f



Error: libgpc.so: cannot open shared object file: No such file or directory.

I usually compile m-files using deploytool and launch it on a grid server. However, at this time, I've got a weird error which is annoying me for several days. The code works fine and gives desired results when it is launched on the Matlab console as an m-file. But, if I try to launch it on the grid server after compiling, it provides the following error message (I tried uninstalling and reinstalling MCR 7.14 several times, but it didn't help):

-----------------
??? Invalid MEX-file
'/home/wnam/.mcrCache7.14/CoMP_I1/toolbox/map/map/private/gpcmex.mexa64':
libgpc.so: cannot open shared object file: No such file or directory.

Error in ==> polybool>polygonSetOperation at 162

Error in ==> polybool at 138

Error in ==> CoMP_IAC at 193

Invalid MEX-file '/home/wnam/.mcrCache7.14/CoMP_I1/toolbox/map/map/private/gpcmex.mexa64': libgpc.so: cannot open shared object file: No such file or directory.
MATLAB:invalidMEXFile
-----------------

Is there any good solution?
0
9/21/2012 4:12:16 AM
comp.soft-sys.matlab 211266 articles. 23 followers. lunamoonmoon (257) is leader. Post Follow

1 Replies
1111 Views

Similar Articles

[PageSpeed] 42

After a period of struggling, I found a simple workaround. After I copied 'libgpc.so' from matlabroot/bin/glnxa64 and put it in the same directory as the compiled file, I haven't got any error. However, this is an ad hoc solution and I still want to know if there is a permanent solution.

"Wooseok " <nam.wooseok@gmail.com> wrote in message <k3gpev$efc$1@newscl01ah.mathworks.com>...
> I usually compile m-files using deploytool and launch it on a grid server. However, at this time, I've got a weird error which is annoying me for several days. The code works fine and gives desired results when it is launched on the Matlab console as an m-file. But, if I try to launch it on the grid server after compiling, it provides the following error message (I tried uninstalling and reinstalling MCR 7.14 several times, but it didn't help):
> 
> -----------------
> ??? Invalid MEX-file
> '/home/wnam/.mcrCache7.14/CoMP_I1/toolbox/map/map/private/gpcmex.mexa64':
> libgpc.so: cannot open shared object file: No such file or directory.
> 
> Error in ==> polybool>polygonSetOperation at 162
> 
> Error in ==> polybool at 138
> 
> Error in ==> CoMP_IAC at 193
> 
> Invalid MEX-file '/home/wnam/.mcrCache7.14/CoMP_I1/toolbox/map/map/private/gpcmex.mexa64': libgpc.so: cannot open shared object file: No such file or directory.
> MATLAB:invalidMEXFile
> -----------------
> 
> Is there any good solution?
0
9/21/2012 7:01:15 PM
Reply:

Similar Artilces:

sendmail: error while loading shared libraries: libdb-4.1.so: cannot open shared object file: No such file or directory
Hi, when trying to start sendmail, I get sendmail: error while loading shared libraries: libdb-4.1.so: cannot open shared object file: No such file or directory The file is there where it belongs in /usr/local/BerkeleyDB.4.1/lib/, what do I need to do? Thanks and cheers, Konrad In article <412ba7a7$1@news.ginko.net>, Konrad Mathieu <kombi@removethis.ru> wrote: >Hi, >when trying to start sendmail, I get > >sendmail: error while loading shared libraries: libdb-4.1.so: cannot open >shared object file: No such file or directory > >The file is there where it b...

jbuilder: error while loading shared libraries: libstdc++-libc6.2-2.so.3: cannot open shared object file: No such file or directory
I got this error when I tried to start Borland JBuilder X Foundation: jbuilder: error while loading shared libraries: libstdc++-libc6.2-2.so.3: cannot open shared object file: No such file or directory What is libstdc++-libc6.2-2.so.3? Where can I get it? On Thu, 08 Jan 2004 21:45:15 -0800, Neo wrote: > What is libstdc++-libc6.2-2.so.3? A compatability library. > Where can I get it? Google. If you want a more specific answer, at least you have to tell us which distro you're using. Sybren -- (o_ Q: God, root, what is difference? //\ A: God can change the byte order on the CPU, root can't. V_/_ ...

gdm[####]: (null): cannot open shared object file: No such file or directory
I'm stumped by this gdm error/warning message in /var/log/messages. It doesn't specify what library is missing. However, I'm able to login to the desktop without any problems. I thought if I updated the gdm rpm the message would disappear but it did not. I've searched many a website and forum without finding a specific answer to this problem. The other strange thing I see is that gdm has two processes running once I enter the desktop. Maybe this could be the cause, I don't know, just a guess. How can I eliminate this second gdm process at startup? What coul...

iMPACT: "...cannot open shared object file: No such file or directory"
Hi there, I'm trying to run Xilinx iMPACT under slackware. Why can't it find a shared library that's in the executable's directory? root@Valine:/opt/Xilinx/bin/lin# impact impact: error while loading shared libraries: libImpactProcessor.so: cannot open shared object file: No such file or directory root@Valine:/opt/Xilinx/bin/lin# ls libImpactProcessor.so libImpactProcessor.so* root@Valine:/opt/Xilinx/bin/lin# root@Valine:~# echo $XILINX /opt/Xilinx root@Valine:~# echo $PATH /usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin: /usr/games:/opt/www/htdig...

Can't do "gem update --system"
Hi, I've update the software on my linux box ( v4 to v5.0 http://clarkconnect.com/ ) upgrade something has gone screwy with my Ruby installation on the machine. Any ideas? My ruby/rails installation was working fine until I did the Linux update. Gem Update Affected (not that the 'md5.so' is actually there in the directory) [root@home ~]# gem --version 1.3.1 [root@home ~]# ruby --version ruby 1.8.7 (2008-08-11 patchlevel 72) [i686-linux] [root@home ~]# [root@home ~]# gem update --system /usr/local/lib/ruby/1.8/i686-linux/digest/md5.so: libcrypto.so.4: cannot open shared object ...

Undefined error #612
I got this message when i did a nonlinear regression. I am using SPSS 13.0 Undefined error #612 - Cannot open text file "C:\Program Files\SPSS\en\windows\spss.err": No such file or directory=AC Predicted values are missing, or case weights are missing or not positive for all cases. This command is not executed. What is wrong with the SPSS? I have no problem at all when i use version 12.0 Thank you, run - I have not seen anyone respond to this one - Here is a comment, even though it is not very useful. On 22 Mar 2005 18:56:27 -0800, "run" <run@hawaii.edu> wrote: > > I got this message when i did a nonlinear regression. I am using SPSS > 13.0 > > Undefined error #612 - Cannot open text file "C:\Program > Files\SPSS\en\windows\spss.err": No such file or directory� 1) That's a funny character at the end of 'directory', which reads as "=AC" or else as a special character. 2) That text file message seems to point to a message-file that should be there at installation; so it *seems* to signify that the installation went wrong, or disk contents have been altered since the time of installation. Combining those two things with my long experience at pondering error messages -- I wonder whether SPSS could be totally screwed up at this stage, so that the next line about "Predicted values ... weights" may have little to do with anythi...

File share, File Sharing, File Host
http://fileuplo.de File share, File Sharing, File Host -- questo articolo e` stato inviato via web dal servizio gratuito http://www.newsland.it/news segnala gli abusi ad abuse@newsland.it ...

Error with Open file file
Hello, I have some problem while open file with spaces. Please advice me how to correct it. My Script: if {$filename eq {}} { set filename "[tk_getOpenFile -multiple 1 -filetypes $::pref (openTypeText)]" if { $filename eq {} } return ;# Cancel } set InputFile [open "$filename" r] Error generated by TCL: couldn't open "{D:/TroubleTicket/May/NA04500996-CallCompletionRatio/ InitialSymptoms/MSS16 090422/MSS16 090422.txt}": no such file or directory couldn't open "{D:/TroubleTicket/May/NA04500996-CallCompletionRatio/ InitialSymptoms/MSS16 09042...

Error 1 with Open File+.vi:Open File
Hallo ... ich arbeite mit LabVIEW 7 und habe ein Problem mit der Funktion "Datei �ffen". In einem umfangreichen Messprogramm lese ich zu Beginn mit Hilfe eines entwickelten VI Daten aus einer Datei. Wenn ich zu einem sp�teren Zeitpunkt nochmals Daten einlesen m�chte hat das VI das eben noch einwandfrei funktionierte Problem mit der Funktion "Datei �ffnen". Fehlermeldung: Fehler 1 ist bei Open File+.vi:Open File aufgetreten M�gliche Gr�nde: LabVIEW: Ein Ausgabeparameter ist ung�ltig. --- NI-488: Befehl erfordert, da� der GPIB-Regler der aktive Regler ist. Kann mir j...

After write TDMS file, I close the storage ref (file), then I delete the file in program, error occured:File already open. How to solve it?
I want to delete channel groups in TDMS file, but the delete storage VI doesn't work, so I need to copy the needed datas to another file, and then delete the orignal file. The error occured&nbsp; when I deleted the orignal file, the prompt was: File already open. But I examined my program and I had used the colse storage VI to close the storage ref(file), the ref closed&nbsp;was&nbsp;equal to the ref open. How to solve it? &nbsp; Thanks for your reply! Untitled 1.vi: http://forums.ni.com/attachments/ni/170/266602/1/Untitled 1.vi The file connections are refcounted, so it...

files, directories, files, directories
Hi folks, I've been trying to make a decision and it's driving me crazy. Is a directory a file or is a directory NOT a file but a node? Should I have A) public interface IFile { IFileName FileName; IContent GetContent(); } public interface IDirectory extends IFile { } or B) public interface INode { INodeName NodeName; } public interface IFile extends INode { IContent GetContent(); } public interface IDirectory extends INode { } Method A is nice cause IFile becomes the base "Node" type and you can use names like "IFileName" which sound...

File::open and File.open
What exactly is the difference between these? :: is a class method while is an instance method??? If that is so, could someone clarify this with more detail? I use File.open, but File::open works too. However sometimes, this is not the case which adds to my confusion :) For example, I can only do Digest::MD5.new() and not Digest.MD5.new() why is that? I don't fully understand OO programming... perhaps this is my problem. Thank you for your time. -- Posted via http://www.ruby-forum.com/. Robert Klemme schrieb: > Brad Tilley wrote: >> What exactly is the difference betwe...

Error: libmwmclmcrrt.so.7.3: cannot open shared object file:
Hello! I am trying to execute an executable file in Matlab (Linux). I get the following error: error while loading shared libraries: libmwmclmcrrt.so.7.3: cannot open shared object file: No such file or directory I noticed a similar error in the message board and followed the solution. I added the following commands to the cshrc file: setenv matlabroot /usr/local/matlab73/ setenv LD_LIBRARY_PATH /usr/local/matlab73/sys/os/glnxa64:/usr/local/matlab73/bin/glnxa64:/usr/local/matlab73/sys/java/jre/glnxa64/jre1.5.0/lib/i386/native_threads:/usr/local/matlab73/sys/java/jre/glnxa64/jre1.5.0/lib/i3...

error 6 at open file+, generic file i/o error
a customer of our system got a generic file i/o error when being in a screen where on the one side data was written in spreadsheet file (every 3 seconds) and on the other side in steps of 5 seconds the file was shown (read) on a graph. Don't know if this had something to do with the error, but he got "error 6 at open file+, generic file i/o error". Can the cause be an easy mistake in a file name ? because I can't reproduce it on my system and the error seemed to appear once in a few days. On Hard disk space should be more than 5 gb left. I would first capture the path and fi...

why two file open operations when opening a file on a server share?
Hello, I am curious about the following protocol trace between an NT client and XP pro server: I open a word doc on the server's shared folder using MS Word on the NT client. Sniffing with ethereal, I see (each message simplified for brevity): client-> NT_CREATE_ANDX_REQUEST Path, MyFile.doc server-> NT_CREATE_ANDX_RESPONSE Fid: 0x000F client-> CLOSE_REQUEST 0x000F server-> CLOSE_RESPONSE client-> TRANS2_REQ MyFile.doc server-> TRANS2_RESPONSE MyFile.doc client-> NT_CREATE_ANDX_REQUEST Path, MyFile.doc server-> NT_CREATE_ANDX_RESPONSE Fid: 0x400...

Fatal error C1083: Cannot open include file 'afxsock.h': No such file or directory
Hi there, I am porting my windows project from my desktop and my laptop. At my desktop, I can compile and run my project/application without any problem, while at my laptop, I got the following compilation error: Fatal error C1083: Cannot open include file 'afxsock.h': No such file or directory Visual C++ 2008 Express Edition is used for both cases. The two computers have virtually the same settings: My desktop runs Windows Vista Home Premium (2007), SP2 My laptop runs Windows Vista Ultimate (2007), SP2 Any idea for the fatal error? Thank you! --- news://fr...

: fatal error C1083: Cannot open include file: 'simstruc.h': No such file or directory
Dear All I am trying to import AMESim model in Simulink as S Function. But doing so, I am getting the following error: AMEcompile110.bat does a 64 bit setup Setting environment for using Microsoft Visual Studio 2008 Beta2 x64 tools. Setting environment for using Microsoft Visual Studio 2008 Beta2 x64 tools. Microsoft (R) Program Maintenance Utility Version 9.00.21022.08 Copyright (C) Microsoft Corporation. All rights reserved. cl.exe -c -DWIN32 -DAMESIMULINK -I"C:\Programs\MATLAB/extern/include" -I"C:\Programs\MATLAB/simulink/include" -I"C:\AMESim\v1110/interfaces/simulink" -I"C:\AMESim\v1110/interfaces" -I"C:\AMESim\v1110\lib" -nologo -DWIN32 -MT -W3 -Od -D "_MBCS" -EHsc -wd4996 -o AMESimulinkStandardInterface_.obj AMESimulinkStandardInterface_.c cl : Command line warning D9035 : option 'o' has been deprecated and will be removed in a future release AMESimulinkStandardInterface_.c AMESimulinkStandardInterface_.c(791) : fatal error C1083: Cannot open include file: 'simstruc.h': No such file or directory NMAKE : fatal error U1077: '"C:\Program Files (x86)\Microsoft Visual Studio 9.0\VC\BIN\amd64\cl.exe"' : return code '0x2' Stop. System build error Please help me. Thanks in advance! Chaitanya ...

fatal error C1083: Cannot open include file: 'hidsdi.h': No such file or directory
I have copied somebodies code into my program, edited it and such so that I can try and read any device connected to the computer via usb, find if it has a generic or advanced driver and then load the driver for the input device. All in all its so that a usb device such as a joystick or 'other' can control an external piece of hardware. I'm getting the above error. I have tried an awful lot of things to resolve it. Please throw me suggestions, so that I can try them all out! Thanks! Code: #include <hidsdi.h> Solution one: Added the DDK folder to Project Properties->Linker->Input->Additional Dependencies Solution two: a) Added the hidsdi.h into the project folder, no avail. b) Added the hidsdi.h into the project base folder, nothing again. Solution three: Added dependencies in Tools->Options->Projects->VC++ Directories->> All tabs nd.wass@gmail.com wrote: >I have copied somebodies code into my program, edited it and such so >that I can try and read any device connected to the computer via usb, >find if it has a generic or advanced driver and then load the driver >for the input device. All in all its so that a usb device such as a >joystick or 'other' can control an external piece of hardware. > >I'm getting the above error. I have tried an awful lot of things to >resolve it. Please throw me suggestions, so that I can try them all >out! Thanks! > >Co...

fatal error C1083: Cannot open include file: 'simstruc.h': No such file or directory
Hi I am new to Matlab and I am trying to mex .c files for the ADM1 model. I have the 64bit program and installed the Visio compiler. I did the mex -setup successfully but when I try to mex the .c files I get the following error message: >> mex adm1_DAE1.c adm1_DAE1.c adm1_DAE1.c(19) : fatal error C1083: Cannot open include file: 'simstruc.h': No such file or directory C:\PROGRA~1\MATLAB\R2010B\BIN\MEX.PL: Error: Compile of 'adm1_DAE1.c' failed. ??? Error using ==> mex at 208 Unable to complete successfully. Anyone have any ideas what the pro...

fatal error C1083: Cannot open include file: 'ace/config-all.h': No such file or directory
ACE VERSION: 5.4.8 - HOST MACHINE and OPERATING SYSTEM: Windows XP Pro. Unknown version of winsock. - TARGET MACHINE and OPERATING SYSTEM, Windows XP Pro. - COMPILER NAME AND VERSION (AND PATCHLEVEL): MSVC++ 7.1. CONTENTS OF $ACE_ROOT/ace/config.h: $ACE_ROOT/ace/config.h has been created and it has the include file of conifg-win32.h. AREA/CLASS/EXAMPLE AFFECTED: The file "config-all.h" doesn't compile. The line #include "ace/config.h" Generates the error message: .../ace/config-all.h(19) : fatal error C1083: Cannot open include file: 'ace/config.h': No such file or directory DOES THE PROBLEM AFFECT: COMPILATION? yes LINKING? no EXECUTION? yes OTHER (please specify)? SYNOPSIS: I have built and installed ACE + TAO and I have used the examples and they are working fine. I have created directory of the ACE_ROOT and I'm trying to Build my workspace, the idl compile fine but when I compile the all project it gives me the error mentioned above that it cant open the ace/config-all.h. I have add all the envornmenet variables that mentioned in the ACE-INSTALL to my system. I dont know what else I need to do? I would really appreicate it if someone can help me out here. With all respect, I'm new to this and I need to learn. Thank you all. Samer S. Issa Hi Samer, Have you added $ACE_...

Error Installing 'termios' [ld: fatal: file crt1.o: open failed: No such file or directory]
I would greately appreciate any insite that can be provided: gem install termios Attempting local installation of 'termios' Local gem file not found: termios*.gem Attempting remote installation of 'termios' Building native extensions. This could take a while... /apps/ruby/lib/ruby/site_ruby/1.8/rubygems/installer.rb:290: warning: Insecure world writable dir /apps/ruby, mode 040777 /apps/ruby/lib/ruby/site_ruby/1.8/rubygems/installer.rb:301: warning: Insecure world writable dir /apps/ruby, mode 040777 ld: fatal: file crt1.o: open failed: No such file or directory collect2: ld...

error 7 open file+.vi when opening multiple csv files
&nbsp; &nbsp; <img style="WIDTH: 543px; HEIGHT: 385px" height="320 src= http://i67.photobucket.com/albums/h299/ghtokyo/csv_loop.jpg" width="456"> Hi, I it was interesting (and frustrating) that I, intermitantly, got the open file error #7 when I was sitting in a loop opening csv files using ReadFromSpreadsheet file.vi.&nbsp; The ReadFromSpreadsheetFile.vi is a higher level vi which should open the file, read the number of specified lines,&nbsp;then close the file afterwards.&nbsp; IT reads the csv files correctly for one iteration of the...

opening file
Hello, This really drives me nuts. Im opening an input file, and Im testing if it was open successfully. Thats it! I know that the file that Im trying to open DOES NOT exist but Im getting NO error message. No matter what name I enter I get 'file opened successfully" Any clues? Thanks! #include <iostream.h> #include <stdlib.h> #include <stdio.h> #include <fstream.h> int main() { ifstream infile; char file_name[16]; printf("\nEnter file name: "); cin>>file_name; infile.open(file_name); if (infile.fail()) ...

[ace-users] Re: fatal error C1083: Cannot open include file: 'ace/config-all.h': No such file or directory
Hi, Make sure you set ACE_ROOT to the location of ACE (for example c:\ace\ace_wrappers) and then restart the IDE, the IDE caches all environment variables after being started. Regards, Johnny Willemsen Remedy IT Postbus 101 2650 AC Berkel en Rodenrijs The Netherlands www.theaceorb.nl / www.remedy.nl "Samer S. Issa" <issa.samer@gmail.com> wrote in message news:<1138270579.069801.255530@z14g2000cwz.googlegroups.com>... > ACE VERSION: 5.4.8 > > - HOST MACHINE and OPERATING SYSTEM: > Windows XP Pro. Unknown version of winsock. > > - TARGET MACHINE and OPERATING SYSTEM, > Windows XP Pro. > - COMPILER NAME AND VERSION (AND PATCHLEVEL): > MSVC++ 7.1. > > CONTENTS OF $ACE_ROOT/ace/config.h: > $ACE_ROOT/ace/config.h has been created and it has the include > file of conifg-win32.h. > > AREA/CLASS/EXAMPLE AFFECTED: > The file "config-all.h" doesn't compile. The line > > #include "ace/config.h" > > Generates the error message: > > ../ace/config-all.h(19) : fatal error C1083: Cannot open include file: > 'ace/config.h': No such file or directory > > DOES THE PROBLEM AFFECT: > COMPILATION? yes > LINKING? no > EXECUTION? yes > OTHER (please specify)? > > SYNOPSIS: > I have bui...

Web resources about - Error: libgpc.so: cannot open shared object file: No such file or directory. - comp.soft-sys.matlab

Wikipedia:Quick directory - Wikipedia, the free encyclopedia
This page is a handy directory to various locations of interest in Wikipedia. Only dynamic pages should be listed here, no policy pages etc. ...

Wikipedia:WikiProject Council/Directory - Wikipedia, the free encyclopedia
Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc. , a non-profit organization.

Business Directory Listings: Eight Smart Tips for You to Get Started
If you are considering a business directory listing for your small business, congratulations – you are on the right track. Local SEO, local customers, ...

Atlas Partner Directory Launched
... just for Facebook and Instagram –advertising platform Atlas has one, as well. On that note, Atlas Tuesday introduced the Atlas Partner Directory ...

Slack announces App Directory store
... create more apps for the store, and a new framework called Botkit which should simplify the process of creating apps. The Slack App Directory, ...

Amazon brings Microsoft users into AWS with Active Directory service
Amazon has launched an AWS Directory Service for Active Directory , a fully managed implementation of Microsoft's authentication and user management ...

Security Recruiter Directory
To find the right security job or hire the right candidate, you first need to find the right recruiter. CSO's security recruiter directory is ...

'Twitch Plays' directory makes it easy to find new games
The huge success that is TwitchPlaysPokemon gave rise to a number of other Twitch Plays games, and the video platform wants to make sure you ...

Slack's New Directory And Venture Fund Aim To Make The Service Even More Indispensable
The workgroup wunderkind is helping users find useful tools within the service—and giving startups money to create new ones. Two key facts about ...

LDAP Directory Metadata ETL
WhereHows - Data Discovery and Lineage for Big Data Ecosystem

Resources last updated: 3/11/2016 1:14:37 AM