f



RE: [ace-users] Re: ACE 5.4.0 won't compile after GCC upgrade (3.3.3 -> 3.4.3) #2

Hi Colm,

Ok, thanks for that explanation.

I solved this a different way for a similar problem that showed up
with Visual Age C++ on AIX 5.2... When the 5.4.5 beta comes out,
please try this again and hopefully no further workarounds will be
needed.

Thanks,

-Steve











































--
Steve Huston, Riverace Corporation
Adding Service to Open Source Software
ACE book info at http://www.riverace.com/acebooks/

> -----Original Message-----
> From: Colm McHugh [mailto:cmchugh@callixa.com] 
> Sent: Wednesday, April 13, 2005 1:05 PM
> To: Steve Huston
> Cc: ace-users@cs.wustl.edu
> Subject: Re: [ace-users] Re: ACE 5.4.0 won't compile after 
> GCC upgrade (3.3.3 -> 3.4.3)
> 
> 
> 
> >Sure... Why do you say <sys/machine.h> is a prerequisite for
> ><netinet/tcp.h>? I addressed a problem related to this in 
> the autoconf
> >support for AIX that'll go in the next beta, but it doesn't involve
> >machine.h.
> >
> Hi Steve,
> 
> that statement is based on the compilation sequence shown 
> below (done on 
> an AIX 5.2):
> 
> $ cat t2.cpp
> #include <sys/machine.h>
> #include <netinet/tcp.h> 
> int main()
> {}
> $ g++ t2.cpp
> $ cat t1.cpp
> #include <netinet/tcp.h>
> int main()
> {}
> $ g++ t1.cpp
> In file included from /usr/include/netinet/tcp.h:78,
>                  from t1.cpp:1:
> /usr/include/netinet/ip.h:119: error: declaration of `int 
> ip_firstfour::<anonymous union>::<anonymous struct>::ip_xhl'
> /usr/include/netinet/ip.h:114: error: conflicts with previous 
> declaration `unsigned int ip_firstfour::<anonymous
union>::<anonymous 
> struct>::ip_xhl'
> /usr/include/netinet/ip.h:120: error: declaration of `int 
> ip_firstfour::<anonymous union>::<anonymous struct>::ip_xv'
> /usr/include/netinet/ip.h:113: error: conflicts with previous 
> declaration `unsigned int ip_firstfour::<anonymous
union>::<anonymous 
> struct>::ip_xv'
> /usr/include/netinet/ip.h:121: error: declaration of `int 
> ip_firstfour::<anonymous union>::<anonymous struct>::ip_xtos'
> /usr/include/netinet/ip.h:115: error: conflicts with previous 
> declaration `unsigned int ip_firstfour::<anonymous
union>::<anonymous 
> struct>::ip_xtos'
> /usr/include/netinet/ip.h:122: error: declaration of `int 
> ip_firstfour::<anonymous union>::<anonymous struct>::ip_xlen'
> /usr/include/netinet/ip.h:116: error: conflicts with previous 
> declaration `unsigned int ip_firstfour::<anonymous
union>::<anonymous 
> struct>::ip_xlen'
> $
> I experienced the same error when trying to build ACE after running 
> configure, and I changed an ACE header file (can't remember 
> which one) 
> to include machine.h, and then it compiled.
> 
> Thanks,
> Colm.
> 



0
Steve
4/13/2005 5:41:09 PM
comp.soft-sys.ace 20326 articles. 1 followers. marlow.andrew (167) is leader. Post Follow

0 Replies
1258 Views

Similar Articles

[PageSpeed] 26

Reply:

Similar Artilces:

Re: [ace-users] Errors while compiling c++ 3.4.2
Hi Eyal, I believe we've fixed these problems in the latest version of ACE that's tucked inside our CVS repository. Can you please take a look at this version available in http://deuce.doc.wustl.edu/Download.html and see if things work better. If not, please let us know so we can fix them before we release ACE 5.4.3 in a week or so. Thanks, Doug >> I get the following while compiling: >> >> /usr/bin/c++ -D_POSIX_C_SOURCE=199506L -DNDEBUG -DUSING_GCC >> -D_POSIX_PTHREAD_SEMANTICS -DLINUX -I../inc >> -I../3rd_party...

Re: [ace-users] Compiling ACE 5.3 with GCC 3.4.3
Hi, When x.3 was released there was no GCC 3.4 version, so this will just not work, please upgrade to a newer version of ACE/TAO. Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl "Seng-Quee.Liang" <Seng-Quee.Liang@Sun.COM> wrote in message news:<mailman.1894.1170813530.25808.ace-users@mail.cse.wustl.edu>... > Hi, > > I'm a newbie to ACE and this is my 1st posting to this alias, and would > appreciate any help. > > I have a requirement to use ACE 5.3 on Solaris 10 SPARC. I had followed > the building & installation information on ACE website to the letter and > had no problems compiling it with Sun Studio 11. > > However, when I tried compiling it with GCC 3.4.3, I'm swamped with a > host of problems. Being a newbie to ACE, I'm wondering > > a) if I'm setting the right config.h/platform_macros.GNU for GCC > compile; > b) if I should be trying add flags into these files to get it to > compile. > > Any pointers or advice is sincerely appreciated. > > > Thanks in advance. > > Best Regards, > /SengQuee > > -------- config.h for Studio 11 ----- > #include "ace/config-sunos5.9.h" > > -------- platform_macros.GNU for Studio 11 ----- > include $(ACE_ROOT)/include/makeinclude/platform_sunos5_sunc++.GNU &...

[ace-users] Re: Error while ACE 5.3.1 or 5.4.1 compiling and installing by MinGW 3.3.3
Hi Vitaly, Please upgrade to ACE 5.4.4, which you can download from http://deuce.doc.wustl.edu/Download.html since I think that is more likely to work with MinGW 3.3.3. Johnny, can you confirm/deny this please? Thanks, Doug >> Hi, >> I have installed MinGW packages: >> >> binutils-2.13.90-20030111-1.tar.gz >> gcc-core-3.3.3-20040217-1.tar.gz >> gcc-g++-3.3.3-20040217-1.tar.gz >> mingw-runtime-3.3.tar.gz >> w32api-2.5.tar.gz >> >> Also I've configured environment due to ACE-INSTALL.html according >> MinGW compiler. OS: WinXP SP2. >> >> $ACE_ROOT=F:\ACE531 >> >> I get next compiling error: >> F:\ACE531\ace>gmake >> gmake.EXE[1]: Entering directory `F:/ACE531/ace' >> d:\Utils\Unix\diff.EXE: -: Invalid argument >> gmake.EXE[1]: Leaving directory `F:/ACE531/ace' >> gmake.EXE[1]: Entering directory `F:/ACE531/ace' >> d:/Utils/Unix/gmake.EXE -f Makefile.dirs SUBDIR_TARGET=all >> RMCast.subdir >> gmake.EXE[2]: Entering directory `F:/ACE531/ace' >> d:/Utils/Unix/gmake.EXE -f Makefile -C RMCast all >> gmake.EXE[3]: Entering directory `F:/ACE531/ace/RMCast' >> Installing libACE_RMCast.dll -> F:\ACE531/ace >> d:\Utils\Unix\cp.EXE: F:ACE531aceRMCast/libACE_RMCast.dll: No such >> file or directory >> Installing libACE_RMCa...

Re: [ace-users] Re: ACE 5.4 compiling problems with g++ 3.4.3
Hi > First, please use the problem-report-form when asking questions. ACE 5.4 is > not supported with newer GCC versions. All these issues are resolved in the > upcoming x.4.3 release. > > For the time being, try to add the following to your config.h > > # if (__GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)) > # define ACE_EXPLICIT_TEMPLATE_DESTRUCTOR_TAKES_ARGS > # endif /* __GNUC__ >= 3.4 */ > > You are correct, the download link doesn't work. Bala, do you have an idea > what is happening with the downlo...

[ace-users] Compiling ACE 5.3 with GCC 3.4.3
Hi, I'm a newbie to ACE and this is my 1st posting to this alias, and would appreciate any help. I have a requirement to use ACE 5.3 on Solaris 10 SPARC. I had followed the building & installation information on ACE website to the letter and had no problems compiling it with Sun Studio 11. However, when I tried compiling it with GCC 3.4.3, I'm swamped with a host of problems. Being a newbie to ACE, I'm wondering a) if I'm setting the right config.h/platform_macros.GNU for GCC compile; b) if I should be trying add flags into these files to get it to compile. Any pointers or advice is sincerely appreciated. Thanks in advance. Best Regards, /SengQuee -------- config.h for Studio 11 ----- #include "ace/config-sunos5.9.h" -------- platform_macros.GNU for Studio 11 ----- include $(ACE_ROOT)/include/makeinclude/platform_sunos5_sunc++.GNU -------- config.h for GCC 3.4.3 -------- #include "ace/config-sunos5.4-g++.h" -------- platform_macros.GNU for GCC 3.4.3 --------- include $(ACE_ROOT)/include/makeinclude/platform_sunos5_g++.GNU --------- Compilation output with GCC ------------------------------ gmake[1]: Entering directory `/export/sw-images/ace/ACE_wrappers/ace' g++ -W -Wall -Wpointer-arith -pipe -O3 -g -fno-exceptions -fcheck-new -D_REENTRANT -I/export/sw-images/ace/ACE_wrappers -DACE_BUILD_DLL -DACE_OS_BUILD_DLL -c -fPIC -o .shobj/Basic_Types.o Basic_Types.cpp In file...

[ace-users] Errors while compiling c++ 3.4.2
I get the following while compiling: /usr/bin/c++ -D_POSIX_C_SOURCE=199506L -DNDEBUG -DUSING_GCC -D_POSIX_PTHREAD_SEMANTICS -DLINUX -I../inc -I../3rd_party/ACE-5.3.0/ACE_wrappers -fPIC -pedantic -fno-for-scope -Wno-long-long -Wno-deprecated -o Trace.o.linux -c Trace.cpp In file included from .../3rd_party/ACE-5.3.0/ACE_wrappers/ace/Unbounded_Set.h:306, from ../3rd_party/ACE-5.3.0/ACE_wrappers/ace/Memory_Pool.h:30, from ../3rd_party/ACE-5.3.0/ACE_wrappers/ace/Malloc.h:414, from ../3rd_party/ACE-5.3.0/ACE_wrappers/ace/String_Base....

RE: [ace-users] Re: ACE 5.4 compilation error on HP-UX 11.11/GNU g++ 3.4.3
The needed fix is, indeed, in ACE 5.5. If, for some reason, you need to stay on 5.4, the 5.4e Fix Kit from Riverace has this problem fixed as well. The fix is needed for g++ 3.4 on any platform. -Steve -- Steve Huston, Riverace Corporation Helping you succeed with ACE See http://www.riverace.com/support.htm > -----Original Message----- > From: owner-ace-users@cse.wustl.edu > [mailto:owner-ace-users@cse.wustl.edu] On Behalf Of Douglas C. Schmidt > Sent: Saturday, March 11, 2006 7:01 PM > To: ecoboja@yahoo.com; ace-users@cs.wustl.edu > Subject: [ace-users] Re: ACE 5.4 compilation error on HP-UX > 11.11/GNU g++ 3.4.3 > > > Hi, > > Thanks for using the PRF. > > >> ACE VERSION: 5.4 > > Please upgrade to ACE 5.5, which you can download from > > http://deuce.doc.wustl.edu/Download.html > > The DOC groups at Washington University, UC Irvine, and Vanderbilt > University only provide "best effort" support for non-sponsors for the > latest release, as described in > > http://www.cs.wustl.edu/~schmidt/ACE_wrappers/docs/ACE-bug-pro > cess.html > > Thus, if you need more "predictable" help for ACE 5.4, I recommend > that you check out > >...

RE: [ace-users] ACE 5.3
This is a multi-part message in MIME format. ------=_NextPart_000_01BC_01C5D46D.2EF26B10 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Hi Praveen, =20 Riverace will have an AIX 5.3/Visual Age 7 machine running next week. We have a sponsor for porting ACE 5.4 to the platform. If you'd like to sponsor us porting back to ACE 5.3, please let me know. =20 Best regards, =20 -Steve -- Steve Huston, Riverace Corporation "How to Use ACE Effectively" class Oct 17-19! See http://www.riverace.com/training.htm -----Original Message----- From: owner-ace-users@cse.wustl.edu [mailto:owner-ace-users@cse.wustl.edu] On Behalf Of Praveen Kumar Gulati Sent: Wednesday, October 19, 2005 3:08 AM To: ace-users@cs.wustl.edu Subject: [ace-users] ACE 5.3 - TAO 1.3 on AIX 5.3 with compiler Visual Age Version 7.0 Hi I am trying to build ACE 5.3 - TAO 1.3 on AIX 5.3 with compiler Visual Age Version 7.0. Do you already know some issues in above combination?=20 Whether some one is already using above combination? Regards Praveen Gulati ------=_NextPart_000_01BC_01C5D46D.2EF26B10 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; = charset=3Dus-ascii&q...

[tao-users] Re: ACE+TAO+CIAO
Hi folks, It's been a long time (5 months) since we put out the x.4.2 ACE+TAO+CIAO beta, and the current x.4.3 beta contains many improvements, fixes, and new features. It would be great if you could put this through its paces and let us know what problems you find so we can fix them ASAP. We plan to release the x.4.4 beta fairly soon (i.e., within a month), so your thorough testing will greatly improve its stability and portabilty! Thanks very much, Doug >> Since this is the season of giving, we are happy to announce a new beta >> of ACE-5....

[ace-users] Re: ACE 5.4 compiling problems with g++ 3.4.3
Hi Klaus, First, please use the problem-report-form when asking questions. ACE 5.4 is not supported with newer GCC versions. All these issues are resolved in the upcoming x.4.3 release. For the time being, try to add the following to your config.h # if (__GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)) # define ACE_EXPLICIT_TEMPLATE_DESTRUCTOR_TAKES_ARGS # endif /* __GNUC__ >= 3.4 */ You are correct, the download link doesn't work. Bala, do you have an idea what is happening with the download links. Regards, Johnny Willemsen Remedy IT ...

[ace-users] Re: Compiling ACE 5.4 with gcc 3.4.2 (fc3) #2
Hi, Thanks for using the PRF form. ACE 5.4 doesn't work with GCC 3.4.2, you will end up with much more problems. We recommend you to upgrade to the x.4.4 version which you can obtain from http://deuce.doc.wustl.edu/Download.html Regards, Johnny Willemsen Remedy IT Leeghwaterstraat 25 2811 DT Reeuwijk The Netherlands www.theaceorb.nl / www.remedy.nl "Syn" <syn_net@noos.fr> wrote in message news:<1110289867.262543.50690@l41g2000cwc.googlegroups.com>... ACE VERSION: 5.4 HOST MACHINE and OPERATING SYSTEM: Linux 2.6.9-1.667 (Fedora Core 3) COMPILER NAME AND VERSION (AND PATCHLEVEL): g++ (GCC) 3.4.2 (Red Hat 3.4.2-6.fc3) CONTENTS OF $ACE_ROOT/ace/config.h: symbolic link to $ACE_ROOT/ace/config-linux.h I have not edited the file. CONTENTS OF $ACE_ROOT/include/makeinclude/platform_macros.GNU : symbolic link to $ACE_ROOT/include/makeinclude/platform_linux.GNU I have not edited the file. DOES THE PROBLEM AFFECT: COMPILATION? YES DESCRIPTION : I am a very neewbie and if my problem isn't a real one, I apologize by advance. But I spent a lot a time to find the solution in this forum but I can't find it :( So, here is the decription, in a first step I applied modification in the file $ACE_ROOT/ace/Global_Macros.h as descibed here : url=<http://groups-beta.google.com/group/comp.soft-sys.ace/browse_frm/thread /b1c8e54cfa298f4b?tvc=1&q=gcc+3.4> The compilation can go on and I obtained ...

RE: [ace-users] ACE 5.3
Hi, 5.3 is ancient, visual age 7 is brand new, I don't think anyone is using this and you problaby will find issues because this is not tested. Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl > -----Original Message----- > From: owner-ace-users@cse.wustl.edu > [mailto:owner-ace-users@cse.wustl.edu] On Behalf Of Praveen > Kumar Gulati > Sent: woensdag 19 oktober 2005 9:08 > To: ace-users@cs.wustl.edu > Subject: [ace-users] ACE 5.3 - TAO 1.3 on AIX 5.3 with > compiler Visual Age Version 7.0 > > Hi > > I am trying to build ACE 5.3 - TAO 1.3 on AIX 5.3 with > compiler Visual Age Version 7.0. > > Do you already know some issues in above combination? > > Whether some one is already using above combination? > > Regards > > Praveen Gulati > > ...

Re: [ace-users]: ACE 5.4.2 and ACE 5.4.3 compile failed on Solaris 9 x86 and Solaris 10 x86 #2
Johnny- > Ok, the problem is in platform_sunos5_sunc++.GNU, when a not known forte > version is found, it defaults to explicit. I am updating right now, for 4.2 > and 5.3 we default to explicit, for all others to implicit Is this necessary? I mean make it implicit by default. The explicit is not even supported, and has no chance to work cleanly. Why should we patch broken stuff. Just a thought? > Qinghuajin and other Forte 9 users, you can work around this by added the > following line to your platform_macros.GNU file. > templates = implicit This is until w...

RE: [ace-users]: ACE 5.4.2 and ACE 5.4.3 compile failed on Solaris 9 x86 and Solaris 10 x86 #2
Hi, > > > ACE VERSION: 5.4.3 > > > > > > HOST MACHINE and OPERATING SYSTEM: > > > Solaris10 X86 > > > TARGET MACHINE and OPERATING SYSTEM, if different from HOST: > > > COMPILER NAME AND VERSION (AND PATCHLEVEL): > > > Compiler: SUN CC 5.6 > ^^^^^^^^^^^^^^^^^^^^^^^^ > > I don't think the DOC group supports this compiler anymore.. More > particularly this compiler is buggy and you may land up with > unresolved > symbols even if you get past this pa...

RE: [ace-users]: ACE 5.4.2 and ACE 5.4.3 compile failed on Solaris 9 x86 and Solaris 10 x86 #2
Hi, > > Ok, the problem is in platform_sunos5_sunc++.GNU, when a > not known forte > > version is found, it defaults to explicit. I am updating > right now, for 4.2 > > and 5.3 we default to explicit, for all others to implicit > > Is this necessary? I mean make it implicit by default. The > explicit is > not even supported, and has no chance to work cleanly. Why > should we patch > broken stuff. Just a thought? I have thought also about this, but maybe there are users around we don't know if. We can drop all this after x.5 is released, until that time, I just keep it there, just as we have a lot of other stuff that is probably broken. > > Qinghuajin and other Forte 9 users, you can work around > this by added the > > following line to your platform_macros.GNU file. > > templates = implicit > > This is until we release x.4.4., right? Yes, with x.4.4 this will be done correctly. Johnny ...

Re: [ace-users]: ACE 5.4.2 and ACE 5.4.3 compile failed on Solaris 9 x86 and Solaris 10 x86 #2
Hi Jin, Thanks for using the PRF. >> ACE VERSION: 5.4.3 >> >> HOST MACHINE and OPERATING SYSTEM: >> Solaris 10 x86 >> >> TARGET MACHINE and OPERATING SYSTEM, if different from HOST: >> COMPILER NAME AND VERSION (AND PATCHLEVEL): >> Sun Studio 9 (Sun CC 5.6) As we've mentioned several times now, we don't have this compiler installed yet on this hardware platform, so if you want things to be fixed soon I recommend you figure out what's going wrong and send us the patches. Otherwise, pl...

Re: [ace-users]: ACE 5.4.2 and ACE 5.4.3 compile failed on Solaris 9 x86 and Solaris 10 x86 #2
Hi Everyon: My SunBlade 150 is back up and available, and has a Sun CC license, though I don't have a lot of bandwidth to admin it. Bala know where it is and has the root password. I'll probably move it into the server room once I have a chance to talk to Dan about it, but I my be out of town this week. [dhinton@blade DRM]$ uname -a SunOS blade 5.9 Generic_112233-03 sun4u sparc SUNW,Sun-Blade-100 Solaris [dhinton@blade DRM]$ CC -V CC: Forte Developer 7 C++ 5.4 2002/03/09 [dhinton@blade DRM]$ gcc --version gcc (GCC) 3.4.2 Copyright (C) 2004 Free Software Foundation, ...

Re: [ace-users]: ACE 5.4.2 and ACE 5.4.3 compile failed on Solaris 9 x86 and Solaris 10 x86 #2
Hi > > ACE VERSION: 5.4.3 > > > > HOST MACHINE and OPERATING SYSTEM: > > Solaris10 X86 > > TARGET MACHINE and OPERATING SYSTEM, if different from HOST: > > COMPILER NAME AND VERSION (AND PATCHLEVEL): > > Compiler: SUN CC 5.6 ^^^^^^^^^^^^^^^^^^^^^^^^ I don't think the DOC group supports this compiler anymore.. More particularly this compiler is buggy and you may land up with unresolved symbols even if you get past this part. My $0.02. Thanks Bala > > Make: ...

RE: [ace-users]: ACE 5.4.2 and ACE 5.4.3 compile failed on Solaris 9 x86 and Solaris 10 x86 #2
Hi Steve, > > Is this necessary? I mean make it implicit by default. The > > explicit is > > not even supported, and has no chance to work cleanly. Why > > should we patch > > broken stuff. Just a thought? > > At least for ACE 5.5, Riverace supports the Forte compiler that > requires explicit. After that, we can drop it. Ok. Steve, could you maybe make clear with the build names which builds use explicit templates? Explicit templates in TAO are known to be broken at this moment. Johnny ...

Re: [ace-users]: ACE 5.4.2 and ACE 5.4.3 compile failed on Solaris 9 x86 and Solaris 10 x86 #2
Hi Jin, >> I rebuild the ACE package according the instruction above,but get >> the same result. It doesn't look to me like you've added -DACE_HAS_X86_STAT_MACROS to the build-line as recommended by Johnny Willemsen. >> my platform_macros.GNU file has the following lines: >> >> templates = implicit >> include $(ACE_ROOT)/include/makeinclude/platform_sunos5_sunc++.GNU >> >> When i rebuild the ACE library,get the following compile errors: >> $ make inline=0 -j 2 -k -f GNUmakefile.ACE >> ... >&...

RE: [ace-users]: ACE 5.4.2 and ACE 5.4.3 compile failed on Solaris 9 x86 and Solaris 10 x86 #2
> > Ok, the problem is in platform_sunos5_sunc++.GNU, when a > not known forte > > version is found, it defaults to explicit. I am updating > right now, for 4.2 > > and 5.3 we default to explicit, for all others to implicit This sounds good. > Is this necessary? I mean make it implicit by default. The > explicit is > not even supported, and has no chance to work cleanly. Why > should we patch > broken stuff. Just a thought? At least for ACE 5.5, Riverace supports the Forte compiler that requires explicit. After that, we can drop it....

RE: [ace-users]: ACE 5.4.2 and ACE 5.4.3 compile failed on Solaris 9 x86 and Solaris 10 x86 #2
> Ok. Steve, could you maybe make clear with the build names > which builds use explicit templates? I'll try to get this clarified. > Explicit templates in TAO are known to be broken at this > moment. None of the tests at Riverace try to build TAO. -Steve ...

RE: [ace-users]: ACE 5.4.2 and ACE 5.4.3 compile failed on Solaris 9 x86 and Solaris 10 x86 #2
Hi, > >> It's almost up. There are some issues with installing software as > >> we don't have the media in a compatible form yet. We also don't > >> have Sun CC, and we need to purchase a licence if we need to > >> support Sun CC. > > Ok, that's fine - thanks for the update. I think some other folks > (e.g., LMCO ATL and Remedy) have Solaris 9/10 and Sun CC, so we may > not need to worry about running Sun CC on our machine. Johnny/Gautam, > can you folks please confirm/deny whether you've got Sun CC on Solar...

Re: [ace-users]: ACE 5.4.2 and ACE 5.4.3 compile failed on Solaris 9 x86 and Solaris 10 x86 #2
Johnny- > > > > ACE VERSION: 5.4.3 > > > > > > > > HOST MACHINE and OPERATING SYSTEM: > > > > Solaris10 X86 > > > > TARGET MACHINE and OPERATING SYSTEM, if different from HOST: > > > > COMPILER NAME AND VERSION (AND PATCHLEVEL): > > > > Compiler: SUN CC 5.6 > > ^^^^^^^^^^^^^^^^^^^^^^^^ > > > > I don't think the DOC group supports this compiler anymore.. More > > particularly this compiler is buggy and you may land up with ...

RE: [ace-users]: ACE 5.4.2 and ACE 5.4.3 compile failed on Solaris 9 x86 and Solaris 10 x86 #2
Hi, > > > I don't think the DOC group supports this compiler anymore.. More > > > particularly this compiler is buggy and you may land up with > > > unresolved > > > symbols even if you get past this part. > > > > I missed the compiler version. But, Forte 8 gives output of > SUN C++ 5.5. Ok, the problem is in platform_sunos5_sunc++.GNU, when a not known forte version is found, it defaults to explicit. I am updating right now, for 4.2 and 5.3 we default to explicit, for all others to implicit Qinghuajin and other Forte...

Web resources about - RE: [ace-users] Re: ACE 5.4.0 won't compile after GCC upgrade (3.3.3 -> 3.4.3) #2 - comp.soft-sys.ace

Samsung Galaxy Ace 4 User Reviews
Samsung Galaxy Ace 4 reviews written by Phone Arena users. You can read the opinion of each user and how they rate the phone in 11 categories. ...

Samsung Galaxy Ace 3 official: iPhone-alike size for the new user
Samsung has revealed another in its Galaxy series, the Galaxy Ace 3, now targeting entry-level smartphone users who want a pocket-friendly 4-inch ...

Resources last updated: 3/5/2016 5:07:24 PM