I placed the c6713DSK board and a ADC and DAC connected in new module 
I have CCS v3.1 and i have run the setup
when i say generate code it gives me the following error
please help 
thanks in advance

Error building Real-Time Workshop target for block diagram 'untitled'. MATLAB error message:
Error using ==> callMakeHook.p>callMakeHook at 47
The call to ccslink_ert_make_rtw_hook, during the entry hook generated the following error:
    Error using ==> i_entryHookpoint at 52
Error while creating the link for IDE.

The build process will terminate as a result.

On Jan 21, 10:47=A0am, "busy " <yp.dr...@gmail.com> wrote:
> I placed the c6713DSK board and a ADC and DAC connected in new module
> I have CCS v3.1 and i have run the setup
> when i say generate code it gives me the following error
> please help
> thanks in advance
>
> Error building Real-Time Workshop target for block diagram 'untitled'. MA=
TLAB error message:
> Error using =3D=3D> callMakeHook.p>callMakeHook at 47
> The call to ccslink_ert_make_rtw_hook, during the entry hook generated th=
e following error:
> =A0 =A0 Error using =3D=3D> i_entryHookpoint at 52
> Error while creating the link for IDE.
>
> The build process will terminate as a result.

Do you know if your version of the CCSLink toolbox supports CCSv3.1?
The newer versions may only support CCSv3.3

"busy" wrote in message <hja3um$rdq$1@fred.mathworks.com>...
> I placed the c6713DSK board and a ADC and DAC connected in new module 
> I have CCS v3.1 and i have run the setup
> when i say generate code it gives me the following error
> please help 
> thanks in advance
> 
> Error building Real-Time Workshop target for block diagram 'untitled'. MATLAB error message:
> Error using ==> callMakeHook.p>callMakeHook at 47
> The call to ccslink_ert_make_rtw_hook, during the entry hook generated the following error:
>     Error using ==> i_entryHookpoint at 52
> Error while creating the link for IDE.
> 
> The build process will terminate as a result.


I am getting the following error while building my simulink model to generate the C code.

 

Error building Real-Time Workshop target for block diagram 'dspafxr'. MATLAB error message:

Error using ==> callMakeHook.p>callMakeHook at 47

The call to ccslink_ert_make_rtw_hook, during the entry hook generated the following error:

    Error using ==> i_entryHookpoint at 52

Error while creating the link for IDE.a                                                                                                    

 

The build process will terminate as a result.

 

I am using

Matlab R2007A

CCS v3.1

c6713dsk

 

can u please help me ? I need it for my project badly...

plz help me...

"Sujeet Kumar Padhi" <sujeetkupadhi@yahoo.com> wrote in message <jm9d5v$hf1$1@newscl01ah.mathworks.com>...
> "busy" wrote in message <hja3um$rdq$1@fred.mathworks.com>...
> > I placed the c6713DSK board and a ADC and DAC connected in new module 
> > I have CCS v3.1 and i have run the setup
> > when i say generate code it gives me the following error
> > please help 
> > thanks in advance
> > 
> > Error building Real-Time Workshop target for block diagram 'untitled'. MATLAB error message:
> > Error using ==> callMakeHook.p>callMakeHook at 47
> > The call to ccslink_ert_make_rtw_hook, during the entry hook generated the following error:
> >     Error using ==> i_entryHookpoint at 52
> > Error while creating the link for IDE.
> > 
> > The build process will terminate as a result.
> 


> 
> I am getting the following error while building my simulink model to generate the C code.
> 
>  
> 
> Error building Real-Time Workshop target for block diagram 'dspafxr'. MATLAB error message:
> 
> Error using ==> callMakeHook.p>callMakeHook at 47
> 
> The call to ccslink_ert_make_rtw_hook, during the entry hook generated the following error:
> 
>     Error using ==> i_entryHookpoint at 52
> 
> Error while creating the link for IDE.a                                                                                                    
> 
>  
> 
> The build process will terminate as a result.
> 
>  
> 
> I am using
> 
> Matlab R2007A
> 
> CCS v3.1
> 
> c6713dsk
> 
>  
> 
> can u please help me ? I need it for my project badly...
> 
> plz help me...

Hi guys,

Somebody resolved this?
As I have this same problem, I can't complete to build.
(Error while creating the link for IDE)

Please tell me the solution.

My environment is following:
    Matlab R2007a
    CCS v2.21    (I have CCS v3.3 & v5.2.1. But I do not install them.)
    DSP C6713

 Rgrds,
    Kaz