f



[ace-users] Re: [tao-users] Re: difficulties compling TAO with mingw and msys

Hi,

> Sorry about the wrong PRF file.
> 
> I have been using the -mtune as you can check for further down the
> excessively-long compile log; it gets rid of one of the complaints the
> compiler has.

Ok, I changed that last week, with 3.4 we use -mtune now.

>I followed your suggestion regarding the include file and it gets past
> the problem.
> 
> However, it seems like such a fundamental include, why does it work on
> other envionments (like the linux one that was a full successful
> compile for me)?

I really don't know, maybe a compiler bug.

> Also, do you know how to resolve the collision between 'inline' and
> 'dllimport'?

That is a nasty one. I think the compiler is right, mixing inline and
dllimport is nasty and doesn't give you real replacable dll's. The only
thing to do, is to change ACE/TAO, when building dynamic, we should disable
inline code and change all code that not respects this. This an item which
can take some time, for this I have bugzilla entry
http://deuce.doc.wustl.edu/bugzilla/show_bug.cgi?id=1581

> Thanks much for your support.

Be aware that this is just best effort, if you want guaranteed support for
MinGW, see www.theaceorb.nl

Regards,

Johnny Willemsen
Remedy IT
Leeghwaterstraat 25
2811 DT Reeuwijk
The Netherlands
www.theaceorb.nl / www.remedy.nl 

0
Johnny
9/7/2004 6:52:00 AM
comp.soft-sys.ace 20326 articles. 1 followers. marlow.andrew (167) is leader. Post Follow

1 Replies
609 Views

Similar Articles

[PageSpeed] 18

Thanks!

I followed your advice in your earlier mail and dropped back to the
3.2.3 version of the compiler, and things work much better.  I had
tried an intermediate version, I think it was 3.3, and all compiles
ended in a disaster, with the assembler choking on each file; thus I
moved to the next version.  Not realizing that there would be many
issues.

I will use 3.2 for now, and monitor how things progress in ACE getting
adapted to newer releases.

William Lederer
wgl at ciexinc.com
0
William
9/7/2004 3:26:42 PM
Reply:

Similar Artilces:

Re: [ace-users] Re: [tao-users] Re: difficulties compling TAO with mingw and msys
Hi, Great, when we get time we will try to upgrade to a newer version of MinGW, but it is still a candidate. Just keep an eye on the scoreboard, when we upgrade you will see it there. As you can see on the scoreboard, there are no issues with the 3.2.3 version Regards, Johnny Willemsen Remedy IT Leeghwaterstraat 25 2811 DT Reeuwijk The Netherlands www.theaceorb.nl / www.remedy.nl "William Lederer" <wgl@localhost.localdomain> wrote in message news:<m3pt4yrtfx.fsf@localhost.localdomain>... > Thanks! > > I followed your advice in your earlier mail and dropped back to the > 3.2.3 version of the compiler, and things work much better. I had > tried an intermediate version, I think it was 3.3, and all compiles > ended in a disaster, with the assembler choking on each file; thus I > moved to the next version. Not realizing that there would be many > issues. > > I will use 3.2 for now, and monitor how things progress in ACE getting > adapted to newer releases. > > William Lederer > wgl at ciexinc.com "Johnny Willemsen" <jwillemsen@remedy.nl> writes: > Hi, > > Great, when we get time we will try to upgrade to a newer version of MinGW, > but it is still a candidate. Just keep an eye on the scoreboard, when we > upgrade you will see it there. As you can see on the scoreboard, there are > no issues with the 3.2.3 version I have run all ...

Re: [ace-users] Re: [tao-users] Re: difficulties compling TAO with mingw and msys #2
Hi, > > Great, when we get time we will try to upgrade to a newer version of MinGW, > > but it is still a candidate. Just keep an eye on the scoreboard, when we > > upgrade you will see it there. As you can see on the scoreboard, there are > > no issues with the 3.2.3 version > > I have run all but a few of the provided tests, and all looks well. We run all ACE tests, no issues there, we are working on the TAO tests, some of the tests are able to freeze our build system > Out of curiosity, what is required for eliminating the > inline/dllimport issue? Changing all code that uses normal inline, to use ACE_INLINE, remove incorrect export macros, just fix warning by warning. If you can supply patches we are willing to commit them. Furthermore, change the platform_gnuwin32.GNU file that when building dynamic, we disable inline Johnny ...

RE: [tao-users] Re: [ace-users] Re: Announcing the release of the new beta (ACE-5.4.10, TAO-1.4.10 and CIAO-0.4.10)
Hi, > > >> We encourage you to download the new beta, use it with your > > >> applications, and let us know soon if you encounter any problems > > >> since we plan to cut the x.5 release by February 28th. > > > > As per Wallace's comments, we have an aggressive schedule > for the x.5 > > release to meet the needs of some major sponsors. If > people can give > > x.4.10 a "test drive" in the next couple of days and report problems > > they encounter we'll try to ensure that we fix any > showstoppers before > > According to bugzilla bug 2323 is not fixed yet. > > http://deuce.doc.wustl.edu/bugzilla/show_bug.cgi?id=2323 > > For us it is a show stopper. We use the OCI version which does not > have problems related to this bug but it would be nice to be able to > use the latest version with more fixes. FYI, the reason that this test now fails is because Ossama added several new test cases which wheren't in the test in the past, this uncovered some bugs which according to our information where already there a long time. Johnny "Johnny Willemsen" <jwillemsen@remedy.nl> writes: > > > >> We encourage you to download the new beta, use it with your > > > >> applications, and let us know soon if you encounter any problems > > > >> sinc...

RE: [tao-users] RE: [ace-users] XML service configuration no longer works with ACE/TAO 5.4.5/1.4.5
Hi, > > Hi Lothar > > > > > � � ACE VERSION: 5.4.5 > > > > Thanks for using the PRF form. Could you try to find the > problem and send > > us patches to fix this? > > > > Regards, > > > > Johnny Willemsen > > I have no problem committing some time to the problem. I do > however know as > much as nothing about the ACE XML parser and it's recent > changes. It seems to > me that (some) of the recent changes might have caused the > test failures. So > if someone working actively on ACEXML gives me directions I > am willing to > spend my time investigating the problem. I can't remember that work has been done the last months so I am also amazed things broke. Nobody is actively working on it, so I think there are not much directions at this moment. Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl On Wednesday 18 May 2005 11:01, Johnny Willemsen wrote: > Hi, > I can't remember that work has been done the last months so I am also > amazed things broke. Nobody is actively working on it, so I think there are > not much directions at this moment. Well, it did definiteley work with 5.4.4. So any changes that broke it must have been made between 5.4.4 and 5.4.5. I also read in the release email of 5.4.5 in the CIAO...

[tao-users] RE: [ace-users] ACE/TAO on Solaris 10
Hi, There have been some replies. People do have things working on Solaris and there have been made fixes in ACE/TAO. Could you wait another week or so and try the x.4.8 or try cvs, see http://cvs.doc.wustl.edu Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl > Dear list members, > > (I sent this message couple of days ago and am unsure if it > was distributed, > thus re-sending it again. I apologize if you received it more > than once) > > I would like to give feedback regarding availability of > ACE/TAO (versions > 5.4.7 and 1.4.7 respectively) on OpenSolaris (Solaris 10) > Intel platform. > > Sun is selectively releasing source code of the Solaris 10 under an > open-source license. Details of this project and installable Solaris > binaries can be found on here: > http://www.opensolaris.org > > Sun has also released Forte compiler set in binary form to > the OpenSolaris > community. A Quote from their website: "Sun Studio 10 > software is freely > available to participants in the OpenSolaris community for > development on > both OpenSolaris and Solaris[tm] Operating Systems on > SPARC-based systems > and x86-based systems, as well as on Linux." You can get > access to Forte > compilers from the OpenSolaris website as well but you should register...

[tao-users] Re: [ace-users] How to use c++ native exception handling instead of ACE's while building ACE+TAO
Hi, >> My only guess is that all of the libs you are linking in your >> builds were not compiled with a consistent set of options. Right, my recommendation would be to completely blow away your existing ACE+TAO x.5 directory, download a fresh version, and start from a clean slate. It sounds like you may have things lying around from previous build attempts. Thanks, Doug -- Dr. Douglas C. Schmidt Professor and Associate Chair Electrical Engineering and Computer Science TEL: (615) 343-8197 Institute for Software Integrated Systems WEB: www.dre.vanderbilt.edu/~schmidt Vanderbilt University, Nashville TN, 37203 NET: d.schmidt@vanderbilt.edu ...

Re: [ace-users] [tao-users] ACE/TAO ported to Sun Studio 12
Hi, > is this change included in the official release of ACT/TAO (and if yes > since which version)? This change will be part of the upcoming x.6.2 version. I am creating x.6.2 at this moment, when everything runs fine it will be available at the end of today. Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl *** Integrated compile and test statistics see http://scoreboard.theaceorb.nl *** *** Commercial service and support for ACE/TAO/CIAO *** *** See http://www.theaceorb.nl/en/support.html *** ...

[ace-users] RE: [tao-users] Borland Developer Studio 2006 with ACE/TAO
Hi, I'm curious about the current status of ACE/TAO and C++ Builder 2006. Borland shipped the promised fix/update some time ago, but I couldn't find anything about how it works with ACE/TAO. Regards Espen Harlinn ...

[tao-users] RE: [ace-users] Tao_idl core dumps during ACE/TAO build
Hi, Please upgrade to ACE+TAO x.4.7, which you can download from http://deuce.doc.wustl.edu/Download.html under the heading "latest beta kit". The DOC groups at Washington University, UC Irvine, and Vanderbilt University only provide "best effort" support for non-sponsors for the latest beta kit, as described in http://www.cs.wustl.edu/~schmidt/ACE_wrappers/docs/ACE-bug-process.html Thus, if you need more "predictable" help, I recommend that you check out http://www.cs.wustl.edu/~schmidt/commercial-support.html for a list of companies that will provide you with ACE+TAO commercial support. Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl > TAO VERSION: 1.4.1 > ACE VERSION: 5.4.1 > > HOST MACHINE and OPERATING SYSTEM: > Dell PowerEdge750, Slackware Linux 10.1.0 > > TARGET MACHINE and OPERATING SYSTEM, if different from HOST: > COMPILER NAME AND VERSION (AND PATCHLEVEL): > gcc version 3.3.4 > > AREA/CLASS/EXAMPLE AFFECTED: > CosConcurrencyControl.idl failed due to tao_idl core dump > > DOES THE PROBLEM AFFECT: > COMPILATION? Yes > $ACE_ROOT/ace/config.h and > $ACE_ROOT/include/makeinclude/platform_macros.GNU > included below > LINKING? No > EXECUTION? No > OTHER (please specify)? No > > SYNOPSIS: > TAO fails to build because tao_...

[tao-users] Re: [ace-users] timestamps incorrect in ACE+TAO .tar.gz
Hi > It has just come to my attention that there are many files in the > ACE+TAO .tar.gz file with timestamps showing '1970-01-05'. Obviously > this is wrong and is the only reason why my packages have been > rejected from Debian ("file(s) with a time stamp too ancient"). > > Is there a possibility that this will be fixed. Or should I just > 'touch' all the problematic files? Could you please run a touch on them? I don't know how this happened. Strange. Opening and fiddling with the distribution would make quite a few things goofy! If ...

[tao-users] Re: difficulties compling TAO with mingw and msys
Hi William, "William Lederer" <wgl@localhost.localdomain> wrote in message news:<m3r7pg89wf.fsf@localhost.localdomain>... > Using late versions of mingw and msys, compiling of TAO fails at > TAO/orbsvcs/orbsvcs/ESF/ESF_Copy_On_Write.h:172 with the error > error: invalid use of undefined type `struct CORBA::Environment' > ACE VERSION: 5.4.2 Thanks for using the PRF form. Please use the next time the TAO form when asking questions > HOST MACHINE and OPERATING SYSTEM: > Windows 2000 professional > Intel 686 > mingw and msys > If on Windows based OS's, which version of WINSOCK do you > use?: Unknown > Compiler: > g++.exe (GCC) 3.4.1 (mingw special) > Copyright (C) 2004 Free Software Foundation, Inc. > This is free software; see the source for copying conditions. There is NO > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. We didn't use this compiler yet, we use the 3.2.3 version as listed on http://www.dre.vanderbilt.edu/scoreboard/integrated.html. > TARGET MACHINE and OPERATING SYSTEM, if different from HOST: > COMPILER NAME AND VERSION (AND PATCHLEVEL): > same > CONTENTS OF $ACE_ROOT/ace/config.h [if you use a link to a platform- > specific file, simply state which one]: > // following define if target is win 95 > // #define ACE_HAS_WINN...

[ace-users] RE: [tao-users] Borland Developer Studio 2006 with ACE/TAO #2
Hi, The x.4.8 version of ACE/TAO is supported with BCB2006, we have some linker warnings/errors in some configurations, Borland is working on these for Update2, but these are not causing a problem. See ACE_wrappers/ACE-INSTALL.html for info about how to use it. We deliver also commercial support for using BCB2006 with ACE/TAO. See www.theaceorb.nl for our services. Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl > -----Original Message----- > From: Espen Harlinn [mailto:espen@harlinn.no] > Sent: donderdag 2 februari 2006 18:06 > To: jwillemsen@remedy.nl > Cc: ace-users@cs.wustl.edu > Subject: RE: [tao-users] Borland Developer Studio 2006 with ACE/TAO > > Hi, > > I'm curious about the current status of ACE/TAO and C++ Builder 2006. > Borland shipped the promised fix/update some time ago, but I > couldn't find > anything about how it works with ACE/TAO. > > Regards > Espen Harlinn > > ...

[ace-users] RE: [tao-users] Borland Developer Studio 2006 with ACE/TAO #2
Hi, See http://www.remedy.nl/en/borland.html for an overview of the supported Borland products with TAO. Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl > -----Original Message----- > From: Espen Harlinn [mailto:espen@harlinn.no] > Sent: donderdag 2 februari 2006 18:06 > To: jwillemsen@remedy.nl > Cc: ace-users@cs.wustl.edu > Subject: RE: [tao-users] Borland Developer Studio 2006 with ACE/TAO > > Hi, > > I'm curious about the current status of ACE/TAO and C++ Builder 2006. > Borland shipped the promised fix/update some time ago, but I > couldn't find > anything about how it works with ACE/TAO. > > Regards > Espen Harlinn > > ...

[tao-users] RE: [ace-users] Re: How to use Any>>=OctetSeq in TAO 1.3.6?
Hi, I just had a quick look. It looks to me the that TAO_Export macro is missing from OctetSeqA.h for the operators. Also the include of pre/post files is missing. Heiko, could you try to add TAO_Export to front of the operators in OctetSeqA.h and then rebuild TAO and you app. I think the linker errors should be gone. Bala, shouldn't we add pre/post includes and TAO_Export to the archive files? Regards, Johnny Willemsen Remedy IT Leeghwaterstraat 25 2811 DT Reeuwijk The Netherlands www.theaceorb.nl / www.remedy.nl > -----Original Message----- > From: owner-ace-users@cse.wustl....

[tao-users] RE: [ace-users] Re: How to use Any>>=OctetSeq in TAO 1.3.6? #2
Hi, > > Heiko, could you try to add TAO_Export to front of the operators in > > OctetSeqA.h and then rebuild TAO and you app. I think the linker > > errors should be gone. > > this is the solution! Thank you :-) Thanks for the feedback. I have just committed the fix into the repo and this will be in the 1.4 release. Regards, Johnny Willemsen Remedy IT Leeghwaterstraat 25 2811 DT Reeuwijk The Netherlands www.theaceorb.nl / www.remedy.nl ...

RE: [ace-users] Re: ACE-TAO subesetting
Thanks Don, Yes I do intend to follow up on the material you have alluded to in the mail. And I stumbled upon your contact during some initial reading on this subject. <snip><http://www.cs.wustl.edu/~schmidt/ACE_wrappers/docs/ACE-subsets.html> Anyone interested in contributing time or funding to these efforts should please contact d.hinton@vanderbilt.edu <snip> /Gaurav -----Original Message----- From: Don Hinton [mailto:don.hinton@vanderbilt.edu] Sent: Friday, November 19, 2004 10:42 AM To: Gaurav Khanna Cc: ace-users@cs.wustl.edu Subject: [ace-users] Re: ACE-TAO subesetting Hi Gaurav: > How do i plug into the latest state of efforts on ACE/TAO subsetting?. > I am trying to investigate opportunities of footprint/memory usage > reduction in typical use. Thanks very much for your email. Please make sure to send all questions related to ACE or TAO to the ACE mailing list or ACE+TAO newsgroup, rather than to me directly. See http://www.cs.wustl.edu/~schmidt/ACE-mail.html for more info on how to access these resources. For the latest information on ACE+TAO subsetting, please see http://www.cs.wustl.edu/~schmidt/ACE_wrappers/docs/ACE-subsets.html If you'd like to contribute to - or sponsor - efforts on ACE+TAO subsetting please send email to Doug Schmidt <d.schmidt@vanderbilt.edu>. Thanks very much, Don ...

[ace-users] Re: [tao-users] TAO Tutorial
Hi Matt, Thanks for your email. Please send all correspondence to the TAO users list rather than me, however. > TAO Version 1.3a BTW, since you're using OCI's version of TAO please send your questions to taosupport@ociweb.com. > Sun Solaris 8 > GCC 3.4.2 > (I will be sure to include the PRF next time) Great! > As you see, I have TAO v1.3a. Would that be the reason for the *.i > files opposed to *.inl files? Yes, indeed. Take care, Doug ...

[tao-users] Re: [ace-users] Re: Query
Hi Bill, Thanks very much for your email. Please make sure to send all questions related to TAO or ACE to the ACE mailing list or ACE+TAO newsgroup, rather than to me directly. > Actually this email is very appropriate. We at The Weather Channel > are attempting to build ACE+TAO version 5.4 on an AMD opteron using > g++ 3.3.3. > > The only errors we have seen thus far and in a component that we don't really > intend on using is: This problem was fixed before the x.4.1 release, so if you download it from http://deuce.doc.wustl.edu/Download.html you'll get a wo...

RE: [ace-users] Re: [tao-users] FYI: tao doesn't seem to build with gcc-4.0
Hi, We build with gcc4.0.2 with suse 10 without any problems. Johnny > -----Original Message----- > From: owner-ace-users@cse.wustl.edu > [mailto:owner-ace-users@cse.wustl.edu] On Behalf Of Steven Hartmann > Sent: dinsdag 15 november 2005 18:13 > To: ace-users@cs.wustl.edu > Subject: [ace-users] Re: [tao-users] FYI: tao doesn't seem to > build with gcc-4.0 > > I was wondering if anyone has found a workaround for the > problem below. I ran > into it also using gcc 4.0.2 which ships with SuSe 10. > > I did find that the gcc folks did fix this as bug # 24202 > ( http://gcc.gnu.org/bugzilla/show_bug.cgi?id=24202 ), but > the fix seems to > be scheduled for release of 4.0.3. I was just wanting to > know if someone > found a workaround yet for 4.0.2? > > -- > Best regards, > > Steve Hartmann > > > On Thu, 2005-09-22 at 13:34 -0400, Jim wrote: > > > FYI: tao doesn't seem to build with gcc-4.0 > > > Recent versions (1.4.5 and newer) do build with g++ 4.0. > Which version > > are you using, and on what platform? Using the > > ACE_wrappers/TAO/PROBLEM-REPORT-FORM to report such issues > would be very > > helpful. > > An unrelated but maybe helpful observation is that TAO/ACE 1.4.7 does > not compile with the gcc in Debian unstable (which was > updated to gcc > ...

[tao-users] RE: [ace-users] XML service configuration no longer works with ACE/TAO 5.4.5/1.4.5
Hi Lothar > � � ACE VERSION: 5.4.5 Thanks for using the PRF form. Could you try to find the problem and send us patches to fix this? Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl > > � � HOST MACHINE and OPERATING SYSTEM: > uname -a > Linux janus 2.6.11.4-20a-default #1 Wed Mar 23 21:52:37 UTC > 2005 x86_64 x86_64 > x86_64 GNU/Linux > > � � TARGET MACHINE and OPERATING SYSTEM, if different from HOST: > � � COMPILER NAME AND VERSION (AND PATCHLEVEL): > gcc-4.0.0 --version > gcc-4.0.0 (GCC) 4.0.0 > > � � CONTENTS OF $ACE_ROOT/ace/config.h [if you use a link to > a platform- > � � specific file, simply state which one]: > cat /opt2/linux/x86_64/ACE/1.4.4/ACE_wrappers/ace/config.h > #define ACE_HAS_XML_SVC_CONF > #include "ace/config-linux.h" > > � � CONTENTS OF > $ACE_ROOT/include/makeinclude/platform_macros.GNU (unless > � � this isn't used in this case, e.g., with Microsoft Visual C++): > cat > /opt2/linux/x86_64/ACE/1.4.4/ACE_wrappers/include/makeinclude/ > platform_macros.GNU > > # configure ACE/TAO for our use > > debug=1 > optimize=1 > exceptions=1 > threads=1 > inline=1 > rtti=1 > versioned_so=1 > interface_repo=1 > ssl=1 > > include $(ACE_ROOT)/include/makeinclude/platform_linux.GNU ...

Re: [tao-users] Re: [ace-users] Example showing how to use TAO to return a reference to a C++ class object via an ORB service
Hi Alex, >> Corba can marschall only those types that are known to it. (either build >> in basic types or defined by IDL). There is standard way to >> serialize a >> C++ class. I think you mean "there is no standard way to serialize a C++ class" right?! Take care, Doug ...

[tao-users] Re: [ace-users] Re: minimum CORBA
Hi, > I have upgraded to ACE.5.4.4 and TAO.1.1.4 and I still have the same > issue. When compiling my IDLs, TAO IDL is generating code that fails to > link because ACE/TAO was compiled with minimum_corba=1. > > Is there a flag/option that needs to be given to TAO IDL when compiling > my IDLs or is there something more to it. Do you use the GNU makefile infrastructure of ACE/TAO for your own project? Try to build one of the TAO tests and compare the compiler switches to your own flags. You should have several compiler flags in your own project. Regards, We recommend you to upgrade to the x.4.4 version which you can obtain from http://deuce.doc.wustl.edu/Download.html ...

[tao-users] Re: [ace-users] The ACE ORB and Solaris
Hi, To ensure that we have proper version/platform/compiler information, please make sure you fill out the appropriate problem report form (PRF), which is in $ACE_ROOT/PROBLEM-REPORT-FORM $TAO_ROOT/PROBLEM-REPORT-FORM or in $ACE_ROOT/BUG-REPORT-FORM $TAO_ROOT/BUG-REPORT-FORM in older versions of ACE+TAO. Make sure to include this information when asking any questions about ACE+TAO since otherwise we have to "guess" what version/platform/compiler/options you've using, which is error-prone and slows down our responsiveness. >> does the ACE ORB run on Solaris 10 (SPARC)? Yes, please see http://www.dre.vanderbilt.edu/scoreboard/integrated.html for the OS platforms and compilers that we test ACE+TAO with regularly, which includes Solaris 10. >> I could only find information that it runs on e.g. Solaris 1.x and >> 2.x on SPARC and Intel >> (http://www.cs.wustl.edu/~schmidt/TAO-status.html). I've fixed this so it doesn't appear to limit Solaris support to 1.x or 2.x. >> Also, does ACE ORB interoperate with Orbacus without problems? Yes, as far as we know. If you run into problems please use the PRF to report them. Thanks, Doug -- Dr. Douglas C. Schmidt Professor and Associate Chair Electrical Engineering and Computer Science TEL: (615) 343-8197 Institute for Software Integrated Systems WEB: www.dre.vanderbilt.edu/~schmidt Vanderbilt U...

[ace-users] Re: [tao-users] ACE::set_handle_limit broken
Hi Eider, Thanks for the PRF! "Eider Oliveira" <eider.oliveira@gmail.com> wrote in message news:<2e53f4ef0409021132f3de615@mail.gmail.com>... > ACE VERSION: 5.4.1 > > HOST MACHINE and OPERATING SYSTEM: Linux > > > When at Select_Reactor.cpp:550 > ACE_TRACE ("ACE_Select_Reactor_T::ACE_Select_Reactor_T"); > > // First try to open the Reactor with the hard-coded default. > if (this->open (ACE_Select_Reactor_T<ACE_SELECT_REACTOR_TOKEN>::DEFAULT_SIZE, > 0, > sh, > tq, > disable_notify_pipe, > notify) == -1) > > open is called, the value > ACE_Select_Reactor_T<ACE_SELECT_REACTOR_TOKEN>::DEFAULT_SIZE (1024) > is lowering the rlimits for the entire app. > > I don't find a way to change this DEFAULT_SIZE Please see sidebar 20 on page 92 in C++NPv2. See http://www.riverace.com/acebooks/ for more information on the books. Best regards, -Steve Hi Steve, This isn't the case. I don't want to use the Select Reactor with more then FD_SIZE I/O handles. It's not a problem Select_Reactor limit the number of event handlers. It 's a problem it reduce the app limit (setrlimit) to open files. I just want to open more files in the app, and I won't use thes fd in any select. The p...

Web resources about - [ace-users] Re: [tao-users] Re: difficulties compling TAO with mingw and msys - comp.soft-sys.ace

Difficulties in Diagnosing Lewy Body Dementia - pt 1 - YouTube
Pt 1. - From the January 2007 "Many Faces of Lewy Body Dementia" series at Coral Springs Medical Center, FL. A presentation by Dr. Jonathan T. ...

Ex-Western Bulldog Ryan Griffen reveals difficulties settling at GWS Giants
Ryan Griffen sounded like he was ready to explode off the mark when he arrived at the Giants last season. But something wasn't quite right.

Craigie Leisure Centre closed after swimmers experience breathing difficulties
The Craigie Leisure Centre has been evacuated after a number of swimmers became ill.

Pyke's twist will cause difficulties but Swans' chances won't dive
Pyke's twist will cause difficulties but Swans' chances won't dive

Search for MH370: Bluefin 21 sub encounters more difficulties as underwater hunt continues
As a robotic submarine dove into the ocean to look for lost Flight MH370, angry Chinese relatives stormed out of a teleconference meeting on ...

Qld minister admits casino 'difficulties'
Queensland's deputy premier admits a Gold Coast casino plan poses major environmental difficulties, and defends proposals for three new gaming ...

Craigie Leisure Centre closed after swimmers experience breathing difficulties
The Craigie Leisure Centre has been evacuated after a number of swimmers became ill.

Clive Palmer: Treasurer Curtis Pitt says Queensland Nickel able to trade out of difficulties
Queensland's Treasurer says he would consider offering short-term help to Queensland Nickel, but the company should be able to save itself.

CBC News has technical difficulties with online comments
Celebrities blast NRA's Newtown response on Twitter Dec 21, 2012 5:46 PM ET — Celebrities, politicians and journalists were shocked when the ...

How will HK go through economic difficulties in 2012
How will HK go through economic difficulties in 2012 People's Daily Online By Wang Ping ( People's Daily Overseas Edition) The export-oriented ...

Resources last updated: 3/5/2016 6:29:07 PM