f



calling '!' or 'system' in matlab different than same functions from shell

Hi everyone,

When I am in the shell (tcsh) on my Mac (outside Matlab), I am able to
use the command line utility ncdump to read netcdf format files
(http://www.unidata.ucar.edu/software/netcdf/):

ncdump -h testfile.nc

However, in Matlab, the same command preceded by the '!' (or using
'system') generates an error:

>> !ncdump -h test.nc

dyld: Library not loaded: /opt/local/lib/libnetcdf.7.dylib
  Referenced from: /opt/local/bin/ncdump
  Reason: Incompatible library version: ncdump requires version 10.0.0
or later, but libnetcdf.7.dylib provides version 9.0.0
Trace/BPT trap
ncdump -h test.nc: Trace/breakpoint trap

I'm unable to figure out why the command preceded by '!' in Matlab
does not invoke the same libraries as the command in the shell.
Following a previous listserve thread, I've changed the matlab startup
path so it should search through the same directories as the shell,
but that doesn't help. I'm running Matlab R2012a (7.14.0.739) on Mac
OS 10.7.3.

Thanks for any suggestions,
Andrew
0
andfried (3)
4/16/2012 4:13:44 PM
comp.soft-sys.matlab 211266 articles. 19 followers. lunamoonmoon (257) is leader. Post Follow

0 Replies
1006 Views

Similar Articles

[PageSpeed] 15

Reply:

Similar Artilces:

'^=' and '~='?
Hello, What is the difference between '^=' and '~='? Thanks, Duckhye ...

'''''''''''''The Running Update/Append Queries Using VBA code Ordeal''''''''''''''
Hello fellow programmers, I am trying to run an append/update query from code, a command button on a form initiates the queries. the format i am using is; _____________________________________________________ SELECT "criteria" FROM "criteria" WHERE "criteria" UPDATE/APPEND "field selections" RecordSource "qryExample" = above text strings" _______________________________________________________________________ When i am running a SELECT query in this manner it works fine with no problems, and accepts the values of specified linked form fields. This never works when doing an APPEND/UPDATE query. It can never find the values of linked form fields, Access always asks for the parameter value of the field(s) in question, or Access comes up with an error 3323 - No recordset. I am sure there are other people that have had this problem. What is the difference between Select queries and append/update queries? the append/update queries never seem to be able to find values in linked form fields. Can anyone shed any light on this or point to a knowledgebase Item, or even recommend a book focusing on this subject, I will go and buy it now. I have been for up 2 nights trying to acomplish this and now considering suicide, please help. Thanks In advance, Aaron. I know of two ways you can accomplish this. 1. You can create the SQL script for you append or update query and run the script with DoCmd.RunSQL. 2. You can create a...

error: expected '=', ',', ';', 'asm' or '__attrib
Hi I'm trying to compile an ADC Driver & come acrosss the following error. I've no experience writing drivers before, and hence have no clue how to fix it. Hope someone out there has encountered the problem & suggesst a fix for the same. The Error is I get is : qadc.c: At top level: qadc.c:97: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'qadc_read' make: *** [qadc.o] Error 1 [root@localhost qadc]# ########################################################################### ADC Driver Code ########################################################################### #define MODULE #define __KERNEL__ #include <linux/config.h> #include <linux/module.h> #include <linux/kernel.h> /* printk */ #include <linux/fs.h> / #include <linux/errno.h> /* error codes */ #include <linux/types.h> /* size_t */ #include <linux/proc_fs.h> /* proc file system */ #include <linux/fcntl.h> #include <asm/system.h> /* cli, flags */ #include <asm/uaccess.h> /* copy from/to user */ /*Registers to get qadc access*/ volatile unsigned short * qadcmcr = (unsigned short *)0x40190000; volatile unsigned short * qacr0 = (unsigned short *)0x4019000a; volatile unsigned short * qacr1 = (unsigned short *)0x4019000c; volatile unsigned short * qacr2 = (unsigned short *)0x4019000e; volatile unsigned short * qasr0 = (unsigned short *)0x40190010; volatile unsigned short * qasr1...

replacement for '{' and '}' ?
I am still playing around with what kind of syntax I would like to mark up my documents. Are there equivalent long substitutes for { and } when they are not used to describe arguments to functions? Something like \begin{group} and \end{group}. In other words, if I could force myself to write, say, \begin{group} \it ... \end{group} instead of {\it ... }, then I believe I could identify from the markup context what is an argument that belongs to a just invoked macro and what is text. {Of course, in this context, \textit{...} would be better.} No more ambiguity whether a in \myfunction{a} is an argument or just text. Is there a way to make latex barf when it sees an ordinary '{' in text, rather than \begin{group}, but not barf when I want it (to denote macro arguments)? Regards, /iaw On Aug 16, 6:01=A0pm, "ivo...@gmail.com" <ivo...@gmail.com> wrote: > Is there a way to make latex barf when it sees an ordinary '{' in > text, rather than \begin{group}, but not barf when I want it (to > denote macro arguments)? What do you mean exactly? I don't understand. Do you have in mind your- to-be-new-syntax or just regular latex? Cheers, Tomek ivowel@gmail.com wrote: > I am still playing around with what kind of syntax I would like to > mark up my documents. > > Are there equivalent long substitutes for { and } when they are not > used to describe arguments to functions? Something like \begin{group} > and \end{gr...

'[OFF]' as in 'offensive'???
Hi, given that 'off-topicness' is indicated as '[OT]' and taking a look at those postings that started the threads indicated as '[OFF]' (which may both be seen as being somewhat offensive) may lead to the conclusion that '[OFF]' stands for offensiveness. I don't think that this is the intended meaning so what actually *does* '[OFF]' mean? I never came across that abbreviation before (although I have been around on the USENET for quite some time) but maybe it is worth knowing? Josef 'Jupp' Schugt NOTE: mails >100 KiB are ignored -- German edition of comp.lang.ruby FAQ - http://oss.erdfunkstelle.de/ruby/ Aurox Linux - http://qurl.net/7q | http://qurl.net/7r - Firefox Thunderbird - http://qurl.net/7s | http://qurl.net/7t - Liferea Enigmail - http://qurl.net/7u | http://qurl.net/7v - GnuPG [Josef 'Jupp' Schugt <jupp@gmx.de>, 2004-12-10 23.20 CET] > I don't think that this is the intended meaning so what actually *does* > '[OFF]' mean? Off-topic. ...

Re: '^=' and '~='?
Duckhye, According to the doc ( http://xrl.us/befwjx ) they, and one other set of characters, and the mnemonic 'NE' all represent 'NOT EQUAL'. Art ------- On Wed, 11 Feb 2009 16:52:40 -0600, Duck-Hye Yang <dyang@CHAPINHALL.ORG> wrote: >Hello, >What is the difference between '^=' and '~='? > >Thanks, >Duckhye ...

Like '' & '' & ''
Having this description column in a table "Cookies, peanut butter sandwich, regular" When using this WHERE clause: WHERE (((Food_Data.Description) Like "*Butter*" & "*Peanut*")); I dont get any results, however when using it this way round WHERE (((Food_Data.Description) Like "*Peanut*" & "*Butter*")); I get the row as expected. I assume that the query looks for them in order. Is there a way i can get around this and make the query search for both keywords no matter which order i ype them in. Thanks Dave [posted and mailed] SkunkDave (dave_casserly@totalise.co.uk) writes: > Having this description column in a table > > "Cookies, peanut butter sandwich, regular" > > > When using this WHERE clause: > > WHERE (((Food_Data.Description) Like "*Butter*" & "*Peanut*")); > > I dont get any results, however when using it this way round > > WHERE (((Food_Data.Description) Like "*Peanut*" & "*Butter*")); > > I get the row as expected. > > I assume that the query looks for them in order. The query looks for a string that matches the pattern "*Peanut**Butter*", so obviously it's not going to match "Butter Peanut". As suggested by Harald Albrech this works: WHERE (Food_Data.Description Like "*Butter*" or Food_Data..Description Like "*Peanut...

How to call 'FINDFIRST' and 'FINDNEXT'
I can't utilize this functions. Thanks On Mar 8, 8:11 am, "PCordonet" <pcordo...@central.aplitec.com> wrote: > I can't utilize this functions. These functions are not part of Clipper, and not part of xHarbour. You have many replies to the other thread you started with this same subject. What do you think they are supposed to do? David A. Smith On 8 mar, 18:25, "dlzc" <d...@cox.net> wrote: > On Mar 8, 8:11 am, "PCordonet" <pcordo...@central.aplitec.com> wrote: > > > I can't utilize this functions. > > These functions are not part of Clipper, and not part of xHarbour. > You have many replies to the other thread you started with this same > subject. > > What do you think they are supposed to do? > > David A. Smith Have anyone a function in 'C' to call these functions ? I want to call these functions from harbour. In Clipper i have funcky 2.5 library Sorry for my bad lenguage. Thanks. On Mar 9, 9:56 am, "PCordonet" <pcordo...@central.aplitec.com> wrote: > On 8 mar, 18:25, "dlzc" <d...@cox.net> wrote: > > > On Mar 8, 8:11 am, "PCordonet" <pcordo...@central.aplitec.com> wrote: > > > > I can't utilize this functions. > > > These functions are not part of Clipper, and not part > > of xHarbour. You have many replies to the other thread > > you started with this same s...

Return value of 'each', 'current', 'next', 'end'
These array functions: 'each', 'current', 'next', 'end' They return a reference or a value. let's say I want to modify the last value of an array without iterating through all of them. I would do: <? end($array) ; current($array)="new value" ; ?> is that posible?? Thanks. Hermann.Richter@gmail.com wrote: > These array functions: 'each', 'current', 'next', 'end' > > They return a reference or a value. They return values. > let's say I want to modify the last value of an array without iterating > through all of them. > > I would do: > > <? > end($array) ; > current($array)="new value" ; > ?> > > is that posible?? Try end($array); $array[key($array)] = "new value"; Chung Leong wrote: > Hermann.Richter@gmail.com wrote: > > These array functions: 'each', 'current', 'next', 'end' > > > > They return a reference or a value. > > They return values. > > > let's say I want to modify the last value of an array without iterating > > through all of them. > > > > I would do: > > > > <? > > end($array) ; > > current($array)="new value" ; > > ?> > > > > is that posible?? > > Try > > end($array); > $array[key($array)] = "new value"; $array[(sizeof($array...

'icfb' versus 'seultra'/'sedsm'
The executable for Silicon Ensemble used to be 'seultra' or 'sedsm'. Now there is 'icfb' with a recent version of Cadence I am dealing with. Are the formers embedded within icfb? I cannot get Silicon Ensemble up running alone. Any hint/help? hamidrezah@yahoo.com wrote: > The executable for Silicon Ensemble used to be 'seultra' or 'sedsm'. > Now there is 'icfb' with a recent version of Cadence I am dealing with. > Are the formers embedded within icfb? I cannot get Silicon Ensemble up > running alone. The "icfb" executable does not contain the "seultra" or "sedsm" tool suite. Specifically, the executable "icfb" (custom IC schematic capture, simulation, layout, & physical verification) does not contain "seultra" or "sedsm" (digital place & route). In future releases (e.g., Virtuoso IC61), increasingly A/d floorplanning and custom analog placement, analog synthesis, and device & block custom routing will be added to the "icfb" tool suite ... but in all cases, AFAIK, Silicon Ensemble will not itself ever be "inside" of icfb. It looks like you're missing "seultra" or "sedsm" in your path. Use the "find" command or the GNU locate command to locate the missing executables (or ask your system administrator). Hope that helps, John Gianni -- Nothing I state here is prior reviewed by my employe...

Re: '^=' and '~='? #8
32 libname erap 'T:\9SOW\AHRQ_E Rap\Data\E-RAP Data\December 2008'; NOTE: Libref ERAP was successfully assigned as follows: Engine: V9 Physical Name: T:\9SOW\AHRQ_E Rap\Data\E-RAP Data\December 2008 33 options nodate nonumber formdlim='-'; 34 /* Program: E-RAP Load XML to SAS with map v2.sas*/ 35 /************************************************************************* 36 Update path and file name below. 37 **************************************************************************/ 38 %let data_path = T:\9SOW\AHRQ_E Rap\Data\E-RAP Data\December 2008\Raw XML Data; 39 %let input_file = 035151_12232008.xml; 40 **************************************************************************; 41 42 filename xml_lib "&data_path.\&input_file."; 43 filename SXLEMAP "&data_path.\xml_map_v2.map"; 44 libname xml_lib xml xmlmap=SXLEMAP access=READONLY; NOTE: Libref XML_LIB was successfully assigned as follows: Engine: XML Physical Name: XML_LIB 45 libname erap "&data_path"; NOTE: Libref ERAP was successfully assigned as follows: Engine: V9 Physical Name: T:\9SOW\AHRQ_E Rap\Data\E-RAP Data\December 2008\Raw XML Data 46 * Read XML file into SAS data set; 47 data erap.Sabino; 48 set xml_lib.E_rap_episode_record; 49 run; ERROR: There is an illegal character in the entity name. encountered during XMLInput pa...

Re: '^=' and '~='? #9
On Thu, 12 Feb 2009 08:58:21 -0600, Joe Matise <snoopy369@GMAIL.COM> wrote: >Yeah, <> works in PROC SQL, wasn't sure about elsewhere... thanks for >confirmation! Didn't know about the MAX operator, that's interesting. .... hi, In proc SQL, I do get a note saying that: NOTE: The "<>" operator is interpreted as "not equals". In general, i find that we have different sas expressions, mostly identical one another. Still, there remain definite differences among all of these expressions: (1) data step expressions (2) where statement expressions (3) sql-expressions used in proc sql (4) macro expressions this is a less than ideal situation :-) but this may be an inevitable consequence of sas' being around for a long time. cheers, chang ...

Re: '^=' and '~='? #5
Sorry, I posted under the wrong subject. My friend asked me to post this, she got an error message in processing the XML file. I don't have much experience in working with XML file. Any help is appreciated! On Thu, Feb 12, 2009 at 10:29 AM, Akshaya Nathilvar < akshaya.nathilvar@gmail.com> wrote: > 32 libname erap 'T:\9SOW\AHRQ_E Rap\Data\E-RAP Data\December 2008'; > NOTE: Libref ERAP was successfully assigned as follows: > Engine: V9 > Physical Name: T:\9SOW\AHRQ_E Rap\Data\E-RAP Data\December 2008 > 33 options nodate nonumber formdlim='-'; > 34 /* Program: E-RAP Load XML to SAS with map v2.sas*/ > 35 > /************************************************************************* > 36 Update path and file name below. > 37 > **************************************************************************/ > 38 %let data_path = T:\9SOW\AHRQ_E Rap\Data\E-RAP Data\December > 2008\Raw XML Data; > 39 %let input_file = 035151_12232008.xml; > 40 > **************************************************************************; > 41 > 42 filename xml_lib "&data_path.\&input_file."; > 43 filename SXLEMAP "&data_path.\xml_map_v2.map"; > 44 libname xml_lib xml xmlmap=SXLEMAP access=READONLY; > NOTE: Libref XML_LIB was successfully assigned as follows: > Engine: XML > Physical Name: XML_LIB &g...

Re: '^=' and '~='? #2
No difference that I know of ... SAS has all sorts of things you can use as operators. LT,< LE,<= ne, ^=, ~=, <> in some contexts at least eq, = <<< these actually DO have a difference or two, particularly as relates to assignment I don't recall where the full list is, but http://support.sas.com/onlinedoc/913/getDoc/en/lrdict.hlp/a000202951.htm#a000290128has the list of them usable in WHERE statements (which, IIRC, is slightly greater than that of normal code, as it allows for SQL syntax in ways the rest of SAS does not). -Joe On Wed, Feb 11, 2009 at 4:52 PM, Duck-Hye Yang <dyang@chapinhall.org> wrote: > Hello, > What is the difference between '^=' and '~='? > > Thanks, > Duckhye > ...

'image' and 'imagesc'
Why is it, that 'image' and 'imagesc' change the y - direction of my data? Or an even more important question, how do I prevent them from doing so? This is the command I use: imagesc(x_vec,y_vec,rez_fld); with: x_vec = 3:0.5:7.5 y_vec = 1:-0.5:-1 rez_fld = size(x_vec) x size(y_vec) greetz, kai Kai: <SNIP wants it upside down... > Why is it, that 'image' and 'imagesc' change the y - > direction of my data... because: that's how you typically look at pics - top/left to bottom/right % now, img=load('clown'); imagesc(img.X); axis image; % -or- % axis ij; disp('change y'); pause; axis xy; % -or- % set(gca,'ydir','normal'); % then disp('get it all right...') pause; imagesc(flipud(img.X)); axis image; axis xy; % for more information help axis; us ...

Re: '^=' and '~='? #7
SAS was originally based on PL/1, and having programmed in PL/1,=20 I'm inclined to use the PL/1 symbol for not equals, which is the ^=3D (actually it is not the caret on IBM mainframes, but the not symbol which looks like L on its side). =20 -Mary ----- Original Message -----=20 From: ./ ADD NAME=3DData _null_;=20 To: SAS-L@LISTSERV.UGA.EDU=20 Sent: Thursday, February 12, 2009 9:09 AM Subject: Re: '^=3D' and '~=3D'? Maybe good reason to use mnemonic equivalents. 882 data _null_; 883 a =3D .v MIN .z; 884 b =3D .v MAX .z; 885 ax =3D .v >< .z; 886 bx =3D .v <> .z; NOTE: The "<>" operator is interpreted as "MAX". 887 c =3D .A NE .A; 888 put (_all_)(=3D);; 889 run; a=3DV b=3DZ ax=3DV bx=3DZ c=3D0 ...

Are there the functions 'leEdgeSetLayer' and 'leEdgeAddAll' in skill?
I found the two functions in one skill scripts, but mayn't find them in documents, even searched out any info with google. Are they exist? If they're old functions, how to find the replaced ones? Thanks for your help! B.R. Joffre On Jun 20, 10:50 pm, "tech11" <tec...@sohu.com> wrote: > I found the two functions in one skill scripts, but mayn't find them in > documents, even searched out any info with google. Are they exist? If > they're old functions, how to find the replaced ones? Thanks for your help! In less time than it took for me to respond to this question, anyone can find out the current status of any of the more than 50,000 SKILL functions with a single click (including exactly which releases your functions of interest exist in, whether they are documented & supported, and if they've been changed or deleted between releases, and if so, what the arguments are and how to recover from the changes or deletions, etc.). 1. Bring up the two-part SKILL Survey (CIW: Tools -> SKILL -> Survey) 2. Point to your IL files to create a comprehensive INVENTORY of all functions called & defined & where located 3. Enter your email address to receive an automated multi-part detailed analysis by return email Information you'd find in that survey result would include, for example, are that leEdgeSetLayer & leEdgeAddAll are both private (undocumented & unsupported) SKILL functions; available in all releas...

Any difference between 'New' and 'CreateObject' in automation?
Is there any difference between 'New' and 'CreateObject' in automation? As in..... Dim xlobj as Excel.application Set xlobj = New Excel.Application or Set xlobj = Createobject("Excel.application") I understand that create object is normally used in late binding but that is not what I'm interested in. In early binding does it matter which is used? Pete They are different. A google search on the term CreateObject vs New brings up a whole slew of hits. Essentially though, you only really need to worry about the difference if you are coding for MTS (or COM+) applications. -- Terry Kreft MVP Microsoft Access "Peter" <rusty@127.0.0.1> wrote in message news:LsCdnXR87LkZ5RnfRVnyjQ@pipex.net... > Is there any difference between 'New' and 'CreateObject' in automation? > As in..... > > Dim xlobj as Excel.application > Set xlobj = New Excel.Application > or > Set xlobj = Createobject("Excel.application") > > I understand that create object is normally used in late binding but that is > not what I'm interested in. > In early binding does it matter which is used? > > Pete > > > What a good idea....... > A google search on the term > CreateObject vs New > brings up a whole slew of hits. but it is Friday and my brain is trying to switch off. I see what you mean now that I've looked. Thanks Pete ...

problem with 'include' and 'file_exists' function
i encountered this problem: "include('inc.php')" will work problely but "include('./inc.php') doesn't work .. both file_exists('inc.php') or file_exists('./inc.php') didn't return the right value.this always show "file doesn't exists' my environment is win2003+iis+php5 how to fix it ? sorry to my English thanks to you. :) > "include('inc.php')" will work problely >but "include('./inc.php') doesn't work .. There are plenty of situations where this will happen. If a file name begins with ./, it will be looked up with include_path relative only to the current working directory, not the current script. Are you SURE you know what the current working directory is when the script is started? >both file_exists('inc.php') or file_exists('./inc.php') didn't return >the right value.this always show "file doesn't exists' include() uses include_path to search for files. file_exists() doesn't. >my environment is win2003+iis+php5 > >how to fix it ? The fix may be to correct the "right" value. Don't think that! "Gordon Burditt =D0=B4=B5=C0=A3=BA " thanks for your answer. > > There are plenty of situations where this will happen. If a file > name begins with ./, it will be looked up with include_path relative > only to the current working directory, not the current script. >...

Formating numbers: I want '9' to be '009' and '19' to be '019'
How can I do this ? This is the number used in invoice. Thanks. formatInvoiceNo: Format([InvoiceNo],"000000000") Open the report (form?) in design view, and set the Format property of this text box to: 000 -- Allen Browne - Microsoft MVP. Perth, Western Australia. Tips for Access users - http://allenbrowne.com/tips.html Reply to group, rather than allenbrowne at mvps dot org. "swingingming" <ming.mge@gmail.com> wrote in message news:1123566670.327279.83700@f14g2000cwb.googlegroups.com... > How can I do this ? This is the number used in invoice. > Thanks. Thanks. I will stay with your solution. It works fine. Because the invoice number actually consists of other Texts. ...

(patch for Bash) 'vcat', 'vset', 'vfile'
These 3 builtin commands are designed to "dump" and "reload" shell variables to/from file, without going through another layer of interpretation or parsing. In addition to reading/writing simple string for ordinary shell variable, the commands can handle positional parameters and array variables (both index and values). vcat [-0A] [name] > file Writes a shell variable NAME to stdout (inverse of 'vset'). If NAME is missing, then positional parameters are printed. Each value of array elements and positional parameters is terminated by '\0', whereas ordinary shell variable is not \0-terminated unless option -0 is given. By default, only the array values are printed, but option -A will print the array index as well. vset [-0A] [name] < file Assigns a shell variable NAME from stdin (inverse of 'vcat'). If NAME is missing, then positional parameters are set. If input data contains '\0', then it is considered array, and NAME will be converted to array variable. By default, only array values are set, but option -A will set the array index as well. If there is only one string with trailing '\0', then option -0 will set it to regular shell variable. vfile -[rw] [-d dir] [-0A] name... Read (-r) or write (-w) shell variables from/to files of the same name. Internally, it uses 'vcat' and 'vset', so full array content is preserved. vcat [-0A] name > name vset [...

Scilab's 'optim' and 'splin'
I've got this really cool application that makes a smoothed line using splines, then fits it to a source line using a nonlinear weighting. I'm currently using SciLab with it's 'optim' and 'splin' function to do this, but now I need to write some embeddable C++ code. The 'splin' function is obvious -- it generates a spline from a number of inflection points. The 'optim' function as I am using it uses a quasi-Newton method, which is working just fine for me. Before I go and write this stuff up by hand, does anyone have any suggestions on where I can find example code to do this? I'm mostly concerned with the optimization -- I'd like to get my hands on something where some one else has already fallen into the pitfalls. TIA. -- Tim Wescott Wescott Design Services http://www.wescottdesign.com Posting from Google? See http://cfaj.freeshell.org/google/ "Applied Control Theory for Embedded Systems" came out in April. See details at http://www.wescottdesign.com/actfes/actfes.html Just a remark : there is a lsq_splin function which try to fit a splin to discrete points (with various weight if needed). May be it can help you at least to find a good starting point for your optimization ? hth Bruno Tim Wescott wrote: > I've got this really cool application that makes a smoothed line using > splines, then fits it to a source line using a nonlinear weighting. Is it important that you u...

s=load('C:\Users\Lubna\matlab\2_1.wav', '-ascii')
when im trying to load a .wav file as ascii, im getting following error , can anybody resolve it??????? s=load('C:\Users\Lubna\matlab\2_1.wav', '-ascii') ??? Error using ==> load Unknown text on line number 1 of ASCII file C:\Users\Lubna\matlab\2_1.wav "RIFFX". "ABC " <looma.amir.ali@gmail.com> wrote in message <jn3vqv$edk$1@newscl01ah.mathworks.com>... > when im trying to load a .wav file as ascii, im getting following error , can anybody resolve it??????? > s=load('C:\Users\Lubna\matlab\2_1.wav', '-ascii') > ??? Error using ==> load > Unknown text on line number 1 of ASCII file C:\Users\Lubna\matlab\2_1.wav > "RIFFX". > Did this start out as a sound file that has been saved to ascii format with the extension .wav? If it's a binary file, why are you not using wavread to read it? Barry On Apr 23, 12:26=A0pm, "ABC " <looma.amir....@gmail.com> wrote: > when im trying to load a .wav file as ascii, im getting following error ,= can anybody resolve it??????? > =A0s=3Dload('C:\Users\Lubna\matlab\2_1.wav', '-ascii') > ??? Error using =3D=3D> load > Unknown text on line number 1 of ASCII file C:\Users\Lubna\matlab\2_1.wav > "RIFFX ". ---------------------------------------------------------------------------= ------------------------------------- Why do you want to do that? Why not just read in the numbe...

''Get free calling cards now ''
''Get free calling cards now '' Hi Friends, I found a great site to call anywhere in the World for free! What we have to do is just signup and earn freecalling cards. After signingup with Globalfreecalling you can findout lot of very simple and easy offers (Just Contact Information Required).Some Offers may Required only E-Mail and Zip Code Only. Just complete the Offers and get Free calling Cards. signup with below link:: http://ww3.6URL.com/0P8U Hurry Up Friends ! ...

Web resources about - calling '!' or 'system' in matlab different than same functions from shell - comp.soft-sys.matlab

Resources last updated: 3/30/2016 12:56:26 PM