f



ERROR: CLI describe error: [IBM][CLI Driver][DB2/LINUXX8664]

I am kind of stuck to this... Has anyone experienced this
previously.... Following is my code...

PROC
SQL;
CONNECT TO DB2(DB=DOACD011
SCHEMA='MEMBER'
        USER=&UID
PASSWORD=&PWD);
 CREATE TABLE ODS_ALL_RECORDS
AS
 SELECT * FROM CONNECTION TO
DB2


(


SELECT


A.SUTL_RGTR_ID
      ,A.SUTL_RGTR_TYP_CDE
      ,A.SUTL_RGTR_TITL_NM
      ,A.CRCT_IND
        ,CASE
         A.SUTL_RGTR_STS_DT  WHEN '0001-01-01' THEN
'1'
       END AS RSDT
      ,CASE
       A.STRG_ANN_INCM_DT WHEN '0001-01-01' THEN
'1'
       END AS
AIDT
      ,CASE
A.STRG_NET_WRTH_DT
          WHEN '0001-01-01' THEN
'1'
       END AS
NWDT
      ,CASE
A.INVS_OBJ_DT
          WHEN '0001-01-01' THEN
'1'
       END AS
IODT
      ,CASE
A.SUTL_RGTR_STRT_DT
          WHEN '0001-01-01' THEN
'1'
       END AS STDT
    FROM MEMBER.SUIT_REG A WHERE A.SUIT_REGR_STS_CDE
in('ACTIV' ));
RUN;


The error i am getting is


RROR: CLI describe error: [IBM][CLI Driver][DB2/LINUXX8664] SQL0206N
"A.SUIT_REGR_STS_CDE" is not valid in the context where it is
       used.  SQLSTATE=42703


Any help would be appreciated


Thanks
0
12/19/2007 9:03:32 PM
comp.soft-sys.sas 142828 articles. 3 followers. Post Follow

0 Replies
3106 Views

Similar Articles

[PageSpeed] 8

Reply:

Similar Artilces:

ERROR: CLI describe error: [IBM][CLI Driver][DB2/LINUXX8664] SQL0206N
I am kind of stuck to this... Has anyone experienced this previously.... Following is my code... PROC SQL; CONNECT TO DB2(DB=DOACD011 SCHEMA='MEMBER' USER=&UID PASSWORD=&PWD); CREATE TABLE ODS_ALL_RECORDS AS SELECT * FROM CONNECTION TO DB2 ( SELECT A.SUTL_RGTR_ID ,A.SUTL_RGTR_TYP_CDE ,A.SUTL_RGTR_TITL_NM ,A.CRCT_IND ,CASE A.SUTL_RGTR_STS_DT WHEN '0001-01-01' THEN '1' END AS RSDT ,CASE A.STRG_ANN_INCM_DT WHEN '0001-01-01' THEN '1' END AS AIDT ,CASE A.STRG_NET_WRTH_DT WHEN '0001-01-01' THEN '1' END AS NWDT ,CASE A.INVS_OBJ_DT WHEN '0001-01-01' THEN '1' END AS IODT ,CASE A.SUTL_RGTR_STRT_DT WHEN '0001-01-01' THEN '1' END AS STDT FROM MEMBER.SUIT_REG A WHERE A.SUIT_REGR_STS_CDE in('ACTIV' )); RUN; The error i am getting is RROR: CLI describe error: [IBM][CLI Driver][DB2/LINUXX8664] SQL0206N "A.SUIT_REGR_STS_CDE" is not valid in the context where it is used. SQLSTATE=42703 Any help would be appreciated Thanks ...

Re: ERROR: CLI describe error: [IBM][CLI Driver][DB2/LINUXX8664]
On Wed, 19 Dec 2007 13:01:54 -0800, shaunak.adgaonkar@gmail.com <shaunak.adgaonkar@GMAIL.COM> wrote: >I am kind of stuck to this... Has anyone experienced this >previously.... Following is my code... > >PROC >SQL; >CONNECT TO DB2(DB=DOACD011 >SCHEMA='MEMBER' > USER=&UID >PASSWORD=&PWD); > CREATE TABLE ODS_ALL_RECORDS >AS > SELECT * FROM CONNECTION TO >DB2 > >( > >SELECT > >A.SUTL_RGTR_ID > ,A.SUTL_RGTR_TYP_CDE > ,A.SUTL_RGTR_TITL_NM > ,A.CRCT_IND > ,CASE > A.SUTL_RGTR_STS_DT WHEN '0001-01-01' THEN >'1' > END AS RSDT > ,CASE > A.STRG_ANN_INCM_DT WHEN '0001-01-01' THEN >'1' > END AS >AIDT > ,CASE >A.STRG_NET_WRTH_DT > WHEN '0001-01-01' THEN >'1' > END AS >NWDT > ,CASE >A.INVS_OBJ_DT > WHEN '0001-01-01' THEN >'1' > END AS >IODT > ,CASE >A.SUTL_RGTR_STRT_DT > WHEN '0001-01-01' THEN >'1' > END AS STDT > FROM MEMBER.SUIT_REG A WHERE A.SUIT_REGR_STS_CDE >in('ACTIV' )); >RUN; > > >The error i am getting is > >RROR: CLI describe error: [IBM][CLI Driver][DB2/LINUXX8664] SQL0206N >"A.SUIT_REGR_STS_CDE" is not valid in the context where it is > used. SQLSTATE=42703 >...

SAS Libname CLI error
While executing the sas job with a libname statement on a db2 server i get CLI error... i am running out of all the ideas...please help me out with this.... LIBNAME dashbrd DB2 Datasrc=&DB2DATABASE SCHEMA=DASHBRD USER=sas1 PASSWORD="&sas1passwd" ; *ERROR: CLI error trying to establish connection: [IBM][CLI Driver] SQL10007N Message "0" could not be retrieved. Reason code: "3". * Any ideas/ suggestions would be highly appreciated -- Thanks and Regards shaun Hi shaun, I think DB2 catalog is not installed in your sas server. or trying using this sy...

When is an error not an error?
When it's OSS slopware, of course. http://www.angelfire.com/planet/dfs0/Knode_send_error.png On 2006-09-12 02:42, * DFS wrote: > When it's OSS slopware, of course. > > http://www.angelfire.com/planet/dfs0/Knode_send_error.png > Well, some time ago I had a problem with OE - too long reference line to other posts, and OE of course refused to send... then crashed. Should I name it a feature? -- Andrea On Tue, 12 Sep 2006 03:25:29 +0200, Andrea wrote: > On 2006-09-12 02:42, * DFS wrote: >> When it's OSS slopware, of course. >> >> http:/...

ERROR: CLI execute error:(SQL0206N or SQL0408N) . Neither way
I know it is Friday ...end of the day, but....I am running code through SAS= environment (IN data mart implemented in DB2), trying to get unique member= s with at least 2 claims on different dates /*-------------------------------------------------------------------------= --------------- 3590=A0 Step 5a -=A0 Count at least 2 claims on different dates 3591=A0=A0=A0 -------------------------------------------------------------= --------------------------- 3591! ---*/ 3592=A0 EXECUTE( 3593=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 create table &tmpschema..ckd 3594=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 (=A0=A0=A0 Id=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0 char=A0=A0=A0=A0 (29) 3595=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 ,clms_cnt=A0=A0=A0=A0=A0=A0= =A0=A0=A0 smallint 3596=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 ) 3597=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 in "&twotblspc" 3598=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 not logged initially 3599=A0=A0=A0=A0=A0=A0 ) by HDMconnect; 3600 3601=A0 EXECUTE( 3602=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 insert into &tmpschema..ckd 3603=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 select=A0=A0 distinct 3604=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Id 3605=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 ,Count(distinct = Srv_Dt) as clms_cnt 36...

Re: SAS Libname CLI error
I'm going to guess environment problem of some kind, or a bad db2 client install. I would send that error to your DBA & see what s/he has to say about it. -----Original Message----- From: SAS(r) Discussion [mailto:SAS-L@LISTSERV.UGA.EDU] On Behalf Of Shounak Adgaonkar Sent: Friday, July 10, 2009 12:02 PM To: SAS-L@LISTSERV.UGA.EDU Subject: SAS Libname CLI error While executing the sas job with a libname statement on a db2 server i get CLI error... i am running out of all the ideas...please help me out with this.... LIBNAME dashbrd DB2 Datasrc=&DB2DATABASE SCHEMA=DASHBRD USE...

When is an error not an error?
The Java language specification claims in: 8.8.7.1 Explicit Constructor Invocations .... "If an anonymous class instance creation expression appears within an explicit constructor invocation statement, then the anonymous class may not refer to any of the enclosing instances of the class whose constructor is being invoked." Helpfully it gives an example: "For example: class Top { int x; class Dummy { Dummy(Object o) {} } class Inside extends Dummy { Inside() { super(new Object() { int r = x; }); // error } Inside(final int y) { super(new Object() { int r = y; }); // correct } } } " Notice the word 'error' in the comment. This example compiles without error and produces the correct code. In what sense is it an 'error'? It is not a compiler error, it is not a runtime error. To quote Douglas Adams "this must be some new meaning of the word 'error' with which I am unfamiliar". Any idea what's gone wrong? In article <gepkhr$rop$1$8302bc10@news.demon.co.uk>, Anon <blackhole@nowhere.com> wrote: > The Java language specification claims in: > 8.8.7.1 Explicit Constructor Invocations [<http://java.sun.com/docs/books/jls/third_edition/html/classes.html#8.8. 7.1>] > Notice the word 'error' in the comment. This example compiles without > error and ...

Re: ERROR: CLI execute error:(SQL0206N or SQL0408N) . Neither way
Smells like your sql is getting mangled. First, try it by hardcoding your values, just to see if you can connect and execute (confirm permissions and references). If that works, then insert some print steps in your code, to see what your macro vars are resolving to. Hopefully your problem will become obvious. CH On Fri, 6 Mar 2009 12:52:08 -0800, Irin later <irinfigvam@YAHOO.COM> wrote: >I know it is Friday ...end of the day, but....I am running code through SAS environment (IN data mart implemented in DB2), trying to get unique members with at least 2 claims >on different dates >/*---------------------------------------------------------------------------------------- >3590� Step 5a -� Count at least 2 claims on different dates >3591��� ---------------------------------------------------------------------------------------- >3591! ---*/ >3592� EXECUTE( >3593���������� create table &tmpschema..ckd >3594���������������������������������� (��� Id��������������� char���� (29) >3595�������������������������������������� ,clms_cnt��������� smallint >3596���������������������������������� ) >3597���������� in "&twotblspc" >3598���������� not logged initially >3599������ ) by HDMconnect; >3600 >3601� EXECUTE( >3602���������� insert into &tmpschema..ckd >3603���������� select�� distinct >3604������������������� Id >3605������������������ ,Count(distinct Srv_Dt) as clms_cnt >3606����������...

Re: ERROR: CLI execute error:(SQL0206N or SQL0408N) . Neither way #3
Were I the db2 SQL compiler .... >> EXECUTE( 3602 insert into &tmpschema..ckd 3603 select distinct 3604 Id 3605 ,Count(distinct Srv_Dt) as clms_cnt 3606 from &tmpschema..ckd_clm 3607 Group by Hedis_id 3608 having clms_cnt >= 2 3609 3610 ) by Hconnect; >> I'd check the scheme of ckd to make sure that it has only two columns, and that each matches up on data type (and possibly name) to the ID,ckd_clm header of ckd. INSERT has to know what to insert where. I'd also verify that Count(distinct Srv_Dt) resolves correctly to the required data type (integer instead of smallint ?). SQL compilers check for correct "relvar type". The summary function Count() yields by default a specific data type. db2 may require the same type in the row being inserted as in the target table. S -----Original Message----- From: SAS(r) Discussion [mailto:SAS-L@LISTSERV.UGA.EDU] On Behalf Of Irin later Sent: Friday, March 06, 2009 3:52 PM To: SAS-L@LISTSERV.UGA.EDU Subject: ERROR: CLI execute error:(SQL0206N or SQL0408N) . Neither way works I know it is Friday ...end of the day, but....I am running code through SAS environment (IN data mart implemented in DB2), trying to get unique members with at least 2 claims on different dates /*---------------------------------------------------------------------------------------- 3590 Step 5a - Count at least 2 claims on diff...

Re: ERROR: CLI execute error:(SQL0206N or SQL0408N) . Neither way #2
Your code came across with lots of extra characters in it- but hopefully that has nothing to do with the problem. The problem is that you are mixing SAS SQL code and Pass-through SQL code- and you can't do that. The value not compatible has to do with attempting to convert the integer to a date- in pass-through DB2 SQL you'd have to convert it to a date using the DB2 DATE function. But with pass-through SQL you can't select from a SAS table- only from a DB2 table, thus you need insert statements, not SAS SQL. But can you define a libname instead for the DB2 data mart? Then you can use this approach: proc sql noprint; create table work.newdata as.... libname mydb2 .... data mydb2.newdata; set work.newdata; run; If you can't do that, then take one of these approaches to do pass-through SQL (this is Oracle, you'd have to convert to DB2 SQL). 1. Move append table to Oracle, then do Oracle Insert Here also is a pass-through solution; this is assuming that the user has access to their own schema, and insert rights to the tables on the master schema. This is Oracle pass-through but I imagine a similar approach could be had in SQL Server if the database administrator set up a Temporary database that users could create or delete tables in. SAS SQL also has a similar insert...select syntax like this one shown below, which is Oracle's. This would do a bulk-like load but preserves the indexes. libname myoracle oracle user=user1 password=passwo...

Re: ERROR: CLI execute error:(SQL0206N or SQL0408N) . Neither way #4
I think the problem is that the column clms_cnt in your target table is defined as "smallint". The result of the COUNT function is large integer. Change your "create table" to the following and see if it works: EXECUTE( create table &tmpschema..ckd ( Id char(29) , clms_cnt integer ) in "&twotblspc" not logged initially ) by HDMconnect; -----Original Message----- From: SAS(r) Discussion [mailto:SAS-L@LISTSERV.UGA.EDU] On Behalf Of Irin later Sent: Friday, March 06, 2009 12:52 PM To: SAS-L@LISTSERV.UGA.EDU Subject: ERROR: CLI execute error:(SQL0206N or SQL0408N) . Neither way works I know it is Friday ...end of the day, but....I am running code through SAS environment (IN data mart implemented in DB2), trying to get unique members with at least 2 claims on different dates /*---------------------------------------------------------------------------------------- 3590 Step 5a - Count at least 2 claims on different dates 3591 ---------------------------------------------------------------------------------------- 3591! ---*/ 3592 EXECUTE( 3593 create table &tmpschema..ckd 3594 ( Id char (29) 3595 ,clms_cnt smallint 3596 ) 3597 in "&twotblspc" 3598 ...

Cli error with imap_open()
Hi, I've written a script that use the imap functions to check my accounts for new messages. It works great from a server, but when trying to run it from the command line I get the following error: Fatal error: Call to undefined function: imap_open() I'm on osX 10.4.8 with the Marc Liyanage php5 package from http://www.entropy.ch/software/macosx/php/. "php -v" outputs: PHP 4.4.4 (cli) (built: Nov 1 2006 18:12:33) Copyright (c) 1997-2006 The PHP Group Zend Engine v1.3.0, Copyright (c) 1998-2004 Zend Technologies Solved it. Changing the path to the php cli did the tri...

Error directing BCP In errors to error file
Greetings, I am trying to bcp in data to a table which is in different server . Though the bcp in works fine but the error file is not being created and rejected records are not being directyd to the error file. Query looks like: bcp <db>..test_b_plan_cp in /home/file_out.txt -c -t '|' -S *****-U ****** -P ******-I /home/bcp2db_sql.ini -e /home/bcp2db.error. Can someone please help? TIA. Regards, Rajpreet ...

(assert-error) tests errors and error messages
I wrote (assert-error) to make sure that a function generates an error, and verify the error message. What do you think? Below is the definition and a few test cases, for Emacs 22.1.50. (require 'cl) (defmacro assert-error (form &optional regexp) "FORM must signal an error. Signal an error otherwise. Additionally, the error message must match REGEXP. Case is ignored while matching REGEXP." (let ((msg (make-symbol "msg")) (ok (make-symbol "ok")) (res (make-symbol "res"))) `(let ((,ok nil)) (condition-case err ;; Evaluate FORM and save the result. (set ',res ,form) (error ;; This runs when FORM signals an error of any kind. (set ',ok t) (set ',msg (error-message-string err)))) (unless ,ok (error "Did not signal an error: %s (returned %s)" ',form ,res)) (when ,regexp ;; Here we know that FORM signaled an error, and that the ;; caller wants to check the error message. (unless (let ((case-fold-search t)) (string-match ,regexp ,msg)) (error "Error message does not match \"%s\": \"%s\"" ,regexp ,msg)))))) ;; Test assert-error, mostly by running it against itself. (assert-error (assert-error nil) "did not signal.*nil") (assert-error (assert-error t) "\\bt\\b") (as...

Re: Segmentation error: was: SAS Error Message
Short answer: this probably is not a problem with SAS. Segmentation errors usually arise when there is a bug in the program. Have you run the shell script from an interactive session to verify it works? Are you either writing the shell script, or writing a parameter file for the shell script from within your SAS session? If so, look again at the syntax of the created script or inclusion file. Usually, these errors occur where array references are out of bounds or use pointers that are corrupt or uninitialised. Modifying your shell script with a series of PrintF() statements will help y...

Error 8 Compilation Error. File permission error or DMA hardware error detected
I just upgraded my Labview code to Labview 8.5 from LV8.2.1 Then I tried to compile&nbsp;my code to get an .exe file I keep getting the following error, &nbsp; Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference: Error 8 occurred at Write to Text File in AB_Engine_Update_INI_Header.vi-&gt;AB_Application.lvclass:Create_INI_File.vi-&gt;AB_Application.lvclass:Copy_Files.vi-&gt;AB_Build.lvclass:Build.vi-&gt;AB_EXE.lvclass:Build.vi-&gt;AB_Build.lvclass:Build_from_Wizard.vi-&gt;AB_UI_FRAMEWORK.vi-&gt;AB_Item_OnDoProperties.vi-&gt;AB_Item_OnDoProperties.vi.ProxyCaller Possible reason(s): LabVIEW:&nbsp; File permission error. You do not have the correct permissions for the file.=========================NI-488:&nbsp; DMA hardware error detected. C:\UserData\LabView\IFX Interop Test exe\GMXiTest.ini &nbsp; I never have this problem if I compile using LV8.2.1. Please help! Thanks. &nbsp; hi there just to be sure: has 8.5 been installed under an other account than yours? make sure you have the windows access rigths to the LabVIEW - folder. Hi, Yes I have administrator rights on the PC. It was installed with full R/W permission. I saw in the forum that others are having the same problem and tried this work-around mentioned but it did not work. <a href="http://forums.ni.com/ni/board/message?board.id=170&amp;message.id=172537&amp;query...

@@Error not catching error.
Hi all, I want to catch error in stored procedure and return error message. I want to catch error 'Syntax error converting the varchar value 'a' to a column of data type int.' Means error occuring if i enter wrong value. Say suppose i have statment like select * from emp where rowid = 'a' PRINT @@ERROR print 'reach' here rowid is integer value so i am getting above mention error. So what i am expecting is it should print error and then print 'reach' which is not happening. can anyone tell me reason behind this and how to overcome this problem. than...

error: error sending
Hi, I hope somebody can help me. For sending mail I configured alpine with the following line: smtp.web.de/tls/user=xxxxxxx@web.de . But every time I tried the message "error sending" occured. To figure out more details I added the parameter debug, but there was no file .pine-debug. After reading the manual I tried: alpine -d 5 and got the message: Argument Error: unknown flag "d", debugging not compiled in Before downloading the source and compile it by my self, I thought I should ask you guys for help. My pine version: alpine-2.00-5.fc11.i586 Best regards Chris...

error with ERROR function
Hi all, I'm getting an error when I use the "error" function. Here is the error message: ---------------------------------------- ??? Index exceeds matrix dimensions. Error in ==> C:\MATLAB6p5p1\mese\user_functions\ssave.m On line 765 ==> error('ERROR e43: Initial Operating Point file cannot be found'); ---------------------------------------- What matrix is it refering to? thanks, SK "Saif K" <buckeyeforever2001@yahoo.com> wrote in message news:eee53de.-1@webx.raydaftYaTP... > Hi all, > > I'm getting an error when I use the &quo...

Error upon Error...
anyone seen this error before: > Can't load '/usr/local/lib/perl5/5.8.0/PA-RISC2.0/auto/DB_File/DB_File.sl' for module DB_File: No such file or directory at /usr/local/lib/perl5/5.8.0/PA-RISC2.0/XSLoader.pm line 83. > at /usr/local/lib/perl5/5.8.0/PA-RISC2.0/DB_File.pm line 236 I'm just trying to run this script: #!/usr/bin/perl -w use strict; use DB_File; print "Hello World!\n" all three of the files exist on the system....why is it saying this. (there are a few scripts that I have that want to use DB_File and they all say this.... that's why I j...

SQL Errors: Where is the error?
I have just finished -- I hope I have finished -- some changes to one program of mine that has some hairy SQL. One of the SQL statments is 40 lines long. Granted it could be shorter vertically, but it is still 852 characters long. Occasionally -- read "All too often" -- while wrestling with this program, there would be an error in my SQL syntax. VFP is not terribly helpful with such error messages as Syntax error. Command is missing required clause. These are not terribly useful. Sometimes, I have hunted for minutes before realising that...

CLI cursor fetch error
Morning, guys, When I remote submit a SAS program (in which I connect to DB2 tables), an error comes out for one dataset I try to create. It doesn't happen everytime, but it got me so frustrated. Please advise. Thanks, Wade ERROR: CLI cursor fetch error: [IBM][CLI Driver] A communication error has been detected. Communication protocol being used: "TCP/IP". Communication API being used: "SOCKETS". Location where the error was detected: "IP address". Communication function detecting the error: "recv". Protocol specific error code(s): &quo...

ERROR [HY000] [Informix][Informix ODBC Driver]General error
I have this tables: create table 'informix'.corporatemenuelements ( menuid NVARCHAR(128) not null, caption NVARCHAR(255), type NCHAR(1), address NCHAR(2048) ) extent size 32 next size 32 lock mode row; alter table 'informix'.corporatemenuelements add constraint primary key (menuid) constraint pk_corporatemen269; from .net with odbc data provider i try: String sql =3D "INSERT INTO CorporateMenuElements (MenuId, Caption, Type, Address) VALUES (?, ?, ?, ?)"; DbCommand cmd =3D DB.GetSqlStringCommand(sql); DB.AddInParameter(cmd, "MenuId", DbType.String, menuId); DB.AddInParameter(cmd, "Caption", DbType.String, caption); DB.AddInParameter(cmd, "Type", DbType.String, type); DB.AddInParameter(cmd, "Address", DbType.String, address); Int32 mustBeOne =3D DB.ExecuteNonQuery(cmd); I get: System.Data.Odbc.OdbcException was unhandled Message=3D"ERROR [HY000] [Informix][Informix ODBC Driver]General error." Source=3D"iclit09b.dll" ErrorCode=3D-2146232009 StackTrace: en System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) en System.Data.Odbc.OdbcConnection.Open_EnlistTransaction (Transaction transaction) en System.Data.Odbc.OdbcConnectionOpen.EnlistTransaction (Transaction transaction) en Sys...

Error: An error occurred while shelling out to mbuild (error code = 1).
Hi! I'm trying to create an exe file from my GUI, so that the GUI can be run on computers not having MATLAB. I'm using MATLAB 7.9.0(R2009b) and the Compiler version is 4.11(R2009b). I receive the following error message when using deploytool: mkdir 'C:\Documents and Settings\Paulo\Meus documentos\MATLAB\test_deploy\distrib' Warning: Directory already exists. mkdir 'C:\Documents and Settings\Paulo\Meus documentos\MATLAB\test_deploy\src' Warning: Directory already exists. mcc -F C:\Documents and Settings\Paulo\Meus documentos\MATLAB\test_deploy.prj mcc -o 'test_deploy' -W 'WinMain:test_deploy' -d 'C:\Documents and Settings\Paulo\Meus documentos\MATLAB\test_deploy\src' -T 'link:exe' -v 'C:\Documents and Settings\Paulo\Meus documentos\MATLAB\test_deploy.m' Compiler version: 4.11 (R2009b) Processing include files... 2 item(s) added. Processing directories installed with MCR... The file C:\Documents and Settings\Paulo\Meus documentos\MATLAB\test_deploy\src\mccExcludedFiles.log contains a list of functions excluded from the CTF archive. 2 item(s) added. Generating MATLAB path for the compiled application... Created 40 path items. Begin validation of MEX files: Wed Sep 08 17:59:41 2010 End validation of MEX files: Wed Sep 08 17:59:41 2010 Parsing file "C:\Documents and Settings\Paulo\Meus documentos\MATLAB\test_deploy.m" (Referenced from: "Compiler Command Line"). Pars...

Web resources about - ERROR: CLI describe error: [IBM][CLI Driver][DB2/LINUXX8664] - comp.soft-sys.sas

Resources last updated: 3/17/2016 2:49:57 PM