f



Linking C++ with Matlab

Hi,

I have two sensors, a pressure sensor and a k-type thermocouple. I'm trying to read them into Matlab so that I can create a stripchart and do some analysis.  My plan is to obtain the data using a 'Measurement Computing USB-1208LS'. 

This instrument comes with some data aquisition software written in C. I'm currently trying to write a C++ project in Visual C++ 2010 Express that allows me to grab the data in Matlab, using the tutorial I downloaded from www.engineering.uiowa.edu/~dip/lecture/C++_with_Matlab.pdf as a guide, although this is for an earlier version of Visual Studio.

I got the basic structure to compile, but as soon as I tried using any of the mex functions it would no longer compile and I get the following error message

mexFunction.obj : error LNK2019: unresolved external symbol _mxCreateDoubleScalar referenced in function _mexFunction

I assume that means that it can't 'see' the mex libraries, but I can't work out why. Up until a week ago I knew nothing about c++, so I'm currently on a very steep learning curve.

Are there any obvious things I should be looking for? Would anyone be willing to look over my code and check my settings if I were to email them the project?

Many thanks
Jane
0
jterry (29)
5/9/2012 6:31:06 PM
comp.soft-sys.matlab 211266 articles. 24 followers. lunamoonmoon (257) is leader. Post Follow

1 Replies
720 Views

Similar Articles

[PageSpeed] 36

"Jane T" wrote in message <joed5a$g92$1@newscl01ah.mathworks.com>...
> Hi,
> 
> I have two sensors, a pressure sensor and a k-type thermocouple. I'm trying to read them into Matlab so that I can create a stripchart and do some analysis.  My plan is to obtain the data using a 'Measurement Computing USB-1208LS'. 
> 
> This instrument comes with some data aquisition software written in C. I'm currently trying to write a C++ project in Visual C++ 2010 Express that allows me to grab the data in Matlab, using the tutorial I downloaded from www.engineering.uiowa.edu/~dip/lecture/C++_with_Matlab.pdf as a guide, although this is for an earlier version of Visual Studio.
> 
> I got the basic structure to compile, but as soon as I tried using any of the mex functions it would no longer compile and I get the following error message
> 
> mexFunction.obj : error LNK2019: unresolved external symbol _mxCreateDoubleScalar referenced in function _mexFunction
> 
> I assume that means that it can't 'see' the mex libraries, but I can't work out why. Up until a week ago I knew nothing about c++, so I'm currently on a very steep learning curve.
> 
> Are there any obvious things I should be looking for? Would anyone be willing to look over my code and check my settings if I were to email them the project?
> 
> Many thanks
> Jane

Did you find any solution to this?
I'm also encountering something to do with "unresolved external symbol".
I would be very thanful if you can give me a tip.

-sida
0
sidazhou (15)
12/18/2012 9:34:09 PM
Reply:

Similar Artilces:

Shall i use the misrosoft Visual c++ code from a m-file generated from matlab in Visual C++ with out matlab runtime environment
undefined ...

matlab and c#
hello, can anyone tell me how to connect between matlab and c#? is it using COM? or how? and it is done in c# or matlab or both? can anybody help me pls Thanx, Victor Search for "c sharp" on the MathWorks support page. Stuart "victor hugo" <dvictor_hugo@yahoo.com> wrote in message news:eee4ca3.-1@webx.raydaftYaTP... > hello, > > can anyone tell me how to connect between matlab and c#? is it using > COM? or how? and it is done in c# or matlab or both? > > can anybody help me pls > > Thanx, > > Victor ...

US-MA-Natick: Developer, C++, C, XML, Java, MATLAB, Simulink, CAD tools; C-P (45307257608)
US-MA-Natick: Developer, C++, C, XML, Java, MATLAB, Simulink, CAD tools; C-P (45307257608) ========================================================================================== Position: Developer Reference: SMC01487 Location: Natick MA Duration: C-P Skills: 3+yrs of software engineering with strong C++, C, XML, and Java programming skills. Experience with MATLAB and Simulink. Knowledge in simulation algorithms and engineering systems. Experience with engineering simulation and CAD tools Please send your current resume in confidence to <staffing@eurosoft-inc.com> ..45307257608. ...

QR Decomp RLS
Hello, Anyone know where I might find this? Michael. Hi Michael Simon Haykins Book "Adaptive Filter Theory" comes with qrdrls matlab code on the CD. regards alain M. Wirtzfeld wrote: > Hello, > > Anyone know where I might find this? > > > Michael. > > ...

QR Decomp RLS
Hello, Anyone know where I might find this? Michael. ...

Exporting data from C++ to Matlab --> using pointers in c++ instead of...
If i have: //option 1 - it doesn't work float *nou; nou = (float *) calloc(50, sizeof(float)); //option 2 - it works float nou[15]; How can I send "nou" to Matlab if it's a pointer (option 1)??? - option 2 works with the code: I'm using this code: mxArray *TxNou = NULL; TxNou = mxCreateNumericMatrix(1, 15, mxSINGLE_CLASS, mxREAL); memcpy((void *)mxGetPr(TxNou), (void *)nou, sizeof(nou)); matlab.PutVariable("TxNou", TxNou); matlab.EvalString("plot(TxNou);"); I don't know what changes I have to do in the code - i've tried a lot of things... i don't find the error! Thanks for your advice, Oscar Oscar Esteve wrote: > If i have: > //option 1 - it doesn't work > float *nou; > nou = (float *) calloc(50, sizeof(float)); > //option 2 - it works > float nou[15]; > > How can I send "nou" to Matlab if it's a pointer (option 1)??? - > option 2 works with the code: > > I'm using this code: > mxArray *TxNou = NULL; > TxNou = mxCreateNumericMatrix(1, 15, mxSINGLE_CLASS, mxREAL); > memcpy((void *)mxGetPr(TxNou), (void *)nou, sizeof(nou)); Why not use mxGetData and avoid the cast? in option 1: sizeof(nou) = sizeof(float *) = 4 on 32 bit, 8 on 64bit. In option 2: sizeof(nou) = 15*sizeof(float) = 15*4 = 60 > matlab.PutVariable("TxNou", TxNou); > matlab.EvalString("plot(TxNou);"); > > I don'...

Matlab and C++ in LABVIEW
dear all! Plz help me out that how can i implement Matlab code in LABVIEW.i am using matlab 7.0 and LABVIEW 7.1. is there any method so that i dont have to change the Matlab code and it runs in LABVIEW. secondly can i run a C++ code in formula node exactly as it&nbsp;runs in C++ compiler thnx for ur time Manzoor manzoor, In version 7 and 7.1, LabVIEW have the "MATLAB Script Node" that allows you to run m-scripts from within LabVIEW. Since you have communication between both products, minimal change (if any) is necessary, but you have to have both produts installed on the same machine for this interface to work. In LabVIEW 8.20,&nbsp;NI introduced the Mathscript node and this requirement is not necessary. Please look into this site: <a href="http://www.ni.com/labview/mathscript.htm" target="_blank">http://www.ni.com/labview/mathscript.htm</a>&nbsp;to learn more about mathscript node. In the formula node, you can use C-like convension to develop your equations. However, you can't use object-oriented programming in there. So, you need to remove the objects from the formula and use stricted types. You should be able to obtain more information in the help of the Formula Node. Hope this helps. ...

Contribute to MATLAB Central and Win a MATLAB Jacket
Many of you who post to this newsgroup are also regular contributors to the MATLAB Central File Exchange. Look for your favorite contributors on our File Exchange Author Profile page. You can read their profiles and see pictures: <http://www.mathworks.com/matlabcentral/reports/fileexchange/allProfiles/> In a random drawing, we recently awarded MATLAB jackets to three File Exchange authors with profile pages: Michele Giugliano, Andrey Egin, and Denis Gilbert. You can win a jacket, too. Just submit a new file to the File Exchange or update your author profile by December 2003 for a chance to win one of four MATLAB jackets. See the jacket below: <http://www.mathworks.com/matlabcentral/images/jeff3.jpg> Here are some interesting File Exchange facts: - Since its inception in 2001, visitors have downloaded more than 1.25 million submissions from the File Exchange. - In September 2003 alone, visitors downloaded 80,085 files, an average of 2670 a day! .... what if the prize was a free copy of the next version of Matlab :-) majb Min Poh wrote: ....or an offer for employment... aj "bourassa" <bourassa-m@rmc.ca> wrote in message news:3f9d507d$1@rmcnt03a.rmc.ca... > ... what if the prize was a free copy of the next version of Matlab :-) > > majb > > Min Poh wrote: > ...

Convertion from Matlab to C++
Hi, My question is it possible to convert matlab code to C++? If yes, how we can convert matlab code and files to C++? Thank you very much. On 5/23/2012 3:09 AM, Fatiha wrote: > Hi, > My question is it possible to convert matlab code to C++? If yes, > how we can convert matlab code and files to C++? > Thank you very much. matlab coder http://www.mathworks.com/products/matlab-coder/ ...

Matlab parallel for loop or Matlab open pool
I am trying to to some computations and I would like to do it in parallel using parfor or by Opening the matlabpool.. as the current implementations is too slow: result=zeros(25,16000); for i = 1:length(vector1) % length is 25 for j = 1:length(vector2) % length is 16000 temp1 = vector1(i); temp2 = vector2(j); t1 = load(matfiles1(temp1).name) %load image1 from matfile1 t2 = load(matfiles2(temp2).name) % load image2 from matfile2 result(i,j)=t1.*t2 end end It work fine but I would really like to know if there is a way to speed thing up ... Thanks a lot in advance! ...

US-TX-Austin: Signal Processing Eng., C/C++, Matlab, Verilog, algorithm devel.; (45345932412)
US-TX-Austin: Signal Processing Eng., C/C++, Matlab, Verilog, algorithm devel.; (45345932412) ============================================================================================= Position: Signal Processing Eng. Reference: SMC01894 Location: Austin TX Duration: Perm Skills: 6 years of total industry experience or greater An in-depth knowledge of signal processing algorithm development A solid understanding of C/C++ and Matlab A solid understanding of Verilog or similar language Prior experience in a communications or related IC development environment Knowledgeable with standard IC design tool flows Wireless LAN or OFDM algorithm experience Excellent communication skills Scope: Signal processing design engineer. Activities include algorithm development and implementation in both RTL and firmware for wireless communications ASICs. Responsibilities: Actively participating in the definition and implementation of communication ASICs Algorithm design Implementation and debug Methodology definition Please send your current resume in confidence to <staffing@eurosoft-inc.com> ..45345932412. ...

Call Matlab m-file from Matlab Scrip Node
My problem with matlab script node is related to calling function in matlab.&nbsp; I created an m-file function that takes an imput temperature (from DAQ) and defines a material property.&nbsp; My matlab script node doesn't seem to recognize my function.&nbsp; I have placed the function in the folder the vi is currently located, but it doesn't read it.&nbsp; How do I get matlab script node to read the functions I create in matlab? Add the directory to matlab path, or call the .m file with it full name ( D:\..... \myfile.m) Let me clarify, &nbsp; I have pasted my matlab code into the matlab scrip node. &nbsp; In this code, I have called a subfunction that I have created. &nbsp; Example k(n)=k_c(T(n)) where k_c is a subfunction I have created. &nbsp; How do I get my code in the node&nbsp;to sucessfully read the subfunction k_c? &nbsp; &nbsp; &nbsp; As indicated, you need to add the directory where the .m file containing the function resides to the list of paths that are read in. This is your startup.m file. The other option is to do a "cd" command prior to calling your function to change to the directory where the .m file containing the function resides. Thanks for reiterating the information.&nbsp; My matlab script node is working properly.&nbsp; I had never used the "cd" command in matlab.&nbsp; I always set the working directory when I open the program, and put all the m files into t...

Need help for a matlab mini project
Hello everyone, I have a matlab in class exercise due in few days. I am new to matlab and the instructions provided with the assignment is minimal. Can Someone help me with the basic understanding as in how can I map the problem's solution to matlab script ? I am not able to post question here as it is a jpeg file. Please let me know and then we can discuss further. ...

ms access
Hi there! Im stuck in this problem and I dont find any helpful information out there. I have a function in vba ms access that I want to call from matlab. Actually, my goal is to use that function in fmincon and optimize it. But first Im just trying to call it. So far I have this: Access = actxserver('Access.application'); Db = invoke(Access.DBEngine,'OpenDatabase', 'path.accdb'); The question is how to call my function in accesss? something like: result = Access.Run('myaccessfun',param); Any help is appreciated! "Rogelio " <rogelioa.deletethis@math.uio.no> wrote in message <joo6ob$hje$1@newscl01ah.mathworks.com>... > Hi there! > > Im stuck in this problem and I dont find any helpful information out there. I have a function in vba ms access that I want to call from matlab. Actually, my goal is to use that function in fmincon and optimize it. But first Im just trying to call it. > > So far I have this: > Access = actxserver('Access.application'); > Db = invoke(Access.DBEngine,'OpenDatabase', 'path.accdb'); > > The question is how to call my function in accesss? something like: > result = Access.Run('myaccessfun',param); > > Any help is appreciated! I have some small achievements. The proper method to call on the COM object is 'Run' (just as calling myaccessfun from an other database in access). If I write Access.methodsview ...

Matlab COM interface from C++
Has anybody managed to connect to the Matlab COM interface directly from C++? Not just the "Matlab Engine", which can't be opened in "desktop" mode with full debugging. I need the debugging features and it appears the only way to get them is to go directly in through the COM interface. If so, can I get a copy of the relevant code that connects, shoves data to and fro, and executes a command? Thanks in advance. Additionally, has anybody managed to dump out the routines and calling sequences available through the COM interface? That would be a good start. -- James A. (Andy) Moorer www.jamminpower.com Adobe Systems, Incorporated On Thu, 02 Oct 2008 01:11:22 GMT, "James A. \(Andy\) Moorer" <jamminpower@earthlink.net> wrote: >Has anybody managed to connect to the Matlab COM interface directly from >C++? Not just the "Matlab Engine", which can't be opened in "desktop" mode >with full debugging. I need the debugging features and it appears the only >way to get them is to go directly in through the COM interface. > >If so, can I get a copy of the relevant code that connects, shoves data to >and fro, and executes a command? Thanks in advance. > >Additionally, has anybody managed to dump out the routines and calling >sequences available through the COM interface? That would be a good start. It's been a while (as in Matlab 6.5.1) but I have connected C++ code to Matlab us...

Using matlab dll in c#
Does anyone now where I can found example code on how to use dll objects (created in Matlab) in .NET Visual C# Jakes Windell wrote: > > > Does anyone now where I can found example code on how to use dll > objects (created in Matlab) in .NET Visual C# <http://www.codeproject.com/dotnet/matlabeng.asp> read the part about "access with dll" Below is an example that works for calling a MATLAB Compiler 4.0 (R14) generated DLL from C#... Copy the following code and save it as timestwo.m: function y = timestwo(x) y = 2*x; H=plot(y*[1:10]); waitfor(H); This function multiples the input by two and then displays a line plot. Now execute "mbuild -setup" and select your Microsoft compiler. Generate the shared library by executing: mcc -B csharedlib:libtimestwo timestwo.m Note that, in order to call the generated DLL, the DLL must reside either in the same directory as your executable or in a directory on your system path. For help in how to modify the system path, see: http://www.mathworks.com/support/solutions/data/1-15ZLK.html?1-15ZLK Also, if you move the generated DLL to another directory, be sure to also move the associated CTF-file to the same directory. Open Microsoft Visual Studio .NET. Select File->New->Project. Then select Visual C# Applications in the left pane and Console Application in the right pane. Click OK and some automatically generated code will appear. Replace this code with: using System; using Syst...

Matlab builder JA: parse java string to matlab cell
Hi all, I'm building a java swing based GUI for my Matlab application. As such, user input is available as text strings, for example "{[0; 0], [3.5 0; 0 2]}" (mean vector and covariance matrix of a 2D Gaussian). The user input will be passed to the compiled matlab method as a MWCellArray. Problem is how do a convert (parse) the above string into a MWCellArray? From its javadoc http://www.mathworks.com/access/helpdesk/help/toolbox/javabuilder/MWArrayAPI/index.html the following method is available: java.lang.String toString() Returns a string representation of this array, but the reverse method is not. Evidently, parsing a string like the one above is a non trivial task and I'm loath to attempt writing one by myself. I would be very thankful if someone can point me to the required parser implementation. Matlab itself is carrying out this task all the time, perhaps it is possible to access Matlab's own parser. Help much appreciated, Ritesh ...

C#? and Matlab? which one has future?
Previously, much of the reason I use matlab is because of its graphics capabilities. The microsoft visual studio and C# (GDI+ in particular) language change the situation gradually. I spent a lot of time try to take advantage of both and tried very hard to combine them together using Matlab's COM builder. Eventually, I give up. After undersdanding more about C# framework, I found that C# and GDI+ provide tools I need to create any type of graphics and charts very easily. The DataGridView combinining with GDI+'s graphics capability applow me to create spreadsheet-like application, which is very hard to be achieved using matlab. In particular, after reading two useful books "Professional C# - Graphics with GDI+" (for brief discusion, see for xample: <http://www.codeproject.com/books/1861004990.asp)> nd "C# CHarts and Graphics" (see sample chapters from publishing.unicadinc.com), now i can create any kind of matlab chart or graphics using C#. and have much more flexibility than using matlab. Now I switch to C# total and don't want to touch matlab anymore (even though i have used matlab for many years). I don't see matlab's future. Mike <sf_mike01@yahoo.com> wrote in news:ef52d21.-1 @webcrossing.raydaftYaTP: > Previously, much of the reason I use matlab is because of its > graphics capabilities. The microsoft visual studio and C# (GDI+ in > particular) language change the situation gradually. I spent a lot of > t...

bar
In MatLab 6.5, the routine above works normal: figure; sem=Average(:,2)./sqrt(Average(:,3)); bar([1:1:7],Average(:,1),sem); ylabel('% of epochs analyzed') xlabel('Frequency Band') title ('Occurrence of Oscillatory Events - Ch X') %Where Average and sem are vectors; But, in MatLab 7.0, the same code cause the following error: ??? Error using ==> xychk Too many input arguments. Error in ==> bar at 53 [msg,x,y] = xychk(args{1:nargs},'plot'); Error in ==> cross_subj_analysis>ok_Callback at 327 bar([1:1:7],Average(:,1),sem); I'd like to know why this occour. Thanks Henrique In article <g7a1j6$l1$1@fred.mathworks.com>, Henrique Amaral <henriquetomaz@uol.com.br> wrote: >In MatLab 6.5, the routine above works normal: >figure; >sem=Average(:,2)./sqrt(Average(:,3)); >bar([1:1:7],Average(:,1),sem); >ylabel('% of epochs analyzed') >xlabel('Frequency Band') >title ('Occurrence of Oscillatory Events - Ch X') >%Where Average and sem are vectors; >But, in MatLab 7.0, the same code cause the following error: >??? Error using ==> xychk >Too many input arguments. >Error in ==> bar at 53 > [msg,x,y] = xychk(args{1:nargs},'plot'); >Error in ==> cross_subj_analysis>ok_Callback at 327 >bar([1:1:7],Average(:,1),sem); >I'd like to know why this occour. When the third argument is numeric, it must be the bar width. barwidth must b...

How to integrate Matlab, c++, and verilog
-------- Original Message -------- Date: 12 Sep 2003 23:52:45 GMT Newsgroups: comp.lang.verilog Hello, My university has NC-verilog from cadence. I've used it mostly from the command-line, in much the same way I used verilog-XL. I have also used matlab/c++ (with the standard template library, STL) to explore some CAD algorithms. Matlab is the top-most environment. It calls my C++ program, which was compiled in a very specifical way (described in the matlab documentation) to be called as a dynamic library. My C++ program does call-backs to the parent matlab environment for some things. Some matlab files are also used in the compilation process. I've come to a phase in my thesis where I have to combine matlab, C++/STL, and nc-verilog. The C++ code must evaluate a great number of verilog designs by repeatedly invoking simulations. Hopefully, I can do this by keeping the simulation engine running and simply resubmitting various verilog files. Only certain parameter definitions will change between the various simulations. Hopefully, I can avoid recompiling. Ideally, I can extract output data from certain nodes without having to write to a file. My understanding is that API work can be very cumbersome and messy. A colleague suggested looking at SystemC. He has some experience with Verilog's PLI, but advises against going that route. So I will start checking out the SystemC website. I wonder if more experienced people than I can give me a heads up on...

can't run matlab setup/No puedo correr matlab
Hi! I opened the&nbsp;matlab script fractal.vi&nbsp;then my antivirus (Kaspersky)&nbsp;ask&nbsp;if I acept the modified te registry of matlab setup,&nbsp; I &nbsp;say "yes" After that when I want open matlab the setup run but inmediatly it's close, why???? &nbsp; Hola: Abri el matlab script fractal.vi y mi antivirus (Kasoersky)me preguntaba si aceptaba una modificacion del registro del setup de matlab yo acepte Despues de eso cuanto abro matlab se cierra inmediatamente porque?? &nbsp; &nbsp; &nbsp; Hola Sa�l Es probable que el problema est� relacionado con el antivirus Kaspersky, trata de deshabilitarlo y correr nuevamente el ejemplo.&nbsp; Si esto no funciona revisa el estado de tus licencias de LabVIEW y de Matlab, probablemente tengas que reinstalar el programa y/o activar las licencias. �Qu� versi�n de LabVIEW y Matlab tienes? �El comportamiento es el mismo con el otro ejemplo?, me refiero al de la siguiente dir: labview\examples\scriptnode\Differential Equation.llb\MATLAB Script - Lorenz Diff Eq.vi Si corres este ejemplo �El antivirus tambi�n te pregunta cambiar lo de los registros?, ser�a bueno contactar a Mathworks para saber c�mo reconfigurar nuevamente los registros de Matlab ...

some problems of codes of MATLAB 7.0 working on MATLAB 6.5
I have used MATLAB for few hours.So I don't know the differences between version 6.5 and 7.0.I want to use some codes of MATLAB 7.0, but they doesn't work in MATLAB 6.5.How to change these codes so that they can work in matlab 6.5.Waiting for your help. Thank you . The codes are like this .I think changing the function findPI may work ,but I don'y know how % PIfun.m % Evaluate a function used to find the PI-line, using Kyle Champley's % method. % % Adam Wunderlich % last update: 5/18/06 function y = PIfun(r,R,h,gamma,x3,sb) temp = R - r*cos(gamma-sb); y = h*((pi - 2*atan(r*sin(gamma-sb)/temp))*(1 + (r^2 - R^2)/ (2*R*temp)) ... + sb) - x3; % find_PI_Line.m % % Find the the parametric interval corresponding to the unique PI-line % passing through the point x for a given helical pitch. % This code implements the method of Kyle Champley. % inputs: P = pitch (cm/turn), R = helix radius, delta_s = s stepsize, x % output: PI = [sb st] % % Adam Wunderlich % last update: 5/18/06 function [PI] = findPI(P,R,delta_s,x) h = P/(2*pi); r = sqrt(x(1)^2+x(2)^2); gamma = atan2(x(2),x(1)); options = optimset('TolX',h*delta_s/100,'FunValCheck','on'); [sb,fval,exitflag] = fzero(@(sb) PIfun(r,R,h,gamma,x(3),sb),... [(x(3)-h*pi)/h,x(3)/h],options); if exitflag ~=1, disp('Error: PI invalid'); end % note that beta=sb in Kyle's formula alphaX = atan(r*sin(gamma-sb)/(R - r*cos(gamma-sb))); st = sb + pi -...

help regarding Matlab to C conversion
Hi all, I have written some code in Matlab. Can i directly convert this ".m" file into C code (.c/.cpp file). If there is anytool in Matlab or anywhere please tell me . thanks and regards yogesh You will need the MATLAB compiler (mcc) for which a separate licence is required. <help mcc> Roy http://www.danielsorogon.com/Webmaster "yogesh kumar" <yogesh_kec@rediffmail.com> wrote in message news:qo1gtbpi9sha@legacy... > Hi all, > I have written some code in Matlab. Can i directly convert this > ".m" file into C code (.c/.cpp file). If there is anytool in Matlab or > anywhere please tell me . > thanks and regards > yogesh > ...

Video Compression using matlab or C
Hello i need matlab or C code for 1- Video Compression 2- Speech Recognition 3- Color image Compression Hi, I need every kind of methods to : 1. Finish my thesis 2. Make peace on earth 3. Become the master of the univers. Thinking to myself, mainly answers for the third question would be greatly appreciate. Seriously ! Do you expect that someone reply : "Dear Kamil Dimililer, I have all codes that you want. Do you want that I send it to you by e-mail or on CD ? Waiting for your reply Your slave" J�r�me J�r�me wrote: > > > Hi, > > I need every kind of methods to : > > 1. Finish my thesis > 2. Make peace on earth > 3. Become the master of the univers. > > > J�r�me Can't help you on the first two methods, but for option 3 you need to get the Matlab Despotic_Ruler toolbox. then check out the function Merciless_Tyrant(option); Where option is a string parameter which is either 1. 'Home' 2. 'Country' 3. 'World' 4. 'Universe' So I am informed, on the latest version of this, for the Universe option, you need to specify which Universe. You can tell its Friday :-) Dave Robinson Thanks Mr Robinson for your kind reply. May I ask you something else ? Have you got a compiled version of your Matlab function ? A stand alone application for all platforms would be greatly appreciate. Did I already mention that people on this NewsGroup are great ? Thanks a lot J�r�me J�r�me wrote: > >...

Web resources about - Linking C++ with Matlab - comp.soft-sys.matlab

GPL linking exception - Wikipedia, the free encyclopedia
A GPL linking exception modifies the GNU General Public License (GPL) in a way that enables software projects which provide library code to be ...

Facebook Tests Aggregated Tags Linking External Sites
Facebook appears to be testing the linking of its aggregated tags on its news feed leading to destinations outside of the social network, rather ...

Native App Linking for Android - Facebook-Entwickler
As part of Facebook for Android 1.9, you have granular controls to set where Bookmarks, Requests, Fe...

How will Facebook change as deep linking becomes more prevalent?
... web), are becoming more widely adopted by the day. Announced in April at f8 , App Links continues to grow as developers embrace deep linking. ...

Mobile app deep-linking and new Cards - Twitter Blogs
Twitter Cards are being used by more than 10,000 developers, mobile apps and websites to richly represent content on Twitter, including article ...

ResortApp — The app linking you to America's premier resort towns on the App Store
Read reviews, compare customer ratings, see screenshots, and learn more about ResortApp — The app linking you to America's premier resort towns. ...

Flickr: Linking Paths' Photostream
Explore Linking Paths' photostream on Flickr. This user has 368 photos on Flickr.

Deep - Linking: A fundamental change in the mobile app ecosystem - YouTube
... Co-Founder and CPO of TUNE, and John Milinovich, Co-Founder and CEO of URX, present an in-depth look at the current eco-system for deep linking ...

Tony Abbott raises eyebrows after linking WWII D-Day memorial with policies on mining and carbon taxes ...
Prime Minister Tony Abbott has courted controversy by linking a commemoration of the 70th anniversary of D-Day to his government's policies. ...

Syrian Opposition Claims It Has Evidence Linking Assad Forces To Recent Chlorine Gas Attack
BEIRUT (Reuters) – Syrian opposition activists have posted photographs and video that they say shows an improvised chlorine bomb to back up claims ...

Resources last updated: 3/30/2016 12:28:29 PM