f



Matlab functions: "constr" to "fmincon"

hello,
how can I convert the "constr" function to "fmincon" (in matlab)?
Actually I investigated what to do, and I changed the order of
arguments in the function for the version 7.0. However the program
continues to send warning messages.
What other changes should be done for fmincon function?

 ----------------------------------------------------
the warning message is :
mbaypca(xn,p,Qe,alpha_prior,x_prior)
Warning: Length of lower bounds is > length(x); ignoring extra
bounds.
> In checkbounds at 27
  In fmincon at 195
  In mbaypca at 42
Warning: Length of upper bounds is > length(x); ignoring extra
bounds.
> In checkbounds at 37
  In fmincon at 195
  In mbaypca at 42
Exiting due to infeasibility: 5 lower bounds exceed the
corresponding upper bounds.
 ------------------------------------------------------
for now, thank you.
0
9/7/2006 4:33:27 PM
comp.soft-sys.matlab 211266 articles. 18 followers. lunamoonmoon (258) is leader. Post Follow

0 Replies
603 Views

Similar Articles

[PageSpeed] 10

Reply:

Similar Artilces:

about "++" and "--"
why this program snippet display "8,7,7,8,-7,-8" the program is: main() { int i=8; printf("%d\n%d\n%d\n%d\n%d\n%d\n",++i,--i,i++,i--,-i++,-i--); } > why this program snippet display "8,7,7,8,-7,-8" Ask your compiler-vendor because this result is IMHO implementation-defined. Check this out: http://www.parashift.com/c++-faq-lite/misc-technical-issues.html#faq-39.15 http://www.parashift.com/c++-faq-lite/misc-technical-issues.html#faq-39.16 Regards, Irina Marudina fxc123@gmail.com wrote: > why this program snippet display "8,7,7,8,-7,-8&q...

"out" and "in out"
Hi i found the following explaination: In Ada, "in" parameters are similar to C++ const parameters. They are effectively read-only within the scope of the called subprogram. Ada "in out" parameters have a reliable initial value (that passed in from the calling subprogram) and may be modified within the scope of the called procedure. Ada "out" parameters have no reliable initial value, but are expected to be assigned a value within the called procedure. What does "have no reliable initial value" mean when considering the "out" parameter? By c...

why "::", not "."
Why does the method of modules use a dot, and the constants a double colon? e.g. Math::PI and Math.cos -- Posted via http://www.ruby-forum.com/. On Oct 26, 2010, at 01:48 , Oleg Igor wrote: > Why does the method of modules use a dot, and the constants a double > colon? > e.g. > Math::PI and Math.cos For the same reason why inner-classes/modules use double colon, because = they're constants and that's how you look up via constant namespace. Math::PI and ActiveRecord::Base are the same type of lookup... it is = just that Base is a module and PI is a float....

Urgent need """""""""""INFORMATICA DEVELOPER"""""""""""""
Hello Partners, How are you ? Please find the requirements below. Title: Database/ETL Developer Duration: 6 months Location: NY Exp: 7+ Locals preferred Database/ETL requirements (Mandatory) Candidate must have worked with financial instruments, preferably Mutual Funds but, Equities are also ok. PL/SQL - packages, Stored procs, Functions, Aggregate functions, Pipelined Functions Informatica 8.6 - especially complex mappings, complex maplets, complex workflows, transformations Oracle 10g/11g Unix/Linux shell scripting Database/ETL requirements (Optional) Data warehousing experience Threading and job concepts in 10g/11g Cost based Optimizer concepts in 10g/11g Must : Experience with XML files and partitioning concepts in Oracle, Collections, Material Views Note : No phone calls please. : send Resumes to karthik@bhaninfo.com Thanks & Regards Karthik BhanInfo karthik@bhaninfo.com ...

"In" "Out" and "Trash"
I just bought a new computer and I re-installed Eudora Light on my new computer. But when I open Eudora, the "In", "Out" and "Trash" links are not on the left side of the screen the way they were on my old computer. How can I get these links back on the left side of the screen? Thank you. On 25 Mar 2007 09:49:22 -0700, "abx" <abfunex@yahoo.com> wrote: >I just bought a new computer and I re-installed Eudora Light on my new >computer. But when I open Eudora, the "In", "Out" and "Trash" links >are ...

Does Python have equivalent to MATLAB "varargin", "varargout", "nargin", "nargout"?
Thank you in advance for your response. Dmitrey openopt@ukr.net writes: > Thank you in advance for your response. And those do ... ? -- Jorge Godoy <jgodoy@gmail.com> Where you would use varargin and nargin in Matlab, you would use the *args mechanism in Python. Try calling def t1(*args): print args print len(args) with different argument lists Where you would use varargout and nargout in Matlab you would use tuple unpacking in Python. Play with this def t2(n): return tuple(range(n)) a, b = t2(2) x = t2(3) On Feb 18, 12:58 pm, open...@ukr.net wrote: > Th...

interface "Matlab" with "Ansys" ??
Did any body know how to interface "Matlab" with "Ansys" ?? I am having matlab optimization code. but,how to interface it with ANSYS I don't no. pl,guide me to solve my problem . with regards Sampath Kumar L Mob :- 9591488258 "Sampath Kumar" <samathkmr.ln@gmail.com> wrote in message <ilkgbg$i5v$1@fred.mathworks.com>... > Did any body know how to interface "Matlab" with "Ansys" ?? I am having matlab optimization code. but,how to interface it with ANSYS I don't no. pl,guide me to solve my problem . > > with regard...

Urgent JAVA Requirement in """"""NEW YORK"""""""""
Hello Partners, How are you ? Please find the requirement below. Location : NY Duration : 8 mnths Rate :Open Job description: Java/J2EE Web Service Developer =B7 (4+ years of application development experience in Java/J2EE and Web service technologies. =B7 Experience with spring & Hibernate. =B7 Experience with J2EE Application Server (preferably Web logic). =B7 Preferable Aqua logic DSP Experience =B7 Preferable Sonic ESB Composite Service experience Experience working in UNIX environment. Good working knowledge of Oracle RDBMS and PL/SQL) Note : Please send your updated resume along with contact no to Karthik@bhaninfo.com. Thanks & Regards Karthik BhanInfo karthik@bhaninfo.com # 1572, 7 th Floor Suites, 1 Blue Hill Plaza Pearl River,NY-10965 www.bhaninfo.com ...

puts "\\".gsub("\\", "\\\\")
Hello, I have a mini-ruby quiz. Guess what this line of code writes to the console, then try it for yourself: puts "\\".gsub("\\", "\\\\") Why is that so? Martin From: martinus [mailto:martin.ankerl@gmail.com]=20 # Hello, I have a mini-ruby quiz. Guess what this line of code writes to # the console, then try it for yourself: # puts "\\".gsub("\\", "\\\\") puts "\\".gsub("\\", "\\\\") \ #=3D> nil # Why is that so? faq. escaping the escape in sub/gsub. search the archives. maybe you want somethin...

Question about "sprintf" "@" "do for"
Hello, this works: A1=3D1 A2=3D2 A3=3D3 i=3D1 vari=3Dsprintf("A%.f",i) print vari,"=3D",@vari i=3Di+1 vari=3Dsprintf("A%.f",i) print vari,"=3D",@vari i=3Di+1 vari=3Dsprintf("A%.f",i) print vari,"=3D",@vari do for [i=3D1:3]{ vari=3Dsprintf("A%.f",i) print vari } But I want to have "print vari,"=3D",@vari" in the loop. But it dosen't=20 work. Why can't I use "print vari,"=3D",@vari" in the loop? Is there a=20 solution for? J=C3=B6rg Jörg ...

Gary Sokolich """"""
"""""""""" http://www.manta.com/c/mmlq5dm/w-gary-sokolich W Gary Sokolich 801 Kings Road Newport Beach, CA 92663-5715 (949) 650-5379 http://www.tbpe.state.tx.us/da/da022808.htm TEXAS BOARD OF PROFESSIONAL ENGINEERS February 28, 2008 Board Meeting Disciplinary Actions W. Gary Sokolich , Newport Beach, California �V File B-29812 - It was alleged that Dr. Sokolich unlawfully offered or attempted to practice engineering in Texas (...) Dr. Sokolich chose to end the proceedings by signing a Consent Order that was accepted by ...

How do I "convert" this to a "function"?
Probably the wrong wording but since I'm not a scripter I won't claim to know what I'm talking about. I got this script from www.htmlgoodies.com <script language="JavaScript"> <!-- window.open ('photos01.html','photogallery',config='height=550, width=750,toolbar=no, menubar=no, scrollbars=no, resizable=no, location=no, directories=no, status=no'); --> </SCRIPT> Obviously, it opens a new browser window with my Photo Gallery in it. How do I convert it into a "function" in the <head> section to call later from a l...

"==" is NOT TRUE "==", WHY?
[CODE START] x=5; y=8; if (x + y + 1E-15 == 13) a = 3 else a = 8 end [CODE END] When x + y + 1E-15, the code above returns a = 8. When x + y + 1E-16, the code above returns a = 3. Why? Kindly advise. Thanks. "onemilimeter Chen" <onemm@example.com> wrote in message <g7adrj$5tr$1@fred.mathworks.com>... > [CODE START] > x=5; > y=8; > if (x + y + 1E-15 == 13) > a = 3 > else > a = 8 > end > [CODE END] > > When x + y + 1E-15, the code above returns a = 8. > When x + y + 1E-16, the code above returns a = 3. > > Why? ...

what does the "+" and the "-" mean?
I recently read what the "+" and the "-" signs mean for compact discs. Of course, a friend has just asked me and I now forget. I've searched all over the place with no results. Anyone know? TIA! .. -------------------------------------- Mike Richter, were you born with "Scam Artist" emblazoned on your face? -------------------------------------- roscoe james wrote: > > I recently read what the "+" and the "-" signs mean for compact discs. Of > course, a friend h...

Re: "out" and "in out"
"no reliable initial value" means, you cannot rely on the value, but it may have a value. This depends on the parameter passing mechanism, which is _not_ related to the parameter mode (contrary to what many people think). So the parameter mode is there (nearly) solely for the information of the reader. The parameter passing mechanism for all kinds of parameters is defined in the RM. There are parameters passed by copy (in and out), by reference; for some it is explicitly left undefined. In your case, the passing mechanism is by reference, so you get what you get. But don't rely...

how to change "/" to "\"
iam new to shell scripting and i have plz can anyone help in changing the pattrern "/" to "\" using the sed command. olympie@gmail.com wrote: > iam new to shell scripting and i have plz can anyone help in changing > the pattrern "/" to "\" using the sed command. sed 's/\//\\/g' will replace all '/' with '\' srp -- http://saju.net.in Saju Pillai <saju.pillai@gmail.com> wrote: >> iam new to shell scripting and i have plz can anyone help in changing >> the pattrern "/" to "\" using ...

"A" is not equal "A"?
I was trying to convert String Array to String A through cycle and than compare the result with String B but eventhough results were the same it returned false. I'am working in BlueJ 3.1.0 Code is: public boolean Method () { String[] Example = {"a","b","c"}; String A = ""; String B = "abc" for (int i = 0; i<3 ; i++) { A = A + Example[i]; } if (A == B) { return true; } } never got true... I appreciate any suggestions how to solve this Den 08.04.2014 10:06, skrev 245dav@gmail.com:...

How to differentiate "1" and "l" in matlab?
These two symbols are nealy displayed in the same form. Anyone has a good method to make them differentiable? gim gimmytang wrote: > These two symbols are nealy displayed in the same form. Anyone has a good method to make them differentiable? > gim There are several programming fonts available which clearly distinguish commonly confused characters. If you are using windows try for example "ProggyClean TT". -Herbert ...

why have both "." and "->" ?
I used to remember why c++ needed both ? Could somebody help me here ? For example class A{ f(); }; A* aa; You could do either "aa->f()" or "(*aa).f()". So why does C++ need both operators. Raj "raj" <rajkumar@hotmail.com> schreef in bericht news:d7fee6d0.0406230748.694b966b@posting.google.com... > I used to remember why c++ needed both ? > Could somebody help me here ? > > For example > > class A{ > f(); > }; > > A* aa; > > You could do either "aa->f()" or "(*aa).f()". So why does C++...

The Services "matlab.exe" & "matlabserver.exe" in new versions of MATLAB
Hello all after installing old versions of MATLAB (2006a and before), we noticed that the two services: "matlab.exe" and "matlabserver.exe" are always running in the background. But they disappear in the new versions. How can I make these services work again in the background in the new versions (like 2014a)? Best Regards, Rasheed ...

Is there any """Anti Stringizing operator #"""
Hi everybody:D I've a string that contains the name of a class. Some members told that I can use """Stringizing Operator (#)""", but the problem is here, that I have the string, & I want something vice- versa. As we know with """Stringizing Operator (#)""", we can get the stirng name of a class or ... str <--- #ClassA But I want to instantiate a class that I have just it's name as a string. ClassA * clsA = new ??? <--- Str ??? How can I do it? I don't want to use """HardCoding"&qu...

"plot", "imshow" and "quiver"
Hi all. So recently I made the discovery that when use "imshow" command, the YDir parameter under Axis Properties is set to "reverse" by default. To me this seems counter intuitive. Why wouldn't YDir be "normal" by default? When set at "normal" it turns out that my image is actually flipped upside down. On the contrary, when use "quiver" command to plot a vector field, the YDir is set at "normal" by default. Even though this makes more sense to me, because "reversed" YDir is the correct way to display an image (as in "imshow"), the result of "quiver" is that the vector fields this time depict the objects as if they are upside down... So every time I use "quiver" I always add the following line to revert the objects back to its normal orientation... set(gca, 'YDir', 'reverse')... In addition, "plot" uses "normal" setting for YDir. The only issue I have is that I use these commands fairly frequently in my job and sometimes they can get a little bit confusing in terms of display. So I wonder why MATLAB hasn't standardized them so that the objects always get displayed the same way. It's just a comment I have. Thank you. "Clare " <flyingclare@gmail.com> wrote in message news:hefvdk$3md$1@fred.mathworks.com... > Hi all. So recently I made the discovery that when use "imshow" command, > the ...

Matlab compiler, errors with "get" and "set"
Hi, I'm receiving errors for "get" and "set" commands like follows: Warning: File: c:\matlab6p5p1\toolbox\matlab\uitools\movegui.m Line: 216 Column: 9 References to "get" require the C/C++ Graphics Library when executing in stand-alone mode. You must specify -B sgl or -B sglcpp in order to use the C/C++ Graphics Library. Also, if using the -W option, you must specify either the mainhg or libhg wrapper type. A run-time error will occur if the C/C++ Graphics Library is not present when "get" is called. For some time I didn't receive these errors,...

Matlab Error: "identifier" expected, "(" found.
>>a = 100;b = 4;c = 1;d = 10;e = 20;f = 100;g = 150;h = 60; >> x0 = [1.1651,1.3316,1.3434,1.4823,1.5203,1.5544,2.1363,2.3997,4.7142]; >> f=@(x)parameterfun(x,a,b,c,d,e,f,g,h) ??? f=@(x)parameterfun(x,a,b,c,d,e,f,g,h) | Error: "identifier" expected, "(" found. Can any one please tell how to overcome this problem,from what I have searched I have found that it is caused because I am using older version of matlab (release 12.1 version 6.1) so please tell how do I over come this. Any help is appreciated On Friday, October 26, 2012 9:47:08 AM UTC+13, Rohit gupta wrote: > >>a = 100;b = 4;c = 1;d = 10;e = 20;f = 100;g = 150;h = 60; > > >> x0 = [1.1651,1.3316,1.3434,1.4823,1.5203,1.5544,2.1363,2.3997,4.7142]; > > >> f=@(x)parameterfun(x,a,b,c,d,e,f,g,h) > > ??? f=@(x)parameterfun(x,a,b,c,d,e,f,g,h) > > | > > Error: "identifier" expected, "(" found. > > > > Can any one please tell how to overcome this problem,from what I have searched I have found that it is caused because I am using older version of matlab (release 12.1 version 6.1) so please tell how do I over come this. > > > > Any help is appreciated Why are you using an anonymous function? Why not simply call your function: x=parameterfun(x0,a,b,c,d,e,f,g,h); "Rohit gupta" <im.rohit@hotmail.com> wrote in message new...

Web resources about - Matlab functions: "constr" to "fmincon" - comp.soft-sys.matlab

Resources last updated: 3/20/2016 3:28:24 PM