f



Re: ods/pdf startpage=never doesn't work anymore in v92? #2

Ya,
I agree with you that some ods pdf functionning has changed
but the use of never yes and now has always being not generating
evident  pageskipping

the lessons are,        i think
1)yes or now has not the same effect in ods pdf
2)creating first a graph on a pdf page permit the addition of another
tabular result which will be added from the head of the page
but if you must put many graph on a pdf page follow a reasonnable
sequence from top to bottom

======================  yours  modified===========
ods listing close;
ods pdf file="d:\temp\v9junk.pdf" notoc style=minimal;
*ods pdf startpage=no;
ods pdf startpage=never;
goptions reset=all  horigin=1 in vorigin=1 in hsize=2 in
vsize= 2in;

proc gplot data=sashelp.class;
plot weight*height;
run;
quit;
proc print data=sashelp.class;
run;

ods pdf startpage=now;
ods pdf close;
ods listing;
=================
as showed with later code, the results are varying  see the excerpt of
the documentation
______
ods listing close;
ods pdf file="d:\temp\v92junk.pdf" notoc style=minimal;
ods pdf startpage=never;
goptions reset=all  horigin=1 in vorigin=1 in hsize=2 in
vsize= 2in;
proc gplot data=sashelp.class;
plot weight*height;
run;
quit;

data class;set sashelp.class sashelp.class   sashelp.class;
run;
proc print data=class;
run;
ods pdf startpage=now;
ods pdf startpage=never;
goptions reset=all  horigin=1 in vorigin=1 in hsize=2 in
vsize= 2in;
proc gplot data=sashelp.class;
plot weight*height;
run;
quit;
goptions   horigin=1 in vorigin=3 in hsize=2 in
vsize= 2in;
proc gplot data=sashelp.class;
plot weight*height;
run;
quit;
ods pdf close;
ods listing;


_________________
ods listing close;
ods pdf file="d:\temp\v92junk1.pdf" notoc style=minimal;
ods pdf startpage=never;
goptions reset=all  horigin=1 in vorigin=1 in hsize=2 in
vsize= 2in;
proc gplot data=sashelp.class;
plot weight*height;
run;
quit;

data class;set sashelp.class sashelp.class   sashelp.class;
run;
proc print data=class;
run;
ods pdf startpage=yes;
ods pdf startpage=never;
goptions reset=all  horigin=1 in vorigin=1 in hsize=2 in
vsize= 2in;
proc gplot data=sashelp.class;
plot weight*height;
run;
quit;
goptions   horigin=1 in vorigin=3 in hsize=2 in
vsize= 2in;
proc gplot data=sashelp.class;
plot weight*height;
run;
quit;
ods pdf close;
ods listing;
_________________

ods listing close;
ods pdf file="d:\temp\v92junk3.pdf" notoc style=minimal;
ods pdf startpage=never;
goptions reset=all  horigin=1 in vorigin=1 in hsize=2 in
vsize= 2in;
proc gplot data=sashelp.class;
plot weight*height;
run;
quit;
data class;set sashelp.class sashelp.class;
run;
proc print data=class;
run;
ods pdf startpage=yes;
ods pdf startpage=never;
goptions   horigin=1 in vorigin=3 in hsize=2 in
vsize= 2in;
proc gplot data=sashelp.class;
plot weight*height;
run;
quit;
goptions reset=all  horigin=1 in vorigin=1 in hsize=2 in
vsize= 2in;
proc gplot data=sashelp.class;
plot weight*height;
run;
quit;
ods pdf close;
ods listing;


from the v92 documentation
STARTPAGE=NEVER | NO | NOW | YES controls page breaks.

    NEVER
    specifies not to insert page breaks, even before graphics procedures.
CAUTION:Each graph normally requires an entire page. The default
behavior forces a new page after a graphics procedure, even if you use
STARTPAGE=NO. STARTPAGE=NEVER turns off that behavior, so specifying
STARTPAGE= NEVER might cause graphics to overprint.

    NO
specifies that no new pages be inserted at the beginning of each
procedure, or within certain procedures, even if new pages are requested
by the procedure code. A new page will begin only when a page is filled
or when you specify STARTPAGE=NOW.
CAUTION: Each graph normally requires an entire page. The default
behavior forces a new page after a graphics procedure, even if you use
STARTPAGE=NO. STARTPAGE=NEVER turns off that behavior.
    Alias:     OFF
Tip:  When you specify STARTPAGE=NO, system titles and footnotes are
still produced only at the top and bottom of each physical page,
regardless of the setting of this option. Thus, some system titles and
footnotes that you specify might not appear when this option is specified.


    NOW
    forces the immediate insertion of a new page.
Tip:     This option is useful primarily when the current value of the
STARTPAGE= option is NO. Otherwise, each new procedure forces a new page
automatically.

    YES
    inserts a new page at the beginning of each procedure, and within
certain procedures, as requested by the procedure code.
    Alias:     ON
    Default:     YES

HTH
Andre


Ya Huang a �crit :
> Hi there,
>
> The following code when runs on v8.2 will generate a one-page report with
> a table on top and a figure on the bottom. But a two-page report with
> first page as the table and second page as the figure if runs on v92,
> which basically means the startpage=never dosen't work anymore. I have a
> routine report based on the startpage=never, this change totally mess up my
> report!
>
> Is there a way to force v92 to behave as v82 for this matter?
>
> Thanks
>
> Ya
>
> ods listing close;
> ods pdf file="c:\temp\v9junk.pdf" notoc style=minimal;
> ods pdf startpage=never;
>
> proc print data=sashelp.class;
> run;
>
> goptions reset=all device=sasprtc horigin=1 in vorigin=1 in hsize=2 in
> vsize= 2in;
>
> proc gplot data=sashelp.class;
> plot weight*height;
> run;
> quit;
>
> ods pdf close;
> ods listing;
>
>

--
   Andr� WIELKI
   INED (Institut National d'Etudes D�mographiques)
   Service Informatique
   133 Boulevard Davout      75980 Paris Cedex 20
   m�l : wielki@ined.fr      t�l :  33 (0) 1 56 06 21 54
0
wielki (636)
1/30/2009 10:35:15 AM
comp.soft-sys.sas 142828 articles. 3 followers. Post Follow

0 Replies
452 Views

Similar Articles

[PageSpeed] 35

Reply:

Similar Artilces:

Re: ods/pdf startpage=never doesn't work anymore in v92?
Utilize the ODS Layout feature to get the desired text, graphics all in one page. You can refer to this SUGI paper<http://www2.sas.com/proceedings/sugi28/148-28.pdf> . Code: ods listing close; ods pdf file="abc.pdf" notoc style=minimal startpage=never; ods layout start; proc print data=sashelp.class; run; goptions reset=all device=sasprtc horigin=1 in vorigin=1 in hsize=2 in vsize= 2in; proc gplot data=sashelp.class; plot weight*height; run; quit; ods layout end; ods pdf close; ods listing; AkshayA! On Thu, Jan 29, 2009 at 2:36 PM, Ya Huang <ya.huang@amylin.com> wrote: > Hi there, > > The following code when runs on v8.2 will generate a one-page report with > a table on top and a figure on the bottom. But a two-page report with > first page as the table and second page as the figure if runs on v92, > which basically means the startpage=never dosen't work anymore. I have a > routine report based on the startpage=never, this change totally mess up my > report! > > Is there a way to force v92 to behave as v82 for this matter? > > Thanks > > Ya > > ods listing close; > ods pdf file="c:\temp\v9junk.pdf" notoc style=minimal; > ods pdf startpage=never; > > proc print data=sashelp.class; > run; > > goptions reset=all device=sasprtc horigin=1 in vorigin=1 in hsize=2 in > vsize= 2in; > > proc gplot data=sashelp.class; > plot weight*height; > run; > quit; ...

Re: ods/pdf startpage=never doesn't work anymore in v92? #4
I have used ODS Layout as described in that paper and it is indeed very nice. HOWEVER, be forewarned that what is described there may not work in 9.2. I created (what I thought) was a simple layout where the page was divided into four equally sized regions (top left, top right, bottom left, bottom right) where I positioned graphs in the top right and bottom left, and proc reports in the other two quadrants. I did that in 9.1.3. When I tested it in 9.2 the graphs were not positioned even close to where they should have been. I reported the problem to SAS TS in December and they still have not been able come up with a solution. And please note that this is not a criticism of TS. ODS Layout was experimental when that paper was written and it is still experimental in 9.1.3 and 9.2. I understand that it is scheduled for production in 9.3. So if you are going to do anything with it, I would encourage you to use 9.2 instead of 9.1.3. Regards, -donh -----Original Message----- From: SAS(r) Discussion [mailto:SAS-L@LISTSERV.UGA.EDU] On Behalf Of Akshaya Nathilvar Sent: Thursday, January 29, 2009 2:56 PM To: SAS-L@LISTSERV.UGA.EDU Subject: Re: ods/pdf startpage=never doesn't work anymore in v92? Utilize the ODS Layout feature to get the desired text, graphics all in one page. You can refer to this SUGI paper<http://www2.sas.com/proceedings/sugi28/148-28.pdf> . Code: ods listing close; ods pdf file="abc.pdf" notoc style=minimal startpage=never; ods layout sta...

Re: ods/pdf startpage=never doesn't work anymore in v92? #3
Hi Andre, I read the doc and noticed the same line: "specifying STARTPAGE= NEVER might cause graphics to overprint" In other word, SAS never committed "NEVER" will behave consistently :-( Too bad, I may have to make many changes to some validated codes. Ya -----Original Message----- From: Andre Wielki [mailto:wielki@ined.fr] Sent: Friday, January 30, 2009 2:35 AM To: Huang, Ya Cc: SAS-L@LISTSERV.UGA.EDU Subject: Re: ods/pdf startpage=never doesn't work anymore in v92? Ya, I agree with you that some ods pdf functionning has changed but the use of never yes and now has always being not generating evident pageskipping the lessons are, i think 1)yes or now has not the same effect in ods pdf 2)creating first a graph on a pdf page permit the addition of another tabular result which will be added from the head of the page but if you must put many graph on a pdf page follow a reasonnable sequence from top to bottom ====================== yours modified=========== ods listing close; ods pdf file="d:\temp\v9junk.pdf" notoc style=minimal; *ods pdf startpage=no; ods pdf startpage=never; goptions reset=all horigin=1 in vorigin=1 in hsize=2 in vsize= 2in; proc gplot data=sashelp.class; plot weight*height; run; quit; proc print data=sashelp.class; run; ods pdf startpage=now; ods pdf close; ods listing; ================= as showed with later code, the results are varying see the excerpt of the documentation ______ ods listing close; od...

ods/pdf startpage=never doesn't work anymore in v92?
Hi there, The following code when runs on v8.2 will generate a one-page report with a table on top and a figure on the bottom. But a two-page report with first page as the table and second page as the figure if runs on v92, which basically means the startpage=never dosen't work anymore. I have a routine report based on the startpage=never, this change totally mess up my report! Is there a way to force v92 to behave as v82 for this matter? Thanks Ya ods listing close; ods pdf file="c:\temp\v9junk.pdf" notoc style=minimal; ods pdf startpage=never; proc print data=sashelp.class; run; goptions reset=all device=sasprtc horigin=1 in vorigin=1 in hsize=2 in vsize= 2in; proc gplot data=sashelp.class; plot weight*height; run; quit; ods pdf close; ods listing; ...

Re: Weird problem with ODS PDF
Mike That is a good idea to add the search strategy keywords to your answer. And, if I have not noticed your (and, maybe, others') doing this, shame on me. Nat -----Original Message----- From: SAS(r) Discussion [mailto:SAS-L@LISTSERV.UGA.EDU] On Behalf Of Mike Rhoads Sent: Friday, February 19, 2010 2:14 PM To: SAS-L@LISTSERV.UGA.EDU Subject: Re: Weird problem with ODS PDF - searching within PDF doesn't work (SAS 9.2 only?) Problem Note 32003: Text searches return different results in PDF files created by ODS PDF http://support.sas.com/kb/32/003.html The Details section for the n...

Re: 'do over' doesn't work #2
Ramsamy, The code that follows will get you into DO OVER. Do not use '*' in the dimension statements. Use the implicit index of _I_ t= o refer to individual elements of the array. DATA TABLE_BIDON; INPUT X1 X2 X3 X4 X5 $; CARDS; 2 . 5 1161 ABELIEN 35 6 3 1336 ALMERIC 82 1 5 1499 . ; RUN; DATA TABLE_BIDON ; SET TABLE_BIDON; ARRAY A_VARNUM _NUMERIC_; ARRAY A_VARCAR _CHARACTER_; DO OVER A_VARNUM; IF A_VARNUM[_i_] =3D . THEN A_VARNUM[_i_] =3D 0; END; DO OVER A_VARCAR; IF COMPRESS(A_VARCAR[_i_]) IN (".","") THEN A_VARCAR[_i_] =3D "Z"; END; RUN; Kind regards, Muthia Kachirayan On Sat, Jan 24, 2009 at 6:40 AM, ash007 <RamsamyAshley@gmail.com> wrote: > hi, > > why my code doesn't work with 'do over'. thanks. > > ash007. > > DATA TABLE_BIDON; > INPUT X1 X2 X3 X4 X5 $; CARDS; > 2 . 5 1161 AB=C9LIEN > 35 6 3 1336 ALM=C9RIC > 82 1 5 1499 > ;RUN; > > DATA TABLE_BIDON (DROP =3D _I); > SET TABLE_BIDON; > ARRAY A_VARNUM[*] _NUMERIC_; ARRAY A_VARCAR[*] _CHARACTER_; > > DO OVER A_VARNUM[*]; > IF A_VARNUM[*] =3D . THEN A_VARNUM[*] =3D 0; > END; > > DO OVER A_VARCAR[*]; > IF COMPRESS(A_VARCAR[*]) IN (".","") THEN A_VARCAR[*] =3D = "Z"; > END; > RUN; > ...

Re: SAS xport to R: doesn't work, at least in Open VMS #2
>> Hi, everybody, >> I am a "long time SAS user" not an R user. I have got a task to >> transfer to R some SAS datatsets. Forst I started to pilot xport files >> created by SAS. However, for some unknown reason, R doesn't recognize >> the xport format created by SAS in Open VMS saying >> >> > test1= read.xport( "NEW_DSIN.XPT") >> Error in lookup.xport(file) : file not in SAS transfer format >> >> I have created these files using several ways. >> 1. >> >> libname xpt xport "NEW_D...

RE: [tao-bugs] BiDirectional GIOP Tests doesn't work anymore #2
Hi, > >>thanks for the answer. > >>Yes, I know, 'AIX is a platform that is not tested at all for TAO', > >>but we are using TAO since about 4 years on AIX with g++ > >>and Bidirectional GIOP was working all the time. > > > > > > We did a lot of work before the summer for AIX with Visual Age. > > But not for g++ :-) No, the customer uses Visual Age. > > Run the server at debug level 10 and look at the output why > the server > > recreates a new connection? Maybe dns is broken? > > No, dns is not broken, but with debug level 10, TAO is saying for the > callback: > > Transport_Cache_Manager::find_i, no idle transport is available > > That is, he simply couldn't find the existing Connection and then > makes a new connection. Could you post a little bit more of the log, maybe it triggers something? Johnny ...

Re: Weird problem with ODS PDF
Problem Note 32003: Text searches return different results in PDF files created by ODS PDF http://support.sas.com/kb/32/003.html The Details section for the note clarifies that "different" means "not correct". ;-) Fortunately, a hot fix is available. Search strategy -- I searched in Samples and SAS Notes for the words ODS, PDF, and search. HTH! Mike Rhoads RhoadsM1@Westat.com -----Original Message----- From: SAS(r) Discussion [mailto:SAS-L@LISTSERV.UGA.EDU] On Behalf Of Jeremy Miles Sent: Friday, February 19, 2010 1:02 PM To: SAS-L@LISTSERV.UGA.EDU Subject: Weird p...

Re: 'do over' doesn't work
Ash As I recall, the first SAS arrays were not subscripted and did not use direct array references. The do over statement simply said, go through the variables listed in the array starting with the first and going to the last. The erro messages that you received were telling you that you should not use the brackets on the array names. From my standpoint, the beauty of the do over is that it makes coding simpler and, given my clumsy fingers, anything that reduces my chances of screwing up are a help. However, these days, I would not choose to use a do over expression in code that was going to be used in the future since someone following me would probably not know of the syntax and the Do over has not been documented in years. The following code worked for me. DATA TABLE_BIDON; INPUT X1 X2 X3 X4 X5 $; infile cards missover;** missover added; CARDS; 2 . 5 1161 AB�LIEN 35 6 3 1336 ALM�RIC 82 1 5 1499 ;RUN; DATA TABLE_BIDON ; * no drop statement needed here; SET TABLE_BIDON; ARRAY A_VARNUM _NUMERIC_; ARRAY A_VARCAR _CHARACTER_; DO OVER A_VARNUM; IF A_VARNUM = . THEN A_VARNUM = 0; END; DO OVER A_VARCAR; IF COMPRESS(A_VARCAR) IN (".","") THEN A_VARCAR = "Z"; END; RUN; Nat Wooding Environmental Specialist III Dominion, Environmental Biology 4111 Castlewood Rd Richmond, VA 23234 Phone:804-271-5313, Fax: 804-271-2977 ash007 <R...

Re: why it doesn't work? #2
The basic problem with this code is the infile statement,the data is not being read correctly.Before you even do anything on the data ,first step should be to write a basic datastep to see that data is loading correctly. data price(keep=name price market price1 price2); length markvalue $50 name market $50; infile "C:\datafile.txt" dsd missover dlm=','; input name $ price market $; run; HTH Mona --- Allan <rakulak@GMAIL.COM> wrote: > I have a raw data file containing 3 fields: Goods > Name, price, and > Markets. The Markets field is seperated by >...

Re: 'do over' doesn't work #3
On Sat, 24 Jan 2009 14:25:41 +0000, karma <dorjetarap@GOOGLEMAIL.COM> wrote: >Hi Ash, > >What is the purpose of your code? Looking at the test data it appears >you want to replace missing numeric values with the number zero and >missing character data with a "Z". Replacing missing numerics with >zero seems like a pretty standard thing, and therefore there are a few >ways to handle this in SAS. Yes. See http://www.sascommunity.org/wiki/Generating_Zeroes_in_PROC_TRANSPOSE_Output or http://tinyurl.com/abozdc >Replacing missing character variables with >a character, on the other hand is a bit more difficult. > >You could either approach it with your array method as such: > >data have; > infile cards missover; > input x2 x1 x3 x4 x5$ x6$; > cards; >2 . 5 1161 AB�LIEN ANIEL >35 6 3 1336 ALM�RIC >82 1 5 1499 > ;run; > >data array_method; > set have; > array a_varnum _numeric_; > array a_varchar _character_; > do over a_varnum; > if missing(a_varnum) then a_varnum = 0; > end; > do over a_varchar; > if missing(a_varchar) then a_varchar = 'Z'; > end; > run; >proc print;run; > >An alternative, on your test data would also be to use a Dorfmanesque >peek/poke solution. This will only work for provided all your >character variables are a length of 8. The array statements are not >required, but it will force the...

'=' command doesn't work? #2
Hi, i have a strange problem. It seems so simple, but : disp(['temp2=',num2str(temp2(end))]); Ergebnis(j) = temp2(end); disp(['Ergebnis=',num2str(Ergebnis(j))]); the result is : temp2=184.37 Ergebnis=1 why is Ergebnis(j) still 1? It should be 184.37. Where is the problem, i am quite confused right now. "martin Müllinger" <zettinger@gmx.de> wrote in message <i9m736$gu7$1@fred.mathworks.com>... > Hi, > > i have a strange problem. It seems so simple, but : > > disp(['temp2=',num2str(temp2(end))]); &g...

Re: 'do over' doesn't work #4
Hi Ash, What is the purpose of your code? Looking at the test data it appears you want to replace missing numeric values with the number zero and missing character data with a "Z". Replacing missing numerics with zero seems like a pretty standard thing, and therefore there are a few ways to handle this in SAS. Replacing missing character variables with a character, on the other hand is a bit more difficult. You could either approach it with your array method as such: data have; infile cards missover; input x2 x1 x3 x4 x5$ x6$; cards; 2 . 5 1161 AB�LIEN ANIEL 35 6 3 1336 ALM�RIC 82 1 5 1499 ;run; data array_method; set have; array a_varnum _numeric_; array a_varchar _character_; do over a_varnum; if missing(a_varnum) then a_varnum = 0; end; do over a_varchar; if missing(a_varchar) then a_varchar = 'Z'; end; run; proc print;run; An alternative, on your test data would also be to use a Dorfmanesque peek/poke solution. This will only work for provided all your character variables are a length of 8. The array statements are not required, but it will force the variables to occupy contiguous space which is required here. If anyone can suggest a way to make handling variable length character variables using this technique, I would very interested. data peek_poke; array nums [*] x1-x4; array chars [*] $x5 x6; set have; _n_ = dim(nums)*8; call poke(tranwrd(peekc(addr(x1),_n_),put(.,rb8.), put...

Re: why the array doesn't work #2
Anindya It looks like the double hyphen is not being recognized as a specification for a list of variables from the starting point to the end. The code in the original post was involved enough that I could only guess at what he wanted but could not be sure. Nat Nat Wooding Environmental Specialist III Dominion, Environmental Biology 4111 Castlewood Rd Richmond, VA 23234 Phone:804-271-5313, Fax: 804-271-2977 Anindya Mozumdar <anindya.lugbang@ GMAIL.COM> To Sent by: "SAS(r) SAS-L@LISTSERV.UGA.EDU Discussion" cc <SAS-L@LISTSERV.U GA.EDU> Subject Re: why the array doesn't work 03/16/2009 01:14 PM Please respond to Anindya Mozumdar <anindya.lugbang@ GMAIL.COM> On Mon, Mar 16, 2009 at 9:52 PM, Nat Wooding <Nathaniel.Wooding@dom.com> wrote: > Terry > > Try removing the "of" from your mean function. The error message > disappeared when I dropped it. > I found something interesting. In the code that follows, s is 4 while t is 6 - data test; x = 1; y = 2; z = 3; run; data _null_; set test; array a{3} x y z; ...

Re: SphericalPlot3D doesn't work #2
Works fine with v5.2 on my Mac. Try starting with a fresh kernel. Bob Hanlon ---- David <dja.mckechan@gmail.com> wrote: > SphericalPlot3D doesn't work for me. > > I HAVE loaded the graphics package. it just returns the same input as though I am defining a function: > > IN: << Graphics`ParametricPlot3D` > SphericalPlot3D[2, {theta, 0, Pi}, {phi, -Pi, Pi}] > > OUT: SphericalPlot3D[2, {theta, 0, Pi}, {phi, -Pi, Pi}] > > I've seen that other people have had this problem but I haven't seen a solution anywhere. >...

RE: Up Arrow doesn't work on form #2
Rats. I just noticed that this was already resolved. We now return you to your regularly scheduled newsgroup. --EEM > -----Original Message----- > From: Everett Mills [mailto:eemills@nationalbeef.com] > Sent: Tuesday, September 12, 2006 10:50 AM > To: informix-list@iiug.org > Subject: RE: Up Arrow doesn't work on form >=20 > Chad- > The problem is that you have separate input statements for each > of the data items. Try this instead: >=20 > MAIN > OPEN FORM txr8849 FROM "txr8849" > DISPLAY FORM txr8849 > INPUT BY NAME rptdest, mv_begin_date, mv_end_date, mv_sch_code, > mv_product > CALL run_report_tx8849() > END MAIN >=20 > --EEM >=20 > > -----Original Message----- > > From: Chad [mailto:c320f@yahoo.com] > > Sent: Monday, September 11, 2006 4:40 PM > > To: informix-list@iiug.org > > Subject: Up Arrow doesn't work on form > > > > I have created my first form and 4GL report, but when navigating the > > form the up arrow key doesn't put the cursor to the previous field. I > > can only go forward through the fields with either enter, down arrow > or > > right arrow. Isn't it a default for up arrow or left arrow to go to > > the previous field? The report and form were compiled with compiled > > 4gl 7.32 on Slackware Linux. I tried setting > > ...

RE: wxMac: wxGetKeyState(WXK_SHIFT) doesn't work? #2
Hi toolbar tools are not wxButtons but native icon buttons that handle the clicks themselves, so the abstraction level should be the toolbar events and not lower HTH STefan > -----Original Message----- > From: Jim Battle [mailto:frustum@pacbell.net] > Sent: Donnerstag, 21. April 2005 08:11 > To: wx-users@lists.wxwidgets.org > Subject: Re: wxMac: wxGetKeyState(WXK_SHIFT) doesn't work? >=20 >=20 > I've made another refinement and updated the test program > (minimal_tb.cpp) again. >=20 > I discovered that on wxmac, wxToolBar::SetMar...

Re: DNS reverse lookup doesn't work from outside #2
>>>>> "vijay" == vijay <vijay@buydeal.com> writes: vijay> Hi Kevin/list users, I have Dedicated T1 line from SBC, I vijay> configured Bind 9 on Solaris box for our domain by name vijay> buydeal.com, dns-01.buydeal.com is the name-server which is vijay> bind to 68.249.200.20. You can check this online it's not vijay> doing reverse lookup, but on the same vijay> system(dns-01.buydeal.com) it does reverse lookup. Talk to your ISP. They have setup the reverse DNS entry for this IP address (20.200.249.68.in-addr.arpa) as a CNAME which points at 20.0.200.249.68.in-addr.arpa. But there's no delegation for 0.200.249.68.in-addr.arpa. If you can find someone clueful at your ISP, you should just tell them that reverse lookups don't work for 68.249.200.20 (and the rest of your /25??) and they will be able to figure it out from there. They'll need to fix this, probably with some co-ordination with you. You could make your name servers serve this 0.200.249.68.in-addr.arpa zone and populate it with PTR records for your hosts. Then they could delegate the zone to your servers. For more details read RFC2317 or do a google search for "classless reverse delegation". In fact I just did this and found a reference to a document from your ISP: The Preferred Method for classless reverse delegation of SBC LAN IP blocks should be the first option applied for most ...

Re: Macro do loop - %if &var
On Wed, 8 Aug 2007 10:44:26 -0400, Chung Li <cli2@RDG.BOEHRINGER-INGELHEIM.COM> wrote: >Hi all, > >Thanks for the help of the variable list. I have another problem with using >the macro loop: > > %do i = 1 %to 12; > [ %if den_&i > 0 ] > %then %do; > percent_&i = round(num_&i/den_&i *100,.01); >%end; > %end; > > >Note: den_&i is a numeric variable, It (den_&i) resolves to a numeric variable *in your DATA step code*. In macro code, there are ...

Re: Moderate doesn't work (no such thing as moderate circumcized) #2
> > > All or nothing. Republican or Democrat. > > > > See the tradition comes from Abraham Mustafa Arafat Lincoln as a Continental tradition, > > 4 scores and 4 thousand years ago, he punked his appearance at age 99 himself > > with a sharp tool. As an ancient punk, he declared his appearance 'perfect' as > > God does not forskin women, thus the perfect admirable holy dick in the > > tradition of punk traditon, and there is something about it, unspeakable > > and voodoo. But from this we find the secrets of moderation, and God and >...

Re: Short Extension Doesn't Work with 9.1 #2
Yup, that is the way it works. When I asked the question of SAS Tech Support, they told me that 9.2 (I believe) would have capability to read (not write) short file extensions - for just the reason you give. HTH, Rob Rohrbough > -----Original Message----- > From: Howard Schreier [mailto:Howard_Schreier@ITA.DOC.GOV] > Sent: Friday, September 03, 2004 4:10 PM > Subject: Short Extension Doesn't Work with 9.1 > > > Here's the puzzlement. > > I regularly receive SAS datasets from somebody and accumulate them in a > library. They always have .SD7 as the fi...

tar -N'2 days ago' doesn't work
Hi! Completely sorry if this is the wrong group, I am a new news user. That's what I did: kralg@hell:~/cuccos/proba$ touch -d'3days ago' file1 kralg@hell:~/cuccos/proba$ touch -d'day ago' file2 kralg@hell:~/cuccos/proba$ touch -d'year ago' file0 kralg@hell:~/cuccos/proba$ touch file3 kralg@hell:~/cuccos/proba$ ls -l total 0 -rw-r--r-- 1 kralg kralg 0 Apr 29 2003 file0 -rw-r--r-- 1 kralg kralg 0 Apr 26 00:31 file1 -rw-r--r-- 1 kralg kralg 0 Apr 28 00:31 file2 -rw-r--r-- 1 kralg kralg 0 Apr 29 00:31 fi...

Re: 'just' option doesn't work in proc format ?
Hi, The format of the format needs to be a little different ... Try proc format; invalue yy (just default=20) '1.2' = 0 ; run; The options for the invalue need to be in brackets, otherwise PROC FORMAT will think the first value it has to format is "just1.2". The "default=20" part is required, otherwise the comparisons will be done within the length of the format string (3 in this case for "1.2"). Regards ++ Guido. On 27/09/2007, Ya Huang <ya.huang@amylin.com> wrote: > > Hi there, > > According to SAS Online Doc, 'JUS...

Web resources about - Re: ods/pdf startpage=never doesn't work anymore in v92? #2 - comp.soft-sys.sas

Resources last updated: 3/16/2016 12:42:52 PM