f



Re: DICTIONARY.TABLES #2

libnames are stored in UPPERCASE in dictionary.tables.

On 10/25/07, SAS-FU <lee.rozzelle@gmail.com> wrote:
> Any ideas why this simple code to access dictionary metadata is
> returning 0 observations?  I do this all the time, and Im at a new
> contract site and I feel like im taking crazy pills.
>
> Thanks in advance.
>
>
> libname q 'R:\AD-HOC\MAX_Data\DEMO';
>
> proc sql;
> create table aaa as
> select memname
> from dictionary.tables
> where libname = 'q';
> quit;
>
0
datanull (3025)
10/25/2007 3:10:31 PM
comp.soft-sys.sas 142828 articles. 3 followers. Post Follow

0 Replies
344 Views

Similar Articles

[PageSpeed] 39

Reply:

Similar Artilces:

Re: TABLES TABLES TABLES #2
OHHH went there, did that, got the t-shirt, even. I tried everything in the book. This person is extremely LITERAL and looking for the letter of the law, or something........maybe my trying so hard just egged him on, or his stubbornness that kept his feet in concrete, but I don't think so. He truly believes that. -----Original Message----- From: David L Cassell <davidlcassell@MSN.COM> To: SAS-L@LISTSERV.UGA.EDU Sent: Sun, 27 Nov 2005 11:55:12 -0800 Subject: Re: TABLES TABLES TABLES sasbum@AOL.COM wrote: >How would you best describe to a retiscent SAS student that the concept...

Re: suggest: improve SAS Deployment Wizard for SAS v9.2, phase 2 #2
> From: A Little Birdie > > I just searched the SAS-L archives (should have done that > first) and found references to these two pages: > > http://www.sascommunity.org/wiki/Category:V9.2_Phase_2 > > http://www.sascommunity.org/wiki/V9.2_Phase_2_install_guide > > Have you seen this page? > ***************************************************** > http://support.sas.com/kb/35/631.html <---<<< NICE! ***************************************************** > It looks like it addresses your needs, and might be something > nice to add to the SASCo...

Re: Problem with dictionary.tables #2
proc sql noprint; select 'Perm.'||memname into :dsn separated by " " from dictionary.tables where libname = "PERM"; quit; data result; set &dsn ; run; Toby Dunn From: "antje.schuele@googlemail.com" <antje.schuele@GOOGLEMAIL.COM> Reply-To: "antje.schuele@googlemail.com" <antje.schuele@GOOGLEMAIL.COM> To: SAS-L@LISTSERV.UGA.EDU Subject: Problem with dictionary.tables Date: Mon, 26 Jun 2006 08:09:13 -0700 Dear Newsgroup, I'd like to set a few tables together. That's why I read out my needed tabl...

Re: SAS Table help #2
Monti, Either Ian, I, or both of us have misunderstood what you might be looking for. If your data show the number of missing data elements, by product type, then I think you want something like the following: data have; input Product $ ItemA ItemB ItemC ItemD ItemF; cards; A 1 . 2 9 . B 2 2 0 3 9 C 6 5 9 . 8 D 5 . 5 7 8 E 5 . 2 8 . F . 2 3 6 7 G . 8 2 . 5 H 5 . . 8 1 ; data temp; set have ; nmiss = sum (of item: ) ; run; proc sql; create table want as select product,nmiss,100*nmiss/sum(nmiss) as pct_of_total from temp; quit; HTH, Art --------- On Mon, 2 Feb 2009 13:14:41 -0800, Mahbub Khandoker <mk_sas1@YAHOO.CA> wrote: >Hi there, >I am very new to SAS. I want to create a table from SAS database which includes statistics for all the missing data elements by product type. >The database looks like as follows, >� >Product����������� ItemA�� ItemB ItemC ItemD ItemF >A�������������������� 1��������� ����������� 2��������� 9��������� >B��������������������� 2��������� 2��������� 0��������� 3��������� 9 >C�������������������� 6��������� 5��������� ����������� 9.�������� 8 >D�������������������� 5��������� ����������� 5��������� 7��������� 8 >E��������������������� 5��������� ����������� 2��������� 8��������� >F��������������������� ����������� 2��������� 3�...

Re: Lookup Table in SAS #2
On Fri, 29 Aug 2008 20:42:06 -0400, Nat Wooding <Nathaniel.Wooding@DOM.COM> wrote: >Jerry > >There are a couple ways to do this in SAS. One is to create a "user defined >format" and use a put statement to create a new variable based on the value >of an existing variable and the format that you created. See the SAS >documentation on Proc Format and the Put function. Note that the values >that are used in building this format may be manually typed or may be read >from a SAS data set. > >A second way is to merge the two tables and, based on whether there are >matches between the two tables, the flag may be set with program >statements. The following illustrates this approach. > >Data a; >input values $1. ; >cards; >a >b >c >d >e >; > > >Data b; >informat data2 $10.; > >input values $1. data1 data2 ; >cards; >b 1 something >x 2 random >k 3 new >proc sort; > by values;* this solution requires that the two data sets be sorted. >The format solution does not require sorting; >run; > >Data final; > merge b (in = in1 ) a (in=in2); > by values; > if in1;* select only datalines that exist in b; > if in2 then flag = 1; > else flag = 0;* see sas data set options discussion; >proc print; >run; > >Nat Wooding >Env...

Re: SAS 9.2 Phase 2 #2
That is correct -- Phase 2 updates the "Foundation" products (Base SAS, SAS= /GRAPH, etc.), and also I believe is the first release for BI and some othe= r server-based products like that. (We don't license these, so I haven't lo= oked into this in detail.) My understanding is also that the "foundation" p= roducts must be completely reinstalled going from Phase 1 to Phase 2. If your bug is in the Problem Notes, you might be able to check there to se= e whether it is corrected in Phase 2. Mike Rhoads RhoadsM1@Westat.com -----Original Message----- From: D T [mailto:sasandstats@live.com] Sent: Thursday, March 26, 2009 9:33 AM To: Mike Rhoads; sas-l@listserv.uga.edu Subject: RE: [SAS-L] SAS 9.2 Phase 2 Is SAS 9.2 phase 2 the update to the first version of 9.2? I am waiting for= the update since there is supposed to be a correction to a bug within the = survey procedures ... can you confirm this? Also, if that's correct, how do= you get it? I couldn't find an announcement on the SAS website ... Thanks! D. > Date: Thu, 26 Mar 2009 08:23:27 -0400 > From: RHOADSM1@WESTAT.COM > Subject: Re: [SAS-L] SAS 9.2 Phase 2 > To: SAS-L@LISTSERV.UGA.EDU > > It is now shipping, at least in the U.S. as of last week, or so I've been= told from reliable sources. (I'm a little surprised they didn't make a big= ger deal of it at the conference.) > > I don't know about abroad. I've heard that new releases can be...

Re: Table of tables #2
On 10/21/10 at 7:01 AM, luiz.melo@polymtl.ca (Luiz Melo) wrote: >I'm actually looking for a function that operates only on the third >row of each column-matrix terms(which happen to be complex in the >example I gave), but leaves the other terms intact. Consider a >different example: >Let t = {{{-1, -1, -2}, {-1, -1, -3}}, {{-1, -1, -4}, {-1, -1, >-5}}}; >how can I get >{{{-1, -1, 2}, {-1, -1, 3}}, {{-1, -1, 4}, {-1, -1, 5}}}; >that is, in this case, I need a function that takes the Abs[] of the >3rd row of each sub-matrix and leaves the oth...

Re: SAS 9.2 Update on problem re Help files #2
SNOTES is an approximately daily email from SAS STech Support listing the new or changed usage notes since the last email. So the item pertaining to you was: 32792 - SAS prompts you to rebuild the index when you press F1 to request help while running a SAS procedure in SAS 9.2 Release(s) Reported: 9.2 Release(s) Fixed: Date Created: 28JUL2008 Date Last Updated: 11AUG2008 http://support.sas.com/kb/32792.html To subscribe, go to http://support.sas.com/techsup/news/snotes.html You'll get an extra email on most workdays, but if you subscribe to SAS-L you'll hardly notice one more. There's also http://support.sas.com/techsup/news/tsnews.html It has news about tech support office hours and a few other things. If you want even more news, and you have an RSS reader, you can go to http://support.sas.com/community/rss/index.html On Mon, 25 Aug 2008 11:10:05 -0400 (GMT-04:00), "Peter Flom" <peterflomconsulting@mindspring.com> said: > Hi Jack > > I don't think I've ever looked at tech support notes ..... where is it? > Is it useful for browsing? > > Peter > > -----Original Message----- > >From: Jack Hamilton <jfh@alumni.stanford.org> > >Sent: Aug 25, 2008 11:08 AM > >To: Peter Flom <peterflomconsulting@mindspring.com>, "sas-l@listserv.uga.edu" <SAS-L@LISTSERV.UGA.EDU> > >Subject: Re: [SAS-L] SAS 9.2 Updat...

Re: Summary: Re: Table combining tables? PROC FREQ or maybe #2
I've now got several solutions.... SAS-L is great! But the odd behavior of Howard's program on two datasets that ought to have been the same is still puzzling. Hari Nath <hari_s_nath@YAHOO.COM> wrote > >The log might help us see whats going on.....But for now, you can check by >running a summary of your raw data.... > >proc summary data = today ; > class prop_part ; > var v3_1 -- v3_15 ; > output out = tot sum = ; >run ; > >proc print data=tot ; >run ; > >From the 'tot' dataset, look in _type_ = 0, which is the sum of all >variables. If this sum matches the proc freq output which you showed >below, then it may be a data issue. If not, then looking at the log might >help...... > > The _type_ = 0 did not match the weird FREQ output that I had gotten. So, here's the log from running Howard's program on my data. I don't know if it will help. <<<<< 219 220 data numbered; number + 1; set today3; run; NOTE: There were 609 observations read from the data set WORK.TODAY3. NOTE: The data set WORK.NUMBERED has 609 observations and 25 variables. NOTE: DATA statement used (Total process time): real time 0.03 seconds cpu time 0.03 seconds 221 222 proc transpose data=numbered out=long; 223 by number prop_part; 224 var v3_ : ; 225 run; NOTE: Numeric variables in the input data set will be converted to character in the out...

Re: SAS Sample 1728 Was ---> Re: SAS Sample 1727 #2
Graham , I am not sure that the SI Tech Support examples should have all the error checking that Chang wanted to throw in the macro. The examples should be clear concise and easy to read and get going, as well as be illistrative. Too much error checking in an example well is just over kill and even detrimental to an example. However, any code solution on the SI Tech Support web sit should follow basic rules of good practices and sound advice. Such as with thier macros having atleast a somewhat good Macro design. Look at Example SAS Sample 1728: The first method well lets say is soooo bad...

Re: SAS/DB2 table joins #2
Martin: INSERT, UPDATE, and DELETE operations that trigger key integrity constraints and rollback tend to run very slowly on RDBMS's. I believe that DB2 has a bulk load option (but can't give you the exact syntax since I don't have SAS/ACCESS for DB2 licensed here). We add BCP=YES BCP_ERRORFILE="<directory path>" to a MS SQL Server connection string. The bulk load process writes transactions that violate DB key or other integrity constraints to the error file. The bulk load option usually lets inserts run many times faster. S -----Original Message----- From: owner-sas-l@listserv.uga.edu [mailto:owner-sas-l@listserv.uga.edu] On Behalf Of O'Connell, Martin Sent: Monday, April 21, 2008 12:11 PM To: SAS-L@listserv.uga.edu Subject: SAS/DB2 table joins Hello all, I'm building a sas app that needs to join a sas dataset on sas app server to a db2 table on database server. I have a macro to push the sas table into a temp db2 table before joining to permanent db2 table. It does this by constructing code such as: execute(declare global temporary table sectordriver( prfl_cmpny_cd character(10) ,prfl_st_cd character(2) ,prfl_cvrg_cd character(10) ,prfl_lob_cd character(10) , cmpny_cd character(2) ,rtd_st_cd character(2) ,s160_cvrg_cd character(3) ,prm_lob_cd character(3) , sgmt_cd character(2) ,sb_sgmt_cd character(2) ,yrs_insrd_grp_cd character(4) ,rtd_pstl_prmry_cd character(5) , rtd_trtry_cd character(3) ,yrs_insrd_10 integer ) with replace on ...

Re: strange error from dictionary tables #2
Dear SAS-L-ers, Shankar posted the following: > hi all, I ran into an unexpected error with use of dictionary tables; > > This is a sample of the code I am using: > > proc sql noprint; > select name into: list_columns > separated by ' ' > from dictionary.columns > where upcase(libname)='WORK' > and upcase(memname)='RATES' > > ; > quit; > > This code is run as part of a daily batch process; The batch > generates hundreds of data sets and some of them are...

Re: Help with SAS Hash Tables #2
Mark: Try adding a sequential number to your dataset and defining a composite key, "n","SUID". S -----Original Message----- From: owner-sas-l@listserv.uga.edu [mailto:owner-sas-l@listserv.uga.edu] On Behalf Of mschult@bu.edu Sent: Thursday, February 28, 2008 11:22 AM To: sas-l@uga.edu Subject: Help with SAS Hash Tables I just discovered the SAS Hash table facility and it seems to solve a common problem rather elegantly. Problem is, I can't get it to work. It seems to throw away some of the data. Any help would be appreciated. Mark Here's my code and an example file: libname foo ACCESS "c:\f1.mdb"; data A; set foo.ICD; run; proc sort data=A; by SUID; run; data B; set A; * build the hashtable associated with primary record here; length SUID 8; length OTHRDX $6; if _N_ = 1 then do; /* load data set into hash object */ declare hash h1(dataset: "work.A", hashexp: 6, ordered: 'yes'); h1.defineKey('SUID'); h1.defineData('SUID','OTHRDX'); h1.defineDone(); /* define an iterator on this hash table */ declare hiter myiter('h1'); end; rc = myiter.first(); do while (rc = 0);/* iterate through secondary ID file */ put SUID=; rc = myiter.next(); end; run; Contents of ACCESS table SUID OTHRDX 100,"764.01" 100,"36.10" 100,"68.51" 200,"38.14" 200,"410.01"...

Re: suggest: improve SAS Deployment Wizard for SAS v9.2, phase 2
Subject: Re: v9.2 phase 2, page update "Make the installation of SAS BI Server easier!" .... Ok w/me! Just remember that the majority of us are still just installing only SAS Foundation v9.2, and possibly Enterprise Guide v4.2 My rant/suggestion to Tech Support has been addressed. I have added notes about my conversation with Tech Support to this sas community wiki page: http://www.sascommunity.org/wiki/V9.2_Phase_2_install_guide summary: if you have Build # greater than or equal to 28 then you can dispense with ForceInstall. Ronald J. Fehd, IT Spec HelpDesk Level 3: SAS CDC S...

Re: Running SAS jobs sequentially in batch mode
> Note that unless you clean up work datasets and any macro variables created by each production job, subsequent jobs will not be starting in a pristine environment. It may be a good idea to include a new program between each production job to kill all work datasets and query sashelp.vmacro to create %symdel statements to delete macro variables. Would you be kind enough to give sample statements to do the CLEANING and KILLING? Susie Li TV Guide 1211 Avenue of the Americas New York, NY 10036 Tel 212.852.7453 Email susie.li@tvguide.com -----Original Message----- From: SAS(r) Discussion [m...

Re: SAS/DMS library default library allocations using SAS V8.2 on #2
The library allocations have to be stored <somewhere>, otherwise you wouldn't continue to get the prompt. You can look under your userid to see if it's there (though I suspect you've already done that), but a better question would be directed at the SAS sysadmin--ask them where these profiles/customizations are stored (the sasuser.profile is the generic one--your personal one is concatenated along with it). You may be able to see your session info under your userid tso log (shows usage information), though off the top of my head I can't remember if it captures al...

Re: Outputting SAS tables into notepad with positions #2
you may use column or formatted output (the PUT stmt, reverse of INPUT stmt) data _NULL_; set sasdata; file "path\file"; put @1 code1 $6. @7 code2 $20. the $ indicates character data (since you do say "characters". If, say, code1 were numeric: @1 code1 6. there are _lots_ of SAS formats that control the display of data. ---- Original message ---- >Date: Fri, 13 Mar 2009 09:31:30 -0700 >From: Styrmir <styrmirg@GMAIL.COM> >Subject: [SAS-L] Outputting SAS tables into notepad with positions >To: SAS-L@LISTSERV.UGA.EDU > >Hi everybody > >I recently started working with SAS which means I am by no means an >expert. I have a questions about something I have been struggling with >today at work. > >I have a table which I need to output to a text file (notepad). The >recipient of the file has made some requests which I have completed. >Except one. They have asked for a special position where each column >should start. Like column 1 should be 6 character long and start in >position 1, next column should be 20 character long and start in >position 7 etc. The variables in column 2 only contain 16 characters >which means there should be 4 spaces between column 2 and 3 since >column 2 is 20 character long. > >Can anyone tell me how I output the table with those positions? It >shouldnt be too hard but still I struggle with it. > >Thanks in advance. ...

Re: SQL-Like Permissioning On SAS Tables #2
No--I'm saying use the OS to control who can read the underlying files. That seems less hokey than trying to keep a shared password secret... -----Original Message----- From: Gerry [mailto:gpauline@pace.edu] Sent: Wednesday, September 12, 2007 12:38 PM To: Pardee, Roy; SAS-L@LISTSERV.UGA.EDU Subject: RE: SQL-Like Permissioning On SAS Tables Roy: First, thank you for taking the time to respond. If I understand correctly what you are saying, a "read" password on the SAS dataset, doesn't this mean that all of the users of a particular SAS dataset would use the same password ? Or can a SAS dataset have more than one read password ? -Gerry -----Original Message----- From: SAS(r) Discussion [mailto:SAS-L@LISTSERV.UGA.EDU] On Behalf Of Pardee, Roy Sent: Wednesday, September 12, 2007 3:12 PM To: SAS-L@LISTSERV.UGA.EDU Subject: Re: SQL-Like Permissioning On SAS Tables Well--there's always read file perms on the individual sas files. Another way to go would be to run the data through temp sas files on the way into mssql & assign your perms there. HTH, -Roy -----Original Message----- From: SAS(r) Discussion [mailto:SAS-L@LISTSERV.UGA.EDU] On Behalf Of Gerry Sent: Wednesday, September 12, 2007 9:59 AM To: SAS-L@LISTSERV.UGA.EDU Subject: SQL-Like Permissioning On SAS Tables SAS-Pros: I know that SAS datasets can be password protected, but is there a way to assign permissions by user to one or more specific tables in a library like one would do in S...

Re: Odds ratios for 2xk table in SAS #2
Thanks, Peter. I ran proc logistic with weights (cell counts) attached to the 6-level variable, and I got the ORs that I calculated by hand! Rieza (Sorry for x-posting) On Sep 23, 12:37 am, rsoelae...@GMAIL.COM (Rieza H Soelaeman) wrote: > Thanks, Peter. > > I ran proc logistic with weights (cell counts) attached to the 6-level > variable, and I got the ORs that I calculated by hand! > > Rieza > (Sorry for x-posting) Hi, I believe there is also an odds ratio option in proc FREQ. Would this be equivalent to the above or is it not the same? I can see the ability toname the base level would be useful to prevent ordering errors. BTW my table is 2xk where k is approx 1400. (I was assuming I would use my 1400-dim in a by statement, but I didn't look up the details yet... Hey it is the weekend ;-) ) thanks, DaveG On Sep 23, 12:37 am, rsoelae...@GMAIL.COM (Rieza H Soelaeman) wrote: > Thanks, Peter. > > I ran proc logistic with weights (cell counts) attached to the 6-level > variable, and I got the ORs that I calculated by hand! > > Rieza > (Sorry for x-posting) Hi, I believe there is also an odds ratio option in proc FREQ. Would this be equivalent to the above or is it not the same? I can see the ability toname the base level would be useful to prevent ordering errors. BTW my table is 2xk where k is approx 1400. (I was assuming I would use my 1400-dim in a by statement, but I didn't look up the details yet... Hey it is...

Re: Rearrange columns in a SAS data table? #2
Question is: why would you do this? For a report it does not matter. If you want to have a quick look on it with FSV, you can move the columns temporarily. So why? On Tue, 23 Sep 2003 12:36:08 -0400, Patrice Bourdages <Patrice.Bourdages@IAAH.CA> wrote: >There is a few things you can do... > >I usually use the "RETAIN" statement in order to arrange the columns in a >familiar or more appropriate order like the following: > >data NewData; > retain Category Age Gender; > set OldData (keep = Gender Category Age); >run; > >That should...

Re: SAS Code for Cell Suppression in tables #2
I think the issue is *which* cells to suppress. It's the secondary suppression (which prevents a suppressed cell from being "backed out" by subtracting the remaining detail from a total) that gets complicated. On Thu, 8 May 2008 08:21:29 -0400, Gerhard Hellriegel <gerhard.hellriegel@T-ONLINE.DE> wrote: >One possibility might be a view. > >data test / view=test; > set sashelp.class; > if weight>100 then sex="-"; >run; > >Is that something like you want? >However, a problem might be the accessability of the base data. For that >you could use a read-pw and add that to the view: > >data xx(read=secret); > set sashelp.class; >run; >data test / view=test; > set xx(read=secret); > if weight>100 then name="********"; >run; > >Gerhard > > > > > >On Thu, 8 May 2008 04:50:28 -0700, JohnH <john.c.hennessey@SSA.GOV> wrote: > >>We produce tables for the public which contain counts of people in >>certain categories. For privacy reasons, we must suppress cells that >>have small counts. Then, a secondary round of cell suppression takes >>place. For those who have cell suppression issues, I am sure you >>understand the details. Does anyone know where I can obtain SAS code >>which will take a table of counts and, with certain parameters set, >>apply cell suppression techniques to the table? On May 8, 9:55=A0am,...

Re: Status of EG 4.2 and SAS 9.2 #2
This is truly shocking and sad. My guess is serious metadata migration issues are holding the "phase 2" release with the massive redesign of the metadata server... I really want this release for the production statistical graphics (we are server based with EG usage, so 9.2 won't work yet) and the new EG interface. Thanks for the replies so far, hoping someone else can provide a solid answer, but maybe there isn't one? Regards, Stephen On Fri, Sep 26, 2008 at 5:26 PM, Jack Hamilton <jfh@stanfordalumni.org>wrote: > It's been delayed so many times that everyone has given up predicting. > > -- > Jack Hamilton > jfh@alumni.stanford.org > Videtis illam spirare libertatis auram > > > > > > > On Sep 26, 2008, at 3:03 pm, JH wrote: > > Nobody has a scoop on "Phase 2" of 9.2? I too am waiting b/c I need >> SAS/QC and we can't upgrade our server install until Phase 2 with 9.2 >> of /QC is out. >> >> What are the leaks about when we'll really see it? At SGF, I heard >> "Fall 08" and last I spoke with a birdie I heard "early 09". Anyone >> else more knowledgable? >> >> >> On Sep 25, 10:55 am, step...@STEPHENMCDANIEL.US (Stephen McDaniel) >> wrote: >> >>> Can anyone give me insight as to the release timing of SAS 9.2 >>> (Server) with >>> EG 4.2? This year, early next year, etc. ...

Re: Please share: Updated PC SAS 9.2 phase 1 to 9.2 phase 2 #2
Jerry: your comment about JBoss indicates you're doing a server install you want to choose: Select Deployment Type ( ) ... (*) Install Additional Software http://www.sascommunity.org/wiki/V9.2_Phase_2_install_guide check only these two Products (*) SAS Enterprise Guide ( ) SAS Formats library for Teradata (*) SAS Foundation Ron > -----Original Message----- > From: owner-sas-l@listserv.uga.edu > [mailto:owner-sas-l@listserv.uga.edu] On Behalf Of Jerry Davis > Sent: Thursday, May 14, 2009 4:12 PM > To: SAS-L@LISTSERV.UGA.EDU > Subject: Re: Please share: Updated PC S...

RE : Re: copulas and SAS #2
Thanks Rogerio, Do you have any examples with S+? Regards Adel rdporto1 <rdporto1@terra.com.br> a �crit : Adel, if what you want is a PROC like S+ copula functions, I don't think SAS has it yet. SAS uses a Normal copula in PROC MODEL but it doesn't do any goodness of fit test or similar. It seems that David will recomend some alternative approach but if you HAS TO use copulas, then you will have to program it. Best, Rogerio. ---------- Cabe�alho original ----------- De: "SAS(r) Discussion" SAS-L@LISTSERV.UGA.EDU Para: SAS-L@LISTSERV.UGA.EDU C�pia: Data: T...

Web resources about - Re: DICTIONARY.TABLES #2 - comp.soft-sys.sas

Dictionary - Wikipedia, the free encyclopedia
According to Nielsen (2008) a dictionary may be regarded as a lexicographical product that is characterised by three significant features: (1) ...

Dictionary.com Dictionary & Thesaurus goes 7.0 with interface improvements
In September, Dictionary.com Dictionary & Thesaurus was updated to version 6.0 with a significant redesign that introduced a fresh look and feel ...

Price Drop: Textkraft with German Dictionary
Textkraft with German Dictionary 3.1.3 Device: iOS iPad Only Category: Productivity Price: Free, Version: 3.1.3 ( iTunes ) Description: Das ...

'Rabid Feminist' and Other Sexist Sentences Should Be Excluded From the Oxford Dictionary ASAP
It's a source that's meant to inform and educate but the Oxford English Dictionary recently came under fire for being sexist. Michael Oman-Reagan, ...

'Mx.' instead of 'Mr.' or 'Mrs.?' It's in the dictionary now
Among the words officially added to dictionary.com this week is &quot;Mx.,&quot; pronounced &quot;mix&quot; and defined as &quot;a title of respect ...

'Identity' is Dictionary.com's word of the year - CNN.com
Race, sexuality and gender are the live-wire topics that inspired Dictionary.com to pick "identity" as its word of the year for 2015.

Jimmy Fallon, Nathan Lane play 'Kid Dictionary' on 'The Tonight Show' - EW.com
Jimmy Fallon, Nathan Lane play 'Kid Dictionary' on 'The Tonight Show' - EW.

The Original Hacker's Dictionary For Small Business Owners
A cybersecurity book and glossary for newbies and small business owners.

But That Isn't A Word: Oxford Dictionary Chooses The Face With Tears Of Joy Emoji As Word Of The Year ...
Because even dictionary companies want to feel edgy from time to time, Oxford Dictionaries has announced the 'face with tears of joy' emoji is ...

Athleisure Is Officially In the Dictionary, But What Does It Mean?
Come 2016, the eye roll-inducing label given to fashion's fascination with evolved workout layers will be added to the Merriam-Webster dictionary. ...

Resources last updated: 3/17/2016 5:46:27 PM