f



Re: help with reading ASCII data into SAS #3

ok, in that case u was too short:

data a;
  infile "c:\daten\test.dat" dlm="," truncover dsd firstobs=2;
  input
    site : 8.
 id   : 8.
 pid  : 8.
 it   : $5.
 dd   : ANYDTDTM20.
 itd  : 8.
 rtd  : 8.
 linkid : 8.
 sp   : 8.
 fc   : 8.
 dtc  : ANYDTDTM20.
 dtm  : ANYDTDTM20.
 u    : $15.
 ;
 u = compress(u,'""');
 it = compress(it,'""');
 format dtm dtc dd datetime20.;
run;

Gerhard


On Wed, 5 Nov 2008 10:20:47 -0800, olivesecret@GMAIL.COM wrote:

>Here is my code:
>
>   data data;
>    infile 'data.txt' delimiter=',' dsd firstobs=2;
>     input site id pid it $ dd itd rtd linkid sp fc dtc dtm u $5. ;
>run;
>
>Here is one more obs:
>
>1,4,1004,"JS",9/27/2008 0:00:00,1,1,57,11,10,10/3/2008
>11:31:17,10/3/2008= 11:31:17,"AVRC\psuggett"
>
>Other obs are similar.
>
>Thank you very much!
>
>
>
>On Nov 5, 12:24 pm, Nord...@DSHS.WA.GOV ("Nordlund, Dan (DSHS/RDA)")
>wrote:
>> > -----Original Message-----
>> > From: SAS(r) Discussion [mailto:SA...@LISTSERV.UGA.EDU] On
>> > Behalf Of olivesec...@GMAIL.COM
>> > Sent: Wednesday, November 05, 2008 8:50 AM
>> > To: SA...@LISTSERV.UGA.EDU
>> > Subject: Re: help with reading ASCII data into SAS
>>
>> > Yes, I did it with delimiter=',' dsd firstobs=2, but was told invalid
>> > data for each variable.
>> > Any more suggestions? Thanks a lot!
>>
>> You will need to show us the actual code you are using to read the file
if you want more than just a guess as to what went wrong.  Seeing the log
file with actual error message would be helpful as well.
>>
>> Dan
>>
>> Daniel J. Nordlund
>> Washington State Department of Social and Health Services
>> Planning, Performance, and Accountability
>> Research and Data Analysis Division
>> Olympia, WA  98504-5204
0
11/5/2008 6:47:59 PM
comp.soft-sys.sas 142828 articles. 3 followers. Post Follow

0 Replies
363 Views

Similar Articles

[PageSpeed] 18

Reply:

Similar Artilces:

Re: help with reading ASCII data into SAS
Secret... here a start try data a; informat dd dtc dtm anydtdtm17. ; infile cards dlm=',' dsd firstobs=2; input site id pid it $ dd itd rtd linkid sp fc dtc dtm u $5. ; cards; "Site","ID","PID","IT","DD","ITD","RTD","LinkID","SP","FC","DTC","DTM","U" 1,1,100,"DA",1/1/2008 0:00:00,1,1,1,1,10,1/1/2008 13:10:20,1/1/2008 13:10:20,"obd" ; run; proc print data=a; format dd dtc dtm datetime17.; run; but the limits are the length of the variables and those types as i have only one line of data and no other specification HTH Andre olivesecret@GMAIL.COM a �crit : > I will appreciate for any suggestions. The data is a txt file. The > first two observations of the data is: > > "=Site","ID","PID","IT","DD","ITD","RTD","Lin=kID","SP","FC","DTC","DTM","U" > 1,1,100,"DA",1/1/2008 0:00:00,1,1,1,1,10,1/1/2008 13:10:20,1/1/2008 > =13:10:20,"obd" > > Thanks a lot! > > -- Andr� WIELKI INED (Institut National d'Etudes D�mographiques) Service Informatique 133 Boulevard Davout 75980 Paris Cedex 20 m�l : wielki@ined.fr t�l : 33 (0) 1 56 06 21 54 ...

Re: Reading & Writing SAS data sets without SAS #3
Chang, You're correct in that a number of companies have done it. I believe SPSS can do it, WPS, Stat Transfer, dbmscopy, and perhaps others have also done it. But what I think is unique about this is that Alan is talking about offering plug-ins so you can roll-your-own so to speak. How cool would it be to have some type of driver/plugin for R? Phil Philip Rack MineQuest, LLC SAS & WPS Consulting and WPS Reseller Tel: (614) 457-3714 Web: www.MineQuest.com Blog: www.MineQuest.com/WordPress -----Original Message----- From: Chang Chung [mailto:chang_y_chung@HOTMAIL.COM] Sent: Monday...

Re: help with reading ASCII data into SAS #4
its not much information about your problem. Did you try it with something like: data a; infile "c:\daten\test.dat" dlm="," truncover; if _n_=1 then do input; delete; end; else input site : 8. id : 8. pid : 8. it : $5. dd : ANYDTDTM20. itd : 8. rtd : 8. linkid : 8. sp : 8. fc : 8. dtc : ANYDTDTM20. dtm : ANYDTDTM20. u : $5. ; u = compress(u,'""'); it = compress(it,'""'); format dtm dtc dd datetime20.; run; That seems to work for your example. Gerhard On Wed, 5 Nov 2008 07:45:07 -0800, olivesecret@GMAIL.COM wrote: >I will appreciate for any suggestions. The data is a txt file. The >first two observations of the data is: > >"=Site","ID","PID","IT","DD","ITD","RTD","Lin=kID","SP","FC","DTC","DTM"," U" >1,1,100,"DA",1/1/2008 0:00:00,1,1,1,1,10,1/1/2008 13:10:20,1/1/2008 >=13:10:20,"obd" > >Thanks a lot! ...

Re: help with reading ASCII data into SAS #2
> -----Original Message----- > From: SAS(r) Discussion [mailto:SAS-L@LISTSERV.UGA.EDU] On > Behalf Of olivesecret@GMAIL.COM > Sent: Wednesday, November 05, 2008 8:50 AM > To: SAS-L@LISTSERV.UGA.EDU > Subject: Re: help with reading ASCII data into SAS > > Yes, I did it with delimiter=',' dsd firstobs=2, but was told invalid > data for each variable. > Any more suggestions? Thanks a lot! > > You will need to show us the actual code you are using to read the file if you want more than just a guess as to what went wrong. Seeing the log file with actual error message would be helpful as well. Dan Daniel J. Nordlund Washington State Department of Social and Health Services Planning, Performance, and Accountability Research and Data Analysis Division Olympia, WA 98504-5204 Here is my code: data data; infile 'data.txt' delimiter=',' dsd firstobs=2; input site id pid it $ dd itd rtd linkid sp fc dtc dtm u $5. ; run; Here is one more obs: 1,4,1004,"JS",9/27/2008 0:00:00,1,1,57,11,10,10/3/2008 11:31:17,10/3/2008= 11:31:17,"AVRC\psuggett" Other obs are similar. Thank you very much! On Nov 5, 12:24 pm, Nord...@DSHS.WA.GOV ("Nordlund, Dan (DSHS/RDA)") wrote: > > -----Original Message----- > > From: SAS(r) Discussion [mailto:SA...@LISTSERV.UGA.EDU] On > > Behalf Of olivesec...@GMAIL.COM > > Sent: Wednesday, November 05, 2008 8:50 AM > > To: SA...@...

Re: help with reading ASCII data into SAS #5
Olive, Try: data a; infile "data.txt" dlm=',' dsd firstobs=2 lrecl=200; input site id pid it $ dd itd rtd linkid sp fc dtc dtm u $; informat dd dtc dtm anydtdtm19. ; format dd dtc dtm datetime21.; informat u $10.; format u $10.; run; HTH, Art -------- On Wed, 5 Nov 2008 11:36:20 -0800, olivesecret@GMAIL.COM wrote: >I tried Andre's code, that is, do not import data from the hard disc >by infile statement, but copy all the data directly to sas using >datalines. You know what? Now it works. So it means there is something >wrong when I use infile statement to import data from the hard disc. >Any suggestions? >Thanks a lot! > > > >On Nov 5, 1:57 pm, bigD <diaphanos...@gmail.com> wrote: >> Andre's code works for the example you gave .... >> >> On Nov 5, 1:20 pm, olivesec...@gmail.com wrote: >> >> > Here is my code: >> >> > data data; >> > infile 'data.txt' delimiter=',' dsd firstobs=2; >> > input site id pid it $ dd itd rtd linkid sp fc dtc dtm u $5. ; >> > run; >> >> > Here is one more obs: >> >> > 1,4,1004,"JS",9/27/2008 0:00:00,1,1,57,11,10,10/3/2008 >> > 11:31:17,10/3/2008= 11:31:17,"AVRC\psuggett" >> >> > Other obs are similar. >> >> > Thank you very much! >> >> > On Nov 5, 12:24 pm, Nord...@DSHS....

Re: help with reading ASCII data into SAS #6
I'm only reposting my suggestion, with changes (suggested by Andre offline), that are obviously needed for the code to work correctly. Specifically, I had moved the formats and informats to the end of the code (so as not to change the order in the PDF) but, as a result, made then ineffective. As such, my suggested code should have read: data a; informat dd dtc dtm anydtdtm19. ; format dd dtc dtm datetime21.; informat u $10.; format u $10.; infile "data.txt" dlm=',' dsd firstobs=2 lrecl=200; input site id pid it $ dd itd rtd linkid sp fc dtc dtm u $; run; Art -------- On Wed, 5 Nov 2008 20:38:24 -0500, Arthur Tabachneck <art297@NETSCAPE.NET> wrote: >Olive, > >Try: > >data a; > infile "data.txt" dlm=',' dsd firstobs=2 lrecl=200; > input site id pid it $ dd itd rtd linkid sp fc dtc dtm u $; > informat dd dtc dtm anydtdtm19. ; > format dd dtc dtm datetime21.; > informat u $10.; > format u $10.; >run; > >HTH, >Art >-------- >On Wed, 5 Nov 2008 11:36:20 -0800, olivesecret@GMAIL.COM wrote: > >>I tried Andre's code, that is, do not import data from the hard disc >>by infile statement, but copy all the data directly to sas using >>datalines. You know what? Now it works. So it means there is something >>wrong when I use infile statement to import data from the hard disc. >>Any suggestions? >>Thanks a lot! >> >> &g...

Re: How to filter sas data sets into separate sas data sets #3
Lizette, Instead of trying to merge the two data sets, I would probably try to create a SAS format from the values of VAR1 in data set 1. Then, NODE1, NODE2 and NODE3 could be compared against the format for a match. The example below is a simplified version of what you could do and shows a printout of how it works. It has 5 observations in data set 1 and only 3 variables in data set 2, but I think the logic should hold for the example you gave. After the example is code that could be used to actually split the data as you had requested. Hope this helps. * create sas data set 1 ; data ...

Re: Deleting SAS Data from a SAS DATASET #3
The disadvantages of using SQL delete are (1) NOBS= is no longer accurate, and (2) POINT= may behave unexpectedly. If those are not issues, then the delete would be faster, with or without an index, than recreating the data set (especially if the data set has indexes that would need to be rebuilt). -- Jack Hamilton jfh@alumni.stanford.org On Aug 15, 2008, at 11:17 am, Mary wrote: > One thing you might do is to add an index on the snap_dt to the > dataset; if that's there then you should be able to delete the > records in place: > > proc sql; > delete from prod.master_date; > where snap_dt = "&end_dt"d; > quit; > run; > > In both the ways you are trying now you are creating new data sets > rather than deleting records from the current data set; it would > seem to me that a SQL delete statement would be faster than creating > new datasets even if there isn't an index on the date. > > -Mary > ----- Original Message ----- > From: SUBSCRIBE SAS-L Chandra Gadde > To: SAS-L@LISTSERV.UGA.EDU > Sent: Friday, August 15, 2008 12:14 PM > Subject: Deleting SAS Data from a SAS DATASET > > > Hi All > > I have several SAS datasets that are very very big. (50GB of size). > Every > month, the data is being appended to these datasets. I need to > deleted the > data which is greater than 24 months. What is the best method to do > this? > Please help me. > ...

help with reading ASCII data into SAS
I will appreciate for any suggestions. The data is a txt file. The first two observations of the data is: "=Site","ID","PID","IT","DD","ITD","RTD","Lin=kID","SP","FC","DTC","DTM","U" 1,1,100,"DA",1/1/2008 0:00:00,1,1,1,1,10,1/1/2008 13:10:20,1/1/2008 =13:10:20,"obd" Thanks a lot! Can anyone help me? On Nov 5, 10:45 am, olivesec...@gmail.com wrote: > I will appreciate for any suggestions. The data is a txt file. The > first two observations of the data is: > > "=Site","ID","PID","IT","DD","ITD","RTD","Lin=kID","SP","FC","DTC","DTM","U" > 1,1,100,"DA",1/1/2008 0:00:00,1,1,1,1,10,1/1/2008 13:10:20,1/1/2008 > =13:10:20,"obd" > > Thanks a lot! imort the data as comma separated values. If it does not read the values properly, copy the log into the program window and edited it accordingly On Nov 5, 11:09=A0am, olivesec...@gmail.com wrote: > Can anyone help me? > > On Nov 5, 10:45 am, olivesec...@gmail.com wrote: > > > > > I will appreciate for any suggestions. The data is a txt file. The > > first two observations of the data is: > > > "=3DSite","ID","PID","IT","DD",&...

Re: read Access data in SAS #3
> -----Original Message----- > From: SAS(r) Discussion [mailto:SAS-L@LISTSERV.UGA.EDU] On > Behalf Of Little T > Sent: Thursday, October 11, 2007 8:14 AM > To: SAS-L@LISTSERV.UGA.EDU > Subject: read Access data in SAS > > Guys, I was given a Access data file to do some analysis. Can > anyone share your idea or code of how to read Access data in > SAS. Do I have to go into Access and export or do Import in SAS? I favor DDE. I prefer to list each variable, but my datasets are typically small or contain the same type of variables... Kevin Viel, PhD Post-doctoral ...

Re: Exporting a SAS data set to Text file on SAS unix #3
hi ... actually, what I posted earlier was too much code (sorry) this is enough (a bit more succinct) * variable names into a macro variable (tab separated); proc sql noprint; select name into :vars separated by '09'x from dictionary.columns where libname eq 'SASHELP' and memname eq 'CLASS' order varnum; quit; data _null_; file 'z:\class.txt' dsd dlm='09'x ; if _n_ eq 1 then put "&vars"; set sashelp.class; put (_all_) (:); run; -- Mike Zdeb U@Albany School of Public Health One University Place Rensselaer, New York 12144-3456 P/518-402...

Re: Reading SAS data sets on UNIX by non-SAS apps #2
John: Following on Richard's thoughtful suggestions, the Affinium system would likely capture data from csv files. SAS PROC EXPORT produces them quickly, and loading them into external systems works faster for relatively basic data structures and data formats, in my experience, than xml parsing. Sig -----Original Message----- From: SAS(r) Discussion [mailto:SAS-L@LISTSERV.UGA.EDU] On Behalf Of John Bentley Sent: Monday, October 18, 2004 10:10 AM To: SAS-L@LISTSERV.UGA.EDU Subject: Reading SAS data sets on UNIX by non-SAS apps I have SAS data sets on AIX that we need to read with Unica's Affinium campaign management software, also on a UNIX box. (Let's not get into why we didn't go with the SAS Solution.) SAS Institute doesn't supply an ODBC driver for the UNIX environment, and the Affinium implementors don't want to use the SAS SQL Library for C and or deal with APIs. Other that dumping the SAS data sets as flat files, can anyone suggest a solution? Thanks in advance for the help. ...

Re: What r the data types in SAS? in Base SAS , and SAS SQL
> From: Amar Mundankar > Sent: Tuesday, July 21, 2009 8:10 AM > To: sas-l@uga.edu > Subject: What r the data types in SAS? in Base SAS , and SAS SQL > > Hi all, > What are the different data types in Base SAS and SAS SQL?? character, lengths from 1 to 32,000+ numeric: lengths from 2 to 8 dates are a subtype of numeric and are identified by their date, datetime, or time formats the new proc TSPL (Table Server Processing Language) supports ANSI data types: bigint, tinyint, etc. http://support.sas.com/documentation/cdl/en/tsag/30878/HTML/default/a003 065339.htm http://s...

Re: MSWord, MailMerge, and reading SAS data #3
Scott, In addition to the excellent advice you've already received, you might want to look into the SAS Add-In for Microsoft Office. (e.g., see: http://support.sas.com/news/insider/msaddin.html ) Art -------- On Thu, 16 Jun 2005 02:48:06 +1000, Scott Bass <usenet739_yahoo_com_au@ALFREDO.CC.UGA.EDU> wrote: >Hi, > >Is there a way to have SAS data read into MSWord? Sort of like PROC >FSLETTER, but using MSWord instead. > >We have various reports written in Word, with statistics cut-and-pasted in. >It would be nice to automate that process, where those statistics...

Re: R vs. SAS (was Replacement for SAS (SPSS vs. SAS, redux)) #3
Wow, that was a leap. Better not use Apache or PHP then. Andy >-----Original Message----- >From: SAS(r) Discussion [mailto:SAS-L@LISTSERV.UGA.EDU] On >Behalf Of ben.powell@CLA.CO.UK >Sent: Thursday, February 05, 2004 10:37 AM >To: SAS-L@LISTSERV.UGA.EDU >Subject: Re: R vs. SAS (was Replacement for SAS (SPSS vs. SAS, redux)) > >Sounds like R is the SAS equivalent of Linux .. who are >incidentally in all >sorts of a copy left/right mess at the moment. > >On Thu, 5 Feb 2004 09:39:37 -0500, Peter Flom <flom@NDRI.ORG> wrote: > >>I use both SAS a...

Re: Can SAS read XML data with special missing values? #3
Larry, Actually, if the XML file arrives with the missing value codes (letters) as the content of the element, you don't even need an informat. It works fine as long as you specify the appropriate codes in a MISSING statement. The issue is that SAS doesn't write special missing values out this way when using the XML engine. Instead, it puts the special missing value code in the MISSING attribute of the element, with no element content. When importing such a file, SAS ignores the attribute and just produces a standard missing value, since there is no content for the element. BTW, I...

Re: SAS Sample 1728 Was ---> Re: SAS Sample 1727 #3
First, let me admit/acknowledge that I have no knowledge of the history of this thread. Been tied up catching up post SAS Global Forum and post the announcement of sasCommunity.org. But I would like to offer some thoughts regarding Toby's comment: > No as for the sascommunity.org, do we really want a macro library. Well I > would say yes and no. I would like to have one and there are those who > have > paced some Macros on there already. I believe Don and Ron both have, > actually they were on there before the Wiki went public. However, since > people tend to get Ma...

Re: How to filter sas data sets into separate sas data sets #4
Something like this is the old way. You could use a proc sql if you have a new enough version. Increase your buffersize and if you have enough memory you may get it into a hash routine. DATA WORK.NEW; MERGE small (IN=A OBS=500) big ; BY ID_FIELD; IF A=1; RUN; QUIT; RICH -----Original Message----- From: SAS(r) Discussion [mailto:SAS-L@listserv.vt.edu] On Behalf Of Lizette Koehler Sent: Monday, April 02, 2007 10:53 AM To: SAS-L@LISTSERV.VT.EDU Subject: How to filter sas data sets into separate sas data sets Listers, This is my failing point in coding SAS. T...

Re: How to filter sas data sets into separate sas data s ets
I think that both Ron's (as he mentioned) and Richard solutions require that VAR1 is in both datasets. But from the original post, it seemed to me that VAR1 is only in data set 1, and it must be matched to 1 of 3 variables in data set 2 (NODE1, NODE2 or NODE3) to be output to the NEWLIST data set. For this reason, I think a format is one possible approach. Maybe the original poster can clarify this point. Thanks. Jack Clark Research Analyst Center for Health Program Development and Management University of Maryland, Baltimore County -----Original Message----- From: SAS(r) Discussio...

Re: Converting surveymonkey data into sas data #3
Why wouldn't she have to use '0' = 1 '1' = 2 '2' = 2 '3' = 3 '4' = 3 etc. Wouldn't SAS interpret '3-5' to mean exactly 3-5 and not 3 through 5 as I think she intends???? Dennis Fisher toby dunn wrote: > Lorna , > > TRy using the strip function or left and trim functions to get rid of > leading and trailing blanks. > > If it was me I would well do this any ways and I would skip the if > statements and use a format. > > Your problem in V9 reduces to: > > proc format > value $Monkey > '0&...

Re: SAS System Viewer 9.1 unable to open SAS datasets ( SAS 9.1.3)
A question in return: is your table from windows? compressed from another system? and specially with personnel formats hard coded inside? Andre msiddu2000 a �crit : > SAS System Viewer 9.1 was able to open datasets that were created by > V8 engine (SAS 8.2), but is unable to open datasets that are created > with V9 engine (SAS 9.1.3). > > Does this need SAS System Viewer to be upgraded ? > or > Something else needs to be done ? > > -- Andr� WIELKI INED (Institut National d'Etudes D�mographiques) Service Informatique 133 Boulevard Davout 75980 Paris Cedex 20 m�l : wielki@ined.fr t�l : 33 (0) 1 56 06 21 54 ...

Re: How to read a SAS log into a SAS dataset.
lazybone2k@GMAIL.COM wrote: > >Dear SAS-L listers, >This may be the millionth time somebody is asking this question " how to >read a SAS log into a SAS dataset?". I looked at previous posts and >gathered info from various SUGI papers and found a way to get the log and >read it. But i dont know for some reason its not working. Please help me. >I used a Proc printto procedure to print the log to a external file >location and try to read in the log and create a SAS dataset which will >contain info about Filename, Owner name, Group name, Elapsed time, CPU >t...

Re: Deleting SAS Data from a SAS DATASET
One thing you might do is to add an index on the snap_dt to the dataset; = if that's there then you should be able to delete the records in place: proc sql; delete from prod.master_date; where snap_dt =3D "&end_dt"d; quit; run; In both the ways you are trying now you are creating new data sets = rather than deleting records from the current data set; it would seem to = me that a SQL delete statement would be faster than creating new = datasets even if there isn't an index on the date.=20 -Mary ----- Original Message -----=20 From: SUBSCRIBE SAS-L Chandra Gadde=20 To: SAS-L@LISTSERV.UGA.EDU=20 Sent: Friday, August 15, 2008 12:14 PM Subject: Deleting SAS Data from a SAS DATASET Hi All I have several SAS datasets that are very very big. (50GB of size). = Every month, the data is being appended to these datasets. I need to deleted = the data which is greater than 24 months. What is the best method to do = this? Please help me. I tried PROC SQS and DATA STEP. But these two are taking very long = time. Data prod.Master_data; set prod.master_date; if snap_dt =3D "&end_dt"d then delete; run; proc sql; crete table prod.master_date from prod.master_date where snap_dt ne "&end_dt"d; quit; Hi You've got good ideas how to delete the old observations. My modify proposal was wrong. Sorry about that! I still think that changing the data model would be a good idea. Regards Patrick ...

Re: How to change transaction data to individual level data in SAS #3
Tulikaa, What data to you want at the individual level -- overall transaction counts, counts of certain types of transactions, overall dollar value (or similar total), totals within certain categories, etc.? Determine that first (and that probably requires thinking through the intended uses), and then ask how to get that summary. Steve Albert (SAlbert at AOL dot com) On Tue, 11 May 2004 11:05:40 -0700, Tulikaa <tulikaa@YAHOO.COM> wrote: >I need to change transaction level data (multiple items for each >individual) to individual level data in a big file with thousands of >ob...

Web resources about - Re: help with reading ASCII data into SAS #3 - comp.soft-sys.sas

Reading, Massachusetts - Wikipedia, the free encyclopedia
Coordinates: 42°31′32″N 71°05′45″W  /  42.52556°N 71.09583°W  / 42.52556; -71.09583 Coordinates : 42°31′32″N 71°05′45″W  /  42.52556°N 71.09583°W ...

Crystal Palace v Reading score, result, video highlights, goals - Fox Sports Fox sports
Cabaye opened the scoring from the penalty spot in the 85th minute after Jake Cooper was sent off for fouling Yannick Bolasie. Substitute Campbell ...

Crystal Palace v Reading score, result, video highlights, goals
... goals by Yohan Cabaye and Fraizer Campbell have given Socceroos skipper Mile Jedinak’s Crystal Palace a 2-0 victory at second-tier club Reading ...

Oh, the pure pleasure of reading a newspaper
The weekend papers offer a window to the world, unlike the narrow and bitter offerings served up by online news.

Here's Mitt Romney Reading Mean Tweets by Trump and Trump Supporters
... the best tweet. Simon Dumenco, aka Media Guy, is an Ad Age editor-at-large. You can follow him on Twitter @simondumenco. Continue reading ...

(Late) Weekend Reading: Jeffrey Edleson on Sexual Harassment Here at Berkeley Edition
**Jeffrey Edleson**: [A Dean’s Reflection on Campus Sexual Misconduct Cases](http://blogs.berkeley.edu/2016/03/13/a-deans-reflection-on-camp ...

A brain-wave-reading device designed to improve sleep did wonderful and terrifying things to my dreams ...
The last week has been extremely unusual, to say the least. My dreams have been more colorful, detailed, vivid, and realistic than at any other ...

Students Not Reading Email? That’s Their Problem
A survey at Bowling Green State University shows that its students tend to read and respond to emails from their professors, but ignore emails ...

Melissa McBride Couldn't Speak After Reading The Walking Dead Season 6 Finale
The Walking Dead season six finale is going to be a mighty big, nasty pill to swallow.Several cast [...]

Man Learns About Ex’s Pregnancy & Friends’ Erotic Reading Habits Via Google Play
Sharing your review of an app — for good or bad — can help others decide if they should spend the money to add the service to their smartphone ...

Resources last updated: 3/16/2016 4:48:20 PM