f



[tao-users] RE: [ace-users] Error in $TAO_ROOT/tao on Cygwin #2

Hi,

Thanks for the info, but I doubt this is a good change. At the moment I have
sponsoring for improving the Cywin support we will setup a static build and
monitor the status daily.

Johnny 

> -----Original Message-----
> From: Daniella Malin [mailto:daniella@lmtgtm.org] 
> Sent: donderdag 7 oktober 2004 17:13
> To: Johnny Willemsen
> Cc: 'Daniella Malin'; 'Russ Leach'; 'Tao-Users'
> Subject: Re: [ace-users] Error in $TAO_ROOT/tao on Cygwin
> 
> Comments below
> 
> Johnny Willemsen wrote:
> 
> >Hi,
> >
> >  
> >
> >>You suggested that I check if the 
> >>ACE_Wchar_Codeset_Translator is linked 
> >>into the ACE lib.
> >>What I find is that the file in which WChar_Codeset_Translator is 
> >>defined, CDR_Stream.h, is
> >>in the ACE lib and other classes defined in that file, such as 
> >>ACE_OutputCDR are linked into
> >>the ACE lib but WChar_Codeset_Translator is not.
> >>In fact,
> >> > nm libACE.a | grep Translator
> >>yields nothing.
> >>
> >>Since this step wasn't a problem in version x.4.1 I compared 
> >>CDR_Stream.h in the two
> >>versions but nothing jumps out as the possible cause.
> >>
> >>You also suggested that I check that when you build x.4.2 I 
> don't link
> >>by accident an x.4.1. That's not possible as the x.4.1 
> directory was 
> >>deleted entirely
> >>at the time of the build.
> >>
> >>BTW, in order to get "make static_libs=1" to work in 
> >>$ACE_ROOT/ace I had
> >>to explicitly define VPATH, VDIR and VSHDIR in platform_cygwin32.GNU
> >>    
> >>
> >
> >Could you explain what you did, then we could add this to 
> the documentation,
> >we don't have a static cygwin build at this moment
> >  
> >
> I added the following three lines to platform_cygwin32.GNU
> near the top. I'm not sure its the best way but the file is attached.
> 
> VPATH += c:/cygwin/usr/local/ACE_wrappers/ace
> VDIR = obj/
> VSHDIR = $(VDIR)
> 
> Let me know if there's any other information I can provide 
> that would be 
> helpful.
> -Daniella
> 
























































0
Johnny
10/8/2004 6:24:25 AM
comp.soft-sys.ace 20326 articles. 1 followers. marlow.andrew (167) is leader. Post Follow

0 Replies
746 Views

Similar Articles

[PageSpeed] 57

Reply:

Similar Artilces:

[tao-users] RE: [ace-users] Error in $TAO_ROOT/tao on Cygwin
Hi > ACE VERSION: 5.4.2 TAO 1.4.2 Thanks for using the PRF form, btw, send TAO problems to tao-users@cs.wustl.edu. > Dell Optiplex gx270 Intel(R) Pentium(R) and Windows XP > Service Pack 2 > > COMPILER NAME AND VERSION (AND PATCHLEVEL): > cygwin 1.5.11-1, g++ 3.3.3 > > AREA/CLASS/EXAMPLE AFFECTED: > $TAO_ROOT/tao > > DOES THE PROBLEM AFFECT: > COMPILATION? no > $ACE_ROOT/include/makeinclude/platform_macros.GNU contain? > include $(ACE_ROOT)/include/makeinclude/platform_cygwin32.GNU > TAO_ORBSVCS = Naming Time SSLIOP > shared_libs_only = 1 > shared_libs = 1 > ssl = 1 > debug = 0 > > LINKING? YES > On Unix systems, did you run make realclean first? Started > with a clean download > EXECUTION? NO > OTHER (please specify)? > [Please indicate whether ACE, your application, or both are affected.] > > SYNOPSIS: > Compile errors under cygwin > DESCRIPTION: > Upon Johnny Willemsen's gratefully recieved suggestion I > tried 5.4.2 > over > 5.4.1. This time, my error came sooner. Out of the box I get an error > executing make in $TAO_ROOT/tao > Here's the error: > Creating library file: libTAO.dll.a > .shobj/UTF16_BOM_Translator.o(.text+0x2e):UTF16_BOM_Translator.cpp: > undefined reference to `...

[ace-users] RE: [tao-users] Borland Developer Studio 2006 with ACE/TAO #2
Hi, The x.4.8 version of ACE/TAO is supported with BCB2006, we have some linker warnings/errors in some configurations, Borland is working on these for Update2, but these are not causing a problem. See ACE_wrappers/ACE-INSTALL.html for info about how to use it. We deliver also commercial support for using BCB2006 with ACE/TAO. See www.theaceorb.nl for our services. Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl > -----Original Message----- > From: Espen Harlinn [mailto:espen@harlinn.no] > Sent: donderdag 2 februari 2006 18:06 > To: jwillemsen@remedy.nl > Cc: ace-users@cs.wustl.edu > Subject: RE: [tao-users] Borland Developer Studio 2006 with ACE/TAO > > Hi, > > I'm curious about the current status of ACE/TAO and C++ Builder 2006. > Borland shipped the promised fix/update some time ago, but I > couldn't find > anything about how it works with ACE/TAO. > > Regards > Espen Harlinn > > ...

[ace-users] RE: [tao-users] Borland Developer Studio 2006 with ACE/TAO #2
Hi, See http://www.remedy.nl/en/borland.html for an overview of the supported Borland products with TAO. Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl > -----Original Message----- > From: Espen Harlinn [mailto:espen@harlinn.no] > Sent: donderdag 2 februari 2006 18:06 > To: jwillemsen@remedy.nl > Cc: ace-users@cs.wustl.edu > Subject: RE: [tao-users] Borland Developer Studio 2006 with ACE/TAO > > Hi, > > I'm curious about the current status of ACE/TAO and C++ Builder 2006. > Borland shipped the promised fix/update some time ago, but I > couldn't find > anything about how it works with ACE/TAO. > > Regards > Espen Harlinn > > ...

Re: [ace-users] Re: [tao-users] Re: difficulties compling TAO with mingw and msys #2
Hi, > > Great, when we get time we will try to upgrade to a newer version of MinGW, > > but it is still a candidate. Just keep an eye on the scoreboard, when we > > upgrade you will see it there. As you can see on the scoreboard, there are > > no issues with the 3.2.3 version > > I have run all but a few of the provided tests, and all looks well. We run all ACE tests, no issues there, we are working on the TAO tests, some of the tests are able to freeze our build system > Out of curiosity, what is required for eliminating the > inline/dllimport issue? Changing all code that uses normal inline, to use ACE_INLINE, remove incorrect export macros, just fix warning by warning. If you can supply patches we are willing to commit them. Furthermore, change the platform_gnuwin32.GNU file that when building dynamic, we disable inline Johnny ...

[tao-users] RE: [ace-users] Linking Errors. #2 #2
Hi, Remove the following line from your makefile: $OPTIONS = -DACE_BUILD_DLL -DTAO_FTRTEVENT_BUILD_DLL The ACE_BUILD_DLL must only be set when you build the ACE dll, the TAO_FTRTEVENT_BUILD_DLL should only be set when you build the FTRTEVENT dll. Johnny > Hi Kitty, > > > The above errors doesn't make sense. Please make sure you > have the correct > > settings for LD_LIBRARY_PATH etc. BTW, which Makefiles are > you using ? The > > ones shipped with ACE/TAO or generated from MPC or ??? > > > > I am using my own Makefile. (I have listed eac...

[tao-users] RE: [ace-users] ACE/TAO on Solaris 10
Hi, There have been some replies. People do have things working on Solaris and there have been made fixes in ACE/TAO. Could you wait another week or so and try the x.4.8 or try cvs, see http://cvs.doc.wustl.edu Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl > Dear list members, > > (I sent this message couple of days ago and am unsure if it > was distributed, > thus re-sending it again. I apologize if you received it more > than once) > > I would like to give feedback regarding availability of > ACE/TAO (versions > 5.4.7 and 1.4.7 respectively) on OpenSolaris (Solaris 10) > Intel platform. > > Sun is selectively releasing source code of the Solaris 10 under an > open-source license. Details of this project and installable Solaris > binaries can be found on here: > http://www.opensolaris.org > > Sun has also released Forte compiler set in binary form to > the OpenSolaris > community. A Quote from their website: "Sun Studio 10 > software is freely > available to participants in the OpenSolaris community for > development on > both OpenSolaris and Solaris[tm] Operating Systems on > SPARC-based systems > and x86-based systems, as well as on Linux." You can get > access to Forte > compilers from the OpenSolaris website as well but you should register...

[tao-users] Re: [ace-users] How to use c++ native exception handling instead of ACE's while building ACE+TAO
Hi, >> My only guess is that all of the libs you are linking in your >> builds were not compiled with a consistent set of options. Right, my recommendation would be to completely blow away your existing ACE+TAO x.5 directory, download a fresh version, and start from a clean slate. It sounds like you may have things lying around from previous build attempts. Thanks, Doug -- Dr. Douglas C. Schmidt Professor and Associate Chair Electrical Engineering and Computer Science TEL: (615) 343-8197 Institute for Software Integrated Systems WEB: www.dre.vanderbilt.edu/~schmidt Vanderbilt University, Nashville TN, 37203 NET: d.schmidt@vanderbilt.edu ...

RE: [tao-users] Re: [ace-users] Re: Announcing the release of the new beta (ACE-5.4.10, TAO-1.4.10 and CIAO-0.4.10)
Hi, > > >> We encourage you to download the new beta, use it with your > > >> applications, and let us know soon if you encounter any problems > > >> since we plan to cut the x.5 release by February 28th. > > > > As per Wallace's comments, we have an aggressive schedule > for the x.5 > > release to meet the needs of some major sponsors. If > people can give > > x.4.10 a "test drive" in the next couple of days and report problems > > they encounter we'll try to ensure that we fix any > showstoppers before > > According to bugzilla bug 2323 is not fixed yet. > > http://deuce.doc.wustl.edu/bugzilla/show_bug.cgi?id=2323 > > For us it is a show stopper. We use the OCI version which does not > have problems related to this bug but it would be nice to be able to > use the latest version with more fixes. FYI, the reason that this test now fails is because Ossama added several new test cases which wheren't in the test in the past, this uncovered some bugs which according to our information where already there a long time. Johnny "Johnny Willemsen" <jwillemsen@remedy.nl> writes: > > > >> We encourage you to download the new beta, use it with your > > > >> applications, and let us know soon if you encounter any problems > > > >> sinc...

[tao-users] RE: [ace-users] Tao_idl core dumps during ACE/TAO build
Hi, Please upgrade to ACE+TAO x.4.7, which you can download from http://deuce.doc.wustl.edu/Download.html under the heading "latest beta kit". The DOC groups at Washington University, UC Irvine, and Vanderbilt University only provide "best effort" support for non-sponsors for the latest beta kit, as described in http://www.cs.wustl.edu/~schmidt/ACE_wrappers/docs/ACE-bug-process.html Thus, if you need more "predictable" help, I recommend that you check out http://www.cs.wustl.edu/~schmidt/commercial-support.html for a list of companies that will provide you with ACE+TAO commercial support. Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl > TAO VERSION: 1.4.1 > ACE VERSION: 5.4.1 > > HOST MACHINE and OPERATING SYSTEM: > Dell PowerEdge750, Slackware Linux 10.1.0 > > TARGET MACHINE and OPERATING SYSTEM, if different from HOST: > COMPILER NAME AND VERSION (AND PATCHLEVEL): > gcc version 3.3.4 > > AREA/CLASS/EXAMPLE AFFECTED: > CosConcurrencyControl.idl failed due to tao_idl core dump > > DOES THE PROBLEM AFFECT: > COMPILATION? Yes > $ACE_ROOT/ace/config.h and > $ACE_ROOT/include/makeinclude/platform_macros.GNU > included below > LINKING? No > EXECUTION? No > OTHER (please specify)? No > > SYNOPSIS: > TAO fails to build because tao_...

[ace-users] RE: [tao-users] Borland Developer Studio 2006 with ACE/TAO
Hi, I'm curious about the current status of ACE/TAO and C++ Builder 2006. Borland shipped the promised fix/update some time ago, but I couldn't find anything about how it works with ACE/TAO. Regards Espen Harlinn ...

[tao-users] Re: [ace-users] timestamps incorrect in ACE+TAO .tar.gz
Hi > It has just come to my attention that there are many files in the > ACE+TAO .tar.gz file with timestamps showing '1970-01-05'. Obviously > this is wrong and is the only reason why my packages have been > rejected from Debian ("file(s) with a time stamp too ancient"). > > Is there a possibility that this will be fixed. Or should I just > 'touch' all the problematic files? Could you please run a touch on them? I don't know how this happened. Strange. Opening and fiddling with the distribution would make quite a few things goofy! If ...

Re: [ace-users] [tao-users] ACE/TAO ported to Sun Studio 12
Hi, > is this change included in the official release of ACT/TAO (and if yes > since which version)? This change will be part of the upcoming x.6.2 version. I am creating x.6.2 at this moment, when everything runs fine it will be available at the end of today. Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl *** Integrated compile and test statistics see http://scoreboard.theaceorb.nl *** *** Commercial service and support for ACE/TAO/CIAO *** *** See http://www.theaceorb.nl/en/support.html *** ...

[tao-users] RE: [ace-users] Re: How to use Any>>=OctetSeq in TAO 1.3.6? #2
Hi, > > Heiko, could you try to add TAO_Export to front of the operators in > > OctetSeqA.h and then rebuild TAO and you app. I think the linker > > errors should be gone. > > this is the solution! Thank you :-) Thanks for the feedback. I have just committed the fix into the repo and this will be in the 1.4 release. Regards, Johnny Willemsen Remedy IT Leeghwaterstraat 25 2811 DT Reeuwijk The Netherlands www.theaceorb.nl / www.remedy.nl ...

[tao-users] Re: [ace-users] Linking Errors. #2
Hi Don: I tried re-ordering the libraries, but it did not help. > > > > ******************************************************************** > > g++ -g -W -Wall -Wno-deprecated -Wpointer-arith -mcpu=pentiumpro -mthreads > > -pipe -fno-exceptions -fcheck-new -L./ -L/cygdrive/c/.... > > -DACE_BUILD_DLL ./Debug/dataC.o > > ./Debug/dataS.o ./Debug/PushConsumer.o ./Debug/FTRTEC_CNIGatewayConsu > > er.o -lsupc++ -lTAO -lACE -lkernel32 -luser32 -lgdi32 -lwinspool > > -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -luuid -lodbc32 -lodbc &g...

RE: [tao-users] RE: [ace-users] XML service configuration no longer works with ACE/TAO 5.4.5/1.4.5
Hi, > > Hi Lothar > > > > > � � ACE VERSION: 5.4.5 > > > > Thanks for using the PRF form. Could you try to find the > problem and send > > us patches to fix this? > > > > Regards, > > > > Johnny Willemsen > > I have no problem committing some time to the problem. I do > however know as > much as nothing about the ACE XML parser and it's recent > changes. It seems to > me that (some) of the recent changes might have caused the > test failures. So > if someone working actively on ACEXML gives me directions I > am willing to > spend my time investigating the problem. I can't remember that work has been done the last months so I am also amazed things broke. Nobody is actively working on it, so I think there are not much directions at this moment. Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl On Wednesday 18 May 2005 11:01, Johnny Willemsen wrote: > Hi, > I can't remember that work has been done the last months so I am also > amazed things broke. Nobody is actively working on it, so I think there are > not much directions at this moment. Well, it did definiteley work with 5.4.4. So any changes that broke it must have been made between 5.4.4 and 5.4.5. I also read in the release email of 5.4.5 in the CIAO...

[tao-users] [ace-users] ACE+TAO x.5.2 RPM for Fedora Core
Greetings, I've uploaded Fedora Core source and binary RPM for ACE+TAO x.5.2 to: http://dist.bonsai.com/ken/ace_tao_rpm/ NOTE - I've enabled ACE_HAS_IPV6 and ACE_USES_IPV4_IPV6_MIGRATION in these builds; please let me know if this causes problems. Please let me know if there are problems/issues. Ken -- Ken Sedgwick Bonsai Software, Inc. (510) 610-4162 ken+5a4@bonsai.com Public Key: http://www.bonsai.com/ken/ken.asc GPG Fingerprint: 851E 3B07 E586 0843 9434 5CC7 4033 3B9B 3F3F 9640 ...

[ace-users] [tao-users] ACE+TAO x.5.2 RPM for Fedora Core
Greetings, I've uploaded Fedora Core source and binary RPM for ACE+TAO x.5.2 to: http://dist.bonsai.com/ken/ace_tao_rpm/ NOTE - I've enabled ACE_HAS_IPV6 and ACE_USES_IPV4_IPV6_MIGRATION in these builds; please let me know if this causes problems. Please let me know if there are problems/issues. Ken -- Ken Sedgwick Bonsai Software, Inc. (510) 610-4162 ken+5a4@bonsai.com Public Key: http://www.bonsai.com/ken/ken.asc GPG Fingerprint: 851E 3B07 E586 0843 9434 5CC7 4033 3B9B 3F3F 9640 ...

[ace-users] [tao-users] ACE/TAO/CIAO x.5.2 release announcement
Hi, Thanks to the substantial efforts by many developers, testers, and users, we are pleased to announce the new x.5.2 ACE+TAO+CIAO beta. The latest beta has been tagged ACE-5.5.2, TAO-1.5.2, and CIAO-0.5.2. As usual, it is available at: http://deuce.doc.wustl.edu/Download.html The doxygen documentation for the beta is available. We do have some missing files in that package which we resolve as soon as possible. We encourage you to download the new beta, use it with your applications, and let us know if you encounter any problems. Please use the: $ACE_ROOT/PROBLEM-REPORT-FORM $TAO_ROOT/PROBLEM-REPORT-FORM $CIAO_ROOT/PROBLEM-REPORT-FORM so that we have the proper version/platform/compiler /options you're using to report problems. We also request that you take a look at $TAO_ROOT/docs/releasenotes for the status of various ongoing projects at the DOC groups of WashU, UCI, and Vanderbilt to move ACE+TAO+CIAO forward. Overviews of our recent progress and upcoming plans are available at $ACE_ROOT/NEWS $TAO_ROOT/NEWS $CIAO_ROOT/NEWS The overall success rates for the test results gathered from all our daily builds is 95.82 for the ACE tests and 93.47 for the TAO tests. Please see http://www.dre.vanderbilt.edu/scoreboard/ for a summary of these tests. As always, we appreciate your help in resolving the remaining problems. Please see ACE_ROOT/docs/ACE-bug-process.html for an overview of our bug fixing policies. ...

[tao-users] [ace-users] ACE/TAO/CIAO x.5.2 release announcement
Hi, Thanks to the substantial efforts by many developers, testers, and users, we are pleased to announce the new x.5.2 ACE+TAO+CIAO beta. The latest beta has been tagged ACE-5.5.2, TAO-1.5.2, and CIAO-0.5.2. As usual, it is available at: http://deuce.doc.wustl.edu/Download.html The doxygen documentation for the beta is available. We do have some missing files in that package which we resolve as soon as possible. We encourage you to download the new beta, use it with your applications, and let us know if you encounter any problems. Please use the: $ACE_ROOT/PROBLEM-REPORT-FORM $TAO_ROOT/PROBLEM-REPORT-FORM $CIAO_ROOT/PROBLEM-REPORT-FORM so that we have the proper version/platform/compiler /options you're using to report problems. We also request that you take a look at $TAO_ROOT/docs/releasenotes for the status of various ongoing projects at the DOC groups of WashU, UCI, and Vanderbilt to move ACE+TAO+CIAO forward. Overviews of our recent progress and upcoming plans are available at $ACE_ROOT/NEWS $TAO_ROOT/NEWS $CIAO_ROOT/NEWS The overall success rates for the test results gathered from all our daily builds is 95.82 for the ACE tests and 93.47 for the TAO tests. Please see http://www.dre.vanderbilt.edu/scoreboard/ for a summary of these tests. As always, we appreciate your help in resolving the remaining problems. Please see ACE_ROOT/docs/ACE-bug-process.html for an overview of our bug fixing policies. ...

[ace-bugs] Re: [tao-users] TAO build errors #2
Hi Jay, I recommend that you upgrade to TAO 1.4.1, which you can download from http://deuce.doc.wustl.edu/Download.html Please try using it and see if things work better. Thanks, Doug >> I d/l the "Latest release" ACE-5.4+TAO-1.4+CIAO-0.4.zip a few days ago, >> and am trying to build it under MSVC6 on Win2K. >> >> The ACE distribution built flawlessly. However, I get build errors >> trying to build ACE_wrappers\TAO\tao\TAO.dsw - it fails to find a number >> of .lib files, and thus I get link errors. >&g...

Re: [ace-users] Re: [tao-users] Re: difficulties compling TAO with mingw and msys
Hi, Great, when we get time we will try to upgrade to a newer version of MinGW, but it is still a candidate. Just keep an eye on the scoreboard, when we upgrade you will see it there. As you can see on the scoreboard, there are no issues with the 3.2.3 version Regards, Johnny Willemsen Remedy IT Leeghwaterstraat 25 2811 DT Reeuwijk The Netherlands www.theaceorb.nl / www.remedy.nl "William Lederer" <wgl@localhost.localdomain> wrote in message news:<m3pt4yrtfx.fsf@localhost.localdomain>... > Thanks! > > I followed your advice in your earlier mail and dropped back to the > 3.2.3 version of the compiler, and things work much better. I had > tried an intermediate version, I think it was 3.3, and all compiles > ended in a disaster, with the assembler choking on each file; thus I > moved to the next version. Not realizing that there would be many > issues. > > I will use 3.2 for now, and monitor how things progress in ACE getting > adapted to newer releases. > > William Lederer > wgl at ciexinc.com "Johnny Willemsen" <jwillemsen@remedy.nl> writes: > Hi, > > Great, when we get time we will try to upgrade to a newer version of MinGW, > but it is still a candidate. Just keep an eye on the scoreboard, when we > upgrade you will see it there. As you can see on the scoreboard, there are > no issues with the 3.2.3 version I have run all ...

[tao-users] RE: [ace-users] TAO Valuetype: Compile error on AIX 5.1
Hi, > ACE VERSION: 5.4.6 Thanks for using the PRF form. Btw, this is an TAO issue, so please use tao-users > > HOST MACHINE and OPERATING SYSTEM: AIX 5.1 > > TARGET MACHINE and OPERATING SYSTEM, if different from HOST: N/A > > COMPILER NAME AND VERSION (AND PATCHLEVEL): GNU G++ version 3.4.3 > > THE $ACE_ROOT/ace/config.h FILE: Contents of file are: > > #include "config-aix-5.x.h" > > THE $ACE_ROOT/include/makeinclude/platform_macros.GNU FILE: > > static_libs_only=1 > optimize=0 > exceptions=1 > ami=0 > include $(ACE_ROOT)/include/makeinclude/platform_aix_g++.GNU > > > CONTENTS OF > $ACE_ROOT/bin/MakeProjectCreator/config/default.features > (used by MPC when you generate your own makefiles): I haven't > generated any makefiles > > AREA/CLASS/EXAMPLE AFFECTED: > > Valuetype library compilation: > > > DOES THE PROBLEM AFFECT: Compilation > COMPILATION? Yes > On Unix systems, did you run make realclean first? Yes > > SYNOPSIS: > I untarred the 5.4.6 version of ACE+TAO. > I created config.h as noted above > I created platform_macros.GNU as noted above > I compiled libACE.a by cd'ing to ace directory and running 'make' > I then ...

[tao-users] RE: [ace-users] TAO:Upcall_Wrapper::upcall, undefined symbol link error
Hi, Could you post the idl and the commandline how you compile it? Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl > -----Original Message----- > From: Alex Sheh [mailto:ASHEH@euphonix.com] > Sent: dinsdag 7 februari 2006 19:34 > To: jwillemsen@remedy.nl; ace-users@cs.wustl.edu > Subject: RE: [ace-users] TAO:Upcall_Wrapper::upcall, > undefined symbol link error > > Hi Johnny, > Yes, I recompiled a 5.4.8 tao_idl, and then recompiled the custom idl > using the 5.4.8 tao_idl. > > Thanks, > Alex > > -----Original Message----- > From: Johnny Willemsen [mailto:jwillemsen@remedy.nl] > Sent: Tuesday, February 07, 2006 3:09 AM > To: Alex Sheh; ace-users@cs.wustl.edu > Subject: RE: [ace-users] TAO:Upcall_Wrapper::upcall, undefined symbol > link error > > Hi, > > > ACE VERSION: 5.4.8 > > Thanks for using the PRF form > > > HOST MACHINE and OPERATING SYSTEM: > > > > G5, MacOSX 10.4.3 > > > > TARGET MACHINE and OPERATING SYSTEM, if different from HOST: > > > > COMPILER NAME AND VERSION (AND PATCHLEVEL): > > > > THE $ACE_ROOT/ace/config.h FILE > > > > config-macosx-tiger.h > > > > THE $ACE_ROOT/include/makeinclude/platform_macros.GNU FILE > > > > Platform_macosx_tig...

Web resources about - [tao-users] RE: [ace-users] Error in $TAO_ROOT/tao on Cygwin #2 - comp.soft-sys.ace

Resources last updated: 3/5/2016 5:54:15 PM