application Server (preferably Web logic). =B7 Preferable Aqua logic DSP Experience =B7 Preferable Sonic ESB Composite Service experience Experience w...

Gary Sokolich """"""
"""""""""" http://www.manta.com/c/mmlq5dm/w-gary-sokolich W Gary Sokolich 801 Kings Road Newport Beach, CA 92663-5715 (949) 650-5379 http://www.tbpe.state.tx.us/da/da022808.htm TEXAS BOARD OF PROFESSIONAL ENGINEERS February 28, 2008 Board Meeting Disciplinary Actions W. Gary Sokolich , Newport Beach, California �V File B-29812 - It was alleged that Dr. Sokolich unlawfully offered or attempted to practice engineering in Texas (...) Dr. Sokolich chose to end the proceedings by signing a Consent Order that was accepted by ...

Question about "sprintf" "@" "do for"
Hello, this works: A1=3D1 A2=3D2 A3=3D3 i=3D1 vari=3Dsprintf("A%.f",i) print vari,"=3D",@vari i=3Di+1 vari=3Dsprintf("A%.f",i) print vari,"=3D",@vari i=3Di+1 vari=3Dsprintf("A%.f",i) print vari,"=3D",@vari do for [i=3D1:3]{ vari=3Dsprintf("A%.f",i) print vari } But I want to have "print vari,"=3D",@vari" in the loop. But it dosen't=20 work. Why can't I use "print vari,"=3D",@vari" in the loop? Is there a=20 solution for? J=C3=B6rg Jörg ...

Web resources about - Unsupported option "GSSAPIAuthentication" - comp.security.ssh

Resources last updated: 3/7/2016 7:04:56 PM